Q&A for [ROOT] Rooting Method for Alcatel Pop C2 4032A
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT] Rooting Method for Alcatel Pop C2 4032A. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
kirito9 said:
This is a guide on rooting the Alcatel Pop C2 4032A using 2 methods.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
How to Root using the Framaroot method:
Enable unknown sources from settings to allow installation of third party apps.
Download latest framaroot.apk version from here .
Install framaroot and click on the Barahir root exploit.
Reboot device and enjoy root .
How to Root using the recovery method
Requirements
SP flash tools
Mtk VCOM drivers (preloader drivers)
ADB driver
USB Cable
Mtk6572 Scatter
Recovery of your choice
SuperSu zip
Android phone of course
Working brain
Download the SP flash tools and Mtk VCOM drivers and extract them to desktop.
Install the Mtk VCOM drivers.
Download the scatter file and place also on the desktop.
Download the SuperSu.zip and place it on the sdcard or internal storage.
Download the recovery of your choice and place it on your desktop
Open the folder with SP flash tools and run flash_tool as administrator
Select the scatter file by clicking on scatter loading
Check the recovery check box and click on location and select the recovery of your choice.
Turn off your phone.
Connect the usb cable to the computer but don't connect the phone as yet.
Click on the download button on the SP flash tool and then connect your phone to the computer.
Wait for it to flash and then reboot into recovery using adb commands once the phone has booted up.
Once the phone is in recovery select install zip from sdcard and locate the SuperSU.zip.
Reboot and there you go root access
To Enable USB Debugging.
1. Go to settings and about phone
2. Tap the build number 7 times to enable development mode.
3. Go back and then go in development mode.
4. Enable USB debugging.
Click to expand...
Click to collapse
Hello there thanks for this guide, is there any chance that this will damage my phone. Noob here
yes there is a possibility of this damaging your phone but read the disclaimer and follow instructions and you will never go wrong
Sent from my 4032A using XDA Free mobile app
Related
[Q&A] [Root/Guide] How to Root/Install TWRP Touch Recovery for Digiland DL701Q 7&quo
Q&A for [Root/Guide] How to Root/Install TWRP Touch Recovery for Digiland DL701Q 7" Tablet
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Root/Guide] How to Root/Install TWRP Touch Recovery for Digiland DL701Q 7" Tablet. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
My TWRP installation is getting aborted
I get an error message that says "Aborting, an error has been detected, cannot repack recovery..."
Device is updated and rooted; booted up normally. Tried to run in fastboot mode but the computer does not detect it. In the device manager, the device appears as "Android Composite ADB Interface". Please can you help.
aybhagwat said:
I get an error message that says "Aborting, an error has been detected, cannot repack recovery..."
Device is updated and rooted; booted up normally. Tried to run in fastboot mode but the computer does not detect it. In the device manager, the device appears as "Android Composite ADB Interface". Please can you help.
Click to expand...
Click to collapse
Please remove and re install your device drivers on your PC, delete the txt file and folders from the TWRP file, (not the executable). Reboot your tablet normally, connect to the PC and run the program automatically, you should get an install, but the orientation will be incorrect. Simply reboot your tablet again and reconnect, this time run the TWRP program following the steps for manual mode.
Been trying to install TWRP and keep getting a not compatible device error. When connecting the tablet, HTC Dream drivers get installed, I have removed drivers, forced installed android ADB drivers rebooted pc and tablet still nothing.
Any thoughts?
IamNWar said:
Been trying to install TWRP and keep getting a not compatible device error. When connecting the tablet, HTC Dream drivers get installed, I have removed drivers, forced installed android ADB drivers rebooted pc and tablet still nothing.
Any thoughts?
Click to expand...
Click to collapse
For the DL701Q Tablet, please confirm that you have downloaded the TWRP installer that is compatible with MTK devices with UBIFS system,
Protocol 9 said:
For the DL701Q Tablet, please confirm that you have downloaded the TWRP installer that is compatible with MTK devices with UBIFS system,
Click to expand...
Click to collapse
Using the 2.8.2.0 file listed in the how to page linked above.
Also that is the odd thing, It is saying the tablet is not a MTK device but when I pull up the hardware specs it is MediaTek MTK8127
Not sure why the installer isn't detecting your tablet correctly. Are you using the ubifs version. I will send you the zip file of the one I used.
Sent from my DL701Q using Tapatalk
I am using the 2.8.2.0 twrp software on windows 8. I have root by using iroot and have chain fire's supersu working. I can't get the computer to see the tablet using the twrp software. The device manager shows the tablet as dl701q. Any clarification on what drivers I am supposed to use would be great.
slushbilly said:
I am using the 2.8.2.0 twrp software on windows 8. I have root by using iroot and have chain fire's supersu working. I can't get the computer to see the tablet using the twrp software. The device manager shows the tablet as dl701q. Any clarification on what drivers I am supposed to use would be great.
Click to expand...
Click to collapse
You will need normal and recovery drivers for sure. To get recovery driver, power off tablet, hold volume button closest to power button; press and hold power button simultaneously. Should get you to bootloader to select recovery and connect to pc. I should say though that I am running windows 7 not 8.
Sent from my Nexus One using Tapatalk
what version of easy magic twrp is supposed to work with the dl701q? Thanks.
2.8.2 for UBIFS system.
Here is the Stock Rom for Micromax Funbook P310.
*But Flash this at your own risk. I have no guarantee that it might work.
You are solemnly responsible for anything that happens to your device because of this process.*
Here is the Link:
http://www.mediafire.com/download/f44vb7sexcxbyz5/Micromax-P310-V1-30-04-14-29-04-14-Firmware.zip
Link for SP Flash Tools:
http://www.mediafire.com/download/5f5h3owa7s7y6g2/SP-Flash-Tool-v5.1352.01.zip
Use this Guide to Flash it.
Link to Guide:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
Hit Thanks if Helped.
How to Flash CWM Recovery
Needed Tool
Mtk Droid Tools- http://www.filefactory.com/file/aqhiqdsuhd3/Download MTK Droid Root & Tools v2.5.3.rar
*But Flash this at your own risk. I have no guarantee that it might work.
You are solemnly responsible for anything that happens to your device because of this process.*
Your device must be rooted to do this.
Follow this video, it supports Funbook P310. But install drivers and enable USB Debugging.
https://www.youtube.com/watch?v=4Yan4_bVRuA
Steps to install CWM
Step 1 : Extract Mtk Droid Tools.
Step 2 : Open Android Symboled MTK Droid tools.
Step 3 : Connect your device with USB Debugging On. To turn on USB Debugging Goto Settings-Developer Options(Switch it to On) -Check USB Debugging.
Before this If you want to return back to Stock Recovery, make a full Nandroid Backup using Online Nandroid Backup*Root from Play Store
Step 4 : If you see a Root Button in Right-Bottomed corner, Press it.(If you don't see it,then check that a greeen is there in a box in left-bottomed corner near your
devices name.
Step 5 : It will display the devices Information in left Phone information menu, Select root,backup,recovery menu.
Step 6 : In that select to use boot from Phone and press Recovery and Boot.
Step 7 : Give yes to next two dialog boxes that appear after this.
Now CWM is Installed.
Hit Thanks if helped .
Here is the Stock Recovery
*But Flash this at your own risk. I have no guarantee that it might work.
You are solemnly responsible for anything that happens to your device because of this process.*
Link:
https://drive.google.com/file/d/0B84mrcgFOztXY1JHaGJuMm1tUDQ/view?usp=sharing
Hit Thanks if helped .
Q&A for Micromax Canvas Power A96 | Rooting | CWM Recovery | MT6582M
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Micromax Canvas Power A96 | Rooting | CWM Recovery | MT6582M. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
u r awesome bro
thanku soo much bro....i was w8ng for the cwm from more than 8 months....
---------- Post added at 12:19 PM ---------- Previous post was at 12:15 PM ----------
i was w8ng for cwm from more thn 8 months .........thanku bro.....
vaibhavbain said:
thanku soo much bro....i was w8ng for the cwm from more than 8 months....
---------- Post added at 12:19 PM ---------- Previous post was at 12:15 PM ----------
i was w8ng for cwm from more thn 8 months .........thanku bro.....
Click to expand...
Click to collapse
I don't have the device with me. Otherwise, i should have tried to port some custom roms too
Sent from my Micromax A106 using XDA Premium 4 mobile app
rooting micromax canvas a96 power is very simple
first install iroot.exe into the pc
next connect ur phone to pc by usb debugging mode
now open iroot application and wait untill ur device detected in the application and click root button and wait for success msg
in this process some china applications are installed in ur phone so uninstall them after the rooting process is done and be sure ur phone battery should above 40%
dont disconnect ur phone during this process
---------- Post added at 07:51 AM ---------- Previous post was at 07:38 AM ----------
A MediaTek android device (MT65XX) Auto Insurance
Your phone must be rooted already. How to Root
USB Chord. Auto Insurance
Windows PC/Laptop.
Download ADB Drivers : Auto Insurance
ADB Drivers. Auto Insurance
Link 2 : ADB Drivers.
Download MTK Droid Tools for Windows : Auto Insurance
MTK Droid Tools for Windows.
MTK Droid Tools for Windows.
How To Flash ClockworkMod (CWM) Recovery on Any MediaTek (MT65xx) Android Device :
1. Download necessary files from above links.
2. Install the downloaded PDANet to your computer. It contains ADB Drivers.
3. Turn on your android device and connect it to your computer using USB Chord. (Make sure to Enable USB Debugging, go to Phone Settings -- Developer Options -- Enable USB Debugging.)
4. From your computer, open MTK Droid Tools that you have downloaded above and extract it to your desired location.
5. Open MTK Droid Tools.exe from the extracted folder (Run as administrator). Wait for the tool to detect your device. (If UBIFS warning appeared in the status message, this process will not work for you. Only ext4 supported.). Notice on the bottom-left part of the tool, a YELLOW color indicator means that your android device is does not have root shell yet. If it is GREEN already, proceed to step 7. Click here to know how to ROOT your Mediatek Device or proceed to Step 6
6. Click ROOT button to enable root shell your device. Wait for the progress bar on the Status, see your phone to Grant Superuser access. If the color indicator turns GREEN, then you have successfully enabled root shell for your device. Auto Insurance
7. Now, select the Root, Backup, Recovery tab and and further choose To Use Boot From Phone from the selections. Click Recovery and Boot, a message prompt will appear "To make CWM recovery automatically", click YES. Auto Insurance
8. Wait for the tool to build the CWM recovery and another prompt will appear "install patched boot to phone?" select NO, wait a little bit more and another prompt will appear again "install created recovery to phone", now select YES.Auto Insurance
9. When the tool ask you to reboot your phone to recovery, click Yes and it will reboot to CWM recovery shortly. Check out your new custom recovery.Auto Insurance
Congratulations! You now have ClockworkMod custom recovery on your MediaTek android device. You can now enjoy apps that requires Superuser rights, mods and ROMs that requires flashing from CWM. Checkout ROMS collection of our blog. Auto Insurance
I hope this article helped you in Installing CWM on your Mediatek device. Queries & Suggestions are welcome in comment section. Do Like & Share this post. Thank You !
wooooow awosome !!!
it really worked thanks guys
kiran king said:
rooting micromax canvas a96 power is very simple
first install iroot.exe into the pc
next connect ur phone to pc by usb debugging mode
now open iroot application and wait untill ur device detected in the application and click root button and wait for success msg
in this process some china applications are installed in ur phone so uninstall them after the rooting process is done and be sure ur phone battery should above 40%
dont disconnect ur phone during this process
---------- Post added at 07:51 AM ---------- Previous post was at 07:38 AM ----------
A MediaTek android device (MT65XX) Auto Insurance
Your phone must be rooted already. How to Root
USB Chord. Auto Insurance
Windows PC/Laptop.
Download ADB Drivers : Auto Insurance
ADB Drivers. Auto Insurance
Link 2 : ADB Drivers.
Download MTK Droid Tools for Windows : Auto Insurance
MTK Droid Tools for Windows.
MTK Droid Tools for Windows.
How To Flash ClockworkMod (CWM) Recovery on Any MediaTek (MT65xx) Android Device :
1. Download necessary files from above links.
2. Install the downloaded PDANet to your computer. It contains ADB Drivers.
3. Turn on your android device and connect it to your computer using USB Chord. (Make sure to Enable USB Debugging, go to Phone Settings -- Developer Options -- Enable USB Debugging.)
4. From your computer, open MTK Droid Tools that you have downloaded above and extract it to your desired location.
5. Open MTK Droid Tools.exe from the extracted folder (Run as administrator). Wait for the tool to detect your device. (If UBIFS warning appeared in the status message, this process will not work for you. Only ext4 supported.). Notice on the bottom-left part of the tool, a YELLOW color indicator means that your android device is does not have root shell yet. If it is GREEN already, proceed to step 7. Click here to know how to ROOT your Mediatek Device or proceed to Step 6
6. Click ROOT button to enable root shell your device. Wait for the progress bar on the Status, see your phone to Grant Superuser access. If the color indicator turns GREEN, then you have successfully enabled root shell for your device. Auto Insurance
7. Now, select the Root, Backup, Recovery tab and and further choose To Use Boot From Phone from the selections. Click Recovery and Boot, a message prompt will appear "To make CWM recovery automatically", click YES. Auto Insurance
8. Wait for the tool to build the CWM recovery and another prompt will appear "install patched boot to phone?" select NO, wait a little bit more and another prompt will appear again "install created recovery to phone", now select YES.Auto Insurance
9. When the tool ask you to reboot your phone to recovery, click Yes and it will reboot to CWM recovery shortly. Check out your new custom recovery.Auto Insurance
Congratulations! You now have ClockworkMod custom recovery on your MediaTek android device. You can now enjoy apps that requires Superuser rights, mods and ROMs that requires flashing from CWM. Checkout ROMS collection of our blog. Auto Insurance
I hope this article helped you in Installing CWM on your Mediatek device. Queries & Suggestions are welcome in comment section. Do Like & Share this post. Thank You !
Click to expand...
Click to collapse
to root mmx a96 just download framaroot apk and select boromir or any other option
I have found a way to root the Samsung Galaxy J1 (SM-J100VPP, Verizon) without needing to flash modified, rooted firmware using ODIN. I do not know if this unlocks the bootloader. Maybe someone can reply with an answer.
1. Make sure ADB/USB debugging is turned on. Settings > about phone > tap on 'build number' seven times to enable developer options.
2. Tap back button once and tap developer options. Make sure the box next to 'USB Debugging' has a check mark.
3. Plug your phone into your PC and open up an ADB window.
4. Download and install the Hidden Menus APK attached to this post, located at the bottom of the thread. (If using ADB to install, place the APK in your ADB folder and open an ADB command window and type: adb install HiddenMenus.apk)
5. Open the Hidden Menus app and scroll until you see 'Rlz Debug UI' and tap on it.
6. Where it says 'OEM Mode', make sure 'on' is selected (tap the circle next to OEM Mode to turn it on).
7. Go to my Google Drive, download and install 'android_root.exe'. This will install an older version of KingoRoot onto your PC.
8. Open KingoRoot for PC and connect your phone to the PC.
9. At the very bottom, left corner of the KingoRoot for PC window, make sure to UNCHECK the box that says 'install recommended app'.
10. Click on root and let KingoRoot root your phone.
Replace KingoRoot with SuperSU
I don't like one-click-root apps. I don't trust them. So whenever possible, I try to find methods to install SuperSU. Below is a guide to replace KingoRoot with SuperSU. The method in this thread works and only consists of a few steps. First you'll need to go to the KingoRoot homepage and download the APK for Android and install it. Then follow the steps below:
1. Delete/Uninstall Kingouser, but keep Kingoroot. DON'T reboot your device
3. Install SuperSU apk from flashable zip v2.79 (APK provided by me, attached at the bottom of this thread).
4. Launch it, press "continue" and "normal" wait until the update is successful. (You might have to close the SuperSU app and reopen it to complete this step).
5. Reboot and uninstall Kingoroot.
Thanks everyone. I really love this little phone!
ok, so all that has happened here IS. you happened to have a samsung galaxy j1 sm-j100vpp verizon prepaid phone that happened to NEVER be updated to the unpatchable 5.1.1 and you rooted the existing firmware that we all have to downgrade to, to be able to root. And to answer your question about the boot loader.... NO, flashing or MODIFYING the firmware has nothing to do with the boot partition.
BUT. the super su replacement has caught my eye and is how i found this post. I will check the work and report back. this would be a huge step forward in creating a 32 bit custom twrp as the chipset in this phone only supports 32 bit and is why twrp (cwm similar etc....) does not work on this device. i have noticed another samsung device that has "alot" of the same chipsets but still supports 64 bit and has a promising twrp I may be able to compile as a 32 bit only recovery img. after that. its smooth sailing.
Hello everyone! This is my first post, I'm very very new here If I somehow missed a rule or two and shouldn't have posted here or etc DO TELL ME, Im open to anything and I appreciate it! To the point, I won't stretch the topic, I'll tell you how I rooted my Gionee x1 device, and the problems I faced and their solutions. You may ask yourselves or just come reply here, Who even owns that device, Well I own one and I wasn't able to root this device it was hard, so for the other mates out their having bought this piece of brick.
and, there's a reason to why Im writing this topic, do read to the end.
So, to start I first of all researched alot both on google and xda forums for any way of doing it, most of which either didn't work or were not supporting my device(f.e. One Click Root Methods didn't work at all).
1. This post has a reply by ZedLens, which is awesome but to my surprise it didn't work for me.
2. This post BusinessKid is a great tutorial for any MTK Device, but the 3rd step of "The Download Stuff:" I couldn't find the scatter for my device.
3. I've a strict download limit for my internet, so I couldn't download the Stock ROM, so I somehow had to extract it from my device, which I failed why? MTK Droid Tool wasn't able to recognize my device. I diagnosed for all possible reasons for this, bad USB check, bad device port check, wrong process check nothing worked, so at the end of the day I somehow managed to download the Stock ROM of Gionee X1 and EVERYONE HAS TO DO IT IN THE END, you'll really need it anyhow.
Now the rooting process,
Tools/Stuff I used:
1. SP Flash Tool(This thing here, is like your hand during examination)
2. MTK Drivers(Important)
3. Stock Gionee X1 ROM
4. Magisk Manager App
I'll attach the Magisk Patched boot.img here along with the scatter so that you can directly flash the boot img instead of wasting time to download the stock rom and etc etc. also you can reply down here if you need any other file, I'll send it to you somehow :3
NOTE: All the images, links, tools, programs and everything belong to their respective owners!! Everything you are doing with the steps above are STIRCTLY your responsibility, if you do it wrong and brick your device you can't charge me for bricking your device, only you and you will be held responsible for any damage/sucess/etc to your device.
Steps to install:
1. Get Stock boot img
2. Install Magisk Manager (DON'T DOWNLOAD IT FROM ANYWHERE use TopJohnWu's Github)
3. Somehow get the Stock boot img into your Internal Storage or anywhere, where Magisk Manager can find and Patch it, Use adb push, connect usb and copy it to the Internal Storage, ANYHOW.
4. After copying, Open Magisk Manager, you'll find two things on the main screen, one is Magisk which has status infos such as (Installed: ), (SAR: ), (A/B: ) and (RAMDISK: ). Within the same square which contains those status info you'll find a Install click on it.
4.1. After clicking on install you'll get a new menu, select next in the Options Square ignoring the choices there(Preserve AVB 2.0 blah blah) and click Next. Now you'll be in the Methods Square here, you select "Select and Patch a File", now locate to the Image and after successfully locating and selecting it click on Let's Go on the right cornor.
4.2. If your image is patched successfully your log in front of you will look something like this:
- Device platform: armeabi-v7a
- Installing: 23.0 (23000)
- Copying image to cache
- Boot image is signed with AVB 1.0
- Unpacking boot image
- Checking ramdisk status
- Stock boot image detected
- Patching ramdisk
- Repacking boot image
- Signing boot image with verity keys
****************************
Output file is written to
/storage/emulated/0/Download/magisk_patched-buildno_abcde.img
****************************
- All done!
Click to expand...
Click to collapse
4.3. You have your patched boot image!!
5. Now get the patched image back to your pc -.-
6. Prepare yourself to focus, Im not responsible for your bricked device!
7. Goto This XDA Post for Tutorial and Information about SP Flash Tool, MTK Drivers ADB Drivers, etc etc.
8. Download and Install MTK Drivers(Link Credit: Bovirus' this post)
1. You'll find a exe, just execute it and it'll be installed automatically.
Click to expand...
Click to collapse
9. Download and open SP Flash Tool and select Scatter-loading file.
10. Now After you've selected the scatter loading file you'll find there are various selections in front of you, Preloader, lk, boot, recovery and etc etc
10.1. DESELECT or UNSELECT (OR WHATEVER YOU CALL IT) every selection other than boot.
10.2. In the row of boot/bootimg, (remember the patched boot image?) click on LOCATION you'll get a explorer window to locate to the patched boot image, locate and select it. In the last it should look something like this:
https://imgur.com/a/WMbTTAC
10.3. Click on Download in SP Flash Tool and connect the device, see next step.
11. Power Off the device and Remove the battery(See 3. in Issues I faced).
12. Now while pressing the Volume UP and Down Button together, connect the M-USB to your device port. I can't explain this but, firstly connect the USB cable to your pc then to your device haha.
13. You'll hear the device connected sound of Windows(If windows user) and the flashing will start
14. Reboot to OS and Voila! Check your Magisk Manager, your device is now rooted! Do remember to install the Magisk App just below the Magisk Root Check!
Now, issues I faced:
1. Device wasn't connecting to the SP Flash Tool, I reinstalled the MTK Drivers but it didn't do any change.
2. FastBoot flashing didn't work, I opted for SP Flash Tool later.
3. Device was starting into Factory mode and/or Recovery mode whenever I pressed Volume UP/Down and then connecting the device through USB, removable battery came to my rescue. Removed the battery, pressed both volume Up and Down button and then connected the USB.
NOTE: Again, all the images, links, tools, programs and everything belong to their respective owners!! Everything you are doing with the steps above are STIRCTLY your responsibility, if you do it wrong and brick your device you can't charge me for bricking your device, only you and you will be held responsible for any damage/success/etc to your device.
Links for boot.img and scatter file: Here is the MediaFire link, I've scanned the files with my Quick Heal Total Security I'm not those multidadoffspring who likes to spread virus/malware etc. and Here is the VirusTotal Link.
Feel free to tell me my errors and mark how can I improve, I appreciate it
And also, if you need any other file from the Stock ROM of the same device, do tell me here or DM at my insta: heartwastaken
Sorry for my bad English.
Thank you!!
Have a great Day
-Vish