I have this Lenovo A328 which suddenly had multiple and continuous gallery crashes. I tried to do a factory reset but get bootloop.
I decided to flash the stock rom using SP Flash Tool. The battery was charged ~ 50% Flashing the stock rom i always get s_da_mt_dedicated_pattern_error (3094) After 2-3 attempts nothing changed, still bootloop. After the next 2-3 attempts the phone stopped turning on and charging. I assumed that the case is in a discharged battery. It was really in her. The battery discharged to 3 volts so i asked my friends to charge it.
After the battery has been charged nothing has changed, the phone still does not turn on or vibrate.
Using SP_Flash_Tool_v5.1352.01, I formatted the flash. I downloaded the Lenovo A328 ROW_S322_140822 and flashed it. The result is OK, but the phone still does not turn on or charge. I tried every possible combination: format all+download, download only, auto format flash, manual format flash.
Any idea on this one?
Software & Firmware used:
SP_Flash_Tool_v3.1336.0.198
SP_Flash_Tool_v5.1352.01
SP_Flash_Tool_exe_Windows_v5.1520.00.000
SP_Flash_Tool_v5.1516.00
A328_ROW_S329_150708
A328_ROW_S324_141116
Lenovo A328 ROW_S322_140822
Hello everyone!
I am facing the same problem!!! After apps crashing, no start, no charge.... PC can see the phone in device manager under Win 10/ Win 7... (MTK usb port and MTK vcom preloader port)
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
Related
I am using a lenovo p770 and today it froze... the screen was on but not responding..... so i pulled out the battery and now it doesnt even power up.... so i tried charging it and usually the indicator light glows red but now it did not... however when i pulled out the battery and continued the charging the red light came on..... and when i put the battery back in it turned off again... the phone is rooted so no warranty..... can neone help me out or at least point me in the direction of what might be wrong..... ???
i rooted the phone long time back.... abt 6 months ago and must have tried several custom roms several times.... all this while the phone was running fine.....
Thank you..
more info on the problem
Pls help...
I tried to use sp flash tools to flash the preloader....... when i connect the phone to the pc the mediatek vcom usb device is detected but as soon as sp flash tools try to write the device disconnects and i get the error that emmc not found.... i tried multiple times... i uninstalled old drivers and installed new drivers but everytime i get the same problem.... if i dont use sp flash tools then the device stays connected a little while longer but eventually disconnects within a minute....
so does the phone stand a chance of being repaired cause it gets detected at least even if its not powering up...??
I'll be trying to do the same on a completely fresh system till then ne ideas of what cld be wrong and wht cld i do to repair it would be nice.....
thank you....
Help-me I have Problem
I have a problem , when I try to Download the recovery.img , the green circle not showing , it is only an error message , under the device manager ... when I connect the phone , the computer recognize it but it is disabled after 2 second , ... and the process fails .
is there any solution for the driver disconnection ?
Hello
I have a phone ZOPO C2 VER B. Phone turned off and do not ever want to turn on. It stopped responding to the charger, do not give any sign of life.
When connected to computer detects the phone, installs the drivers, the SP FLASH TOOL it detects. I pulled a few ROMs and I can not upload any ROM. It is always like this: It comes to 100% red belt and that's it. No error. The phone is detected as the MTK PORT, sometimes after reaching the 100% change in VCOM MediaTek USB DA. Here I give a link to the video where you can see how it looks. https://www.youtube.com/watch?v=6Iospu3n0oU&feature=youtu.be
I tried to upload separately preloader, recovery boot. Always the same ending. I tried with the battery in the phone, without the battery, hold Vloume - + Power, etc. Nothing gives all the time is the same.
Use three other PC to try. I have one more phone Zopo and on the same computer and the same driver is dowload rom with SFP without problems.
Phone is brick or can fix this?
Sorry for my english is bad
I am having the same problem, until now could not solve.
I am having a problem with my huawei honor 3c, I think it is bricked.
In brief, my phone won't start up no matter what I do, the display is completely shut off, the pc doesn't recognize the phone and it only flashes a red led for one second as soon as it's connected to the pc (without the battery), then nothing more happens.
I reinstalled the drivers and changed the usb cable but it's still not working.
it all happened when I was flashing a ROM using the sp flashtool, it was working fine but as soon as I disconnected the phone and reconnected it back to the computer, it didn't work anymore.
may someone please help?
same here but I was trying to install kitkat with emiu 2.3 Chinese firmware to my international version
now it's dead
did u find anything, pls
Hi, my device suddenly stopped working, I kept it to charge over night and in the morning, problem started
So i ordered a new battery but still nothing.
I think that phone is bricked
Simply no response, twrp or fastboot, nothing
The problem is that i need my data from the phone, i have set backup every friday it hapened in thursday - so i will loose som of my data
What i should use? SP flash tool or MI flash tool, or chinese miracle?
Repair me if i wrong with something.
When i unplug the battery. phone will connect to PC but after few seconds it will automaticaly disconnect,
I've installed Mediatek DA USB VCOM drivers - but there is yellow triangle when i connect phone to PC it will recognise it as - Mediatek USB port
Thanks for any help.
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Clean flash fastboot rom.
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Black_Stark said:
Clean flash fastboot rom.
Click to expand...
Click to collapse
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
ivdamke said:
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Click to expand...
Click to collapse
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
big tuna said:
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
Click to expand...
Click to collapse
I haven't tried turning on the phone without battery. I bought a new battery online for replacement, and then my phone turned on normally.