This is a new Deodexed Rooted Rom . Made from the latest firware files J727PVPU3AQJ3 it is Deodexed an Rooted using ASSAYYEDs kitchen with xposed framework an apk already installed an RootExplorer everything working even auto correct in text messaging
THREAD CLOSED
To install use twrp 3.1.1_0 for now !
1. Factory reset wipe casha an divilk casha .
2. install Rom zip .
3. wipe casha an divilk casha.
4. Reboot.
once booted an setup go into xposed app an update framework Done enjoy !!
My Thanks to everyone that maded this possible !!
This is for people that don't want xposed go into xposed installer uninstall framework then go into Root explorer go into system apps click r /w an just delete xposed app an reboot ! All
This Build does not have xposed preinstalled !!
New Build Today Decemder 7 2017 new install.
Update to Twrp 3.2.0.0
1.factoery reset
2. wipe system
3. install Rom
4. wipe casha an Dalvilk casha
5. ReBoot an enjoy !
Note these builds take up to 5 minutes to boot an do stop on boot logo an reboot an then boot after 5 minutes !
I guess no one had much to say about this build that's ok no news is good news !
Final update on this firmware
added more tweaks eabled ADB in system an kernel !
added xposed framework an app back in like the origanel !
install with the twrp of your choice I'm still using twrp 3.1.1-0
wipe factory reset an wipe system
flash zip
wipe cashe an Dalvilk cashe
reboot
If it stops any where in setup pull Battery an reboot should be fine !
After setup go into xposed app update framework an enjoy !
For people that don't want xposed go into xposed app an uninstall framework then go into Root explorer an delete xposed apk system/app xposed apk !
Foot note if you don't use ADB first build is Best ! At the top of my thread
is it rooted alrdy ?
virgin mobole Galaxy J727P
parthaxda007 said:
is it rooted alrdy ?
Click to expand...
Click to collapse
Yes this Rom is already Rooted an has the xposed framework already installed
virgin mobole Galaxy J727P
parthaxda007 said:
is it rooted alrdy ?
Click to expand...
Click to collapse
New Build Today is Rooted but no xposed !!
Thank you very very much!!!! SO happy to see development on this device finally
Virgin mobile Galaxy j727P
XxTeXx07xX said:
Thank you very very much!!!! SO happy to see development on this device finally
Click to expand...
Click to collapse
Does anyone know of a good program for making a custom kernel ?
Does this work for boost Mobile also?
virgin mobile Galaxy J727P
thislight87 said:
Does this work for boost Mobile also?
Click to expand...
Click to collapse
It should work just fine !!
Also where can I get twrp for this? Thank you
thislight87 said:
Also where can I get twrp for this? Thank you
Click to expand...
Click to collapse
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
TeknoGodz said:
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
Click to expand...
Click to collapse
sorry its been awhile since ive messed with putting anything custom on this phone, the last time was in october and the twrp i had was all screwed up and i spend a day and a half fixing my stuff, i found it though thanks.
Question though, i want to do a backup.... the options for that are.....
system
system image
data (excl. storage)
cache
boot
recovery
frp
persist
EFS
system data and boot are automatically selected, is there others i should select? i know this probably isnt the right place for this but i know theres someone on here who's gotta know, thank you very much
Virgin mobile Galaxy j727P
thislight87 said:
sorry its been awhile since ive messed with putting anything custom on this phone, the last time was in october and the twrp i had was all screwed up and i spend a day and a half fixing my stuff, i found it though thanks.
Question though, i want to do a backup.... the options for that are.....
system
system image
data (excl. storage)
cache
boot
recovery
frp
persist
EFS
system data and boot are automatically selected, is there others i should select? i know this probably isnt the right place for this but i know theres someone on here who's gotta know, thank you very much
Click to expand...
Click to collapse
You can check them all but don't check system image !!
TeknoGodz said:
come on man do a search you're literally in the forum a couple pages up from it. search j727p twrp
Click to expand...
Click to collapse
Does anyone had anything to say about this build ?
Thanks. I'm going to try this right now. Preferably, I'd like to get Magisk working (and then do Xposed systemless through that) @Peter, can I do this?
Virgin mobile Galaxy j727P
skuppej said:
Thanks. I'm going to try this right now. Preferably, I'd like to get Magisk working (and then do Xposed systemless through that) @Peter, can I do this?
Click to expand...
Click to collapse
Thank you
ROM is good but I was unable to get Magisk to work.
I wiped and restored to stock QI3 and tried to flash it but it says my boot image has been modified.
OK did it. For anyone that wants to know:
1. Take a backup of ROM in TWRP.
2. Download stock image (in my case latest version QJ3 works) & unSU.zip & magisk zip
3. Boot into recovery
4. Flash unSU.zip
5. Wipe system, data & caches
6. Boot immediately into Download Mode and restore to stock using Odin and then reboot back to Download Mode and flash TWRP
7. Boot up once and go through setup & then reboot back into recovery
8. Wipe system, data & caches again
9. Restore backup BUT DE-SELECT BOOT.IMG
10. Flash unSU.zip one more time
11. Boot back into rom and make sure that it's not rooted and phone/data works
12. Flash Magisk zip in recovery
Thanks again for the ROM
Thank you very much. The rom works just fine
Can anyone give me the root for the Samsung galaxy j7 per? I would like to root my new phone.
Virgin mobile Galaxy j727P
gettchagottcha said:
Can anyone give me the root for the Samsung galaxy j7 per? I would like to root my new phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-j7/development/root-sm-j727p-galaxy-j7-perx-td-lte-t3611202
Related
Hi,
This is the way to use Xposed on lollipop 5.0.2 (14.5.A.0.242) without bootloop on Odexed Rom.
No need to wipe cache and dalvik on every boot.
Tested On 6802 with locked Bootloader.
instruction:
1- flash PRF 14.5.A.0.242 with dualrecovery & First boot.
2- reboot in recovery and Wipe Cache and davilk,
3- flash this files from this topic.
4- Reboot into system, Install the .apk of Xposed for Lollipop
5- Reboot again in recovery and just flash the .zip of Xposed.
And now, no bootloop after each reboot
Thanks to @xander59
Source
I can vouch this method works very well but I needed a lot of stuff that was deleted. So after you flash the firmware, dont boot but use a recovery file manager. Manually delete folders of most apps listed in the same thread as OP posted. and make sure you reboot after every install of an app and xposed module for first 10-20 times. In this way, you will know what you just installed that gave you boot loop and you can just delete the file through recovery instead of restoring nadroid backup. I have nandroid backup ready just in case and sometimes just installing two apps from play store gave me a bootloop and when i installed the same apps after a reboot of each other, they worked fine. Anyone wondering the apps were maps and gmail.
Yes, now with the discover of @ondrejvaroscak here, it's probably more safe to delete the apps that you don't use instead of remove all the apps of the script
xander59 said:
Yes, now with the discover of @ondrejvaroscak here, it's probably more safe to delete the apps that you don't use instead of remove all the apps of the script
Click to expand...
Click to collapse
I think that generally safe is also using the debloaters or debloated ROM that guys made, because these are thoroughly tested. Its more matter of preference. I made my research just because I was curious about what is behind bootloops..
Unknown_2517 said:
Hi,
This is the way to use Xposed on lollipop 5.0.2 (14.5.A.0.242) without bootloop on Odexed Rom.
No need to wipe cache and dalvik on every boot.
Tested On 6802 with locked Bootloader.
instruction:
1- flash PRF 14.5.A.0.242 with dualrecovery & First boot.
2- reboot in recovery and Wipe Cache and davilk,
3- flash this files from this topic.
4- Reboot into system, Install the .apk of Xposed for Lollipop
5- Reboot again in recovery and just flash the .zip of Xposed.
And now, no bootloop after each reboot
Thanks to @xander59
Source
Click to expand...
Click to collapse
Worked perfectly on z ultra on stock customized DE lollipop and I was one of the ones with the bootloop issues
Thanx
Link dead !
Can you update it please ?
Which version do we use for z ultra?
WildBit said:
Worked perfectly on z ultra on stock customized DE lollipop and I was one of the ones with the bootloop issues
Thanx
Click to expand...
Click to collapse
Which version did you use? Thanks
Hello
Im bored by using android 4.2 from many years, i want something new in my device
im tired of finding how to install cyanogen in lenovo A680
i dont know from where i can get working stock ROM of Lenovo A680
and i dont know how can i port rom perfectly
i hope you can help me !
Hi
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
maxnuk said:
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
Click to expand...
Click to collapse
Thanks for those step by step answer.!
sure i will follow your step when i will install ROM
oh well, can you tell me from where i can get Cyanogen for Lenovo A680 ?
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
maxnuk said:
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
Click to expand...
Click to collapse
Thanks for your help
but according to comments, it seems fake rom ,full of bugs! better I Should not try
hey can you tell me how can I port rom and make it compatible with my device?
I'm interested into cyanogen ,I already downloaded both cyanogen 12.1 and 13
I want to make it compatible with my device
I'll be thankful to you
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Ideally you get a ready-rom, like the settings of your device and change.
maxnuk said:
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Click to expand...
Click to collapse
I'm Sorry if I bother you
wow your answer is Really so awesome
im going to read all the contents!
Thanks Really!
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
maxnuk said:
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
Click to expand...
Click to collapse
you are the boss!
Really your answer is interesting
soon I'll be downloading it
but I afraid little bit, Because just 2 day ago I tried to flash custom rom and it stuck at booting logo
I was unable to boot into recovery too
then I give it to service center, and then my device working today
XD You need not have gone ... Boot loop, that always happens..
maxnuk said:
XD You need not have gone ... Boot loop, that always happens..
Click to expand...
Click to collapse
Haha Thanks dude...hey do you know how can I flash custom rom in computer? using emulators?
so that I can test whether rom is working Fine or not, so that I can avoid risk on my device
Do you have skype ?
maxnuk said:
Do you have skype ?
Click to expand...
Click to collapse
yes I've
Do you use Smart Phone Flash tool ?
maxnuk said:
Do you use Smart Phone Flash tool ?
Click to expand...
Click to collapse
I know how to use it, but I didn't used,Because last time I tried to flash rom using TWRP
you know What was Good wrong?
I did wipe cache and data, after that, I tried to install custom rom zip, and I found it's corrupted!
so, I ended up with bricking my device
that's why I want to flash rom in computer first!! Haha
when you bricked your phone, you could not get into TWRP ?
maxnuk said:
when you bricked your phone, you could not get into TWRP ?
Click to expand...
Click to collapse
yes right!! and even I was unable to get into recovery mode using key combination
just use that Smart Phone Flash tool..
maxnuk said:
just use that Smart Phone Flash tool..
Click to expand...
Click to collapse
Oh Thanks for that.. sure I'll use it next time...but still I afraid of bricking! do you have any idea how can I flash custom rom in computer emulator? so I can make sure rom is working Fine or not
I do not know. I recommend you not flash rom.
Flash this recovery on the community build: http://forum.xda-developers.com/devdb/project/dl/?id=20236
And then flash the super SU file via recovery:
https://www.androidfilehost.com/?fid=24591000424944601
Let me know if this works or you need any help ?
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
From other posts in other topics it seams that it's the only twrp version that installs OOS 3.1.1
Sent from my ONE E1001
trendchanger said:
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
yes this is working
Jab_ said:
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
Click to expand...
Click to collapse
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Exodusche said:
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Click to expand...
Click to collapse
Maybe the problem is not xposed itself, maybe the issue is related to an specific module. I'll try one by one tomorrow and see what happens, thank you!
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Exodusche said:
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Click to expand...
Click to collapse
I know what the problem was. My xposed zip was correct. As I thought, it was because of a module. "Android N-fy", in recents, I just had to uncheck quick switch and change no recent image and that was it. I don't know if that module is optimized for this oos especific build, because in settings of the phone, the module does not change as much as in lollipop oos. Thank you tho
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Worked fine. Thanks OP.
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
TarushS said:
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
Click to expand...
Click to collapse
Oh lol, glad this helped
StraightEdgeKid said:
Worked fine. Thanks OP.
Click to expand...
Click to collapse
Np?
Sachin7843 said:
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Click to expand...
Click to collapse
What exactly are you looking to do?
marwan2704 said:
What exactly are you looking to do?
Click to expand...
Click to collapse
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Sachin7843 said:
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Click to expand...
Click to collapse
Make sure you have both .zip files on your phone, clean flash 3.1.1 then boot it up. If you don't like it, you can go back to 2.2.2 via stock recovery anytime. You don't even need twrp unless you want to root, install Xposed or backup.
might be a bit off-topic but...
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
error23 said:
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
Click to expand...
Click to collapse
Sounds like you forgot to wipe data. Wipe system, data, cache and just flash 3.1.1. As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Exodusche said:
As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Click to expand...
Click to collapse
It's not the place, but I can confirm that it didn't work for me. I still have the drain from time to time.
And if I don't have the Wifi drain I have a service Google Play service drain (33% for today's charge for example...).
And sometimes, I even had the wifi drain with Wifi completly switched off...
Ok , Im running CM 13 i9300 and it worked so well except the camera. I always got the error "Can't connect to camera" . So I was trying to fix that problem and I found couple of solution . The solution need an app that requires SuperSU permission . And It was kinda weird because there's no "permission asking" popup from SuperSU. So I open SuperSU and it told me to update SuperSU binary file. So I tried to update it and it failed. So I tried to update it manually but I found other thing which is to flash the latest version of SuperSU direct from chainfire website. I deleted the old SuperSU (The one that needs to be updated) and I flashed the new SuperSU zip and wipe dalvik cache through my TWRP Recovery and then I reboot my phone . And got stuck at the Cyanogenmod Logo . So what should I do to get my phone back to normal ? I mean back to CM13 and everything I have before. PLS HELP
Note : actually , after I flashed CM 13 . I dont have the SuperSU in my apps . So I manually downloaded it from the playstore . It's weird because it should automatically be there .
Isn't root access found under developer settings?
audit13 said:
Isn't root access found under developer settings?
Click to expand...
Click to collapse
I seriously dunno about the root access at the developer settings . Now my phone is soft bricked and I'm gonna lose all of my data. Any clue on how to reflash the CM13 without deleting my stuff?(factory reset)
p/s : Yes , It's in the Developer settings
Boot into TWRP and reflash the same version of CM that was on the phone before it soft-bricked.
audit13 said:
Boot into TWRP and reflash the same version of CM that was on the phone before it soft-bricked.
Click to expand...
Click to collapse
Should I clear data , wipe cache and dalvik , factory reset all that or just go to TWRP and just flash
You could just flash over the existing ROM without wiping. If it doesn't boot, wipe cache. If it still doesn't boot, wipe data and cache.
audit13 said:
You could just flash over the existing ROM without wiping. If it doesn't boot, wipe cache. If it still doesn't boot, wipe data and cache.
Click to expand...
Click to collapse
Ok sir , new problem .. So I uses CM13 Nightlies , And I dont remember which version. Can I use latest version of CM13 Nightlies?
Yes, try the latest nightly.
audit13 said:
Yes, try the latest nightly.
Click to expand...
Click to collapse
Man It worked , seriously thank you man :good: :good: :good:
Glad to hear you solved the problem. We're all here to help and learn from each other.
This is a security patch Feb/01/2020 has note 10 wallpaper camera has been completley redone has a whole bunch of tweaks and mods done to it based of bootloader u7 XXU
Big thanks to @Gollo99 for all his hard work on camera
Enjoy more too come as we work on it
But here's a preview
https://drive.google.com/file/d/1piQr7j-jLXEGmYgoxlnp6ot3PRM9hcRj/view?usp=drivesdk
@hooooossamq here you go test away
I'll try it out
Does it work in binary 3 or is it mandatory to upgrade to binary 4?
It should work on u3
I will try it these days and inform if it works
what different this rom with stock? can you list out?
Didn't work for me(U2)
Edit
Forgot to flash my boot.img
Great work @shumway66.
This Rom is ruining very smoothly.
This is how I installed it.
1. Start with existing OneUI.
2. Reboot into TWRP
3. Backup boot, data, system
4. Install this ROM (don't wipe anything)
5. Wipe both caches
6. Restore boot only from the backup from step 3
7. Reboot.
Brilliant result. Thanks
I will let you know more as I go on.
michael13Alv said:
Does it work in binary 3 or is it mandatory to upgrade to binary 4?
Click to expand...
Click to collapse
You might need to flash your patched boot.img after you flash the rom zip
Seems to be working well.
I flashed it over my existing data and then restored my boot sector.
View attachment 4964703
Smart capture is working.
I deleted a few more apps.
View attachment 4964727
physwizz said:
Seems to be working well.
I flashed it over my existing data and then restored my boot sector.
View attachment 4964703
Smart capture is working.
Click to expand...
Click to collapse
yeah still a work in progress lol
excellent
excellent job brother
New camera looks good
L
@shumway66
Will this work with OneUI 2.0?
Solved
[Flash the zip and then my boot.img started and everything but at the time of restarting it appeared to me that only official binaries can be flashed
Returning to stock waiting for a solution for this problem
B3 Patch 1 octuber
]
michael13Alv said:
Flash the zip and then my boot.img started and everything but at the time of restarting it appeared to me that only official binaries can be flashed
Returning to stock waiting for a solution for this problem
B3 Patch 1 octuber
Click to expand...
Click to collapse
This is how I installed it.
1. Start with existing OneUI.
2. Reboot into TWRP
3. Backup boot, data, system
4. Install this ROM (don't wipe anything)
5. Wipe both caches
6. Restore boot only from the backup from step 3
7. Reboot.
Use that method
michael13Alv said:
Use that method
Click to expand...
Click to collapse
That method worked for me.
I'm on U2 June 2019
My patch is October 1/2 I don't remember what it is exactly but it is one of those and my binary is 3