Good day! I decided for the first time decided to make a Firefox OS firmware to the latest version pokapalsya the internet, a couple of our firmware. Did all the instructions in the end there is only saver phone and everything is no longer ship. After the official program of Alcatel also fails to update. Having tried all the methods on this site, nothing works. It may still be able to install anything else, any OS?
Related
Hi,
I really, really hope someone can help me with this: I have an unbranded europeans GSm hero on the Dutch Telfort network. I was really looking forward to the official 2.1 update, but I can't even install the preparing OTA-update (including the YouTube update). I'd be really grateful if someone can help me out!!!!!!
Firmware: 1.5
Build: 2.73.405.5 146733 CL#61267 release-keys
Software: 1.0.0.A62888
My computer: Windows 7 (64), HTC Sync and drivers installed
OTA update
About two weeks ago I received the preliminary update notification on my phone (4.6mb or somehting like that). I downloaded it and in the next window I chose to install it. The phone rebooted, but remained stuck in de HERO screen forever. I removed the battery, rebooted it, changed the date, received the OTA again, but same thing happened. Apparently, the update cannot install.
I figured it might have something to do with my current build not allowing the update, so I tried installing the original RUU from HTC. But that didnt work either: it kept saying "waiting for bootloader..." and eventually gave some USB-error message (error 171). So it seems it cannot connect to my phone. Other RUU's don't work either. Downgrading therefore seems impossible too.
Recovery image
It appeared to me that perhaps my recovery image is broken as I once unsuccessfully tried to root my Hero (Tell me, is this related? i really dont know). I used the flashrec method back then, but it didnt seem to work. Afterwards, other flashing attempts using Flashrec or abd via the terminal didnt work either.
Flashrec gave "backup failed: remote not allow" or "backup failed: image invalid" or somehting like that.Adb says "device not found" or "remote failed" or "somethign similar" Somehow I have the idea the recovery image is corrupted, but the flashrec requires you to back it up before writing the new image. As it wont backup, it doesnt allow to install the new image.
I asked HTC for help, but they were of no avail: they advised me to do a factory reset. That worked, but the problem remains and the OTA update still won't install. I e-mailed them again, but they are not very guick at replying.
Does anyone have an idea how to solve this and has anyone had similar problems? I'd really like to know. To be able to install the official 2.1 would be great, a stable custom 2.1/2.2 rom would be fine too.
Please be very clear in any steps you might describe cause some of the walkthroughs are not really clear to me.
I am even willing to give the person who is able to help me a voucher for some webshop, cause I'm getting really annoyed with my phone now.
There you go http://forum.xda-developers.com/showthread.php?t=647353
I eventually got it to work: I used a computer with winXP instead of my Windows 7 (64bit), which at least helped me install to wipe the phone, install a working RUU and eventually, the OTA update worked.
That was months ago... now I'm trying the 2.2 Sense port for my Hero and it seems to be giving less problems than the official update LOL
Well I heard that android 2.2 was available with froydvillian ect, so i decided to update to that, i followed the steps of installing villainrom first which was successful.
I then went onto installing froydvillain 1.5 the same way but was unsuccessful on many times (just got stuck on the hero screen).
I then decided that I'd just stick with the orange firmware so used the update on the PC get android 1.5 on.
I then was going to update the 2.1 but could get the usb to work, and it wouldn't mount to the pc. I then downloaded the update through mobile web and it installed.
Now my problems are that i cant download from android market.. "Download unsuccessful", aswell as not bieng able to sign into facebook ect.. I am signed into google. I have factory rest the phone to no luck, and cannot reinstall the firmware from the pc as im getting the usb error.
Help please?
New error, my phone says its got 50% bettery, the update on the pc says its got less than 30%.
I believe it has nothing to do with the ROMs. Me, as well as 3 or 4 of my other friends have the same problems today with the Market, some of them use the stock and others, including me, custom ROMs. I guess Google's doing some maintenance or something... I don't know why Facebook doesn't work, though.
its google issue
i have the same problem, but its good to know that its a google problem...i was a little panik rightnow cos i just flashed a new rom =)
Hi, I have been following this forum for a long time but I had never logged on. I commented my problem, although I saw several threads that deal with the subject, I did not see any updated or that I clarify the doubts well.
I'm from Argentina and buy aliexpress LG V10 H900, refurbish, came with Android 5.1. Seeing through several forums I saw that ATyT released an official update to 6.0 Marshmallow, to update via LGUP (via OTA I did not get to be outside the USA). I did not have problems to flash it, but when I started to test the functions, I found that the fingerprint reader does not work, it does not let me directly enter the settings. LG VPN error when starting, does not allow me to uninstall preinstalled apps (restarts the cellphone), among other errors.
Then I found out that you can not go back to Android 5.1, nor is there another ROM to try. I made a complete wipe from the cel options after the update. When I wanted to start from recovery I could never, try with all the key combinations and I could never, it is as if I did not have recovery ... Nothing work for me.
Sorry if the post was long, I hope to solve it and give me their experiences and opinions. Thanks and greetings to the community
Hi, this is my first time posting on xda forum, so if my post has some problems, I'd be delighted to correct.
So, I bought the Huawei Honor Pad 2 tablet about a year ago, and about last month it asked me to upgrade the system, and after the upgradation, the wifi icon becomes greyed out and I'm unable to turn it on. I tried to factory reset and wipe its cache partition but still no luck.
I dont know whether to flash its firmware would solve the problem but a few sites I stumbled upon, none of the links works(e.g. huawei-firmware rom links for my tablet model number don't work)
Some searches suggested it could be my hardwares malfunctioning, but since the wlan option greyed out problem only occurred immediately after the system update, I wonder if reflashing a new rom would work.
So I have run out of ideas, also I could not find honor pad 2 on the official huawei website, nor on xda forum, it mostly gives me mediapad as a result, but they seem different on pictures.
And some specs about my tablet:
Model: JDN-W09
Build Number: JDN-W09C233B023
EMUI Version: 4.0.3 (can't remember the original version but this is the one I got after that horrible system update)
Any helps are greatly appreciated!
up
up
uuuuuuuuugggggggggghhhhhh
Hi,
I had the same update,and we have the same specs,but tell me please how did you manage to get google play and all other google things to work?Maybe its because you are rooted?
It seems we are the only ones that we have this tablet,cos i can't find anything about rooting it or solve the google play problem without rooting.The worst thing is that nobodys bothering to make a post about it cos maybe the tab had been bought by a few people.
I don't have your problem,mine is working ok but my problem is way greater.I have done cache clears,download and intstall google services several times and some other tricks that i found on the net but nothing seems to work.
One click rooting methods:none of them work!
The οnly sure thing that we both need is a guide of how we are going to update the firmware to an earlier version(stock firmware)
Here on XDA i found only guides for phones of honor or tabs like media pad m2 that they seem to be similar but yet...i'm not sure.
I hope someone will take the time to answer on your post and our problems with this awesome tab!
I have also upgraded my Honor Pad 2 JDN-AL00 model to EMUI 4.0.3 B023 latest firmware and faced similar issues of Google apps not able to run anymore. I have tried to rollback the update by reflashing with older firmware versions. The update process shows success but when I boot up the set it still shows B023.
After researching the net, I think the problem could be because the older firmwares found in huawei-firmware.com are all OTA which means they are incremental updates. To fully rollback to earlier versions, I think we need Full OTA firmware. So far the only one that I can find on the net is B018 version. It’s abt 1.7GB. I have not gotten down to test out my theory. If you’re keen you can give it a shot and let everyone here know if it works...
I have to admit, I'm pretty confused and a bit tired... nothing is working for me as in other phones and I can't seem to find any reliable info how to tackle my problems :/
I have the RMX2202 model in the 8/128 GB version.
My end goal is to have Android 12 and from what I read, I need the latest Android 11 update first for that. Only, the system shows me that the version I have (RMX2202_11_A.13) is already the latest, and from what I look on the internet, A.16 is already available.
I even downloaded a zip with both the OS version A.16 and the Android 12 beta, but when I try to install either of them, it shows me "Verification failed. Package incompatible with your system."
I also tried booting the phone in safe mode, because I saw that people on YT had an option to install from a file there.... but I don't have it. I can only do Wipe, or Reboot.
Please help :c
PS.: This phone is from a major chain store in Poland, so I'm assuming it is the Global version.
Welcome to XDA
Consider yourself lucky.
Android 11 and 12 are a mess.
Android 10 is still relatively functional and usable.
Rule #1 - If your device firmware is fast, stable and fulfilling its mission, let it be.
Thank you for the welcoming msg
But just one thing, I said that I have RMX2202_11_A.13 on my phone right now, so I'm already on the Android 11, but just not on the latest update of it.
And I understand your point, but I'd still want to try Android 12, and even root this phone in the future.
I appreciate your warnings, but these are my needs right now and I'd very much like to know how and if I can do it at all on this phone
Android 12 beta was only for firmware a09.
Have the exact same issues! Can't do anything, I think it might be that I choose to unlock the bootloader via dev option but not sure, have you done that as well? I cant boot in to real recovery (only have the same option as you mentioned, wipe,reboot,turn of)
Can someone help us or point us in the right direction on how we can at least sideload an update somehow? No root, stock ROM.
Rydian_ said:
Thank you for the welcoming msg
But just one thing, I said that I have RMX2202_11_A.13 on my phone right now, so I'm already on the Android 11, but just not on the latest update of it.
And I understand your point, but I'd still want to try Android 12, and even root this phone in the future.
I appreciate your warnings, but these are my needs right now and I'd very much like to know how and if I can do it at all on this phone
Click to expand...
Click to collapse
Here's what I done.
Installed the VPN below
LineCN - VPN to visit China - Apps on Google Play
A VPN Application for Chinese to visit China
play.google.com
Run the VPN
Run software update. Now a blue button should appear. Click on it.
Download and pray for the gods.
Reverendo Philips said:
Here's what I done.
Installed the VPN below
LineCN - VPN to visit China - Apps on Google Play
A VPN Application for Chinese to visit China
play.google.com
Run the VPN
Run software update. Now a blue button should appear. Click on it.
Download and pray for the gods.
Click to expand...
Click to collapse
It works for me! I needed to put the slider back from "unlock bootloader" and restart the phone then I got it! Thank you very much!
Hello,
I have the exact same issue, I am stuck in RMX2202_11_A.13
I tried VPN, I tried re-enabling all user-disabled apps but nothing seems to work.
I have a global phone with global rom but I would like to get at least some update.
The update by VPN worked for me but I still dont have the Normal recovery, only partial. The is a bit weird to me.