THESE ZIPS WILL BE UPDATED as new firmware comes available
This will not Re-Lock or Unlock your bootloader (Meaning this will work on either locked or unlocked bootloaders)
What you need:
Root & Recovery on KitKat or Lollipop
A Brain
One of the ZIP files (Latest are better)
~Latest Zips~
D5833 23.5.A.1.291 (6.0.1) ~~D5803 23.5.A.1.291 (6.0.1)
~~UPDATE: If you wish to update to a new pre-rooted zip just download the ZIP and flash over your old pre-rooted firmware, no need to wipe anything
ANDROID MM INSTRUCTIONS
Have a rooted firmware with recovery installed
Download one of the ZIP's and move it to the SDCard of your phone
Enter Recovery and make a full nandroid backup if you have not already (you can restore this later if anything happens)
Wipe System, delvik, and Cache, DO NOT REBOOT, flash the Zip & then Reboot (It will take a while to reboot as it is updating everything, also you will be wiping 'System' to stop any errors caused by previous TWRP versions)
Enjoy
INSTRUCTIONS
Have a rooted firmware with recovery installed
Download one of the ZIP's and move it to the SDCard of your phone
Enter Recovery and make a full nandroid backup if you have not already (you can restore this later if anything happens)
Flash the Zip & Reboot (It will take a while to reboot as it is updating everything)
Enjoy
Older FILES
-- What ever ZIP you flash won't matter, it basically just changes your phone's software model (D5833 -> flash D5803 -> Phone is now D5803) --
D5833
D5833 23.4.A.1.232
D5833 23.1.A.0.726
D5833 23.2.A.1.62
D5833 23.1.A.1.28X (No Baseband/TA~~Xposed)
D5833 23.4.A.0.546
D5833 23.5.A.0.575
D5833 23.5.A.1.291
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
D5803
D5803 23.1.A.0.726 (No Baseband)
D5803 23.1.A.1.28 (No Baseband/TA)
D5803 23.5.A.0.570
[URL="https://mega.nz/#!tcBmCC6A!zVwQU-1OI5ejFyOanCQsox4HDEhcWAgjiqCTcaWpAjE"] D5833 23.5.A.0.575
D5803 23.5.A.1.291
[/URL]
About ZIPS
D5833
D5833 23.4.A.1.232 is stock firmware based on the Generic Singapore ftf, has the latest XZDR and SuperSU
D5833 23.1.A.0.726 is stock firmware based on the AU Generic ftf, has SuperSU 2.46 and XZDR 2.8.14
D5833 23.2.A.1.62 Is Stock firmware based on the Generic Hong Kong ftf, has SuperSU 2.46 and XZDR 2.8.14
D5833 23.1.A.1.28 Is stock firmware based on the Generic Singapore ftf (No Baseband/TA), has SuperSU 2.46 & XZDR 2.8.14
D5833 23.4.A.0.546 Is stock firmware based on the Generic Singapore ftf, SuperSU 2.46 & XZDR 2.8.21
D5833 23.5.A.0.570 Is stock firmware based on the Generic Australian ftf, SuperSU 2.71 & TWRP 3.02-0
D5833 23.5.A.0.575 Is stock firmware based on the Generic Australian ftf, SuperSU 2.71 & TWRP 3.02-0
D5833 23.5.A.1.291 Is stock firmware based on the Generic Australian ftf, has SuperSu 2.71 and TWRP 3.02
D5803
D5803 23.1.A.0.726 Is stock firmware based on the US Generic A.0.726 ftf (No Baseband/TA), has SuperSU 2.46 and XZDR 2.8.14
D5803 23.1.A.1.28 is stock firmware based on the Nordic Generic A.1.28 ftf (No Baseband/TA), has SuperSU 2.46 and XZDR 2.8.14
D5803 23.5.A.0.570 is stock firmware based on the generic USA android 6, has SuperSU 2.71 & TWRP 3.0.2-0
D5803 23.5.A.0.575 Is stock firmware based on the generic CE1, has superSU 2.71 & 3.02-0
D5803 23.5.A.1.291 Is stock firmware based on the US Generic ftf, has SuperSU 2.71 and TWRP 2.01
To use an external SD you will need to install SDFix
XPOSED is not installed with the latest 5.1 zips, but you can download from this link: Official lollipop/Marshmallow Xposed (Or from the attached files below)
If you liked this give it a big Thumbs Up
If you encounter any problems please ask for help or fill out a bug report at the top of the page
USEFUL MODS
PS4 Remote Play - No root check
Brighter flashlight MOD
DESIGN by MixaDJ (Awesome Themes - Download a theme from "Fresh" as they have custom keys)
Xperia Home Mods
SOUND MOD (Compiled for many devices, works on Z3C)
Cyberian Camera
CREDITS:
Chainfire for SuperSU
Nut for XZDR
zxz0o0 for his PRFcreator
---------------------------------
**I will take no responsibility for any damage done to your device - There is a very low chance of anything happening**
XDA:DevDB Information
Lollipop/Marshmallow Pre-Rooted Firmwares , ROM for the Sony Xperia Z3 Compact
Contributors
nzzane
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Any D58XX with Root & Recovery
Version Information
Status: Stable
Current Stable Version: All Firmwares
Stable Release Date: 2016-08-15
Created 2015-05-06
Last Updated 2017-03-29
my mistake
Can I use this ROM on my D5803?
jereMarfil24 said:
Can I use this ROM on my D5803?
Click to expand...
Click to collapse
Yep - If you flash the D5833 I am pretty sure it will also flash your baseband, If you flash the D5803 zip i am uploading it will not flash your baseband
If your mobile data stops working after flashing D5833 just flash D5803 baseband with flashtool.
Other than that should work fine
Sent from my D5833 using XDA Free mobile app
Thanks for the info bro.
I can flash this if coming from CM?
jeff5891 said:
I can flash this if coming from CM?
Click to expand...
Click to collapse
If you wipe; Data/System (just to be safe)
Then yes and after you flash it you can re-lock your bootloader if you want - or keep unlocked and use this DRM function patch (If you wanted DRM functions with a custom kernel)
I've been using this for about a week. It works well and I haven't had a problem.
Thanks!
Sorry if it will sound noob
But i can flash this with locked bootloader ?!,
Thanks
sparxx4 said:
Sorry if it will sound noob
But i can flash this with locked bootloader ?!,
Thanks
Click to expand...
Click to collapse
Yep
I will actually mention that in the post.
nzzane said:
Yep
I will actually mention that in the post.
Click to expand...
Click to collapse
My bad i didnt notice that
Thanks for your help
New Sony Firmware just released, hope you continue this thread with this newer version.
FSRBIKER said:
New Sony Firmware just released, hope you continue this thread with this newer version.
Click to expand...
Click to collapse
Thanks for letting me know, I will check it out
Update
Thread has been updated to support the new 23.1.A.1.28 firmware which includes bug fixes and a close all button
nzzane said:
Thread has been updated to support the new 23.1.A.1.28 firmware which includes bug fixes and a close all button
Click to expand...
Click to collapse
Can you please update the first post with the new .28 Customized Singapore FW for D5833?
Thanks.
Yep, I will be uploading it in due time (soon)
Sent from my D5803 using XDA Free mobile app
So long story short. If you're already on pre-rooted stock 5 firmware, you just flash the new one over the old, right?
Hi
Does your zip of the 23.1.A.1.28 firmware contain the baseband ? Btw, could you tell me which version it is ?
Thank you for your work.
nzzane said:
Yep, I will be uploading it in due time (soon)
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
Turns out the newest FW for D5833 is 23.2.A.1.62 / R8C, customized Hong Kong.
The date of the kernel is Apr 20 as opposed to Mar 30 of .28 FW, so it would be great if you could upload this one instead of the .28 SG.
Thank you for all you've done.
http://forum.xda-developers.com/showpost.php?p=60567846&postcount=1160
Wzza said:
Hi
Does your zip of the 23.1.A.1.28 firmware contain the baseband ? Btw, could you tell me which version it is ?
Thank you for your work.
Click to expand...
Click to collapse
Yep the 23.1.A.1.28 has no baseband or Ta partition, so you can flash it, I have a D5833 phone running D5803 A.1.28
fusk said:
So long story short. If you're already on pre-rooted stock 5 firmware, you just flash the new one over the old, right?
Click to expand...
Click to collapse
Yep just flash the new zip over your old one, no need to wipe data or anything
fijasko said:
Turns out the newest FW for D5833 is 23.2.A.1.62 / R8C, customized Hong Kong.
The date of the kernel is Apr 20 as opposed to Mar 30 of .28 FW, so it would be great if you could upload this one instead of the .28 SG.
Thank you for all you've done.
Click to expand...
Click to collapse
In the mean time you can flash the new universal ZIP, but i will upload it under OLD/Device Specific
Related
Bootloader Changer 2.3.2
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this MOD
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Review (French with English subtitle) OLD VERSION, NO LOLLIPOP SUPPORT
This mod requires a Custom Recovery (TWRP, CWM, Philz Touch).
Bootloader Changer allows you to change the bootloader on the fly through AROMA (graphically)!
You can change the rom as you like, switch between Jellybean for KitKat or simply Lollipop.
You can update your recovery with it (recommended).
Bootloader Changer support the multi language (French, English, Portuguese, Czech, Spannish, Russian, Italian, Serbia, Croatia, Bosnia, Montenegro, Turkish & you can help for other languages )
Supported bootloader/boostacks :
Jellybean
KitKat
Lollipop(*)
Lollipop Bumped(*)
Lollipop Lokified(*)
* Not available for D803
How to :
Copy zip and md5 files in the same directories.
Use Bootloader Changer
Bootloader : Select your bootloader
Assert : yes (recommended)
Reboot : Recovery (highly recommended)
Update recovery : yes (highly recommended if not up to date)
Full wipe except sdcard.
Flash your new ROM
simpleBootstacks is a simplified version of BootloaderChanger, no AROMA, only one bootstacks/bootloader.
Just the basics things, no more
Press the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
button if you like my job
Bootloader sheet and guide was also available here : https://docs.google.com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0
Help me for translate
Just bring one of these texts in the language of your choice
Then post it on the forum, I will add in a future update and you will be in the credits.
Please, if you can do it on github, you are a GOD!
All languages are available here.
Credits :
@blastagator : For his wonderful recovery and his contributors: http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
@ggrammer : For giving me the D803 bootloader.
@Rayaxe: For the Portuguese translation.
@k0s&n: For the Czech translation.
@shakeb4use: For the Spannish translation.
@LidaFlorida: For the Russian translation.
@kRel: For the Italian translation.
@Drgravy, @Rashed97, @Tsunamical Some sources that have helped me, thank to all contributors : https://github.com/Drgravy/bootstacks
@Brontok @Gradjevinac : For the Serbia, Croatia, Montenegro and Bosnia translation.
@The Marionette : For the new Croatia translation.
@iko11 : For the turkish translation and test.
>For the CM/AOSP Lollipop ROM ,you need to use KK Bootloader !
You actually need JB bootloader for those. Nice tool anyway!
I always used the kitkat bootloader ...
But thanks i'll édit that
very great work
Can I use this to switch back to the lollipop bootloader but without flashing a new rom. I got the blastagator bumped TWRP was going to flash a rom but decided to stay on stock and its been acting weird. Wondering if downgrading the bootloader is causing this.
Does it work for D800?
Jordamo said:
Does it work for D800?
Click to expand...
Click to collapse
No as the bootloader files are meant for the D802.
Guys 1.2 is also released of the Bootloader Changer.
Nice work OP:good:
Hid3rs said:
>For the CM/AOSP Lollipop ROM ,you need to use KK Bootloader !
You actually need JB bootloader for those. Nice tool anyway!
Click to expand...
Click to collapse
Cm12 works best with kk bootloader
maydayind said:
Cm12 works best with kk bootloader
Click to expand...
Click to collapse
Are you sure you're talking about bootloader and not baseband? I don't think it would boot with KK bootloader at all.
For that, they should merge this patch.
Shouldn't this be in android development?
Hid3rs said:
Are you sure you're talking about bootloader and not baseband? I don't think it would boot with KK bootloader at all.
For that, they should merge this patch.
Click to expand...
Click to collapse
Of course... U are right
Sorry for not answering, I thought receive notifications when someone posted a message.
I'll bring the subject up to date and answer questions when I'm back home
Thank you everyone
Choristav said:
Shouldn't this be in android development?
Click to expand...
Click to collapse
I don't have the permission to post in this forum for the moment :/
New versions added! (d803)
I leave everything separate, needless to regroup all variants in one zip .
Not many people have several G2
I will add more models with time.
If some people want to send me their bootloader, I'm interested.
NevaX1 said:
New versions added! (d803)
I leave everything separate, needless to regroup all variants in one zip .
Not many people have several G2
I will add more models with time.
If some people want to send me their bootloader, I'm interested.
Click to expand...
Click to collapse
Thank you mate
A question, which partitions does it change exacty? Just aboot? Or laf and other like autorec?
4Freedom said:
Thank you mate
A question, which partitions does it change exacty? Just aboot? Or laf and other like autorec?
Click to expand...
Click to collapse
Just click on one of the download links and browse to the folder nevax and then choose kk, jb or lp folder then you will see which partitions are included
wulsic said:
Just click on one of the download links and browse to the folder nevax and then choose kk, jb or lp folder then you will see which partitions are included
Click to expand...
Click to collapse
Okay, last question
I am on a clean stock lollipop v30b with TWRP Bumped 2.8.6.1 installed and a KK bootloader.
To install official cyanogen i just need to download the file above and let install or i need to change recovery because of JB bootloader or Baseband or other?
4Freedom said:
Okay, last question
I am on a clean stock lollipop v30b with TWRP Bumped 2.8.6.1 installed and a KK bootloader.
To install official cyanogen i just need to download the file above and let install or i need to change recovery because of JB bootloader or Baseband or other?
Click to expand...
Click to collapse
The recovery should be fine I guess as it's an bumped one but just flash the nevax bootloader changer as it will flash the right bootloader/bootstack and also the good twrp recovery. So the only thing you have to do is flash the right baseband indeed. I am not sure or you need for cyanogenmod kitkat or jellybean bootloader as I didn't flashed official nightlies anymore for months. The reason why is the same as in your description.
Hey, this thing actually worked on my D802. I was coming from CloudyG3 2.1, and now I'm on lolli, and everything's is perfect order
Thanks brah!
Question
Why do AOSP Roms(cm12.1) not allow Lollipop or Kitkat Bootloader?
xXRapToRiXx said:
Why do AOSP Roms(cm12.1) not allow Lollipop or Kitkat Bootloader?
Click to expand...
Click to collapse
Because the Loki exploit that allowed for custom firmware was patched in these bootloaders.
Sent from my LG-D802 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
I am not responsible for bricked devices,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Installation instructions:
Installing Euphoria-OS for the first time, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery/Team Win Recovery Project
- Please Go Here to Instal TWRP on FOTA partition to avoid loosing your recovery each and everytime you update
- Copy GApps , ROM ZIP to your SDCard
- Boot into Recovery
- DO A CLEAN INSTALL (DATA WIPE/FORMAT SYSTEM)
- Flash Euphoria-OS zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Don't restore system data using Titanium Backup!
Upgrading from an earlier version:
- Copy the ROM ZIP to your SDCard
- Boot into Recovery
- Flash the ROM zip from SDCard
- Reboot
Download :
https://www.androidfilehost.com/?w=files&flid=39631
Kernel - https://github.com/CyanogenMod/android_kernel_sony_msm8974/
Sources - https://github.com/Euphoria-OS-Legacy
XDA:DevDB Information
Official Euphoria-OS 1.1 ( LYZ28K ), ROM for the Sony Xperia Z3
Contributors
BlaqueDroid, infected_, Rohan purohit
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod, AOSP
Version Information
Status: Stable
Stable Release Date: 2015-09-20
Created 2015-09-20
Last Updated 2015-09-20
Reserved
It seems that there is a problem with dowload link., It takes me to a log in page.
Thak you for providing more choices for our Z3!
blackhawk_LA said:
It seems that there is a problem with dowload link., It takes me to a log in page.
Thak you for providing more choices for our Z3!
Click to expand...
Click to collapse
Check it now it should be fine now
Jm_Willing said:
Awesome! Any changes compared to the build you have send me on thursday?
Click to expand...
Click to collapse
Only Upstream changes related to the Kernel and Device tree
I'm using it since yesterday and I'm very happy it . I have not found any single bug, and the ROM is really fast.
I like all the extra features it has compared to CM too.
I will see how battery life is, and maybe test with M5 kernel.
Thanks!
Is install if on locked bootloader?
Does it have the camera "fish eye" bug?
Jm_Willing said:
I don't know why everyone is talking about it, I never had this, could you please explain what it is and how to reproduce it?
Click to expand...
Click to collapse
An example of what it is can be found in this post:
http://forum.xda-developers.com/showpost.php?p=62300831&postcount=1047
Jm_Willing said:
I don't know why everyone is talking about it, I never had this, could you please explain what it is and how to reproduce it?
Click to expand...
Click to collapse
Sartre said:
An example of what it is can be found in this post:
http://forum.xda-developers.com/showpost.php?p=62300831&postcount=1047
Click to expand...
Click to collapse
its a known bug. despite camera is working with rhine camera stack, Z3 has a different sensor. check the photo in attachment..
notice the lines (that should be straight) on the photo.
the good news is that cam is almost fixed on AOSP, with kernel 3.10.x ..
regards
Do I need to unlock bootloader?
Thanks
savo83 said:
Do I need to unlock bootloader?
Thanks
Click to expand...
Click to collapse
Yes, all AOSP/CM ROMs need unlocked bootloader.
Sent from my D6603 using Tapatalk
sherlock5545 said:
Yes, all AOSP/CM ROMs need unlocked bootloader.
Sent from my D6603 using Tapatalk
Click to expand...
Click to collapse
Is it stable for every day use? A guide would be great as the Z3 is much more complex than my OPO.
Can you help? Really miss AOSP
Thanks
savo83 said:
Is it stable for every day use? A guide would be great as the Z3 is much more complex than my OPO.
Can you help? Really miss AOSP
Thanks
Click to expand...
Click to collapse
What I can Tell you is its really stable and good battery so far, and everything works as it should
BlaqueDroid said:
What I can Tell you is its really stable and good battery so far, and everything works as it should
Click to expand...
Click to collapse
I confirm that 100%.
Enviado desde mi Xperia Z3 mediante Tapatalk
Theme engine or layers?
Sent from my D6603 using XDA Free mobile app
Okay, quick question guys. Is this what is required?
1) Flash stock JB ROM
2)Root
3)Back Up TA Partition/UL BL
4)Install recovery (any TWRP??)
5)Flash boot.img from zip
6)Gapss, reboot etc.
Will this work? Will I just flash SuperSU to get root after ROM installed?
Thanks
savo83 said:
Okay, quick question guys. Is this what is required?
1) Flash stock JB ROM
2)Root
3)Back Up TA Partition/UL BL
4)Install recovery (any TWRP??)
5)Flash boot.img from zip
6)Gapss, reboot etc.
Will this work? Will I just flash SuperSU to get root after ROM installed?
Thanks
Click to expand...
Click to collapse
no need to flash JB...
* backup TA partition, and unlock bootloader.
* place the phone in fastboot mode.
* grab the boot.img from the latest build and: sudo fastboot flash boot boot.img
* grab latest TWRP for Z3 from here: http://www.infectedbuilds.net/downloads/z3/TWRP/
* flash TWRP: sudo fastboot flash recovery z3fotatwrpv4.img
* reboot into recovery.
* wipe/format /system /data /cache /dalvik.
* flash latest available build, and flash gapps.
* reboot and you're done.
infected_ said:
no need to flash JB...
* backup TA partition, and unlock bootloader.
* place the phone in fastboot mode.
* grab the boot.img from the latest build and: sudo fastboot flash boot boot.img
* grab latest TWRP for Z3 from here: http://www.infectedbuilds.net/downloads/z3/TWRP/
* flash TWRP: sudo fastboot flash recovery z3fotatwrpv4.img
* reboot into recovery.
* wipe/format /system /data /cache /dalvik.
* flash latest available build, and flash gapps.
* reboot and you're done.
Click to expand...
Click to collapse
What a champ. I have my unlock code but having difficulty rooting at the moment but this is work PC related.
FYI, I'm running Sony Concept ROM. Will I still be able to back up TA?
Thanks again.
savo83 said:
What a champ. I have my unlock code but having difficulty rooting at the moment but this is work PC related.
FYI, I'm running Sony Concept ROM. Will I still be able to back up TA?
Thanks again.
Click to expand...
Click to collapse
you wont be able to root the Concept ROM that easily, unless you use a custom proper kernel for it. Sony introduced on Concept, verified boot security.. unrootable (unless like i said before) for now.
i would flash Sony stock .546, and then do steps i mentioned.
regards.
You search better Sound, better Battery Life and better Performance and alot more?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features- XZDR 2.8.21, SuperSU 2.49, Pre-Rooted, SuperUser Mod, System R/W, SD Card R/W Permissions
- Ambient Display, Task Manager in Statusbar, Camera Improvements
- RXSW ROM Settings, SystemUI/Mobile Radio Active fixes included in ROM
- Custom Project Desire Sound Engine, Stock Kernel included, Debloated & Deodexed
- Boot time, SD/Internal Card, RAM Management, Performance, Battery Life and Stability improved
- Check the ROM to find even more Features
Changelog
- Sound Engine updated to v7 [Some XtremeMusic Files combined with latest Project Desire 10.0 and modified by me]
- Updated all Apps to Z5 Premium ones [Thanks gamzekal]
- Fixed Wallpaper Crop not available
- Xperia Z5 Blue Bootanimation [thanks alone in dark]
- Assertive Display 1.3 from Z5
- Improved RXSW Menu with more Options like Kcal and AppOps
- Updated all included Apps to latest available ones
- Increase xLoud gain
- Improve Sound alot thanks to the Feedback of all Users
- Viper4Android works again
Main ROM & UpdatesMain rom link
Full rom, everything included
How to install1. Backup everything so you cannot blame me for your data loss
2. Flash rom
4. Reboot
Addons
Remote Play [Latest Remote Play App compatible with PS4 3.0 FW and Root]
Xposed Official Thread [Install Xposed Framework & App] [Wipe Cache & Dalvik/ART]
Camera Apps & Movie Creator & Photo Editor Addon [v4]
Xperia Z5 new camera version 2.0 port
This port is made for the D5803 variant, so I don't know whether it works on other variants. Atm working on a universal Z3 to Z3c patch.
Credits
Wolfbreak
for creating such an awesome rom
and everyone else mentioned in the original post
This is for LB or UB? Because I tried and it does not boot
Edit: I flashed the rom and reboot without the patch and now is booting but it just play the boot sound nothing in display, I think is because of kernel. Help.
@kristijan15
Thanks for your work
You could try to port this rom: http://forum.xda-developers.com/z3/development/rom-moonwalker-epidemic-v1-5-0-t3167584
Or port existenz rom
EDIT: Flash V12.1 then flash the patch, RESULT phone no boot, only sony logo :/ help
chikrron said:
Or port existenz rom
EDIT: Flash V12.1 then flash the patch, RESULT phone no boot, only sony logo :/ help
Click to expand...
Click to collapse
I will look into it today afternoon...seems that the problem is in the updater script
mitzael said:
This is for LB or UB? Because I tried and it does not boot
Edit: I flashed the rom and reboot without the patch and now is booting but it just play the boot sound nothing in display, I think is because of kernel. Help.
Click to expand...
Click to collapse
Flash the stock kernel with flashtool
kristijan15 said:
I will look into it today afternoon...seems that the problem is in the updater script
Click to expand...
Click to collapse
Thanks, I'll waiting
chikrron said:
Thanks, I'll waiting
Click to expand...
Click to collapse
Fix for now...upload is still going, but for now copy everything from the patch zip except meta inf folder and paste it into the main rom zip (only version 12.1) and it install that zip and it will work...this is just temporary untill I upload the fixed version
Links and rom updated now everything should work without bugs
Hi,
I have a black screen continuously, even in the recovery
Can I flash it with LB?
_MutantX_ said:
Hi,
I have a black screen continuously, even in the recovery
Click to expand...
Click to collapse
Did you flash the updated version or old?
kristijan15 said:
Did you flash the updated version or old?
Click to expand...
Click to collapse
the updated version
the black screen is for the kernel, I flashed Advanced Stock Kernel and it boots so good
xkaiser said:
Can I flash it with LB?
Click to expand...
Click to collapse
Yes you can but follow the updated steps in the OP...after rom installation power off your device abd flash the stock kernel with flashtool but exclude everything else
Nice rom bro, could you port more z3 roms? ExistenZ rom for example? Thanks n.n
chikrron said:
Nice rom bro, could you port more z3 roms? ExistenZ rom for example? Thanks n.n
Click to expand...
Click to collapse
I am working on a universal patch that will work for any stock based z3 rom so you can run it on your sweet compact
kristijan15 said:
I am working on a universal patch that will work for any stock based z3 rom so you can run it on your sweet compact
Click to expand...
Click to collapse
Sounds Great...!!!! Thanks bro
Hi,
Where is the stock kernel
Gladyator23 said:
Hi,
Where is the stock kernel
Click to expand...
Click to collapse
Its contained in the ftf
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Z3/LEO/D6603 OMNI ROM UNOFFICIAL SABERMOD BUILDS
LOLLIPOP 6.0.1_r22
Current Build: 20160402
DOWNLOAD
NOT WORKING YET: CAMERA IS NOT AT 100%
CURRENT ISSUES: YOU TELL ME
ROM CODE COMPILED WITH LATEST SABERMOD ARM-LINUX-ANDROIDEABI 4.9.x (20160402)
KERNEL CODE COMPILED WITH LATEST SABERMOD ARM-EABI 4.9.x (20160402)
KERNEL SOURCE: https://github.com/infected-mm/android_kernel_sony_msm
BUGS REPORT
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK KERNEL
- USING GAPPS FROM SECOND POST
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
CHANGELOG:
https://changelog.omnirom.org/
BUILDBOT:
(intel core i7 3770k, asus p8z77-v, 16gb corsair vengeance pro 2133mhz cl11, msi gtx 970, 1x samsung 850 evo + 1x samsung 128gb ssd 840 pro, 4x western wigital wd3200aaks raid 10 array, samsung f1 1tb, seagate 2tb, silverstone olympia 1000w psu, antec 1200 high-tower)
(wc setup: swiftech apogee xt cpu-block, ek coolstream xtx 240 radiator, 2x scythe slipstream 120mm 1900rpm fans, swiftech mcp355 water-pump, danger den 5.25" reservoir bay)
DISCLAIMER:
These builds are freshly compiled/synced from Omni ROM open-source code.
XDA:DevDB Information
OMNIROM FOR Z3/LEO, ROM for the Sony Xperia Z3
Contributors
infected_
Source Code: https://github.com/omnirom
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Beta
Created 2016-02-12
Last Updated 2016-04-21
Reserved
Reserved
Testing
New BL
fastboot TWRP3.0 new BL
Full wiped
Flash this ROM and Gapps
Screen backlight is crashing on boot or sometimes need to lock unlock the phone to see the screen or wait a few seconds.
Bugs (nothing strange):
Some glitches
Camera is working but slow. Signal is working @aliw32619.
No cyanogenmod theme.
Trying to install root a way to do it ?
Skyllery said:
Testing
New BL
fastboot TWRP3.0 new BL
Full wiped
Flash this ROM and Gapps
For the moment the only bug is screen which is crashing on boot or sometimes need to lock unlock the phone to reactivate also seen on CrDroid. Some glitches
Camera is working but slow. Signal is working @aliw32619.
No cyanogenmod theme.
Trying to install root a way to do it ?
One question we need to install everytime .200 to have new bootloader if we return to 5.1.1 versions (even CM 12.1) or the new bootloader stay on it ? If we need to reinstall .200 with EMMA maybe it's my problem
Click to expand...
Click to collapse
I just flash su beta 2.67 every time i flash a rom , i think bootloader stay on it cuz i'm using right now 5.1.1 with new BL
I Need A help
I am Downloading it and will test soon,
I have d6653 model
I tried cm13 but I coudnt boot,
I used the given recovery
I am using 5.1.1 ressurstion
Will it work on my model?
I am confused in z3 or leo?
which one is Mine?
Thank You
aliw32619 said:
I just flash su beta 2.67 every time i flash a rom , i think bootloader stay on it cuz i'm using right now 5.1.1 with new BL
Click to expand...
Click to collapse
You try with this one ? I've flash V2.65 and nothing
Yep the BL stay in place
Skyllery said:
You try with this one ? I've flash V2.65 and nothing
Yep the BL stay in place
Click to expand...
Click to collapse
Try to flash 2.52 if nothing happened then stable 2.49
aliw32619 said:
Try to flash 2.52 if nothing happened then stable 2.49
Click to expand...
Click to collapse
With v2.52 it works
Skyllery said:
With v2.52 it works
Click to expand...
Click to collapse
Great
Guys Plz Help Me Tooo
I Am New With Z3
happy3777 said:
Guys Plz Help Me Tooo
I Am New With Z3
Click to expand...
Click to collapse
If you're new remind this ROM is still in BETA
Instructions :
You need unlock bootloader
D6653 is the same phone as D6603
Z3 = leo it's his name code
By default use Z3 instead of leo
BTW I think the update script is for Z3 and leo so use the recovery you want [just download New BL if you had install the new bootloader (previous installed build .200 or .264)]
Download the good one
Boot into bootloader/fastboot
fastboot the recovery (fastboot flash recovery filename.img)
reboot into recovery (Power and vol - many times in old BL / Power + Vol - holding when vibrate release Power when Sony screen release Vol - for New BL)
Wipe
Flash Rom
Optional : Flash SuperSu/Gapps
Reboot
Edit : I'm stupid ..I think I flashed a Recovery for Old BL I'm on new one .. Too many recovery in my adb folder. Trying again ..
Edit 2 : Screen backlight still crash, or maybe less.. I'm the only one with this bug ?
Edit 3 : NFC don't work but sometimes a bit buggy
Hi, I´m using this ROM 4 days and there are two problemas, the firts is with led notifications, in apps like Telegram or Whatsapp when I choose a colour like blue, in the led appear in yellow, dont make sense and the second problem is very unstable bc sametimes the mobile phone reboot with no reason.
Btw, I think is the better ROM now for Xperia Z3, ty for your work
juanqui008 said:
Hi, I´m using this ROM 4 days and there are two problemas, the firts is with led notifications, in apps like Telegram or Whatsapp when I choose a colour like blue, in the led appear in yellow, dont make sense and the second problem is very unstable bc sametimes the mobile phone reboot with no reason.
Btw, I think is the better ROM now for Xperia Z3, ty for your work
Click to expand...
Click to collapse
You don't have glitches on screen or the screen randomly turn off ?
How do you install the ROM ? Old or New Bootloader ?
Skyllery said:
You don't have glitches on screen or the screen randomly turn off ?
How do you install the ROM ? Old or New Bootloader ?
Click to expand...
Click to collapse
the kernel has issues with brightness atm. its being fixed.
try one of the older builds, but probably LTE wont work
regards.
infected_ said:
the kernel has issues with brightness atm. its being fixed.
try one of the older builds, but probably LTE wont work
regards.
Click to expand...
Click to collapse
Thanks, I will wait this to be fixed.
Skyllery said:
You don't have glitches on screen or the screen randomly turn off ?
How do you install the ROM ? Old or New Bootloader ?
Click to expand...
Click to collapse
I install the ROM with the new bootloader and yes, i using twitter or any app and randomly the screen freeze and 5 seconds later the mobile phone reboot, and this happen to me 5 or 6 times
I'm confused, what is this "new bootloader" people keep referring to. Do i have new or old bootloader, how can i find out?
Running Zyxx 6.0, hoping for a stable MM AOSP build for Z3 so i can switch
TapioH said:
I'm confused, what is this "new bootloader" people keep referring to. Do i have new or old bootloader, how can i find out?
Running Zyxx 6.0, hoping for a stable MM AOSP build for Z3 so i can switch
Click to expand...
Click to collapse
With new bootloader the recovery has his own partition so now recovery can be built without Kernel like all the other phones.
CrDroid for exemple working only on NewBootloader as you can read it here : https://plus.google.com/112116692753844849623/posts/Sa75Edq6tSU
For install the New BL you need (with an Unlocked Bootloader) to flash build .200 with EMMA (Sony Flashtool)
Download tuto : http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
Tuto : http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
or by flashing .264 like said in G+ post.
I used EMMA (61Mb) which will need to download .200 (1.5Gb) when you will connect your phone
Hmm i had .264 before zyxx. I used flashing software on computer to install.
So im on new bl?
LineageOS for Z4 Tablet wifi and LTE versions (SGP712/SGP771), official !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty may be voided.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Informations
This rom is based on stock kernel and device trees made from scratch. It’s not based on the sonyxperiadev project.
Know issues
Preview problem when taking photos with the default app (alternatives as opencamera don’t have this problem)
How to install
From stock rom:
Update your firmware to the last Nougat version (needed to update the bootloader for new recovery)
Unlock your bootloader (you should save your TA partition before)
Install TWRP (link below)
Make a backup, your data partition will be erased!
Push the rom's zip to the SD card (optionally with gapps)
Wipe System, Data, Cache, Dalvik cache
Install the rom (+/- gapps)
Reboot
Enjoy !
From custom rom (CyanogenMod 13 or ResurrectionRemix-M):
Use flashtool with the lightened ftf below to update bootloader (only if you never updated to stock Android N. Be CAREFULL with flashtool, search correctly before use)
Flash the new TWRP (link below)
Make a backup, your data partition will be erased!
Push the rom’s zip to the SD card (optionally with gapps)
Wipe System, Data, Cache, Dalvik cache
install the rom (+/- gapps)
Reboot
Enjoy !
Tips
To use usb otg, just click on the “USB OTG” button in quick settings, this will enable the detection of usb devices for 30 seconds.
To boot into the new recovery you can press the vol- and power button at the same time with the tablet powered off. The touchscreen in recovery could make two or three seconds to works, don’t worry, it’s normal.
Thanks
kali-, olivier, Myself5, Quarx, cdesai, banmeifyouwant. They bring this amazing project to life for Z4 and Z5 (and by extension to all the kitakami platform).
kali- was also the first one to bring this project to Z4 tablet WIFI, while I did for Z4 tablet LTE.
Downloads
Rom
- Z4 tablet wifi only (SGP712)
- Z4 tablet LTE (SGP771)
TWRP
- Z4 tablet wifi only (SGP712)
- Z4 tablet LTE (SGP771)
Lightened ftf (update bootloader):
- Z4 tablet wifi only (SGP712)
- Z4 tablet LTE (SGP771)
Sources
[url]https://github.com/LineageOS[/URL]
[url]https://github.com/LineageOS/android_device_sony_karin_windy[/URL]
[url]https://github.com/LineageOS/android_device_sony_karin[/URL]
[url]https://github.com/LineageOS/android_device_sony_kitakami-common[/URL]
[url]https://github.com/LineageOS/android_kernel_sony_msm8994[/URL]
Images
XDA:DevDB Information
[ROM][7.1.2]LineageOS Z4Tablet[SGP712/771], ROM for the Sony Xperia Z4 Tablet
Contributors
andralex8, kali-, Devs who worked on kitakami platform (ivy, suzuran, ...): olivier, Myself5, Quarx, cdesai, banmeifyouwant, ...
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Nougat
Based On: LineageOS
Version Information
Status: Stable/Official
Created 2017-05-17
Last Updated 2017-11-20
Thank you very much for this rom.
Hello,
Thanks for releasing, I've flashed your new build and the WideVine DRM is working fine now. Good luck with getting the commits merged, hope this makes it to official status after your work to fix the last few broken items.
Anything left to fix at this stage? I see the camera is more or less fine, just a little perspective distortion in the camera app due to the preview window having the wrong dimensions which is very minor.
Thanks!
Why developer setting has only root for adb?
Have i must flash supersu in twrp?
Thank you very much for this rom.
@[email protected]
Please, look and read at -
http://www.cyanogenmods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/
There you can find all Informations.
I have download the ZIP File and flashed the arm 64 SU and become a new ROOT-Assortment / Selections. And now i have FULL-Root.
By me works it very good. I have tested any APP´s what are must have "root", no Problem´s.
A very great Thank´s to "andralex8" and the other Developers for his good Job.
Into the Moment i´am so Happy with my new - "LINEAGE OS".
I like it´s.
yes i just notice that. I install SR3-SuperSU-v2.79-SR3-20170114223742 and it works great..
I am happy to see that rom can be themed by substratum...
[email protected] said:
Why developer setting has only root for adb?
Have i must flash supersu in twrp?
Thank you very much for this rom.
Click to expand...
Click to collapse
Read the lineage os blog post. Root is now an optional add-on so that users can use root-aware apps without installing root-cloaking software. Not difficult to install, just use arm64 from here: https://download.lineageos.org/extras
TWRP updated to 3.1.1-0
Can't install this package over newer build
andralex8 said:
TWRP updated to 3.1.1-0
Click to expand...
Click to collapse
lineage-14.1-20170517-UNOFFICIAL-karin.zip wont install with this recovery.
"Can't install this package over newer build" is the error message.
Can you upload a later dated rom or should I go back to the earlier TWRP?
human_blip said:
lineage-14.1-20170517-UNOFFICIAL-karin.zip wont install with this recovery.
"Can't install this package over newer build" is the error message.
Can you upload a later dated rom or should I go back to the earlier TWRP?
Click to expand...
Click to collapse
This can be fixed by removing first line of the updater script.
Simply download the rom for your version, use you preferred zip tool to edit the file: META-INF/com/google/android/updater-script and remove the first line.
Thank you for the rom. At last it was released publlicaly. Everything works like a charm. Only mifare cards and stock lineage camera could be a little issue.
I've read where many users who have updated from Marshmallow to Nougat have experienced fast battery drain issues. Can anyone confirm this is not an issue with this ROM or that it has been resolved with 7.1.2?
Jadog said:
I've read where many users who have updated from Marshmallow to Nougat have experienced fast battery drain issues. Can anyone confirm this is not an issue with this ROM or that it has been resolved with 7.1.2?
Click to expand...
Click to collapse
No difference for me and I've been running nougat for a few months.
human_blip said:
lineage-14.1-20170517-UNOFFICIAL-karin.zip wont install with this recovery.
"Can't install this package over newer build" is the error message.
Can you upload a later dated rom or should I go back to the earlier TWRP?
Click to expand...
Click to collapse
I should build a new version soon.
But in all cases you can also wipe ONLY the system partition before reinstalling the rom (I do it each time, even if not mandatory it's cleaner). You let your data partition unchanged so you will not loose anything.
Ok, so I'm ready to pull the trigger on this, but I have a few questions to be sure I do it correctly. I currently have a rooted Z4 with the custom AndroPlus kernel (it's on lollipop v6.x). So no custom rom, only custom kernel with root. So to follow this guide, I would use the flashtool with the lightened ftf, and flash the new TWRP and ROM, right? Or would it be better to just restore my tablet back to original factory state and then proceed from the beginning?
Jadog said:
Ok, so I'm ready to pull the trigger on this, but I have a few questions to be sure I do it correctly. I currently have a rooted Z4 with the custom AndroPlus kernel (it's on lollipop v6.x). So no custom rom, only custom kernel with root. So to follow this guide, I would use the flashtool with the lightened ftf, and flash the new TWRP and ROM, right? Or would it be better to just restore my tablet back to original factory state and then proceed from the beginning?
Click to expand...
Click to collapse
You need lightened ftp in case you have android 5/6 as twrp dosent work with old bootloader. If you have any version of noogat stock. No need of ftp. Also, it might be flashed trough androplus recovery.
Perfect, thank you. Also, right now on AndroPlus I have the DRM Fix that emulates the DRM keys to allow for Sony's Image Enhancement. Will I loose that with this ROM?
Jadog said:
Perfect, thank you. Also, right now on AndroPlus I have the DRM Fix that emulates the DRM keys to allow for Sony's Image Enhancement. Will I loose that with this ROM?
Click to expand...
Click to collapse
Lineage dosent need any drm fix. It's only stock feature.
the rom i was waiting for. much better battery, especially in standby. i use the tablet only on special days
and till this day it loses 3% per day (using leandroid for flightmode while display is off).
with stock nougat i lost 10% per day.
alex009988 said:
Lineage dosent need any drm fix. It's only stock feature.
Click to expand...
Click to collapse
Well that's even better! Seems like the perfect solution. And from what I understand I can get full root by installing SuperSU from here using the ARM64 version and installing via TWRP?
Am I required to have an OTG cable and attach a mouse to make any of this work? Or can it be done without? Thanks for the excellent support!