DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
I introduce you Cyanogenmod 12.1 for F400S/K/L (Korean G3 variants)
Changelog
- 15/08/25: Device name has changed (F400K → F400)
- 15/04/23: Initial CM12.1 build
Working
- Everyting.
Not Working
- None for now (Please report).
Attention:
- F400L data connection confirmed, but not fully tested.
- If you need specific model name for your device (F400S/K/L), please change model name in build.prop into yours using root explorer or something equivalent.
- SELinux mode set to permissive. If you want enforcing, then use selinux mod changer
- May suffer Google Sync problem (chrome, calendar, etc..), but not sure if it's problem of ROM or GApps. Please Report.
Requirements
- Working TWRP (Download from Here or v2.8.7.0)
Installation
- Reboot into recovery.
- Backup your current rom.
- Wipe System/Data/Cache partition.
- Flash Rom.
- (Optional) Flash lollipop baseband for your device.
- Flash GApps and SuperSU.
- Reboot and Enjoy!
Download
ROM
Baseband for F400K (v20l)
Preferred GApps: TK GApps Pico
Older Version
15/04/23
Baseband for F400K (v20f)
Baseband for F400K (v20g)
If you like the post, it would be great for pressing the donate to me button!
At last .
Great work dev. Going to give a tay as soon as possible
Awsome
Sent from my LG-F400K using XDA Free mobile app
Work great with F400L, fully working. Need more time to test
No update?
Sent from my LG-F400S using Tapatalk
Hello,
Do OTA update work on newest release?
Related
Rian S.S | @rssxda:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
AICP is has been based on Lineage, Slim, Omni and Original AICP ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
INSTALLATION INSTRUCTIONS
- Download the latest build of AICP
- Download Gapps
- Take a Nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using TWRP
- Flash Gapps
- Reboot.
- Enjoy!
DOWNLOADS
ROM - Here
GApps - Here
SOURCES
Tree - Here
Kernel - Here
Vendor - Here
What works
Code:
RIL (dual sim, volte)
WIFI
Tethering
Camera
Bluetooth
Sensors
MTP
Sound
Fingerprint
- - SELinux: enforcing
-----
Bugs: Moto Actions
Version Information
Status: beta
Current Stable Version: Nougat
Created 2018-06-25
Rom TOP
ROM top pity that the Moto Actions does not work
images?
doesn´t work, it boots to the recovery
Is this rom comaptible with XT1799-2?
Lineage 17 treble gsi TEST ROM
Project ended.
Warning! Test ROM obsoloted, but don't remove download link.
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Bugs:
No camera
No flashlight
Android quota removed. (Easy back 7.x ROMs)
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Boot into recovery
Wipe system, data, cust, cache partitions
Flash Lineage Unofficial Test Rom (sideload or copy SD)
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.)
First boot may take up to 1-3 minutes.
TEST ROM Obsoloted, use this link:
4PDA
(Simple ROM installer here: LINK )
Working camera and flashlight.THANK YOU ZFreeX, 4PDA!
TEST ROM Download OBSOLOTED!!! Don't download, unnecessary.
Optional Download my TWRP
ROM OS Version: 10.x Q
ROM Kernel: Linux 3.x
Version Information
Status: Test
Created 2019-11-23
Last Updated 2019-11-23
Screenshoots
szanalmas said:
Lineage 17 treble gsi TEST ROM
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Bugs:
No camera
No flashlight
Android quota removed. (Easy back 7.x ROMs)
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Boot into recovery
Wipe system, data, cust, cache partitions
Flash Lineage Unofficial Test Rom (sideload or copy SD)
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.)
First boot may take up to 1-3 minutes.
ROM Download
Optional Download my TWRP
ROM OS Version: 10.x Q
ROM Kernel: Linux 3.x
Version Information
Status: Test
Created 2019-11-23
Last Updated 2019-11-13
Screenshoots
Click to expand...
Click to collapse
Gib me ur telegram account, want ask some question xD
Mind joining ugglite tester group? Maybe we can discuss there, here @Ugglitetester
Result test
First In flash I see lineage 17 gsi have bug camera and flashlight :
fix from phhusson in thread lineage 17 gsi :
1) Find /system/etc/ld.config.XX.txt (where XX is the SDK version your vendor corresponds to - e.g. 8.1 vendor is SDK 27)
2) Find the line "namespace.vndk.links = system,default"
3) Append ",runtime" to the end of it, so it becomes "namespace.vndk.links = system,default,runtime"
4) Save and reboot
Thanks to all who brought up the issue and @phhusson for quickly identifying the cause / giving a fix!
after apply Fix I see its not fixed in this ugglite ...
log error is : 3396 W CameraBase: CameraService not published, waiting... 11-23 22:39:18.246 3396 3396 I ServiceManager: Waiting for service 'media.camera' on '/dev/binder'... 11-23 22:39:18.340 611 611 I chatty : uid=1047(cameraserver) /system/bin/cameraserver expire 22 lines
always error media.camera in dev/binder
Also flashed other gsi v204 base phh for see ( havoc) , error is same and log issue is same
good news all rom pie ugglite have in fpc screen : bug brithness screen , I see its fixed here :laugh:
but dt2w no work here
szanalmas said:
Lineage 17 treble gsi TEST ROM
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Bugs:
No camera
No flashlight
Android quota removed. (Easy back 7.x ROMs)
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Boot into recovery
Wipe system, data, cust, cache partitions
Flash Lineage Unofficial Test Rom (sideload or copy SD)
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.)
First boot may take up to 1-3 minutes.
ROM Download
Optional Download my TWRP
ROM OS Version: 10.x Q
ROM Kernel: Linux 3.x
Version Information
Status: Test
Created 2019-11-23
Last Updated 2019-11-23
Screenshoots
Click to expand...
Click to collapse
Delete thread if no need test anymore
your previous test is better ! this update have fixed camera but its no gsi its riva port rom ! its have added bug in your fix "camera"
please join our ugglite telegram
viethoang18 said:
please join our ugglite telegram
Click to expand...
Click to collapse
Sorry, I keep fixing bugs, I have only one phone that often changes system. I don't use telegram. (more now)
Thanks.
szanalmas said:
Sorry, I keep fixing bugs, I have only one phone that often changes system. I don't use telegram. (more now)
Thanks.
Click to expand...
Click to collapse
so how can we contact you?
Presenting, iOS-like Custom ROM for Samsung Galaxy Star (mint, mintxx, mint2g, GT-S5280, GT-S5282).
This is based on CM11 and has been modified to look like iOS 6 in some areas, I will do a SystemUI change later but for now enjoy my masterpiece.
This ROM flashable is super tiny (150MB ROM package), and it takes up very little RAM (without Gapps), idles around 240MB used.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
ROM Details:
Based on CM11, Android KitKat
Modified to look like iOS 6 with extra features
iOS boot animation
Boot times:
First Bootup: 2:20
Normal bootup: 0:38
Great for gaming, Minecraft (0.9.0) runs great!
ROM Download:
Beta 1
Bugs:
Video Recording.
Mobile data on one of the SIMs when using dual SIM. (only for GT-S5282)
Installation Instructions:
If you are on stock:
Use Odin and flash an SELinux enabled recovery. Use TWRP or CWM 6.0.5.1.
Download the flashable zip file.
Reboot to recovery.
Wipe data/factory reset.
Wipe cache.
ADB sideload or flash it from your SD card.
Flash Gapps. (Optional)
Reboot and move on to post-install instructions. (Optional)
If you are upgrading from CM11 (Assuming you have a SELinux enabled recovery):
Download the flashable zip file.
Reboot to recovery.
Simply flash the ROM, no need to wipe anything.
Flash Gapps. (Optional)
Reboot.
Post-install instructions:
If you want to use dual SIM, use adb shell and run the following:
Code:
su
setprop persist.radio.multisim.config dsds
reboot
Open the iPhone4S Screen App
Tick the "Enable" option if it haven't been ticked
Disable the lock screen from System Settings
Enjoy!
Credits:
CM:
@Unjustified Dev and @Doc_cheilvenerdi.org - For starting the CM project, initial tress and stuff.
@psych.half - For his fixes in CM10.1, ideas and ofcourse for his kernel. @dreamstar - For his SELinux enabled recovery, without which CM11 was not possible.
@andii_nr - For fixes. @doesntexits and @ngoquang2708 - For their works in SGV, patches and their help. @DigiGoon - For his highly compressed CM11 sources.
@dhinesh77 @pawitp and others - Various fixes and references have been taken from their work.
@corphish - For publishing the ROM
iOS Skin:
Android and Tech Solutions on YouTube - For the idea @MasterC22 - For his iOS bootanimation
https://apk-dl.com/ - For providing the keyboard
Aderen Lim on YouTube - For providing the Music Player
Android Gameplay HD on YouTube - For providing the Calculator
@Mrakoris/ - For his amazing work to keep all the iOS 6 theme apps
Reserved
TipzTeam said:
Presenting, iOS-like Custom ROM for Samsung Galaxy Star (mint, mintxx, mint2g, GT-S5280, GT-S5282).
This is based on CM11 and has been modified to look like iOS 6 in some areas, I will do a SystemUI change later but for now enjoy my masterpiece.
This ROM flashable is super tiny (150MB ROM package), and it takes up very little RAM (without Gapps), idles around 240MB used.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
ROM Details:
Based on CM11, Android KitKat
Modified to look like iOS 6 with extra features
iOS boot animation
Boot times:
First Bootup: 2:20
Normal bootup: 0:38
Great for gaming, Minecraft (0.9.0) runs great!
ROM Download:
Beta 1
Bugs:
Video Recording.
Mobile data on one of the SIMs when using dual SIM. (only for GT-S5282)
Installation Instructions:
If you are on stock:
Use Odin and flash an SELinux enabled recovery. Use TWRP or CWM 6.0.5.1.
Download the flashable zip file.
Reboot to recovery.
Wipe data/factory reset.
Wipe cache.
ADB sideload or flash it from your SD card.
Flash Gapps. (Optional)
Reboot and move on to post-install instructions. (Optional)
If you are upgrading from CM11 (Assuming you have a SELinux enabled recovery):
Download the flashable zip file.
Reboot to recovery.
Simply flash the CM11, no need to wipe anything.
Reboot.
Post-install instructions:
If you want to use dual SIM, use adb shell and run the following:
Code:
su
setprop persist.radio.multisim.config dsds
reboot
Open the iPhone4S Screen App
Tick the "Enable" option if it haven't been ticked
Disable the lock screen from System Settings
Enjoy!
Credits:
CM:
@Unjustified Dev and @Doc_cheilvenerdi.org - For starting the CM project, initial tress and stuff.
@psych.half - For his fixes in CM10.1, ideas and ofcourse for his kernel.
@Dreamstar - For his SELinux enabled recovery, without which CM11 was not possible.
@andii_nr - For fixes.
@doesntexits and @ngoquang2708 - For their works in SGV, patches and their help.
@DigiGoon - For his highly compressed CM11 sources.
@dhinesh77 @pawitp and others - Various fixes and references have been taken from their work.
@corphish - For publishing the ROM
iOS Skin:
Android and Tech Solutions on YouTube - For the idea
@MasterC22 - For his iOS bootanimation
https://apk-dl.com/ - For providing the keyboard
Aderen Lim on YouTube - For providing the Music Player
Android Gameplay HD on YouTube - For providing the Calculator
@Mrakoris/ - For his amazing work to keep all the iOS 6 theme apps
Click to expand...
Click to collapse
IT work fine on my star, kinda lagg at first boot on 2nd boot is fine no lagg, can you put next time microG support and low ram config.
CosToDie said:
IT work fine on my star, kinda lagg at first boot on 2nd boot is fine no lagg, can you put next time microG support and low ram config.
Click to expand...
Click to collapse
Will do later, thanks for that suggestion.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my build for Galaxy Grand 2,
most things are working, enjoy.
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
disabling hw keys
Spoiler: Links
Here you can find my builds for:
Dual Sim (ms013g)
TWRP
ROM Androidfilehost
ROM Mega
I would recommend to use microG instead of gapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][MS013G][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Grand 2
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Version Information
Status: Stable
Created 2022-11-09
Last Updated 2022-11-09
Great rom thank you for support our device
gapps plz , help me
Hi Sim2 Voice is Not Working
Wow, this is insanely impressive. Android 12 running on a 10 year old device. Pretty stable too. hopefully you can make an Android 13 rom too!
Hi Bro, this is very nice.Thanks for your effort. But Sim 2 voice is not working.Others is OK.
Note:
- This was not mine!
Introduction:
- AwakenOS 3.4 is a custom Android ROM that provides a personalized and optimized experience for your device. It offers a clean and smooth UI, enhanced performance, and a wide range of customization options. With regular updates and bug fixes, AwakenOS 3.4 delivers a stable and reliable Android experience
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelogs:
- Initial build
- Fixed UI freezing issue.
- Fixed face unlock
- Fixed fingerprint sensor
- Fixed VoLTE
Notes:
- Vanilla build
- Clean firmware recommended
- January security patch
Installation:
- Boot into recovery.
- Wipe cache, dalvik, and data.
- Backup IMEI and boot.img.
- Flash firmware.
- Reboot.
Install Magisk (optional).
Install Gapps (optional).
Android Version: 13 (Tiramisu)
Linux Kernel Version:
- Linux version 4.9.337
Downloads:
Sourceforge
Credits:
- danya227
- Atul(sourceforge)
Links:
The rom's Kernel source
THe kernel I was using:
EDIT MODERATION : I am sorry to inform you that unfortunately you cannot link to a thread closed for GPL infringement.
INFO MODERATION
Thread closed because no maintenance was provided following the closure of the member's account.
If a member wishes to continue maintaining this thread, click on the "Report" button. Thank you.