hi experts,
i am into a great problem, i rooted by Qmobile A600 and tried to flash a rom, rom did not installed se hanged, i restarted but phone was unable to start (just black screen & restarting ), i entered into recovery mode when i try to use recovery options by pressing volume up and down key , nothong happens just set restarts. kindly help me ??????
since no one replied to me here, i installed A900 software on Qmobile A600 through sp flash, now set is not even starting..... kindly tell me what i can do now, ???
ranarizz said:
since no one replied to me here, i installed A900 software on Qmobile A600 through sp flash, now set is not even starting..... kindly tell me what i can do now, ???
Click to expand...
Click to collapse
Flash It With Factory Firmware !
https://youtu.be/PTpGqletP5Q see this and flash it using sp flash tool hope it will boot.
Related
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
try adb
And reboot recovery
Swyped on my blade
CWM stock recovery
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
Micromax has stock CWM recovery built in and can be accessed by keeping the Vol+/Vol- button at the top pressed and then pressing the power button..
I Replaced the product
vNa5h said:
try adb
And reboot recovery
Swyped on my blade
Click to expand...
Click to collapse
Product was not booting (not in recovery mode also) how was i supposed to use adb?
I finally take it to micromax service center they annouced product dead, and handed over DOA policy to me, :silly:
I took that policy letter to Retailer and he replaced the product:good:
(It was only 2day old product)
anyway thanks for the help :fingers-crossed::good:
thatsgamer said:
Product was not booting (not in recovery mode also) how was i supposed to use adb?
I finally take it to micromax service center they annouced product dead, and handed over DOA policy to me, :silly:
I took that policy letter to Retailer and he replaced the product:good:
(It was only 2day old product)
anyway thanks for the help :fingers-crossed::good:
Click to expand...
Click to collapse
adb stands for android debugging bridge ..connect your phone via usb cd into folder containg adb and do adb reboot recovery
Micromax funbook pro stuck on boot image
Hey i got micromax funbook pro and i tried to install clockwork recover mod in it.after rebooting to recovery mode my device is stuck in micromax logo and not moving forward.could anybody tell me what to do now?
Live Suit is the solution
Listen Mr. thatsgamer
You can use the livesuit software for recovering your tablet, even I faced the same issue which i recovered using livesuit
For any information just message me in facebook at: fb.com/AdityaRRayala
If u thought the reply is appropriate and helped anyone kindly fire the thanks button
I Can Help!
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
Press Vol+ button + Back Button + Power Button
Don't Hold
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Flash stock firmware
With this tutorial
http://forums.droidbeans.com/microm...)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
ArshArora said:
Flash stock firmware
With this tutorial
forums.droidbeans.com/micromax-a116-canvas-hd-rom-index/(stock-rom)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Use traditional method (SP Flash Tool)
Raveesh Delhi said:
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Click to expand...
Click to collapse
Use sp flash tool... Video link for it
http://m.youtube.com/watch?v=7pCiWR_H7wc
Enjoy bro!! Hope it will help you.
Raveesh Delhi said:
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Click to expand...
Click to collapse
OK so as the recovery is accessible by u
Flash som other ROM 4 nw
Nd thn download a flashable zip of stock Nd thn flash it
Rooted Canvas HD stuck on logo
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
You need to flash the files given in the thread using SP Flash Tools !!
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
Bheem I hope your problem has been solved.
As for my problem, my device is unsavable.
try wiping dalvik cache
otherwise reflash after clearing all the necessary things
Without working usb connection, you should not try flashing different roms. I lost Samsung galaxy i5000 due to same problem. I didnot have button combination option to go to recovry.
However your device can survive. 1. Turn off the phone by removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key . after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia z2(my choice only, you can try any stable rom) from your memory card.
This should work and get usb repaired aSAP.
Hey guys
I have Micromax A114. It just won't boot up. No logo nothing. When I connect it to my laptop it keeps connecting and disconnecting. Please help me guys. Can't even flash stock ROM as the phone keep disconnecting.
Can't go to fastboot or recovery. Its bricked
You can always go to the Service Center but they will not touch your mobile because your phone is rooted .. If you unroot it also it will have traces so going to service center is a bad idea
hi everyone ,
question: what can i do when my gionee p3 got stuck at 'gionee logo' and cwm recovery is also not working ?
detail: I tried to flash TRPW.ZIP file using cwm recovery and after reboot phone get stuck at company logo and when tried to open cwm using vol up+power button phone started flashing i.e cwm is not opening. i tried to use adb and run the command ‘adb reboot bootloder' but it shows ‘waiting for device’ and some times 'null device found' . i also used odin but my phone is not getting decected.
I was using stock jelly bean rom and my device was roooting.
IF YOU WANT MORE DETAILS THEN I CAN SHARE IT.
I HOPE YOU GUYS WILL HELP ME
Please note that iam not an advance user but i know some little things about rooting.
(Iam new to xda so, if their is any mistake in the question then iam sorry)
Sir/Mam, I would like to say that my tab (Micromax fun book p350) got bricked when I tried to flash philz recovery ,now it is not booting and even recovery mode is not opening it just shows the micromax logo. So please help me and tell me what should I do and I want to use aroma file manager in that so could anyone make me a custom recovery which supports aroma fm for that tab.
Thank you,
I was installing twrp custom recovery and it showed some message regarding cache partition , and then suddenly it turned dead. The phone is not switched off,neither can i switch it off by any means.
It is not responding AT ALL!!
phn is INTEX aqua power hd
hardware vers. - mt6592
PLZZZZZ HELP:crying::crying::crying::crying:
U can try flashing stock firmware using Sp Flash tool. It should work for u.