Hello Awesomes!!
we notice very common issue on CustomROMS for our device
Grand 2 (G7102, MS013g)
BLANK SCREEN on Wakeup.
scenario is when we install the new rom everything seem to work untill screen goes off then BAM!!
BLACK SCREEN even light into on "but touch buttons are lighting up"
if u keep clicking power button randomly it'll work for random time then it wont work again.
Notice
I notice this happens with me and other phones that has
Baseband Version:
G7102XXUBNK1
but never happens on users using phone that has:
Baseband Version:
XXXXXXXXNH1
<<<< XXX because i'm not sure what is the version exactly >>>>
Why this thread is Open?!
I want to help Devs to keep track on which devices has that issue (blackout on wakeup)
and to try to group up how many versions of baseband been released by Samsung. for now i know these 2 only so please check your baseband version and give us a comment if its not NH1 nor NK1 then please submit to the Poll eitherways.
CHALLENGE
now for a step from me "i'm an NK1 user" i need an "NH1" user to upload his EFS partition to googledrive or somewhare using an app called EFS Backup (get it from play store) i'll try to flash it on my phone to see if i'll have any issues and if that would solve the blackout issue.
If you needed help with that just ask me i'll guide you in a reply.
LET THE WAR AGAINST BLACKOUT BEGIN!!
reserved
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
abcd1232 said:
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
View attachment 3276260
Click to expand...
Click to collapse
thank you very much! however your phone is NH1 not NK1
abcd1232 said:
My phone is nk1 and have blackscreen bug.
Efs partition dropbox.com/s/iwcy7vl52it5v1n/efs_backup_2015-04-22_21-39-08.tar.gz?dl=0
View attachment 3276260
Click to expand...
Click to collapse
hey link not working
i have this issue when i installed blisspop official and cm 13
let me have the right to fight against black issue
---------- Post added at 12:45 PM ---------- Previous post was at 12:14 PM ----------
xwaleedooox said:
hello awesomes!!
we notice very common issue on customroms for our device
grand 2 (g7102, ms013g)
blank screen on wakeup.
scenario is when we install the new rom everything seem to work untill screen goes off then bam!!
Black screen even light into on "but touch buttons are lighting up"
if u keep clicking power button randomly it'll work for random time then it wont work again.
notice
i notice this happens with me and other phones that has
baseband version:
G7102xxubnk1
but never happens on users using phone that has:
Baseband version:
Xxxxxxxxnh1
<<<< xxx because i'm not sure what is the version exactly >>>>
why this thread is open?!
i want to help devs to keep track on which devices has that issue (blackout on wakeup)
and to try to group up how many versions of baseband been released by samsung. For now i know these 2 only so please check your baseband version and give us a comment if its not nh1 nor nk1 then please submit to the poll eitherways.
challenge
now for a step from me "i'm an nk1 user" i need an "nh1" user to upload his efs partition to googledrive or somewhare using an app called efs backup (get it from play store) i'll try to flash it on my phone to see if i'll have any issues and if that would solve the blackout issue.
If you needed help with that just ask me i'll guide you in a reply.
let the war against blackout begin!!
Click to expand...
Click to collapse
cant we just flash a stock rom with this baseband version
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
PULKIT SINGH said:
hey link not working
i have this issue when i installed blisspop official and cm 13
let me have the right to fight against black issue
---------- Post added at 12:45 PM ---------- Previous post was at 12:14 PM ----------
cant we just flash a stock rom with this baseband version
Click to expand...
Click to collapse
https://samsung-firmware.org/downlo... DUOS/9j90/XSE/G7102XWUBNI2/G7102OLBBNI2/#_=_
thank you very much! however your phone is NH1 not NK1
Related
Currently I'm on a discontinued ROM SkyFall which works fine. I've used xposed to customize to my liking. It's a 1.58.502.1 base rom. What would be the advantages to upgrading to a 4.4.3 rom or higher based rom like Sky Dragon? Will I see enough improvements or additions to warrant the hassle of backing up everything and starting fresh? Any thoughts appreciated. P.S. Only talking about stock roms, not interested in any others.
Well I was using Viper One and missed the feel of my Nexus 5 so I to chose Skydragon and its definitely worth it.here is some pics of the Skydragon version I run and a pic of how small the System is .simple and smooth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oh and I'm on the same firmware base
Well there is a sinless sense version, but I'm not sure if its been updated lately..I'm pretty sure you'd need to update your firmware though
---------- Post added at 04:45 AM ---------- Previous post was at 04:44 AM ----------
this is InsertCoin (Sense)
http://forum.xda-developers.com/showthread.php?t=2704539
Here's Sinless (Sense)...
http://forum.xda-developers.com/showthread.php?t=2722578
jxcorex28 said:
Well there is a sinless sense version, but I'm not sure if its been updated lately..I'm pretty sure you'd need to update your firmware though
That's the main issue. I've been looking at the international roms but someone mentioned that they don't play well with our radio. Now that 4.4 is out I really want to upgrade my firmware but it looks daunting according to the forums. I really need a good guide to walk me through. I've read a few guides in the international forums but they are a little vague. I'm s-off and could go super cid if needed. Do I just download a firmware off the forums and fastboot flash or is there more to it?
Click to expand...
Click to collapse
I just flashed the T-Mobile L24G radio and my data is doing great.
S-OFF and Supercid required
Radio link
http://forum.xda-developers.com/showthread.php?t=2736921
http://forum.xda-developers.com/showthread.php?t=2824048
Take a look at the above link. The links created by Skulldreamz...He doesn't have the latest .7 firmware included though. I'm sure he'd be able to help you get it. With these zips (included on the 1st page). The easiest and most hassle way of flashing these firmware zips is naming the zip (0P6BIMG.zip), and flashing while in boot loader mode...you can also remove the contents of other firmware zips. Using a file explorer such as ES or Solid Explorer, delete the recovery .img and boot.img. then rezip the file,rename to 0P6BIMG, and flash in bootloader
---------- Post added at 11:55 PM ---------- Previous post was at 11:48 PM ----------
You should ask skulldreamz about the tmobile firmware he's included in his thread. Skulldreamz removed the recovery.img from those zips (I believe). If you had a custom revovery, then you flashed a firmware zip that hadn't been modified and still contained the recovery.img. you could have unexpected results. If you flash a firmware zip like that you have to fastboot flash another recovery omg after you flash the firmware zip. You're on Tmobile, so it's best to ask skulldreamz,mike1986, or sneakyghost as those guys are more knowledgeable on firmwares
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Do not flash AT&T firmware on a T-Mobile phone. I do not know if having s_off alone will work. I don't know what would happen, but I'm sure nothing good would happen...ask the guys I mentioned in my previous replies...
Flashed ROM and radio and have no issues at all
Nice...did you find T-Mobile firmware ?
jxcorex28 said:
Nice...did you find T-Mobile firmware ?
Click to expand...
Click to collapse
Who are you asking ?
[HELP PLZ] s6 edge G925I fingerprint adding problem "check if home button is clean"
Hello i have a samsung galaxy s6 edge SM-G925I when i want to add a fingerprint an error appears i recently restored the phone and i didnt had this problem before restore every thing was working fine i tried every thing and nothing worked for me please help the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
im running marshmallow last update 6.0.1 and i dont have warranty
same here
I tried the following with no luck:
1. clear credentials
2.clear fingerprint app cache and data
3.factory reset
4.Downgrading
5.wiping all system via TWRP and re-install older firmware
ALL WITH NO LUCK
NOTE : Fingerprint sensor is functioning , as I can clear the error message above via fingerprint so it's not damaged or corrupted
i'm sure that's 100% software issue btw I wiped everything with no luck
Go to nougat
StonebridgeGr said:
Go to nougat
Click to expand...
Click to collapse
I'm on nougat
lordmada said:
I'm on nougat
Click to expand...
Click to collapse
On marshmallow you had the same problem ?
StonebridgeGr said:
On marshmallow you had the same problem ?
Click to expand...
Click to collapse
Yes
lordmada said:
Yes
Click to expand...
Click to collapse
Can you please change the language to English so I can understand what is says? Thank you
StonebridgeGr said:
Can you please change the language to English so I can understand what is says? Thank you
Click to expand...
Click to collapse
it says make sure that home key is clean and dry and then try again
lordmada said:
it says make sure that home key is clean and dry and then try again
Click to expand...
Click to collapse
Try this ..a guy on another forum said
Solution 1)Heat the bottom of the phone, where the home button is with a hair dryer, it worked for me and I had the exact issue
Solution 2)https://www.fonepaw.com/android-lock/fingerprint-not-working-samsung.html
StonebridgeGr said:
Try this ..a guy on another forum said
Solution 1)Heat the bottom of the phone, where the home button is with a hair dryer, it worked for me and I had the exact issue
Solution 2)https://www.fonepaw.com/android-lock/fingerprint-not-working-samsung.html
Click to expand...
Click to collapse
none of these are working
note : fingerprint sensor or home button is OK , that's a software issue
I appreciate your help
---------- Post added at 08:51 AM ---------- Previous post was at 08:49 AM ----------
I even flashed a custom kernel with no luck
Can u give me that stock kernel?
SM-G925I_LA
G925IDVU1AOD1
SM-G925I_LATIN_LL_Opensource.zip
EDIT : DONE
lordmada said:
none of these are working
note : fingerprint sensor or home button is OK , that's a software issue
I appreciate your help
---------- Post added at 08:51 AM ---------- Previous post was at 08:49 AM ----------
I even flashed a custom kernel with no luck
Can u give me that stock kernel?
SM-G925I_LA
G925IDVU1AOD1
SM-G925I_LATIN_LL_Opensource.zip
EDIT : DONE
Click to expand...
Click to collapse
Hey. So now the fingerprint working well?
StonebridgeGr said:
Hey. So now the fingerprint working well?
Click to expand...
Click to collapse
No
let me share my experience cuz I saw in google that this fingerprint error is breaking out to the whole world
I flashed a custom rom alongside with that custom kernel (it was noble rom s8 port)
no luck
so I managed to flash a nougat stock rom , and accidently I detached usb cable during download mode
that brought me to emeregeny mode . so I used samsung SmartSwitch for an emergency recovery
that mode managed to get my mobile back like new (stock kernel , stock marshmallow)
and guess what?? fingerprint isn't working !
it's the part of ROMDRIVE that store KNOX status that I can't reach
that's the key
now what?
https://drive.google.com/open?id=0B4oPxupgegT_R1V1T18wa1liZTA
Video link - https://www.youtube.com/watch?v=7LgQS4z5OzI
About new os 6.0.1 for A500G
Ive upgraded my a5 to android 6.0.1 with the band version A500GXXU1CPH4 and found noting new other than the icons and security patch with Marshmallow os; still the skin of the dialler, systemui, etc remains the same as in the lollipop.
Google play services error after updating
Can anyone help me...after flashing the firmware everything is working fine except google play store and google play services.
It shows a notification that "Google play services wont work unless you update google play services". And after I tap that notification google play store is opened but it does not load anything its just stuck like that...blank...I can swipe from left to see my account logged in but cannot access the play store to update or download...its just white blank
Please help.
Thanks
Just update from the play store
Go to play store and update the Google play service buddy; It will take a while at tyms . Cheers
A500g google play services error
Google play store isn't working...when i open it...it is just blank...I cant download anything its blank. @meemb
Try after a reboot
Yesterday the same happened to me. I just restarted my mobile and tried; the play store showed up and I happend to update the google play service. Also check ur Internet connectivity buddy
I rebooted but it didn't work. Did a factory reset too...even though it doesn't work. After factory reset it is stuck in checking info when i open google play.
Came back to lollipop. I downloaded the 6.0 firmware from updato.com
Oops!
I am unsure buddy but in my case I just upgraded my phone via OTA. If the os Is not installed then download the same from sammobile and install it via odin by putting ur phone in download mode. this will do.
There is no 6.0.1 firmware for a500g in sammobile
---------- Post added at 01:30 PM ---------- Previous post was at 01:29 PM ----------
I didn't get the OTA update also..
You check the settibgs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is I got my phone upgraded to; If ur phone is a500g you should get this update once you hit software update in settings menu.
---------- Post added at 01:39 PM ---------- Previous post was at 01:37 PM ----------
Sent from my SM-A500G using XDA-Developers mobile app
It's showing this whenever I hit software update
My current firmware
May be the update just dint hit ur locality. But I thing you will receive it soon but not sure why you didn't get it.
Sent from my SM-A500G using XDA-Developers mobile app
Thanks for your help..will wait...hope i get it soon
Yea buddy... Cheers
Sent from my SM-A500G using XDA-Developers mobile app
Can you tell me the new features you noticed after the update...It can be helpful to other people too..
Thanks
do you want a google drive link?
simaan37 said:
There is no 6.0.1 firmware for a500g in sammobile
---------- Post added at 01:30 PM ---------- Previous post was at 01:29 PM ----------
I didn't get the OTA update also..
Click to expand...
Click to collapse
do you want a google drive link?
No new features
simaan37 said:
Can you tell me the new features you noticed after the update...It can be helpful to other people too..
Thanks
Click to expand...
Click to collapse
Theres no new update. it seems same like the old lollipop
ash_003 said:
Theres no new update. it seems same like the old lollipop
Click to expand...
Click to collapse
sammy wont give any new features
we must port roms to make device more useful:laugh:
:good: @ash_003
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
ash_003 said:
do you want a google drive link?
Click to expand...
Click to collapse
Yeah...please give me the link...my variant is A500G
Hi, i have a problem.
I changed rom in my g850f to RR marshmallow from kitkat 4.4.4, and when i back to kitkat again, fingerprint in my phone stopped working.
Could you help me solve this problem?
ME TOO =(((
Me also
Same thing with me. Went back to stock ROM, but no fingerprint sensor
go into *#0*# senior
and can't find fingerprint
system/data >>>>>can't find fingerprint.key
i guess something lost
taiwanboy said:
go into *#0*# senior
and can't find fingerprint
system/data >>>>>can't find fingerprint.key
i guess something lost
Click to expand...
Click to collapse
i think you should go to all Apps in Application Manager tab and search for Fingerprints and just Force stop and clear the data of Fingerprints..
---------- Post added at 06:57 AM ---------- Previous post was at 06:56 AM ----------
adianasiewicz said:
Hi, i have a problem.
I changed rom in my g850f to RR marshmallow from kitkat 4.4.4, and when i back to kitkat again, fingerprint in my phone stopped working.
Could you help me solve this problem?
Click to expand...
Click to collapse
i think you should go to all Apps in Application Manager tab and search for Fingerprints and just Force stop and clear the data of Fingerprints..
---------- Post added at 06:57 AM ---------- Previous post was at 06:57 AM ----------
k33p3rpb said:
Same thing with me. Went back to stock ROM, but no fingerprint sensor
Click to expand...
Click to collapse
i think you should go to all Apps in Application Manager tab and search for Fingerprints and just Force stop and clear the data of Fingerprints..
Hi, I have similar problem. For some time I've used RR and today I've returned to stock but my fingerprint scanner didn't work I did test in HW module test and it passed all also version of sensor I correct but when I try to set a fingerprint sensor just doesn't respond, no errors. I tried deleting fingerprint app data but it didn't help. I can add some screenshots if needed.
piotrekkoz said:
Hi, I have similar problem. For some time I've used RR and today I've returned to stock but my fingerprint scanner didn't work I did test in HW module test and it passed all also version of sensor I correct but when I try to set a fingerprint sensor just doesn't respond, no errors. I tried deleting fingerprint app data but it didn't help. I can add some screenshots if needed.
Click to expand...
Click to collapse
Please add some Screenshots if possible. ..
Please add some Screenshots if possible. ..
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's it. The last one is from EpsilROM which I'm using right now but still fingerprint is not working, with no errors just nothing happens when I swipe my finger over it. I was thinking if maybe flashing firmware with PIT and re-partition could help.
Edit: link to folder with screenshots because these above are not working https://drive.google.com/open?id=0B40L8OjMeMLlZkI1bEQxUDY1U0E
piotrekkoz said:
That's it. The last one is from EpsilROM which I'm using right now but still fingerprint is not working, with no errors just nothing happens when I swipe my finger over it. I was thinking if maybe flashing firmware with PIT and re-partition could help.
Edit: link to folder with screenshots because these above are not working https://drive.google.com/open?id=0B40L8OjMeMLlZkI1bEQxUDY1U0E
Click to expand...
Click to collapse
Try Flashing the ROM again and do a complete Wipe.
Gaurav k21 said:
Try Flashing the ROM again and do a complete Wipe.
Click to expand...
Click to collapse
I've tried but it didn't help
Is this ROM true?
https://androidfilehost.com/?fid=890129502657592149
well, there is only one way to find out.
(flash it).
Fake, I brushed.
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
twrp 3.2.1 error 6?
Screenshot please
Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
How do you mean by brushing? Can it actually be flashed successfully?
Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
It seems that it gives error 6 on TWRP. Will inspect the system and also the flashing/brushing script later.
---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------
dustmalik said:
How do you mean by brushing? Can it actually be flashed successfully?
Click to expand...
Click to collapse
Brushing is equivalent of flashing, but for Chinese people. In other word, brushing means flashing, but in Chinese.
---------- Post added at 02:43 PM ---------- Previous post was at 01:57 PM ----------
I have a some mixed news, good and also bad.
The good news is, the "system.new.dat.br" file is indeed Android P.
But the bad news is, the person who made the ZIP, doesn't know how to port Treble ROM.
He just copy-pasted the Full fastboot image of Pixel 2 XL, which contain the file of the fastboot & bootloader for Pixel 2 XL only to run those and also android on it. Which will brick our phone.
Also, he messed up with the scripts.
So, I recommend to ignore all of @IkerST's Android P releases.
Tenshou170 said:
He just copy-pasted the Full fastboot image of Pixel 2 XL, which contain the file of the fastboot & bootloader for Pixel 2 XL only to run those and also android on it. Which will brick our phone.
Also, he messed up with the scripts.
So, I recommend to ignore all of @IkerST's Android P releases.
Click to expand...
Click to collapse
I don't really it would be a brick, just error in TWRP or something similar but not a brick. Other than that, the mounting point of system is also wrong.
The rom is mine, I got a mess in my google cloud and used the taimen build instead of mido (wich isn't building), also the zip file isn't flasheable, it won't work on this device, and I recommend you to not try to install any builds I upload until I post them properly on xda.
Any mod please close this thread
IkerST said:
The rom is mine, I got a mess in my google cloud and used the taimen build instead of mido (wich isn't building), also the zip file isn't flasheable, it won't work on this device, and I recommend you to not try to install any builds I upload until I post them properly on xda.
Any mod please close this thread
Click to expand...
Click to collapse
Hey, at least you tried
Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
***abcd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gtrmdhn said:
Screenshot please
Click to expand...
Click to collapse
Jishan Ali said:
Click to expand...
Click to collapse
Oops, it's broken.
When we get Android 9 for moto e2 surnia device?
If your phone has treble rom and treble twrp
Go to
https://forum.xda-developers.com/redmi-note-4/how-to/experimantal-android-p-dp3-t3817446