Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Clean flash fastboot rom.
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Black_Stark said:
Clean flash fastboot rom.
Click to expand...
Click to collapse
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
ivdamke said:
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Click to expand...
Click to collapse
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
big tuna said:
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
Click to expand...
Click to collapse
I haven't tried turning on the phone without battery. I bought a new battery online for replacement, and then my phone turned on normally.
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Hi,
I got my new phone a couple of days back, installed CM13 (officially unlocked, did that with TWRP + install ROM) probably incorrectly because i couldn't get the fingerprint sensor and other stuff to work at all.
Today my phone turned off by itself with around 70% of battery left and it's not responding anymore. Cannot go into Recovery mode, not even to Fastboot. Connected it to the charger and have the red light of the devil blinking... Tried to do everything i found online but i couldn't get into EDL mode (and then Flash through MiFlash), since fastboot is not working at all.
I really don't wanna have to open the back of the phone and. What can i do to save the phone? Is there any proven solution and a comprehensive guide to this (for a total idiot like me)?
Yes there is deep flash cable method search on xda/youtube it works like a charm,😉, this method saved me once
Try this (http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055) works 100%
Try to disconnect and reconnect the battery.
This has kicked me into EDL mode once and after flashing it was fine
Both methods are sound, but if you decide to remove the back cover, remember to eject the SIM card tray first
Thanks for the replies, i was hoping i wouldn't have to have to open the back cover and disconnect the battery but it seems to be the only option at this point.
The deep flash cable doesn't seem that difficult tho, why don't you give it a shot? It seems like that's what they use at MI service centres after all.
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device, but when i try to flash a stable MIUI rom i get an error: "Write timed out" as many times i tried to do it.
Does anybody have a suggestion?
My device was unlocked officially and i have no recovery no fastboot nothing at all.
alphax_ said:
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device,
Click to expand...
Click to collapse
Which method you used - Deep Flash cable or Battery disconnect?
Yeah sorry i did not mention it, disconnected the battery.
i tried the battery removing method but the phone is not responding
now need to try cable method
Ryan Raghendh said:
i tried the battery removing method but the phone is not responding
now need to try cable method
Click to expand...
Click to collapse
Get into EDL
This morning I decided I'd try to install CM14.1 instead of what I was running at the time, MIUI8. I must have flashed the wrong Official ROM and everything has gone downhill since then. I've also asked reddit for some advice and was told to install official developer ROM through EDL. That has been my goal for the last few hours but I haven't managed to do it yet. I believe I am accessing EDL but I don't really know how to tell, through Device Manager I see "Qualcomm HS-USB Diagnostics 900E (COM3)" but cannot flash through MiFlash as no device appears. When I am in fastboot I can see my device through MiFlash but cannot flash anything to it as I get "mismatching image and device" even though I am 95% sure that this is the correct ROM I should be flashing.
Please help I am beginning to stress out, any questions I will answer them quickly!
You must flash in edl mode
How to get from fastboot to edl
http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
mar.ur said:
You must flash in edl mode
How to get from fastboot to edl
http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
Thanks for the post, unfortunately I am having troubles getting into EDL. With the program you just linked I get stuck at "< waiting for device >". I believe there could be some driver issues as I am getting 900E and not 9008.
you need a deep flash cable for that...
here you go,
http://en.miui.com/thread-310325-1-1.html
This one is a little bit tricky but quicker and less aggressive way.
http://en.miui.com/thread-380827-1-1.html
This one is easier but you will have to sacrifice one of your USB cable ( if you have an extra one lying around)
Personally first one worked for me well..
Hit thanks if this helped.
I have tried with the deep flash cable, no luck. The second link talks about browsing to the correct drivers.. where do I get these, what is he talking about?
follow this method , drivers must be installed properly
http://en.miui.com/thread-235865-1-1.html
mar.ur said:
follow this method , drivers must be installed properly
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
How do I start fresh? I've already got drivers that will interfere. As in, he says "Phone will be detected as QHUSB_BULK" where for me it's being detected already as the 900E one.
since you have installed a wrong rom package,you device name and status get changed. during flashing from mi flash choose to clean all. always use miflash beta
gaurav1322 said:
since you have installed a wrong rom package,you device name and status get changed. during flashing from mi flash choose to clean all. always use miflash beta
Click to expand...
Click to collapse
Okay I will remember that when I get to the point of flashing but I think that is still quite far away.
Sivi.N4 said:
How do I start fresh? I've already got drivers that will interfere. As in, he says "Phone will be detected as QHUSB_BULK" where for me it's being detected already as the 900E one.
Click to expand...
Click to collapse
You can still try the "update driver" option...As after the driver installation windows refreshes the connection and if everything goes well..Your phone will be detected as 9008
You probably already know at this point, but if you don't, the notification LED on the device will flash red when you have successfully entered EDL mode.
You can try popping open the back cover(remember to eject the sim card tray) slowly(the fingerprint scanner is connected to the back), then unplug and replug the battery. It might help you boot to fastboot.
Hope this helps.
Good luck.
Ivanlai said:
You probably already know at this point, but if you don't, the notification LED on the device will flash red when you have successfully entered EDL mode.
You can try popping open the back cover(remember to eject the sim card tray) slowly(the fingerprint scanner is connected to the back), then unplug and replug the battery. It might help you boot to fastboot.
Hope this helps.
Good luck.
Click to expand...
Click to collapse
The notification LED blinks red anytime that the phone is connected to the computer so it is hard to tell whether I am in EDL mode or not. My main problem right now is that I can't seem to get the Device Manager to say 9008 instead of 900E and therefore I cannot see it in MiFlash. Anyone else have any suggestions?
Sivi.N4 said:
The notification LED blinks red anytime that the phone is connected to the computer so it is hard to tell whether I am in EDL mode or not. My main problem right now is that I can't seem to get the Device Manager to say 9008 instead of 900E and therefore I cannot see it in MiFlash. Anyone else have any suggestions?
Click to expand...
Click to collapse
I faced same issue I solved by tearing it down and use test points to get to edl
Hi, so I have encountered a rather big issue with my xiaomi redmi 3 pro.
I believe I have flashed wrong (corrupted ? ) ROM, now I have a really annoying situation.
So, I flashed " ido_xhdpi_images_V7.2.6.0.LHPCNDB_20160129.0000.14_5.1_cn " in MiFlash, took a bit long time (nearly 15 minutes), afterwards it was completed, I disconnected my phone, and *BOOM* since then, black.
Current situation is this: When I connect my phone via USB, my phone gets recognized in device manager as
"Qualcomm HS-USB QDLoader 9008 (COM#)", also it gets recognized in MiFlash, but can't get it to work in fastboot, and it is not recognized as adb device. So, throughout 3 days now, I tried nearly EVERYTHING I have found on forums. The only thing I have not done is to take the back cover off and disconnect battery ( as I have seen on forums), tried with deep flash cable, all possible combinations of buttons and all. If the phone is connected to PC, when I press whatever combination of buttons on phone I just get Windows sound for connecting an USB device.
So today, when I connected it, red LED light was blinking, I have no idea what that was, so I plugged it into the wall to charge for 10mins, and now when I connect it, it's gone again, all black, no response whatsoever.
So, when I connect it to MiFlash and try to flash any ROM, tried nearly everyone I found, I get the same message; "Unspecified error 0x80004005; End Transfer packet id0, status 9" if I refresh MiFlash without disconnecting, and press flash again I get "Reached the end of the file. (0x80070026; Receiving hello packet) "
Things maybe to mention: I am running a 64 bit Windows 10, and my bootlocker is locked.
So I am wondering, if there is any possible way to solve this or it's time for a new phone?
alchzor said:
Hi, so I have encountered a rather big issue with my xiaomi redmi 3 pro.
I believe I have flashed wrong (corrupted ? ) ROM, now I have a really annoying situation.
So, I flashed " ido_xhdpi_images_V7.2.6.0.LHPCNDB_20160129.0000.14_5.1_cn " in MiFlash, took a bit long time (nearly 15 minutes), afterwards it was completed, I disconnected my phone, and *BOOM* since then, black.
Current situation is this: When I connect my phone via USB, my phone gets recognized in device manager as
"Qualcomm HS-USB QDLoader 9008 (COM#)", also it gets recognized in MiFlash, but can't get it to work in fastboot, and it is not recognized as adb device. So, throughout 3 days now, I tried nearly EVERYTHING I have found on forums. The only thing I have not done is to take the back cover off and disconnect battery ( as I have seen on forums), tried with deep flash cable, all possible combinations of buttons and all. If the phone is connected to PC, when I press whatever combination of buttons on phone I just get Windows sound for connecting an USB device.
So today, when I connected it, red LED light was blinking, I have no idea what that was, so I plugged it into the wall to charge for 10mins, and now when I connect it, it's gone again, all black, no response whatsoever.
So, when I connect it to MiFlash and try to flash any ROM, tried nearly everyone I found, I get the same message; "Unspecified error 0x80004005; End Transfer packet id0, status 9" if I refresh MiFlash without disconnecting, and press flash again I get "Reached the end of the file. (0x80070026; Receiving hello packet) "
Things maybe to mention: I am running a 64 bit Windows 10, and my bootlocker is locked.
So I am wondering, if there is any possible way to solve this or it's time for a new phone?
Click to expand...
Click to collapse
Hello,
I will move your thread to the correct section so that the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.
Hi, sorry to hear that happened to you. I suggest you to post this on Xiaomi reddit page, so more people can help you. Here is the link:
https://www.reddit.com/r/Xiaomi/
I have this Lenovo A328 which suddenly had multiple and continuous gallery crashes. I tried to do a factory reset but get bootloop.
I decided to flash the stock rom using SP Flash Tool. The battery was charged ~ 50% Flashing the stock rom i always get s_da_mt_dedicated_pattern_error (3094) After 2-3 attempts nothing changed, still bootloop. After the next 2-3 attempts the phone stopped turning on and charging. I assumed that the case is in a discharged battery. It was really in her. The battery discharged to 3 volts so i asked my friends to charge it.
After the battery has been charged nothing has changed, the phone still does not turn on or vibrate.
Using SP_Flash_Tool_v5.1352.01, I formatted the flash. I downloaded the Lenovo A328 ROW_S322_140822 and flashed it. The result is OK, but the phone still does not turn on or charge. I tried every possible combination: format all+download, download only, auto format flash, manual format flash.
Any idea on this one?
Software & Firmware used:
SP_Flash_Tool_v3.1336.0.198
SP_Flash_Tool_v5.1352.01
SP_Flash_Tool_exe_Windows_v5.1520.00.000
SP_Flash_Tool_v5.1516.00
A328_ROW_S329_150708
A328_ROW_S324_141116
Lenovo A328 ROW_S322_140822
Hello everyone!
I am facing the same problem!!! After apps crashing, no start, no charge.... PC can see the phone in device manager under Win 10/ Win 7... (MTK usb port and MTK vcom preloader port)
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???