Hello Friends,
i have found many queries regarding how to get stock recovery back...therefore i am presenting the solution of it....
->Requirements
Stock Recovery Image(in attachments)
Scatter Loading File(in attachments)
Micromax A116 Drivers(32bit/64bit)
SP Flash Tool
A computer
A Micromax A116 (obviously)
->Steps
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Great Work Man
Great Work Buddy!!!!!!!!!!
hey guys,
now i have a small gameconsole.
my cubot one has lost his IMEIs and i can´t restore them.
i have tried
1. Enter in engenieer mode with : *#*#3646633#*#*
2. Go to Connectivity > CDS Information > Radio Information > Phone 1
3. At "AT+" line add : EGMR = 1,7,"my_first_IMEI_code"
4. Clic on "SEND AT" button below
5. At "AT+" line add a second time : EMGR = 1,10,"my_second_IMEI_code"
6. Clic on "SEND AT COMMAND" button below a second time
7. Reboot phone
8. Verify codes with *#06#* if IMEI codes are ok
Click to expand...
Click to collapse
and in terminal
su
echo 'AT +EGMR=1,7,"IMEI_1"'> /dev/pttycmd1
echo 'AT +EGMR=1,10,"IMEI_2"'> /dev/pttycmd1
Click to expand...
Click to collapse
and i tried MTK Droid Root an Tools 2.4.8 IMEI resoration
and i tried to install the orginal rom
i did not try SP_Flash_Tool_v3.1320.0.174 because i don´t know how to do.
i get messages i don´t know if it´s ok or not.
i have a folder with the following content, made when i rooted my phone.
<DIR> .
<DIR> ..
boot.img
cache.ext4.img
cache.ext4.tar
data.ext4.img
data.ext4.tar
EBR1
EBR2
files.md5
firmware.info
logo.bin
MBR
MT6589_Android_scatter_emmc.txt
nodl_expdb
nodl_misc
nodl_pmt
nodl_protect_f.ext4.tar
nodl_protect_s.ext4.tar
nodl_pro_info
nodl_seccfg
nodl_secro.bin
nvram.bin
phone.info
preloader_and_dsp
recovery.img
system.ext4.img
system.ext4.tar
uboot.bin
userdata_nvram_only.ext4.tar
Click to expand...
Click to collapse
do i have the the abillity to restore my IMEIs?
what is to do?
k guys, here i write down my way to get back my IMEIs.
You Need:
1. Latest or minimum version v3.1320.0.174 of SP Flash Tool
http://chinamobiles.org/downloads.php?do=file&id=864 (if you have a link where you can load allways the latest version write it in this thread. I will add it.)
2. Latest version of MTK Droid Boot & Tools or at minimum version 2.4.8
3. A Backup made with MTK Droid Boot & Tools while rooting
Click to expand...
Click to collapse
Lets do it:
Part One:
1. Start MTK Droid Boot & Tools and go to root, backup, recovery.
2. Press "To prepare Blocks for Flash Tool".
View attachment 2288753
3. Navigate to the folder with your MTK Droid Boot & Tools Backup and select the MD5 file.
View attachment 2288754
4. Wait until job is finished. You will see it in the LOG section of MTK Droid Boot & Tools
View attachment 2288756
5. Your SP Flash Tool compatible Backup will be stored inside a folder of the folder where your MD5 file is.
View attachment 2288755View attachment 2288757
End Part One
Click to expand...
Click to collapse
Part Two:
1. Open SP Flash Tool
2. Tick options -> USB Mode
3. Tick options -> DA Download All -> Battery -> With Battery
View attachment 2288758
4. Load your Scatter file. (Use the Scatterfile from your "!Files_to_FlashTool" folder made by MTK Droid Boot & Tools)
View attachment 2288759View attachment 2288760
If your SEC_RO is checked skip the following text and go directly to 6.
Now you will see most of the entries are checked. Maybe SEC_RO is not checked and now we fix this, because it is very important.
View attachment 2288761
Iin your MTK Droid Boot & Tools backup folder is a file "nodl_secro.bin". This is the same file like secro.img. it has another name because it comes from ext4 filesystem.
5. Tick the SEC_RO entry and use the nodl_secro.bin from your MTK Droid Boot & Tools backup folder.
View attachment 2288762
6. Untick preloader
End Part two
Click to expand...
Click to collapse
Lets bring back your Phone:
1. Remove the Battery from your phone and disconnect your phone from USB
2. Recheck if PRELOADER is UNCHECKED and press "Download"
View attachment 2288763
3. Insert your Battery
4. Plug your USB cable while you press volume up or down hold the button until i write to release (may differ on device (try the other volume button when at 5 nothing happens))
5. SP Flash Tool starts to send data to your phone. You see a red bar and after the red a violet bar at bottom of SP Flash Tool.
6. After the violet bar you see a yellow bar. Now you can release the volume button.
7. When flashing was sucessfull a new smal window with a green circle will pop up.
8. Eat a gummybear. You have deserved.
9. Unplug your USB and remove the Battery, wait 10 seconds and insert your Battery.
10. Start your Phone
Now you should have your IMEIs back and your Phone should work mormal.
Click to expand...
Click to collapse
Maximus1a said:
k guys, here i write down my way to get back my IMEIs.
Lets bring back your Phone:
Click to expand...
Click to collapse
I get to the last part "bring phone back" step 4. SP Flash Tool Does not pick up my device (Nothing happens) i tried volume up and volume down, nothing. Volume Up enters recovery, Volume Down shows me yellow text saying "factory mode" but nothing :/
Edit: PDANet driver installed btw
Maximus1a said:
k guys, here i write down my way to get back my IMEIs.
Lets bring back your Phone:
Click to expand...
Click to collapse
anyone?
lost imei after flashing wrong recovery image
I have a mtk 6589..dualsim..I lost my imei and this guide worked..Got my phone working again..Thank you..
---------- Post added at 11:56 AM ---------- Previous post was at 11:51 AM ----------
Use this guide..Works perfect..
Great!
Maximus1a said:
k guys, here i write down my way to get back my IMEIs.
You Need:
Lets do it:
Lets bring back your Phone:
Click to expand...
Click to collapse
Thanks Dude! you're my saviour..
Thanks for guide
Thank you.
I almost gave up but thanks to you and this guide i managed to get both my imei back.
help
Thank you.. My imei is come back normally like before.
But, i dont know why in my serial number become "12345678abcdef"
I had to trying to change on /sys/sys.info/serial number, save but not changed.
What should i do? Thx before
your serial number is not important. forget about it.
Hi... Can you upload the folder in a zip file.. I need it
bricked my mtk6589 no imei no baseband no recovery image
Can you help my by uploading your recovery image?
Maximus1a said:
k guys, here i write down my way to get back my IMEIs.
You Need:
Lets do it:
Lets bring back your Phone:
Click to expand...
Click to collapse
Hi thanks for this tut. I was just wondering though, why is it important to untick preloader in step 6 if were just going to tick it again on step 1 of Lets bring back your Phone?
hei pal
i just wanna say big thanks to you
now my phone back to normal, i can use it for call
you saved my phone
HELP!!!
Hi guys i need a complete backup for my blu dash 4.5 because i don´t have the secro.inf or ndl_secro.inf file please i need a complete backup for restore my imeis
unbrick MT6575 Chinese dual sim android phone
i accidentally place the wrong boot img in my phone i have all files backed up but in SP flash tool i dont see secro and cache img files coming up so that caused the flash tool to fail periodically, please help me out its my wife's phone
I am trying to unbrick a mtk 6589 device on spflash tools but i keep coming across a BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069) error, can anyone help with a solution? i would be so grateful.
thanks in adv
Hi. This is a nice tutorial. I'm glad you found a way to fix your IMEI.
I'm on step 3, by the way, and I encountered a problem. My computer seems to not recognize my device when downloading files using SP Flash Tool. I already have the drivers installed (PDANet, mtk VCOM, and Android Universal Drivers) but my device still cannot be detected.
It is detected though when I plug it in using MTK Droid Root and Tools so I'm thinking I have the right drivers installed. It's just that when using SP Flash Tools, it kinda goes under the radar. Do you happen to know why this is?
ouro898 said:
Hi. This is a nice tutorial. I'm glad you found a way to fix your IMEI.
I'm on step 3, by the way, and I encountered a problem. My computer seems to not recognize my device when downloading files using SP Flash Tool. I already have the drivers installed (PDANet, mtk VCOM, and Android Universal Drivers) but my device still cannot be detected.
It is detected though when I plug it in using MTK Droid Root and Tools so I'm thinking I have the right drivers installed. It's just that when using SP Flash Tools, it kinda goes under the radar. Do you happen to know why this is?
Click to expand...
Click to collapse
sorry for the late reply.
are you on windows 8 or 8.1?
until now i never got sp flashtool running correct on 8 or 8.1.
the phone disconnected itself from PC before anything could happen.
Maximus1a said:
sorry for the late reply.
are you on windows 8 or 8.1?
until now i never got sp flashtool running correct on 8 or 8.1.
the phone disconnected itself from PC before anything could happen.
Click to expand...
Click to collapse
I'm on Windows 7, but that happens to me too. The driver shows up in Device Manager, then disappears after about a second. Do I need to install another driver? Am I missing something? Thanks for your reply, by the way.
I’ve spent hours on end working on this project.
Let’s face it. No android developer loves to use the volume rocker to move up and down the recovery menu. It’s plain tiring. But now that’s a thing of the past.
With TWRP recovery, all you have to do is tap away on that screen.
Now, the icing of the cake;
HOW TO FLASH TWRP ON YOUR TECNO PHANTOM
Requirements:
1. MT6577 USB VCOM drivers. Download link >>> https://www.dropbox.com/s/b8em7wbioii8jdm/Tecno F7 drivers.rar
2. SP Flash Tool. Download link>>> https://www.dropbox.com/s/ek98h3ax0i1ukmj/SP Flash Tool.zip
3. MT6577_Android_scatter_emmc
4. TECNO F7 TWRP recovery image file. Download link >>> https://www.dropbox.com/s/mfwi9qqg6w1rtd1/Recovery+scatter file.rar
5. Computer
PROCEDURE
1. Install the MT6577 USB VCOM drivers on your computer
2. Install then run the SP Flash Tool
3. Once the flash tool is up and running, load a scatter file from wherever you’ve stored it on the computer
4. Unselect any checked box except the recovery one, then click on recovery and choose the TECNO F7 TWRP recovery from wherever you’ve stored it on your computer.
5. Click the download option with an arrow, then connect your phone. Remember to remove your phone battery before connecting your phone.
6. Wait till a dialog box with a green circle appears. And that’s it! You’ve successfully flashed the recovery to your PHANTOM A
Now reboot to recovery and enjoy.
Click thanks if I helped you.
twrp
Pls a new recovery download link. Pls if possible to my email [email protected]. thanks sir
GUIDE TO RE FLASH/RECOVER/FIX IMEI (TESTED ON MICROMAX CANVAS HD A116)
If your problem is still not solved, then follow these steps:
1. Download SP flash tools, USB driver for your device, stock rom for your device.
2. Install usb drivers (no need to istall preloader etc.)
3. Run sp flash tools.
4. In scatter file, give path from stock rom (downladed as said above).
5. Remove battery, sim, and memory card all from your device.
6. On sp tools, click format and select whole flash.
7. Now keeping power button and volume buttons pressed, connect your device to pc/laptop. HOLD THE PHONE AS IS TILL SP TOOLS SAYS OK WITH GREEN CIRCLE.
8. Disconect your device after green signal on sp tool.
9. Click download on sp tools, and then follow step 7 as is. DO NOT RELEASE BUTTONS OR DISCONNECT PHONE TILL GREEN SIGNAL COMES.
10. Now install battery, sim n all. and reboot phone. Now if it stuck in boot loop. then install custom rom via recovery.
After rebooting your phone, got to engg mode and type your IMEI number and reboot andENJOY
HELP FROM WAVE RIDER
DISCLAIMER: DO NOT FLASH OR WRITE WRONG IMEI NUMBER. FOR ANY ILLEGAL ACTIVITY USER WILL BE RESPONSIBLE. THIS HELP IS ONLY FOR WHO LOST THEIR NVRAM DATA AND FACING IMEI INVALID ISSUE. I AM NOT RESPONSIBLE FOR ANY ILLEGAL FLASHING
i had try to find the twrp file for lyf water 7s but i did'nt get i search ..unable to find can anyine tell me plzz how to root lyf water 7s without pc its too hard i use all app or tell root through pc but safe way
Hey Guys,There is a Good News for you all After a long time i have found The way on how to root our phone LYF Water 7s Ls5507{yup you read it right} ? I have ported a TWRP Custom recovery for it [ I know its very long time since no development has been done for our very own device but wait is over now ! ]
Procedure to flash TWRP Recovery and Root
------------------------------------------------------------------------
Follow These Steps:-
1>Download The required Tools pack for flashing the recovery From here-https://drive.google.com/file/d/1Dnq6DwJdLI3lYyLQzgUG3Y_u024EiWEd/view?usp=drivesdk And Super Su v2.82 From here-https://drive.google.com/file/d/1jMjCziMaafiyo3_b0GVlaDZEy1RB1fbb/view?usp=drivesdk
2>Install the MTK drivers for your phone in your Computer (search the Google)
3>Extract the tools pack on your computer and copy the Super Su v2.82.zip to your phone's SD Card
4>And After Extracting tools pack you will get 2 folders Twrp Recovery pack and SP Flash Tool
5>Open SP Flash Tool Folder,Double click Flash Tool.exe
6>Now in SP Flash Tool Click on Scatter Loading Button
7>Now Locate the folder where you have extracted the "Twrp Flashing Pack" Folder open it and select Mtk6753 Android Scatter.txt and click open
8>From the List Choose Recovery and hot the Download Button Above
9>After Clicking "Download" Completely Power off your phone and Connect your phone to Computer using USB Cable and the Tool will start flashing the Recovery image in it
10>After the Flashing Process Completes You will be able to see a green ring,now disconnect the cable and press and hold volume up(+) and power button ,you will see very small words according to them locate recovery option using volume up(+)key and select it using volume down(-)key then after some time the recovery will open.
11>In the recovery draw your pattern or enter your password(if asked)and swipe the bar ,then go to Your sdcard location where you have placed the Super Su v2.82.zip then flash it and reboot your phone(at first boot it may restart 2 times but dont worry its preparing the phone)and when your phone boots up........ Congratulations you have rooted your device successfully !
-------------------------------------------------------------------------
If you liked my work please let me know
Thank you !
Also i will keep updating you all about the latest mods and hacks for the device and for now i m trying to port miui 9 for the device !
So stay tuned !