Presenting the ArcticRa1n ROM(NEW AND IMPROVED), created by me (LaserCrafter) for the Motorola Droid RAZR xt912.
Based on LiquidSmooth by the LiquidSmooth team .
Code:
[B]DISCLAIMER: Google, XDA, the Android team, or me is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.[/B]
NOTE: THIS IS AN UNSIGNED ROM SO DISABLE ZIP SIGNATURE VERIFICATION. IT MAY OR MAY NOT HAVE FIRST-TIME LAG SO WHEN YOU DO HAVE FIRST-TIME LAG AFTER WHEN YOU FINISHED SETTING UP YER PHONE AND GETTING YER APPS BACK, REBOOT YER PHONE.
Code:
Features:
Droid Ultra Boot animation and sounds
Droid Turbo Circle Widget
New Launchers
VERY LITTLE OR MINOR build.prop tweaks (Just MINOR OK?!)
All Of LiquidSmooth's features
Zipaligned
DOWNLOADS:
CDMA: https://www.androidfilehost.com/?w=files&flid=28264
GApps: Since This is based off of LiquidSmooth , TKruzze and BaNks have closed down their pages for Gapps KitKat, so download from this link
LINK: https://www.androidfilehost.com/user/?w=settings-dev-files&flid=29905
Installation:
Make ROM-SLOT-1 W/ DEFAULT SETTINGS
Install ROM and GApps
(*If You have bad WiFi like me and takes long to connect follow this easy step
*Factory reset the ROM-Slot-1 four times) <- FOR PEOPLE WHO HAVE A WIFI PROBLEM
Reboot FOR EVERYONE!!!
Thanks:
LiquidSmooth Team - Based LS3.2
ikromy - droid turbo qhd circle widget
artur0558 - droid ultra system dump
IF YOU WISH TO INSTALL LIQUIDSMOOTH 4.0 OR CYANOGENMOD 12 UNOFFICIAL YOU HAVE TO GET SAFESTRAP 3.75 TEST BUILD BY STARGO OR ELSE THIS WILL MAKE YOUR DEVICE ROADKILL!!!
ANOTHER NOTE: YOU CAN STILL DOWNLOAD THIS ROM WHEN ON THE NEW VERSION OF SAFESTRAP
SOME MOAR NOTEZ: FOR ALL THOSE HTC VISION(G2/DESIRE Z) USERS: THIS ROM WILL BE PORTED BY ME FOR THE HTC VISION USERS ON EITHER AS A HTC SENSE ROM OR A AOSP BASED ROM. <- FOR THE HTC VISION USERS
Code:
Current changelog: 04-19-2015
Initial Release (Do I have to say anything more?)
MOAR NOTEZ THAT THIS THREAD WILL GET LONG: I WILL CONTINUE TO GIVE YOU UPDATES OF THIS ROM.
XDA:DevDB Information
ArcticRa1n 4.4.4, ROM for the Motorola Droid RAZR
Contributors
LaserCrafter
ROM OS Version: 4.4.x KitKat
Based On: LiquidSmooth
Version Information
Status: Testing
Created 2015-04-19
Last Updated 2016-12-01
Reserved
i don't have a xt910 so i can only try builds for the xt912!!
Reserved
please list any bugs, features you want me to add, or any problems with this rom
LaserCrafter said:
Presenting the ArcticRa1n ROM, created by me (LaserCrafter) for the Motorola Droid RAZR xt912.
Based on LiquidSmooth by the LiquidSmooth team .
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKED DEVICES, DEAD SDCARDS, THERMONUCLEAR WAR, RAGEQUITTING.
THIS IS ALL ON YOU IF YOU INSTALL THIS ROM. THIS ROM IS 75% STABLE AND I MYSELF TESTED THIS 100% SO NOTHING SHOULD GO WRONG.
MOAR NOTEZ: THIS IS AN UNSIGNED ROM SO DISABLE ZIP SIGNATURE VERIFICATION. IT MAY OR MAY NOT HAVE FIRST-TIME LAG SO WHEN YOU DO HAVE FIRST-TIME LAG AFTER WHEN YOU FINISHED SETTING UP YER PHONE AND GETTING YER APPS BACK, REBOOT YER PHONE.
Features:
Droid Ultra Boot animation and sounds
Droid Turbo Circle Widget
New Launchers
MINOR build.prop tweaks (Just MINOR OK?!)
All Of LiquidSmooth's features
Zipaligned
DOWNLOADS:
CDMA: https://www.androidfilehost.com/user/?w=settings-dev-files&flid=28264
GApps: Since This is based off of LiquidSmooth , TKruzze and BaNks have closed down their pages for Gapps, so download from this link
LINK: https://www.androidfilehost.com/user/?w=settings-dev-files&flid=29905
Installation:
Make ROM-SLOT-1 W/ DEFAULT SETTINGS
Install ROM and GApps
(*If You have bad WiFi like me and takes long to connect follow this easy step
*Factory reset the ROM-Slot-1 four times) <- FOR PEOPLE WHO HAVE A WIFI PROBLEM
Reboot FOR EVERYONE!!!
Thanks:
LiquidSmooth Team - Based LS3.2
ikromy - droid turbo qhd circle widget
artur0558 - droid ultra system dump
IF YOU WISH TO INSTALL LIQUIDSMOOTH 4.0 OR CYANOGENMOD 12 UNOFFICIAL YOU HAVE TO GET SAFESTRAP 3.75 TEST BUILD BY STARGO OR ELSE THIS WILL MAKE YOUR DEVICE ROADKILL!!!
ANOTHER NOTE: YOU CAN STILL DOWNLOAD THIS ROM WHEN ON THE NEW VERSION OF SAFESTRAP
XDA:DevDB Information
ArcticRa1n 4.4.4, ROM for the Motorola Droid RAZR
Contributors
LaserCrafter
ROM OS Version: 4.4.x KitKat
Based On: LiquidSmooth
Version Information
Status: Testing
Created 2015-04-19
Last Updated 2015-04-19
Click to expand...
Click to collapse
Hi, am unable to download rom from the link provide even after registering on it. It shows access denied. Pls provide the working links.....
About umts_spyder
Would U in plain maintance gsm version of droid razr(razr maxx)- umts spyder?
danube59sailor said:
Would U in plain maintance gsm version of droid razr(razr maxx)- umts spyder?
Click to expand...
Click to collapse
Sorry i don't have a gsm razr to test it
solidshree said:
Hi, am unable to download rom from the link provide even after registering on it. It shows access denied. Pls provide the working links.....
Click to expand...
Click to collapse
Changed the links. NAO you will be able to DOwnload it. Just find any bugs or features you want me to implement or fix in the future
This is rom is good except bluetooth doesn't work. I use this device as Music player so i need my bluetooth headphones to work. It says it's paired, but will not play out of headphones. Is this a liquid bug?
sTl2yk3l2 said:
This is rom is good except bluetooth doesn't work. I use this device as Music player so i need my bluetooth headphones to work. It says it's paired, but will not play out of headphones. Is this a liquid bug?
Click to expand...
Click to collapse
I probably think that it's a liquidsmooth bug. I already told them that exact bug that you had and they might work on it (i hope).
Related
I don't have 10 posts yet so I can't place this in the Android development forum yet, please bear with me if you would like to use this ROM
This unofficial CM10.1.2 works only on E970 devices updated to 4.1.2 OTA(or manually updated TZ/RPM partitions)
First things first: I am NOT a developer and this ROM is not fully ported yet, this is an announcement that as soon as I resolve the stuck Navigation Bar
since we have hardware keys I will post the ROM in the Android Development forum.
Code:
[SIZE="3"]#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/[/SIZE]
Consider this build alpha, it has issues, halo works though
File is being uploaded to Dev-Host nao.
Please be patient as I'm using free hotel WiFi, and it's awful
Download link at bottom of post.
This ROM is largely based on dvhexer's amazing CM 10.1 LGOG/N4 build and Morpheus90's CM 10.1.2 with HALO. All thanks should be directed towards
them as without actual devs for a starting point we wouldn't have this.
dvhexer's CM POST for LGOG
http://forum.xda-developers.com/showthread.php?t=2130639
Morpheus90's CM+HALO for Nexus4
http://forum.xda-developers.com/showthread.php?t=2346265
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 (Jelly Bean),
which is designed to increase performance and reliability over stock Android for your device.
I wanted a ROM as Stock as possible with Halo from Paranoid Android, so I started this project for my own and
decided to share results with you all.
What you get is the latest rock-solid Stable version of CyanogenMod (10.1.2) with no extra additions,
except for Halo from ParanoidAndroid.
Notes:
- Backup your EFS partitions before flashing any firmware: http://forum.xda-developers.com/show....php?t=2161611
- Gapps are not included.
I use official Gapps: http://tinyw.in/C7XP
- No modem is included in this ROM. JB ATT modem is fully functional now. Refer to this thread for modem links: http://forum.xda-developers.com/show....php?t=2270319
- The kernel included in the ROM is based on CM mako kernel + faux123 updates + dvhexers updates to support all E970 features.
- Ignore OTA CM updates when you receive notifications.
Click to expand...
Click to collapse
Installation instructions:
- boot into recovery.
- do a backup of your current rom/data !
- do 'wipe data/factory reset'
- install ROM zip
- install Gapps
- reboot
(original fix by dvhexer)
- If NFC does not work for you, flash this file in recovery: http://d-h.st/51v Flash it ONLY if NFC does not work for you!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Code:
Changelog - 20130720 (gimp)
+kernel with oc/uv/colors/io sched/fast charge/etc
OC Kernel on temporary hold O_o
(when build is posted in development forum)
Changelog - 20130714 (Morpheus90)
* CM 10.1.2
* New Halo
Changelog - 20130713 (dvhexer)
- working autofocus in camera(both picture and video modes)
* Autofocus in video mode is really the only thing I missed.
- AT&T is shown as AT&T by JB radio. No Maritime bs.
- "stock" kernel for now, that is no OC/UV/Custom colors etc.
- no N4 conversion support for now.
- bugs... You're welcome to report them
Code:
Bugs:
1. If you set the vibration around 50 (+/-5) it occasionally forces a hard
boot, please be advised of this and do not make this setting permanent on
reboot. You have been warned. Anything that uses vibration can trigger it.
it will drive you insane.
Stock setting of 70 for vibration is ok, can occasionally hang if you slam the
back button 10 times for some long recursive apps (file managers)
41 works for me.
2. Text/MMS app crashes on launch
3. External SD card not visible
4. Default APN is 3G, enable APN of choice in Settings>more>mobile networks
Screenshots are below, notice the soft keys still from Nexus, everything else seems good, will test again with both kernel options before it is posted.
(History of garbage done)
Bootloop / no boot - needed libs from port, may regress servers lib
Boot - constant crashing com.android.phone - LgeLte dependency fixed
Boot - NFC service crashed constantly - Was referencing non existent N4 files
more to follow.
Fixed some outstanding build.prop issues.
Upload to dev host began @ 1545 EST - gonna be awhile
http://d-h.st/ak8
<<-- Download link.
Remember, it's glitchy but I'll continue to work on it, BACKUP for the love of god before you flash
-gimp
sedspac fuch
reserved
still uploading?
Sent from my LG-E970 using xda app-developers app
Link is posted now, I had to give up earlier, connection resets every 3 minutes.
It's almost 2am here, so took about 20 minutes. Enjoy.
iamtha1 said:
still uploading?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Mods please move to og android development. Thanks
Sent from my Optimus G using xda app-developers app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog .
Device-specific source code for the Samsung Galaxy Mega 5.8 are available from
https://github.com/ghsr/android_device_samsung_i9152 and
https://github.com/ghsr/android_kernel_samsung_i9152
(For developers only - the patches are already included in the ROM)
Patch to system/core for RIL to work: https://gist.github.com/pawitp/5372673
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380.
Patch to frameworks/native to support legacy binaries: https://gist.github.com/pawitp/7891421
Patch to frameworks/native to workaround hwc issues: http://review.cyanogenmod.org/53162/ and https://gist.github.com/pawitp/7891444
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to external/chromium_org to workaround hwc issues: https://gist.github.com/pawitp/7910708
Patch to packages/app/SamsungServiceMode to fix service mode: http://review.cyanogenmod.org/57400/
Dual SIM Patches: https://gist.github.com/pawitp/9433442
Patch to frameworks/opt/telephony to fix non-looping ringtone issue: https://gist.github.com/pawitp/0f400e7b5cfb9bc70c25
Do not submit bug on CyanogenMod issue tracker
Dual-SIM
Dual-SIM works
Instructions on how to activate and deactivate dual SIM can be found in FAQ in the post CM 11.0 for Galaxy Grand Duos by @pawitp - HERE
Do not report bugs or issues in pawitp's Galaxy Grand Duos thread. Post them here
Extra Additions
APP2SD support - ability to move apps to external SD card
What is working?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
GPS
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo & video)
Video playback
Audio (playback & recording)
Everything else not listed under "known issues"
Known Issues
FM Radio does not work (you can use SpiritFM, but I'm not providing support for any problem)
Stock browser does not use hardware acceleration (Please use Google Chrome)
Downloads
ROM: CyanogenMod 11
GApps: find your own package
Installation
Make a backup!
Install a custom recovery
Download the latest build
Download Gapps
Recommended - Full wipe and factory reset
Install the ROM using your custom recovery
Optionally install the Google Apps Addon
Reboot.
Enjoy!
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again.
Changelog
20150528: Added stock off-mode charger res, WCDMA only network setting. Used updated kernel from cm-12.1. Optional overclocking to 1.6 Ghz. Don't turn capacitive button backlight on screen touch. Upstream merge.
20141113: Based on CM-11 M12. Kernel version 3.0.101. Other fixes and kernel improvements. Optional overclocking to 1.5 Ghz . Enabled KSM by default. Added CABC setting.
20141104: Changed DPI to 240. Updated sources
20141020: Fixed GPS
20141017: Initial release
Credits
CyanogenMod team
@pawitp
@xenon92
@LuK1337
@KINGbabasula
@CoolDevelopment
XDA:DevDB Information
CyanogenMod 11, ROM for the Samsung Galaxy Mega 5.8
Contributors
GHsR, Kiborg_Man
Source Code: https://github.com/CyanogenMod
ROM OS Version: 4.4.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2014-10-17
Last Updated 2015-05-28
ROM download not working/webpage not available (https://yadi.sk/d/jrN-35VRbsBwx)
muntinlupa said:
ROM download not working/webpage not available (https://yadi.sk/d/jrN-35VRbsBwx)
Click to expand...
Click to collapse
now rom uploaded on MediaFire https://www.mediafire.com/folder/8bkeoa0xfxaz5/CM-11.0
please someone mirror it on mega.com
Is this a fork of the grand duos cm11? Can you recommend another phone dialler compatible with CM?
Already experienced 2 crashes of the default browser when trying to zoom pages. I had to remove battery on those 2 occasions.
My setup is the latest build with micro gapps ....
Thank you OP! I was beginning to give up hope of us getting a true custom ROM.
Installed via TRWP. Excellent!
Crashed a few times with Google Now launcher and default browser. Installed Nova launcher and now working smoothly. You need to do a full wipe before installing otherwise it will keep crashing.
Thanks again GHsR! I am flying!!
Excellent work dev...
But I have 2 doubts. Please clear it
1) I have galaxy mega 5.8 with rooted 4.2.2 Jellybean rom. After installing this rom is it possible to revert back to 4.2.2 if needed?
2) In the link provided there are 2 files.
For installing the latest version do I need to install the old version first (20141017) and update with new one (20141020) or can I directly flash the 20141020 version?
My set up was similar to yours.
1. I backed up my old ROM using TWRP Recovery onto my external SD card; this way it can be easily restored should you wish to.
2. I directly flashed the new one without flashing the old one first.
VshnuP said:
Excellent work dev...
But I have 2 doubts. Please clear it
1) I have galaxy mega 5.8 with rooted 4.2.2 Jellybean rom. After installing this rom is it possible to revert back to 4.2.2 if needed?
2) In the link provided there are 2 files.
For installing the latest version do I need to install the old version first (20141017) and update with new one (20141020) or can I directly flash the 20141020 version?
Click to expand...
Click to collapse
I got 13398 Antutu score on this rom which is almost the same as the stock rom. Anyone got a higher score?
Is this ROM odexed or deodexed?
stonesolouk said:
My set up was similar to yours.
1. I backed up my old ROM using TWRP Recovery onto my external SD card; this way it can be easily restored should you wish to.
2. I directly flashed the new one without flashing the old one first.
Click to expand...
Click to collapse
Which version of TWRP are you using?
I am still on TWRP 2.6.3.Always worked for me so reluctant to upgrade!
I have to state that I am new to Cyanogenmod. Since this is unofficial then whenever I try to install another theme paly store says that the phone is unsupported. Any work around or trick to overcome this?
muntinlupa said:
I have to state that I am new to Cyanogenmod. Since this is unofficial then whenever I try to install another theme paly store says that the phone is unsupported. Any work around or trick to overcome this?
Click to expand...
Click to collapse
Well, not sure why, but themes are working great for me, maybe try downloading OTHER themes, as not all themes might support this device
Supervinom said:
Well, not sure why, but themes are working great for me, maybe try downloading OTHER themes, as not all themes might support this device
Click to expand...
Click to collapse
I go to the play store and it is stated that the cyanogen mod theme is incompatible with all my registered devices. Even the free ones cannot be installed. So how did you do it?
found another problem....The contacts that are already stored on both sims cannot be read by CM 11. I can confirm that the contacts are still there as I already transferred the sims to another phone.
Does USB OTG supports on this rom?
If anyone know any kernel patch for enabling usb otg support please post the link here....
VshnuP said:
Does USB OTG supports on this rom?
If anyone know any kernel patch for enabling usb otg support please post the link here....
Click to expand...
Click to collapse
I don't think the hardware support for otg usb is there....
muntinlupa said:
I don't think the hardware support for otg usb is there....
Click to expand...
Click to collapse
But I heard that using external power supply and necessory kernel patch otg support can be enabled atleast partially. I don't know whether it is true or not.
Today I am going to share Unofficial CyanogenMod CM11 ROM (HM2014813) based on Android 4.4.4 for Redmi 2. Can not wait to share with you all. So let's start.
Introduction About CM :
CyanogenMod is an open source operating system for smartphones and tablet computers, based on the Android mobile platform. It is developed as free and open source software based on the official releases of Android by Google, with added original and third-party code. It is based on a rolling release development model.
On 6 November 2013 the CyanogenMod team started pushing the code of CyanogenMod 11, based on Android 4.4 KitKat, to GitHub. The first nightly release of CyanogenMod 11.0 began rolling out for a selected number of devices on 5 December 2013. Since then, M-builds have been released every month for supported devices, offering a more stable experience than nightlies. With build M6 it was clarified that CyanogenMod would no longer be releasing final builds specially tagged "stable", but instead would utilize the rolling release model with M-builds representing a stable channel.
Important Note :
Your warranty is now voided.
I am not responsible for Bricked Devices, Dead SD Cards, World War 3 or You getting late on your date because the alarm app failed.
Please do some research if you have any concerns about flashing ROMs or any other doubts!
You are choosing to make these modifications, and if you point the finger at me for messing up your device, i will laugh at you.
P.S. But you can always get warranty back by flashing stock MIUI ROM.
Pre-Requirements (Reading It Beforehand):
Please backup the original system data (contacts, SMS, application data, etc.).
Please backup files to another location as the built-in storage (external storage or individual PC).
Custom Recovery Installed On Your Device.
Enabled Usb Debugging.
Phone Battery Charged Above 70% At Least.
Copy CM11 and Kitkat based GApps zips to your internal SDCard
Instructions (How To Flash/Install):
Boot into Recovery.
Clear Data.
Clear Cache.
Clear Dalvik Cache.
Flash CM11 ROM zip file from from internal SDCard.
Flash GApps zip file from internal SDCard.
Clear Cache and Clear Dalvik Cache.
Reboot.
Download Important Files :
GAPPS Link : Mod Edit: Link removed.
Download CM 11 ROM From here :
Rom OTA Build On 12-March-2015:
Link: Mod edit: Link removed.
Update Records:
17-01-2015 (DD-MM-YYYY):
Replacing the boot animation.
Now status bar shows headphone icon
Add support for alarm shutdown
Repair flashlight.
Other things are also fix. For more details visit the Rom Source.
10-01-2015 (DD-MM-YYYY):
In YIROM teamwork, the new device tree structures using the official kernel compiled from CM11 latest source code.
Basically all known functions are normal (Camera, WIFI, Bluetooth, Communications, Storage, etc.)
This is early build so you may encounter some bugs.
Please post feedback, bug details here or post bug logs, system bugs to below microblogging feedback in this edition ( original post feedback please). On the micro-Bo: http://weibo.com/zhaochengw and TD House microblogging: http://weibo.com/tdzhijia
Credit & Thanks To : syhost, lwang, FlourMO, YIROM, and bbs.phonesbbs.com team for ROM production process.
Thanks To : ShadowHawk, Kingofheart, C4cat, China_Mafia, King for testing this ROM.
Thanks To : @androidfuchs , @BalcanGSM , @Gtiu , @kellaw , @thenewmaker for guidance.
Thanks To : @subhrajitnath for sharing CWM Recovery for Redmi 2.
Special Thanks To : Cyanogenmod, martincz (Mokee Boss) and Goo.im @GooInsideme
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
XDA:DevDB Information
Cyanogenmod 11.0, ROM for all devices (see above for details)
Contributors
Ankurthe master
Source Code: Mod edit: Link removed.
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Rooted Redmi 2 with CWM or TWRP
Based On: Cyanogenmod
Version Information
Status: Stable
Stable Release Date: 2015-03-12
Created 2015-04-04
Last Updated 2015-04-04
Thanks for sharing. Waitting for next update.
Help downloading
I am unable to download the file from baidu site. can someone please help me.
justrajdeep said:
I am unable to download the file from baidu site. can someone please help me.
Click to expand...
Click to collapse
Just use this thread: http://forum.xda-developers.com/android/development/hm201481x-cyanogenmod-11-0-t3159419
I don't get the point of this thread since the other one is much more detailled and have real download links.
Guys, please stop using Baidu. We're not on miui forums.
Make rebuit of cm11 for redmi 2 using official kernel.it would be more stable and smooth. Because cm13 is most stable ROM for now a days and its use some official kernel of kitkat.and think if you remake the cm11 with official kernel what it would be ?
Thread closed.
Account inactive, improper source.
CyanogenMod 13 nightlies started, checkout its thread!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 Lollipop, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
IMPORTANT INFORMATIONS
- Root is now disabled by default on CM12.1. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
- CyanogenMod 12.1 comes with Cyanogen Recovery by default, if you don't like it you can flash alternative recoveries using IsoRec
I'll not support users and answer questions from users which:
- Are running a custom kernel
- Have flashed mods
- Modified system files
- Didn't follow my instructions
- Are unfriendly
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/I9100_Info
Known Issues: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_i9100
Changelog: http://www.cmxlog.com/12.1/i9100
First time installation instructions:
Download CM-12.1-XXXXXXXX-NIGHTLY-i9100.zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Wipe all your data
Flash CM-12.1-XXXXXXXX-NIGHTLY-i9100.zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
CM12.1 official nightly builds:
http://download.cyanogenmod.org/?device=i9100
Recommended Google Apps:
http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Choose Pico version to fit in the /system partition.
If you like my work, consider making a small donation
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy S II
Contributors
Lysergic Acid
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Kitkat Compatible Recovery
Based On: AOSP
Version Information
Status: Nightly
Created 2015-07-01
Last Updated 2016-02-04
Reserved
Thank you for the hard work Lysergic and congratulations for the success so far.
...
Update from latest Unofficial to first Official through OTA was unsuccessful. Now flashing from CM Recovery and will flash GAPPS as the Google services are not working after the OTA update.
edit: gapps still not working after flashing official build + gapps from recovery. Any chance to fix it without factory reset?
Solution: "you can clear the play services data to fix that"
---
update: I got better performance with the first official build compared to the latest unofficial.
Reserved
Congratulations LA.
Hope users will provide useful feedbacks and logcats in this thread to help you make this rom even better.
Cheers !
Congratulations
Finally your Hard Work Paid it off.
Congratulations Lysergic Acid!
there is a way to fix the crashing gapps but it will take mashing the screen to get there just wipe the gapps services data and that fixed it for me.
abdulhkeem said:
there is a way to fix the crashing gapps but it will take mashing the screen to get there just wipe the gapps services data and that fixed it for me.
Click to expand...
Click to collapse
Thanks a lot @abdulhkeem, it worked and this saved me a lot of time. :good:
My phone seems very hot under the camera, expecially when leaved attached to AC power... much more than on KK...
I made all the possible wipes/formats and checked with betterbatterystats but I cant find anything strange...
Thanks so much for this @Lysergic Acid!
I have been following since November last year and all I can say is what an amazing achievement!
Congrats to you and all the great devs that helped you get to where you are now.
Can't wait to see what is to come with the official tag on the ROM now.
Regards,
Jleoz.
lost root
Looks like I lost root with the official build. Yes, the root access is enabled in dev options. Tried rebooting, disable-enable, re-flash, still does not have root.
essenov said:
Thank you for the hard work Lysergic and congratulations for the success so far.
...
Update from latest Unofficial to first Official through OTA was unsuccessful. Now flashing from CM Recovery and will flash GAPPS as the Google services are not working after the OTA update.
edit: gapps still not working after flashing official build + gapps from through recovery.
Any chance to fix it without factory reset?
Click to expand...
Click to collapse
As already said, you can clear the play services data to fix that, but I'm working on a fix for the backup tool.
Can't wipe data
I'm unable to wipe data/factory reset from the new cyano recovery. Same thing if i try wiping from settings, is someone having same issue?
@Hazard- Me too, but also I can`t install any *.zip package.
it says unable to open efs/metadata (more or less). I thought efs folder is untouched on wipe, isn't it?
No APN data available so mobile data can't also be enabled.
Nice!
Great work @lysergicacid !! REALLY THANKS!!!
Now I can only hope, that my S3 will also get Official.
I have just written to @JustArchi , would you tell him what you have done to get official? Thanks!
kostelo said:
No APN data available so mobile data can't also be enabled.
Click to expand...
Click to collapse
Same here, but just search for carrier configuration and create an APN yourself, it's easy!
Dr.Fix said:
Same here, but just search for carrier configuration and create an APN yourself, it's easy!
Click to expand...
Click to collapse
I know my man. I already have. I 'm just reporting the bug in case it was missed.
LineageOS14.1 (Nougat) unofficial builds for the Droid Razr
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
These are WIP builds of porting LineageOS 14.1 to the Droid 4 (and also other devices using the same device/motorola/omap4-common-infrastructure). They probably won't work, so don't expect too much. Use on your own risk!
Builds:
Current official builds:
https://download.lineageos.org/spyder (Droid Razr)
https://download.lineageos.org/umts_spyder (Razr)
(When migrating from Lineage unofficial, flash this first (manually mount /data in TWRP before flashing and unmount it afterwards) and then directly flash the new image without rebooting)
Su addon for official builds: http://droid.cs.fau.de/lineage-14.1/addonsu/ (The official addon doesn't currently install on Omap4)
Manual beta builds:
http://droid.cs.fau.de/lineage-14.1/
Changes (only device/family specific, CM base is always synced before build and contains more changes):
2017-06-10:
Hotspot fixed
Security updates
CM base updated
Last build before enabling official builds
2017-05-15:
Security updates
CM base updated
2017-04-11:
Fixed mobile data on Verizon
2017-04-05:
DRM playback fixed
2017-04-04:
Camcorder working, thanks to @Android-Andi (thumbnail picture is still wrong, but recorded video seems fine). This probably also fixed other media-related issues.
CM base updated
2016-11-27:
CM base updated
2016-11-13:
SELinux is enforcing
PackageInstaller works on ext3-based userdata again
2016-11-05:
First build
What's working:
Phone (tested on Verizon and on GSM/UMTS in Europe)
Mobile data
WiFi
GPS
Camera
Video recording
Playback of DRM-protected content
Reboot to recovery
What's not working:
Probably most everything else, including, but not limited to:
HDMI
Data encryption (investigating, needs new unreleased safestrap)
Gapps:
OpenGApps
If you install Gapps after the ROM has been booted for the first time you either need to wipe data or manually delete /data/system/users/0/runtime-permissions.xml and reboot. Without this Gapps will crash constantly. This is due to a new permissions-system introduced in Marshmallow.
Installation:
You need a recovery supporting SELinux
A version of Safestrap (3.75) which supports SELinux can be found here: https://github.com/stargo/android_packages_apps_Safestrap/releases/tag/v3.75
A newer version of safestrap which will format userdata as ext4 will be released shortly. You can also just reformat userdata to ext4 in the old Safestrap for now.
Please read the instructions on how to install this version and follow the order of the steps in it.
GSM users with XT912:
These versions (both unofficial and official) automatically switch to GSM/UMTS without installing additional patches.
Source / Repositories:
spyder device-support: https://github.com/LineageOS/android_device_motorola_spyder/tree/cm-14.1
umts_spyder device-support: https://github.com/LineageOS/android_device_motorola_umts_spyder/tree/cm-14.1
omap4-common device-support: https://github.com/LineageOS/android_device_motorola_omap4-common/tree/cm-14.1
omap4-common kernel: https://github.com/LineageOS/android_kernel_motorola_omap4-common/tree/cm-14.1
local manifest to build cm-13 for the Motorola Omap4 devices: http://droid.cs.fau.de/lineage-14.1/local_manifest.xml
XDA:DevDB Information
LineageOS 14.1 for Motorola Droid Razr, ROM for the Motorola Droid RAZR
Contributors
stargo, Hashcode, joojoobee666, Dhacker29
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-06-10
Created 2016-11-13
Last Updated 2017-06-23
Thank you so much stargo what gapps do you use the pico ones ?
tydiamond11 said:
Thank you so much stargo what gapps do you use the pico ones ?
Click to expand...
Click to collapse
The 7.1 Pico work perfectly.
Sent from my Motorola XT912 using XDA Labs
Bobcus Leper said:
The 7.1 Pico work perfectly.
Sent from my Motorola XT912 using XDA Labs
Click to expand...
Click to collapse
I figured out that i was trying to use stock slot lol
Thank you so much guys for remembering razr i hope we will go a long way with you and with razr.
Do you think there is any hope that the bug the RAZR has had since CM 10.2 (that prevents video uploading) could be fixed on Nougat? And if not, is there anyone who knows why it doesn't work?
Thank you for this ROM @stargo :good:
Does it include a kernel image? I could not find it from http://droid.cs.fau.de/cm-14.1/cm-14.1-20161113-UNOFFICIAL-spyder.zip
heroxbd said:
Does it include a kernel image? I could not find it from http://droid.cs.fau.de/cm-14.1/cm-14.1-20161113-UNOFFICIAL-spyder.zip
Click to expand...
Click to collapse
Yes, all CM based ROMs include kernels.
Sent from my Motorola XT912 using XDA Labs
Bobcus Leper said:
Yes, all CM based ROMs include kernels.
Sent from my Motorola XT912 using XDA Labs
Click to expand...
Click to collapse
Not all
Thanks for rom !!
It's seems lag, will any kernel / settings can solve it ?
@stargo,
Thanks for keeping up CM for these devices.
This 14.1 runs very smooth on a X910, but when installed with GApps it becomes much slower (maybe official 13.0 too, but I didn't test it without gapps). The broken File Manager is not nice, however.
Positively, it doesn't include CM Bug Report app, which always crash in CM13.0 (triggered by crash in a page inside Privacy Guard).
But, I see there is no "App data usage" (restrict apps Wi-Fi or Cellular data) in Privacy Guard. Was it removed from 14.1 or just not ready yet?
Just out of curiosity, could you tell me if Safestrap is the only variant of TWRP that works in spyder/umts_spyder? (I couldn't find original TWRP for these). No, I don't dislike Safestrap, I think it's very nice project, especially for preserving stock rom and allowing multi-boot, despite possible performance penalties.
I have another question about Safestrap: If I boot into stock and make a backup of its .img files (they are in internal sdcard/safestrap), do I need a backup made inside twrp or they are the same?
Will you make available a test build of the next Safestrap version?
williamlaw said:
Thanks for rom !!
It's seems lag, will any kernel / settings can solve it ?
Click to expand...
Click to collapse
[emoji6] http://droid.cs.fau.de/jjb666/Kernels/cm14/2016-11-08/
P.S. It works such at was on cm13 (cm13 versions), I mean - nice for battery and performance
from XT910, 925 or 1225 using Tapatalk
Ducadim said:
[emoji6] http://droid.cs.fau.de/jjb666/Kernels/cm14/2016-11-08/
P.S. It works such at was on cm13 (cm13 versions), I mean - nice for battery and performance
from XT910, 925 or 1225 using Tapatalk
Click to expand...
Click to collapse
Which one is great to use ?
Thanks
williamlaw said:
Which one is great to use ?
Thanks
Click to expand...
Click to collapse
For me - cm14.1-OC-FullScale-Lite-2016-11-08.zip, I have tried all versions on cm13, this was only one I can install (just for cm13, of course), so I use the same on cm14.1 and I am not disappointed, but I am have not tried others...
Using daily. Thanks!
Android OS / Cyanogenmod-system Batterydrain
I have this problem since CM13. I tried cm-13.0-20160816-SNAPSHOT-ZNH5YAO0FG-umts_spyder.zip and many nightlies but it's always the same: android os or cyanogenmod system is with 20-40 % the number one batterydrainer and always keeps the device active. With the first cm13 builds and with cm11 I never forced this problem and it made one day but now I can't find a build which doesn't has this problem anymore. I tried different kernels on cm13 but without any effect.
I hoped it would be better on cm14 but unfortunatly it's exactly the same..
Does anyone has an idea or a solution to this problem?
Thank you for any answer!
KonradL said:
always keeps the device active.
Click to expand...
Click to collapse
Are you sure it is not some app you installed, or accidentally changed Android settings to avoid turning screen off? Did you cleanly installed Cm the last time?
"Error code 70" during installing pico GAps
Thank you so much stargo for your work!
I have putted it to the slot 1 with pico GApps. Works great!
But when i putting it in to the stock slot i getting "Error code 70" during installing pico GAps. I tried reformat userdata to ext4.
I checked rm -rf instead of formatting then Wipe/advanced/checked data/Repair or Change File System - and change to EXT4 but when i go back it still ext3.
How to solve this issue?
Thank you.
spacemonkeyss said:
Thank you so much stargo for your work!
I have putted it to the slot 1 with pico GApps. Works great!
But when i putting it in to the stock slot i getting "Error code 70" during installing pico GAps. I tried reformat userdata to ext4.
I checked rm -rf instead of formatting then Wipe/advanced/checked data/Repair or Change File System - and change to EXT4 but when i go back it still ext3.
How to solve this issue?
Thank you.
Click to expand...
Click to collapse
Is the error code 70 stating that you don't have enough space to install gapps?
If you exit the to the first screen in safestrap, check again that data is EXT4 in advanced wipe.