Hi,
This is the way to use Xposed on lollipop 5.0.2 (14.5.A.0.242) without bootloop on Odexed Rom.
No need to wipe cache and dalvik on every boot.
Tested On 6802 with locked Bootloader.
instruction:
1- flash PRF 14.5.A.0.242 with dualrecovery & First boot.
2- reboot in recovery and Wipe Cache and davilk,
3- flash this files from this topic.
4- Reboot into system, Install the .apk of Xposed for Lollipop
5- Reboot again in recovery and just flash the .zip of Xposed.
And now, no bootloop after each reboot
Thanks to @xander59
Source
I can vouch this method works very well but I needed a lot of stuff that was deleted. So after you flash the firmware, dont boot but use a recovery file manager. Manually delete folders of most apps listed in the same thread as OP posted. and make sure you reboot after every install of an app and xposed module for first 10-20 times. In this way, you will know what you just installed that gave you boot loop and you can just delete the file through recovery instead of restoring nadroid backup. I have nandroid backup ready just in case and sometimes just installing two apps from play store gave me a bootloop and when i installed the same apps after a reboot of each other, they worked fine. Anyone wondering the apps were maps and gmail.
Yes, now with the discover of @ondrejvaroscak here, it's probably more safe to delete the apps that you don't use instead of remove all the apps of the script
xander59 said:
Yes, now with the discover of @ondrejvaroscak here, it's probably more safe to delete the apps that you don't use instead of remove all the apps of the script
Click to expand...
Click to collapse
I think that generally safe is also using the debloaters or debloated ROM that guys made, because these are thoroughly tested. Its more matter of preference. I made my research just because I was curious about what is behind bootloops..
Unknown_2517 said:
Hi,
This is the way to use Xposed on lollipop 5.0.2 (14.5.A.0.242) without bootloop on Odexed Rom.
No need to wipe cache and dalvik on every boot.
Tested On 6802 with locked Bootloader.
instruction:
1- flash PRF 14.5.A.0.242 with dualrecovery & First boot.
2- reboot in recovery and Wipe Cache and davilk,
3- flash this files from this topic.
4- Reboot into system, Install the .apk of Xposed for Lollipop
5- Reboot again in recovery and just flash the .zip of Xposed.
And now, no bootloop after each reboot
Thanks to @xander59
Source
Click to expand...
Click to collapse
Worked perfectly on z ultra on stock customized DE lollipop and I was one of the ones with the bootloop issues
Thanx
Link dead !
Can you update it please ?
Which version do we use for z ultra?
WildBit said:
Worked perfectly on z ultra on stock customized DE lollipop and I was one of the ones with the bootloop issues
Thanx
Click to expand...
Click to collapse
Which version did you use? Thanks
Related
Hi,
I've recently rooted my phone and installed my first ROM - Resurrection Remix - and it's notified my of an update (v3.1.3) and downloaded the zip for me. My question is how do I safely update RR?
When I first installed it I had to perform a number of steps wiping and clearing things before installing from a zip using CWM. Hopefully I don't have to do all of these as I don't want to have to completely reinstall every update, but do I have to do any of them still or do I just install from the zip in CWM without any other steps?
abc.mikey said:
Hi,
I've recently rooted my phone and installed my first ROM - Resurrection Remix - and it's notified my of an update (v3.1.3) and downloaded the zip for me. My question is how do I safely update RR?
When I first installed it I had to perform a number of steps wiping and clearing things before installing from a zip using CWM. Hopefully I don't have to do all of these as I don't want to have to completely reinstall every update, but do I have to do any of them still or do I just install from the zip in CWM without any other steps?
Click to expand...
Click to collapse
Have you read the first posts of the ROM thread?
Maybe there is a description of how to install the update.
If not, then you can just flash the update zip file in CWM recovery and try to reboot normally.
If everything works fine ... that's it.
If you have issues, boot into recovery, wipe cache and Dalvik cache and reboot normally again.
If that does not help, then you might have to wipe data (do a factory reset) in recovery.
But I think that these steps are not needed as you are already on this custom ROM.
(Usually you only have to do the complete wipe steps when coming from another / stock ROM - and the other way round.)
Good luck !
P.S.: Always create a nandroid backup before flashing. So you are able to "go back" if needed.
Hello.
I want to instal parandroid on z ultra and i have some questions:
1) where can i found aospa/cm11 ZIP (from step 2 of instalation guid)
2) witch 4+ version is stable (nonbeta)
3) on z ultra have i the lateral bar with the home buton?
4) on this rom can move the app to sd, because on stock rom i can't(phone is rooted)
5) can i instal it on a full stock phone(only bootloader is unlocked, no recovery,no root), because i guess that the boot.img (from step 2 of instalation guid) is a kernel with recovery.
Thanck you.
Ps i tried to ask Beerbong or in his thread but i coudn't because i don't have 10 post.
1) In the CM11 thread
2) the boot.img is inside the CM zip
3) I don't understand
4) I don't know
5) Yes. You're right. That's why you have to flash the boot.img first, so you get Recovery
Sent from my C6833_GPe using Tapatalk
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
CHINEZU097 said:
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
Click to expand...
Click to collapse
Oh, that's PIE and you can use that too if you want to.
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
The boot.img in the Paranoid Android zip is fine. Extract that and flash it using fastboot/FlashTool. You'll now have a recovery with which you can install the Paranoid Android system. Access the recovery by powering on the device, then holding Volume Up as soon as the LED turns green.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
As above for thr boot.img
Carbon has PIE as well, but build 18 seems a little unstable
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
CHINEZU097 said:
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
Click to expand...
Click to collapse
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Problem with my phone also.....
Sent from my GT-S7392 using XDA Free mobile app
Tnx
blueether said:
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Click to expand...
Click to collapse
after flash gapps did i need to rewipe data and both caches?
CHINEZU097 said:
after flash gapps did i need to rewipe data and both caches?
Click to expand...
Click to collapse
I don't normally.
blueether said:
I don't normally.
Click to expand...
Click to collapse
HHHEEEELLLLPPPPP!!!!!!
i flashed the 757 ftf(all was ok)
i started the phone(all was ok)
i flashed the boot.img(all was ok)
i powered on the pfone, i entered in cwm(vol+)(all was ok)
i restarted the phone and i tried to enter in trwm(vol-)(all was bad) it dont entered.
i hard reseted(pred red button
i powered it on and it stay freeze at sony logo.
help mee!!!
if i reflash ftf file it will realive?
i have another file.img with dual recovey(file witch i used to root it). is it goot for what i need now?
i just test the phone in fastmode and flashmode and its ok, my flashtool see my device.
help somebody!!!
i am so scaried!!!
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
CHINEZU097 said:
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
Click to expand...
Click to collapse
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
blueether said:
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
Click to expand...
Click to collapse
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
CHINEZU097 said:
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
Click to expand...
Click to collapse
the kernel was fine, it will boot any of the 4 variants
blueether said:
the kernel was fine, it will boot any of the 4 variants
Click to expand...
Click to collapse
Tnx, but i used jackyees kernel.
My actualy problem is with the sim. I cant acces the contacts( when i try to import from sim it dont fint them.) i checked my sim and its ok.
Alright, plenty of you folks might already be enjoying Cloudy/Stock ROM but there are guys out there, like me, who would sacrifice a very few LG core apps for the outstanding AOSP ROM i.e Resurrection Remix.
So here in this guide I'll show you all the steps that i followed to Flash Resurrection Remix over CloudyG2 3.3 (Obviously this guide will work for Stock Rooted ROM too with TWRP ofcourse!)
Have a look at the Pros and Cons BEFORE proceeding with the procedure!
Pros:
1. It's AOSP ROM dude!
2.Excellent Battery timing.
3.Super Smooth with ZERO LAG!
4.You get continuous updates.
5.Tremendous customization's via RR Rom.
Cons:
1. Camera not as cool as Stock.
2. NO fully supported Quick-Remote
3. No Quick Note or any other Stock app you liked.
Should I proceed or Stick with Cloudy/Stock?
Well, to be honest, its worth the hassle. The only thing i really miss was the Stock G3 camera that came with CoudyG2 but i guess CameraNext ain't so bad too. Moreover u get a hell lot of improvements with UI and other AOSP gimmicks.
NOTE:
I TAKE NO CREDIT IN THE DEVELOPING OF ANY APP/ROM SHARED!
Please Follow each step carefully, I'm not responsible if you mess up your device, no one is forcing you to do so, proceed at your own risk[ Nah, don't worry, i tried all this personally and nothing went wrong. Just be careful though!]
*****************************************Instructions************************************************
I'm assuming you already have a Rooted device with Custom Recovery installed.
What you need! [Links at the END]
1. RR Roms
2. KK Baseband
2. Gapps Package (for 5.1)
3. LP Bootstack
4. Quick-Remote
5. Partition Back&Resore
6. Donation to all the Devs who made this possible [If you can afford one ]
BACKUP:
Its always good to create a Backup of a very few System partitions and if something goes wrong, you'll thank me later for this!
1.Install Partition Backup&Restore
2.Backup The following Partitions [Your own Bootstack].
aboot, boot, dbi, laf, rpm, tz, sbl1, persist
3.Backup Modem.
Modem, Modemst1, Modemst2.
4.You can backup your apps too via Titanium Backup.
5.Copy All your Saved Partitions to your PC.
Getting Ready:
1.Copy ROM, KK baseband, LP Bootstack, Quickremote and Gapps Package to your phone.
2.Boot into Recovery.
3.Backup System, EFS and boot.
4.Wipe cache, dalvik cache, data and System.
Now, follow these steps in the following order.
1.Flash LP Bootstack.
2.Flash KK Baseband.
3.Flash ROM.
4.Flash Gapps.
Now, clear dalvik cache and cache .
Reboot your device.
Finally, if all went fine you'll be seeing RR booting.
Setting up Quick-Remote:
1. Goto Setting -> Configurations -> Miscellaneous -> Set SeLinux to Permissive (Make sure you give root permission to Setting via SuperSU).
2. Download Int.D Enabler via Playstore and Enable Int.D via this app.
3. Download BusyBox and install it. (Do not forget to install Busybox files within the app).
4. Reboot to Recovery and Flash Quickremote.zip.
5. Clear Cache and dalvik cache.
6. Reboot
Other [Must] addons:
Beside the awesomeness already provided by RR, let's crank it up a little bit
Boost Sound(Yup, you gotta do it!):
1. Download mixerpath.zip and extract it.
2. Goto System -> etc -> rename mixerpath.xml to mixerpath.bak (creating a backup just in case).
3. Now copy the extracted mixerpath.xml to System -> etc.
4. Download Viper4Android.
5. Install apk and run it (choose the "ViPER4Android_FX_A4.x.apk" file).
6. It'll ask for which driver to install, Choose High Quality.
7. Reboot.
Improve Camera:
1. Download CameraNext.
2. Reboot to recovery and flash it.
3. Wipe cache and dalvik cache.
Other thoughts:
LTE should be working as it's available in the Setting.
Goto Setting and apply the PitchBlack theme (if you like).
There you go, now i guess you won't regret your decision of choosing AOSP ROM for your G2.
Hit Thanks as i won't ask you for a drink or hoe
LINKS:
ROM+Gapps
KK Baseband
LP BootStack (Click on 'View Full file' to Download)
Viper4Android
awesome guides, works great.
I really want to update to update to marshmallow but have no idea which bootstack to use. I've never needed to change bootstack when updating other phones.
Update TWRP before installing ROM
Thanks for the guide. I had an issue after installing this ROM on D802T, whereby I could not longer boot into TWRP recovery and received a "secure boot error" followed by a blank screen. Before installing RR, I had to update TWRP to blastagator's TWRP w/ Thermal Control & F2FS (twrp-3.0.2-1-d802-bump-blastagator-signed.zip).
MonsieurLorax said:
Thanks for the guide. I had an issue after installing this ROM on D802T, whereby I could not longer boot into TWRP recovery and received a "secure boot error" followed by a blank screen. Before installing RR, I had to update TWRP to blastagator's TWRP w/ Thermal Control & F2FS (twrp-3.0.2-1-d802-bump-blastagator-signed.zip).
Click to expand...
Click to collapse
You actually messed up the recovery partition. You had to flash the D802T recovery NOT D802. If your phone is booting then do so else restore to Stock and reproduce the steps. Good luck!
Sent from my LG-D855 using XDA-Developers mobile app
Kind attention!!
Currently I am on cloudy g2 3.3 and i have a full backup of cm13 rom,which I was using earlier.My question is, can i simly restore that backup through twrp or not?
akki809 said:
Kind attention!!
Currently I am on cloudy g2 3.3 and i have a full backup of cm13 rom,which I was using earlier.My question is, can i simly restore that backup through twrp or not?
Click to expand...
Click to collapse
Cm13 uses LP bootstack so i think there won't be any issue but I'm not sure about the modem though, do backup everything before you proceed.
Sent from my LG-D855 using XDA-Developers mobile app
This is a new Deodexed Rooted Rom . Made from the latest firware files J727PVPU3AQJ3 it is Deodexed an Rooted using ASSAYYEDs kitchen with xposed framework an apk already installed an RootExplorer everything working even auto correct in text messaging
THREAD CLOSED
To install use twrp 3.1.1_0 for now !
1. Factory reset wipe casha an divilk casha .
2. install Rom zip .
3. wipe casha an divilk casha.
4. Reboot.
once booted an setup go into xposed app an update framework Done enjoy !!
My Thanks to everyone that maded this possible !!
This is for people that don't want xposed go into xposed installer uninstall framework then go into Root explorer go into system apps click r /w an just delete xposed app an reboot ! All
This Build does not have xposed preinstalled !!
New Build Today Decemder 7 2017 new install.
Update to Twrp 3.2.0.0
1.factoery reset
2. wipe system
3. install Rom
4. wipe casha an Dalvilk casha
5. ReBoot an enjoy !
Note these builds take up to 5 minutes to boot an do stop on boot logo an reboot an then boot after 5 minutes !
I guess no one had much to say about this build that's ok no news is good news !
Final update on this firmware
added more tweaks eabled ADB in system an kernel !
added xposed framework an app back in like the origanel !
install with the twrp of your choice I'm still using twrp 3.1.1-0
wipe factory reset an wipe system
flash zip
wipe cashe an Dalvilk cashe
reboot
If it stops any where in setup pull Battery an reboot should be fine !
After setup go into xposed app update framework an enjoy !
For people that don't want xposed go into xposed app an uninstall framework then go into Root explorer an delete xposed apk system/app xposed apk !
Foot note if you don't use ADB first build is Best ! At the top of my thread
is it rooted alrdy ?
virgin mobole Galaxy J727P
parthaxda007 said:
is it rooted alrdy ?
Click to expand...
Click to collapse
Yes this Rom is already Rooted an has the xposed framework already installed
virgin mobole Galaxy J727P
parthaxda007 said:
is it rooted alrdy ?
Click to expand...
Click to collapse
New Build Today is Rooted but no xposed !!
Thank you very very much!!!! SO happy to see development on this device finally
Virgin mobile Galaxy j727P
XxTeXx07xX said:
Thank you very very much!!!! SO happy to see development on this device finally
Click to expand...
Click to collapse
Does anyone know of a good program for making a custom kernel ?
Does this work for boost Mobile also?
virgin mobile Galaxy J727P
thislight87 said:
Does this work for boost Mobile also?
Click to expand...
Click to collapse
It should work just fine !!
Also where can I get twrp for this? Thank you
thislight87 said:
Also where can I get twrp for this? Thank you
Click to expand...
Click to collapse
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
TeknoGodz said:
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
Click to expand...
Click to collapse
sorry its been awhile since ive messed with putting anything custom on this phone, the last time was in october and the twrp i had was all screwed up and i spend a day and a half fixing my stuff, i found it though thanks.
Question though, i want to do a backup.... the options for that are.....
system
system image
data (excl. storage)
cache
boot
recovery
frp
persist
EFS
system data and boot are automatically selected, is there others i should select? i know this probably isnt the right place for this but i know theres someone on here who's gotta know, thank you very much
Virgin mobile Galaxy j727P
thislight87 said:
sorry its been awhile since ive messed with putting anything custom on this phone, the last time was in october and the twrp i had was all screwed up and i spend a day and a half fixing my stuff, i found it though thanks.
Question though, i want to do a backup.... the options for that are.....
system
system image
data (excl. storage)
cache
boot
recovery
frp
persist
EFS
system data and boot are automatically selected, is there others i should select? i know this probably isnt the right place for this but i know theres someone on here who's gotta know, thank you very much
Click to expand...
Click to collapse
You can check them all but don't check system image !!
TeknoGodz said:
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
Click to expand...
Click to collapse
Does anyone had anything to say about this build ?
Thanks. I'm going to try this right now. Preferably, I'd like to get Magisk working (and then do Xposed systemless through that) @Peter, can I do this?
Virgin mobile Galaxy j727P
skuppej said:
Thanks. I'm going to try this right now. Preferably, I'd like to get Magisk working (and then do Xposed systemless through that) @Peter, can I do this?
Click to expand...
Click to collapse
Thank you
ROM is good but I was unable to get Magisk to work.
I wiped and restored to stock QI3 and tried to flash it but it says my boot image has been modified.
OK did it. For anyone that wants to know:
1. Take a backup of ROM in TWRP.
2. Download stock image (in my case latest version QJ3 works) & unSU.zip & magisk zip
3. Boot into recovery
4. Flash unSU.zip
5. Wipe system, data & caches
6. Boot immediately into Download Mode and restore to stock using Odin and then reboot back to Download Mode and flash TWRP
7. Boot up once and go through setup & then reboot back into recovery
8. Wipe system, data & caches again
9. Restore backup BUT DE-SELECT BOOT.IMG
10. Flash unSU.zip one more time
11. Boot back into rom and make sure that it's not rooted and phone/data works
12. Flash Magisk zip in recovery
Thanks again for the ROM
Thank you very much. The rom works just fine
Can anyone give me the root for the Samsung galaxy j7 per? I would like to root my new phone.
Virgin mobile Galaxy j727P
gettchagottcha said:
Can anyone give me the root for the Samsung galaxy j7 per? I would like to root my new phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-j7/development/root-sm-j727p-galaxy-j7-perx-td-lte-t3611202
This is a security patch Feb/01/2020 has note 10 wallpaper camera has been completley redone has a whole bunch of tweaks and mods done to it based of bootloader u7 XXU
Big thanks to @Gollo99 for all his hard work on camera
Enjoy more too come as we work on it
But here's a preview
https://drive.google.com/file/d/1piQr7j-jLXEGmYgoxlnp6ot3PRM9hcRj/view?usp=drivesdk
@hooooossamq here you go test away
I'll try it out
Does it work in binary 3 or is it mandatory to upgrade to binary 4?
It should work on u3
I will try it these days and inform if it works
what different this rom with stock? can you list out?
Didn't work for me(U2)
Edit
Forgot to flash my boot.img
Great work @shumway66.
This Rom is ruining very smoothly.
This is how I installed it.
1. Start with existing OneUI.
2. Reboot into TWRP
3. Backup boot, data, system
4. Install this ROM (don't wipe anything)
5. Wipe both caches
6. Restore boot only from the backup from step 3
7. Reboot.
Brilliant result. Thanks
I will let you know more as I go on.
michael13Alv said:
Does it work in binary 3 or is it mandatory to upgrade to binary 4?
Click to expand...
Click to collapse
You might need to flash your patched boot.img after you flash the rom zip
Seems to be working well.
I flashed it over my existing data and then restored my boot sector.
View attachment 4964703
Smart capture is working.
I deleted a few more apps.
View attachment 4964727
physwizz said:
Seems to be working well.
I flashed it over my existing data and then restored my boot sector.
View attachment 4964703
Smart capture is working.
Click to expand...
Click to collapse
yeah still a work in progress lol
excellent
excellent job brother
New camera looks good
L
@shumway66
Will this work with OneUI 2.0?
Solved
[Flash the zip and then my boot.img started and everything but at the time of restarting it appeared to me that only official binaries can be flashed
Returning to stock waiting for a solution for this problem
B3 Patch 1 octuber
]
michael13Alv said:
Flash the zip and then my boot.img started and everything but at the time of restarting it appeared to me that only official binaries can be flashed
Returning to stock waiting for a solution for this problem
B3 Patch 1 octuber
Click to expand...
Click to collapse
This is how I installed it.
1. Start with existing OneUI.
2. Reboot into TWRP
3. Backup boot, data, system
4. Install this ROM (don't wipe anything)
5. Wipe both caches
6. Restore boot only from the backup from step 3
7. Reboot.
Use that method
michael13Alv said:
Use that method
Click to expand...
Click to collapse
That method worked for me.
I'm on U2 June 2019
My patch is October 1/2 I don't remember what it is exactly but it is one of those and my binary is 3