Hey,
I have a problem with my V875.
I made an error while flashing the stock ROM, and after that my internal memory was damaged. I was unable to mount and format anything. So, I format everything (except the bootloader) with sp flash tool, but now my phone is dead. The only thing he does is turning on the led when usb charger is plugged (on a computer, or on the charger). And when I unplug it, the led remains on, and I have to remove the battery for turning it off..
I looked for a solution, and now I have the firmware for my device. But I need also the preloader.bin file...
Do anyone have it?
Thank you
Related
Hi guys, i realy need your help, my phone is dead.
My I9100 worked fine for two years, I flashed lots of custom firmwares by Odin. Half a moth ago, when I was going to sleep, I plugged in the charger as usually, and noticed, that it started beeping occasionally. On the display it indicated smth like: Charging... than Not Charging... than Charging and so on.
I thought that I plugged the charger incorrectly and replugged it, but it didn't helped. I was very tired and just simply turned the soud off and left the phone charging. In the morning it indicated that it is charging even when the charger was unplugged.
So I've flashed the firmware - no help, than kernel from stock to fillz - no help , than siyah than again to stock - no help. All flashings were maid via CWM. I realized that flashing will not help when I turned off the phone and it was indicating that it is charging.
I decided not to do anythig. Only USB mode didn't worked because when you want to use your phone as USB you should open the apropriate mode on the phone than there will be smth like : plug the USB data cable to enter the USB data transfer mode. I couldn't do this because my phone thought that the cable is already plugged. In forums i've got hints that my micro usb should be cleaned or small board should be replaced. So i decided to clean it. I disassembled the phone and cleaned that board with micro USB. Than turned on the phone, and connected the cable. Phone recognized it and I managed to transfer files from pc to phone. From this point I can say that all terminals on micro USB are ok.
When i unplugged the cable, phone thought that it is plugged((
The most awful part:
I decided to flash it one more time and go to stock via backup made by CWM a year ago.
But during this process the phone made a reboot by itself and after that there was no loading. I can see only name of the device and thats it.
No recovery. Only download mode.
When i connect it to PC in download mode, there is a sound that USB is connected but the device is Unknown. There is no any information about this device in dev manager on PC. I tried two USB cables, all usb ports, two laptops, all versions of USB drivers for my phone.
Earlier, drivers worked well, but now i can't understand where is the problem: Is the problem still connected with my micro usb port or i just erased boot sector and it is already brick.
I gave my phone to service center, they told that they can't help me with this. They say that usb is ok, we don't know why it is not detecting by pc.
Can the board replacement help in this issue or maybe i can do smth. in linux with my device ??? I'll appreciate any suggestions.
Yesterday I talked to representatives of service center and they told me that the problem is that internal memory is damaged and they cant flash the phone.
I took the phone and tried to flash it via Heimdall with brick fix pit.
After using this pit file, the phone was flashed normally and even turned on normally.
But in the phone info menu I saw no any data about internal memory. (It was damaged and required format). I tried format through phone menu and it did nothing.
I decided to flash the phone via Odin with normal 16 GB pit file and had a bad luck. I experienced freez during repartition. After this, phone is a complete brick.
When I connect it to PC without battery pressing vol down and rower buttons it connects as unknown device but there is nothing on the phone display. No recavery no download mode. Nothing - just reflection of my frustrated face).
Currently i'm tring to make a Jtag, maybe it'll put it in the download mode, but hope is dying....
I've herad somewhere that it is possible to put it in the download mode in linux. If somone did this, could you please give me the contact of this person?
Hi, I have the phone Zopo C2. I turned off the phone and stopped responding. When connected to the charger, nothing happens. When connected to a computer is detect normally, I can flash ROM by SP flashtool. And here is the problem, as long as I want toflash, reaches the first red bar to 100% and ends flash without error. Drivers have a good, first is connected as "USB PORT MTK" and how it comes to 100% red bar that goes in the "VCOM MTK DOWNLOAD".I have a second phone zopo c2 and there I normally flash, and everything goes without problems
I tried with the removed battery inserted, all methods and nothing, always the same 100% red stripe and the end of the flash without any error.
I wanted to flash such proloader same and is the same.
Phone is brick ? Memory in phone is dead or what ?? Can still fix it?
Sorry I from Poland and my english is very bad.
Uninstall all VCOM drivers.
restart PC and reinstall them.
Open SPFlash Tools, choose full speed and W/O Battery
Connect phone to PC.
If flash start, ok, if not, take out the battery and put it back again. Repeat if necessary.
PMoto said:
Uninstall all VCOM drivers.
restart PC and reinstall them.
Open SPFlash Tools, choose full speed and W/O Battery
Connect phone to PC.
If flash start, ok, if not, take out the battery and put it back again. Repeat if necessary.
Click to expand...
Click to collapse
I try on three PC. Always this same, flash start(100%red bar) and end, nothing more.
Any error. :crying:
any possible faulty memory?
Ok then, do like I post, but select only the preloader.
Then, restart all over again...
Hi!
I have bricked a MT6575 Star B79 phone. I know that is a very old-fashioned platform, but maybe someone can help me anyway.
I flashed it many times in the past without issues, but this time something was wrong.
Before brick, it had REVO 4.0.4-SGS4 firmware working for many time. The phone became bricked trying to flash stock 4.0.3 firmware PULID_B79(三码电脑升级)-20120707.
Actual state of phone is: Battery charging ok on power-off; at power-on phone shows the first Android image and then shows a black screen (back-light on; no sound, no starting “video”). In this state (power-on), if I connect to PC, the Device Manager of Windows shows a “Linux storage drive” (or some like that) and other “/F” device.
I can boot in recovery mode by it is stock recovery (<3e> version) and shows “failed to mount /cache”.
Preloader seams connect OK to PC when phone is connected without battery. But apparently, SP Flashtool can’t write to the phone.
I tried to flash with different versions of SP Flashtool, many different ROMS but always I got the same result.
SPFT shows the flashing advance bars and the green circle, but apparently, file is not write to the phone. I tried to flash a cwm-recovery, SPFT showed ok but stock recovery stayed in the phone.
I tried by changing drivers, but resulting state was the same. I also tried by “test point” method by disassemble the phone, same result (all OK in SPFT but nothing changed in the phone).
It seems like internal memory of phone is in read-only mode…
Someone could help me with this issue?
I apologize because of my poor english.
Regards.
I have this Lenovo A328 which suddenly had multiple and continuous gallery crashes. I tried to do a factory reset but get bootloop.
I decided to flash the stock rom using SP Flash Tool. The battery was charged ~ 50% Flashing the stock rom i always get s_da_mt_dedicated_pattern_error (3094) After 2-3 attempts nothing changed, still bootloop. After the next 2-3 attempts the phone stopped turning on and charging. I assumed that the case is in a discharged battery. It was really in her. The battery discharged to 3 volts so i asked my friends to charge it.
After the battery has been charged nothing has changed, the phone still does not turn on or vibrate.
Using SP_Flash_Tool_v5.1352.01, I formatted the flash. I downloaded the Lenovo A328 ROW_S322_140822 and flashed it. The result is OK, but the phone still does not turn on or charge. I tried every possible combination: format all+download, download only, auto format flash, manual format flash.
Any idea on this one?
Software & Firmware used:
SP_Flash_Tool_v3.1336.0.198
SP_Flash_Tool_v5.1352.01
SP_Flash_Tool_exe_Windows_v5.1520.00.000
SP_Flash_Tool_v5.1516.00
A328_ROW_S329_150708
A328_ROW_S324_141116
Lenovo A328 ROW_S322_140822
Hello everyone!
I am facing the same problem!!! After apps crashing, no start, no charge.... PC can see the phone in device manager under Win 10/ Win 7... (MTK usb port and MTK vcom preloader port)
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
hi. so my problem is that my phone does not turn on, i cant go to recovery or do hard reset. the phone react when i plug it in PC without battery, but its always connect and disconnect over and over again. i have downloaded the omap drivers and instaled it. now i have in the device manager a OMAP4430 FastBoot USB device. by the drivers was a fastboot emulator. but when i will flash rom, kernel or recovery a just get partition does not exist. can someone help me please? srry for english.
Does your phone not turn on at all when holding down the power button? If it boots up, and gets stuck on a loop or has an error message, that is different. But if it doesn't turn on at all, then your battery is dead or something is wrong with your phone's hardware. If you connect your phone to the PC (with the battery on), does it at least show a light? Or does it boot up at all when you hold the power button? If it doesn't show a light or boot up, it is not your battery, but your phone's hardware. Your phone might have been dropped or water inside it or it was microwaved? I know it sounds silly, but something happened to the phone physically. Now if you connect it to the PC and you see a light but it never boots, your device is bricked. Not accusing you, but you might have tried rooting it or writing over a partition on your phone which caused to brick. Also, try typing in fastboot devices. If it shows up a device, that means it is connected. Cheers!
No the phone does not turn on and it shows nothing, even when i put it on charger. If i connect to pc with battery after i installed the omap driver it just connect and disconnect over and over again, windows make this sound when you connect and disconnect something. I have flashed a new rom. It has worked but after some time its stoped. So i have try flashed it again but i could not get in recovery. A files was missing and after i try flashing thhe recovery its just dead. I can connect it just with the fastboot emulator because it's don't connect when i just put it on pc. I must connect it without battery wait 4 sec and then put the battery back. Than i can see in the emu my phone but not able flash anything because of partition does not exist