I was install CWM 6.0.5.1 on my D618 v10c. I can enter Recovery mode by Rashr app.
But i don't know how to inter Recovery mode by hard buttons. Who can help me ? Can you detail guide ?
I was try:
- Power off
- Double press Power + Volume(-)/ (or Double press Power + Volume(+) )
But it does not enter Reovery mode.
Related
i can enter the recovery and the system but i cant enter dowlnoad mode
i wiped data using cwm i dont know if that affects and does that or not ?
Please Help Me
Press Vol up + Vol down + Power key. U will enter in download mode.
Hit Thanks if i Help,
Via ace s5830i.
If you have a blacklight on Download Mode, press UP and connect on your PC.
The Download mode is an blacklight, but active.
Sorry for my bad English
I flashed cwm recovery. At first, It was OK. But After I backed up to external sdcard, my device loops in recovery mode.
Pressing Vol Down + Home+ Power >> it goes to CWM Recovery Mode.
Pressing Power Buttion >> It goes to CWM Recovery Mode
Pressing Vol Up + Home + Power >> it goes to CWM Reocvery Mode.
I already used Jig , it was still in Recovery Mode.
No odin mode, I cant do anything.
In Recovery Mode, I can use Adb shell, su commands. So I replace recovery partition with stock recovery. Nothing change. Still in recovery mode.
Someone help me please.
hii......
Yoe Yoe Lay said:
I flashed cwm recovery. At first, It was OK. But After I backed up to external sdcard, my device loops in recovery mode.
Pressing Vol Down + Home+ Power >> it goes to CWM Recovery Mode.
Pressing Power Buttion >> It goes to CWM Recovery Mode
Pressing Vol Up + Home + Power >> it goes to CWM Reocvery Mode.
I already used Jig , it was still in Recovery Mode.
No odin mode, I cant do anything.
In Recovery Mode, I can use Adb shell, su commands. So I replace recovery partition with stock recovery. Nothing change. Still in recovery mode.
Someone help me please.
Click to expand...
Click to collapse
Download stockrecovery from http://forum.xda-developers.com/showthread.php?t=2716953 and save it in your sd card. Nw install it using cwm.... hope it helps
Hi all.
I entered recovery mode (through the advanced reboot menu in CM, but that doesn't matter).
My power button doesn't work, and everything was fine without it until I entered recovery mode - now I can't exit it.
The problem is I can't select "reboot system now" from the recovery menu because power button is the selector (and as I said, it doesn't work) so I tried taking the battery out and then turning on but it enters recovery mode every time.
I didn't do anything through recovery mode so no harm was done to my working system.
Also, my PC doesn't recognize my phone when in recovery mode so I can't run adb commands. I don't know why - I have the latest usb drivers installed.
Is there any way to exit recovery mode without the power button?
Thanks a lot. :good:
Use touch CWM or Philz touch or TWRP
Ended up with fixing my power button.
Thanks any way.
By the way, discovered rainbow mode (volume down + up together) of CWM... pretty funny.
How to enter to recovery mode in Eurostar epad genie tablet. i tried to enter to recovery mode using the key combination power button and volume + button. When i press those button it shows FASTBOOT mode and I cannot enter into recovery mode. Please help me
my device is Celkon q42
mt6582
4inch
512 MB ram,4gb rom
I have ported twrp and philz touch recovery rooted too.
I can boot into recovery by mobile uncle or any Rebooter app .
but my problem is I can't boot into recovery by hardware keys .
vol- and power is factory mode
vol+ and power
it shows 3options
1 recoveryy
2 fastboot
3 normal (press vol+ to select and vol- is OK)
but I can't select anything by pressing vol- or any butbutton
plz help:crying:
sudhansu7 said:
my device is Celkon q42
mt6582
4inch
512 MB ram,4gb rom
I have ported twrp and philz touch recovery rooted too.
I can boot into recovery by mobile uncle or any Rebooter app .
but my problem is I can't boot into recovery by hardware keys .
vol- and power is factory mode
vol+ and power
it shows 3options
1 recoveryy
2 fastboot
3 normal (press vol+ to select and vol- is OK)
but I can't select anything by pressing vol- or any butbutton
plz help:crying:
Click to expand...
Click to collapse
Hello,
i have a huge problem with my Blackview Ultra Chinaphone (MTK 6582). I managed to make all necessary backups with MTK Droidtools and i manages to install a custom recovery (TWRP latest version) which wasn't easy because the recovery screen was flipped and the touch screen inverted but i have a flipped recovery with proper working touch now.
My problem is that i am unable to boot into recovery via the hardware buttons. When i press powerbutton+volume down button some chinese menu appers. When i press powerbutton+volume up button (which you press to get into recovery with most chinaphones) a menu appers where i get 3 options and it says "volume down-button is OK". When i navigate to the "recovery" option with the volume up-button and want to confirm it with the volume down-button nothing happens. the button works when fully booted so it can't be a hardware defect. i have to press powerbutton+volume up (the cursor starts to jump between options) until the phone boots normally. the recovery works, because when i boot into it (with rom manager for example) everything works fine. i want to try out a few roms so it is essential for me to be able to boot into recovery with the buttons in case i damage something while flashing.
i would be so glad if anyone could help me !
please excuse my english, it's not my native lenguage!
greetings
Argarash
*push*
this is very urgent and annyoing..i can't flash anything in case i make a mistake while porting..