Related
Hi all 1st post here and it's already a question so I apologize, , I am pretty new this stuff and recently started messing with my firmware and having a play around. Now the issue I have is I cannot connect the phone to pc by usb at all. I have tried all the usual methods of switching data cables, hard reset, enabled/disabled debugging. The only thing that it does is charge the phone.
On a seperate note, I think my current version of android is corrupt as when i hold down the power button, the only option I get is power off, various other things are not quite right either and would prefer stock to this. The device is rooted using universal androot. If anyone could help me return to stock or change my firmware would be greatly appreciated. Please bare in mind that I am unable to use usb, so kies and odin are just not an option. Many thanks
the information i have is.
PDA: - I5500LUYJP2
PHONE - I5500LUYJP2
CSC: - I5500LAROJP2
The kernal version says
2.6.32.9-perf
tyoon hwang SEP-04 #2
Running 2.2 android
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Many thanks for the reply, I was a little naive and just downloaded a random linked one Am I able to put the madteams on there just from sdcard?
If you mean install it from sdcard using clockworkmod?
Use this one : http://www.madteam.co/forum/development/(re-release)-motafoca-froyo-2-0-9-rom-clockworkmod-edition/
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
I don't even get the dialog to connect by kies or mass storage. I plug my phone in and the only thing it does is charge. The computer doesn't even acknowledge there is a device connected, with that in mind i'm certain it is a problem with my phone. Possibly firmware related, or faulty usb phone port I would guess.
Which is why I really hope someone can come along and help with my previous problem of fixing things with sdcard only.
Shady27 said:
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
Click to expand...
Click to collapse
Jordanooo said:
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Click to expand...
Click to collapse
if you're wanting to use odin to flash, use that rom i said. download both files from the 'full edition' and extract them
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
to flash:
1. download kies
2. download odin
3. download your files for the rom
4. put them all into odin
5. turn phone into download mode and connect to pc
6. wait for it to show up on odin
IF, your phone doesnt show up, try uninstalling kies, re-installing it, restarting your computer and try again
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Should be a rom.problem..flash other rom..if odin shows yellow light below com port in odin it means you are ready to go..flash another rom and see if it helps..but if yellow light doesnt display theb its data cable prob or usb port prob..
Sent from my GT-I5500 using Tapatalk
Shady27 said:
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Click to expand...
Click to collapse
So you already have clockworkmod installed?
Jordanooo said:
So you already have clockworkmod installed?
Click to expand...
Click to collapse
I used universal androot and I used an app called 'rom manager' which says it installs clockworkmod recovery. i havnt ever used odin to install.
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Jordanooo said:
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Click to expand...
Click to collapse
It may not have installed correctly which is how I managed to ruin my phone, but according to rom manager it did install I never got the chance to check tho as my phone is now dead and hoping to get it fixed under warranty.
you probably installed a version for another phone. If you can, boot your phone into download mode and install clockworkmod found here: http://www.madteam.co/forum/development/(development)-ltsecret-projectgt/
Then, hopefully your phone should be ok, but just to be sure, install the latest cyanogenmod (using clockworkmod).
Hope this helps
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
sry for the fast answer i didn't read correctly,
i just edited this for those who dont know what im talking about,
did you try to flash to stock, your not using a stock rom as i can see in the picture
cabloomi said:
I'M NOT HOLD RESPONSAPBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE
BY FOLLOWING THIS GUIDE YOU AGREE TO THE TERMS
HERE THESE ARE STOCK ROMS, WHAT YOUR USING IS NOT EVEN FLASH ABLE VIA ODIN (I THINK)
1. DOWNLOAD OLD BOOTLOADER
2. FLASH OLD BOOT LOADER BY
1. OPEN ODIN
2. CLICK BOOTLOADER BUTTON AND CHOOSE THE RECENTLY DOWNLOADED BOOTLOADER
3. TICK PHONE BOOTLOADER UPDATE
4. THEN CLICK START
>>>>PROBLEM SOLVED<<<<
Click to expand...
Click to collapse
Dude... he has an SII HD LTE. (E120L) Which has different CPU/SoC/GPU than the I9100.
I am about 95% certain I9100 firmwares will NOT WORK on his phone, and may, in fact, make his situation worse.
---------- Post added at 11:28 AM ---------- Previous post was at 11:15 AM ----------
vdbergh said:
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
Click to expand...
Click to collapse
First off, do NOT follow that guy's advice above, unless you want to brick your phone.
Second, try reading/searching this thread. I myself did a quick perusal of it and found that someone in it mentioned that they were able to root their E120L or S by flashing Tegrak kernel. Search around for it.
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
ctomgee said:
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
Click to expand...
Click to collapse
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
vdbergh said:
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
Click to expand...
Click to collapse
I would get the latest firmware available via CheckFUS. (if you don't know what that is, just google it) Then flash it via Odin. Let's start there.
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
cabloomi said:
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
Click to expand...
Click to collapse
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
vdbergh said:
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
Click to expand...
Click to collapse
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
ctomgee said:
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
Click to expand...
Click to collapse
Thanks for your help ctomgee, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
vdbergh said:
Thanks for your help cabloomi, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
Click to expand...
Click to collapse
Please don't get me mixed up with cabloomi...
Thanks for your help, Ctomgee...
The problem that I couln't enter download mode or root my phone is solved with your help.
I still have a probem with the radio/basebad, but I'll post that in another thread.
Updating SuperSU app as suggested through CWM by clicking link on the app. Phone rebooted and stuck at "Samsung". Cannot get into recovery (Power and Vol */- ). Can get into Download to but my SG2 hasn't been able to connect to a PC for a long long time (yeah, switched ports, batteries, cables, and PC's). Doesn't appear that phone wants to charge either. Usually when turned off during charging the battery is partially green and below the battery the dots light up. Now when off and charging battery is gray and rotation swirl doesn't swirl....frozen too. Phone was working without any problems prior to updating the binary (other than not connecting to PC).
Any suggestion appreciated.
SG2 SHH-I777
Rooted with Framaroot
SHOstock3
The remedy is to flash stock and start over. If you have a bad usb port in the phone, then you probably need to replace that and get usb working so you can flash from Odin. Or send it to a reliable repair shop like Mobile Tech Videos.
I have read a few posts that associate Framaroot and loosing PC connection/usb mass storage on the I77. Any insight on that?
318mph4me said:
I have read a few posts that associate Framaroot and loosing PC connection/usb mass storage on the I77. Any insight on that?
Click to expand...
Click to collapse
I havn't seen anything about that. Have you read anything about how to fix it? Is this issue supposed to affect hardware or firmware?
Anyway, this should have nothing to do with whether Odin will see your phone. Have you tried to enter download mode with Odin open on the desktop? You need to have "USB driver for Samsung Phones" installed on the pc in order for Odin to recognize the phone when you enter Download mode.
The Framaroot developer responds to this question. I don't understand the inference but maybe you can simplify it for me.
http://forum.xda-developers.com/showthread.php?p=43507992#post43507992
You have brought up the changes in firmware since 4.0 to system property /data/property/persist.sys.usb.config. I needed to fix the string but didn't know how. Was on to do list.....procrastination killed my phone.....bummer.
http://forum.xda-developers.com/showthread.php?t=2488186
And I can't find the other thread with the post about loosing usb with Framaroot but you gave a thumbs up in this thread (not the specific post). The topic was Framaroot and you were recommending using the apk.
Also, another I777 had the same problem (bootloop) with the SU update( #4327)
http://forum.xda-developers.com/showthread.php?t=1538053&page=433
By the way, if I can get a computer, ODIN, usb cable and my phone to cooperate, what firmware you recommend I download?
Thanks for your time
318mph4me said:
By the way, if I can get a computer, ODIN, usb cable and my phone to cooperate, what firmware you recommend I download?
Thanks for your time
Click to expand...
Click to collapse
I'd suggest you flash back to the latest stock, ucmd8, unless you are reluctant to use framaroot. Otherwise you could use the stock UCLL6, 4.0.4 plus root package. See the links in my signature. I assume you want something rooted so you can use Mobile Odin to install a custom kernel with CWM recovery, and then flash the firmware of your choice.
I looked at those links, but I didn't find the developer's response. Not enough information to respond to, but interesting to know.
As far as /data/property/persist.sys.usb.config, that is a text file. As long as you have root access, you just open it in a text editor and change the text string, then save the file and reboot.