I am having a problem, Huawei honor 3c - Android Q&A, Help & Troubleshooting

I am having a problem with my huawei honor 3c, I think it is bricked.
In brief, my phone won't start up no matter what I do, the display is completely shut off, the pc doesn't recognize the phone and it only flashes a red led for one second as soon as it's connected to the pc (without the battery), then nothing more happens.
I reinstalled the drivers and changed the usb cable but it's still not working.
it all happened when I was flashing a ROM using the sp flashtool, it was working fine but as soon as I disconnected the phone and reconnected it back to the computer, it didn't work anymore.
may someone please help?

same here but I was trying to install kitkat with emiu 2.3 Chinese firmware to my international version
now it's dead
did u find anything, pls

Related

Zopo C2 brick, please help.

Hello
I have a phone ZOPO C2 VER B. Phone turned off and do not ever want to turn on. It stopped responding to the charger, do not give any sign of life.
When connected to computer detects the phone, installs the drivers, the SP FLASH TOOL it detects. I pulled a few ROMs and I can not upload any ROM. It is always like this: It comes to 100% red belt and that's it. No error. The phone is detected as the MTK PORT, sometimes after reaching the 100% change in VCOM MediaTek USB DA. Here I give a link to the video where you can see how it looks. https://www.youtube.com/watch?v=6Iospu3n0oU&feature=youtu.be
I tried to upload separately preloader, recovery boot. Always the same ending. I tried with the battery in the phone, without the battery, hold Vloume - + Power, etc. Nothing gives all the time is the same.
Use three other PC to try. I have one more phone Zopo and on the same computer and the same driver is dowload rom with SFP without problems.
Phone is brick or can fix this?
Sorry for my english is bad
I am having the same problem, until now could not solve.

Having a bit of trouble with Flashtool and Windows 10. Please advise

Hello guys,
I am having trouble with my Xperia Mini Pro phone. Yesterday it suddenly switched off and it is not switching on after that. When I connect it to my laptop, the red LED flashes indicating that its charging, however when I connect with Volume Down and Insert the USB for Fastboot mode, there is no blue light and Windows 10 shows error "USB Device not recognized". I reinstalled flashtool after that as I thought it was giving me problems yet the problem persists. What driver do I need for Xperia Mini Pro? Using 0.9.22.3 version of Flashtool. I have unlocked bootloader and I was using Pac Man Rom on it. Nothing else. Currently nothing is working on my phone, flashmode, fastboot mode, CWM etc nothing is working. Only the red LED blinks when I connect to PC or when I am charging.
Is this a soft brick? and how do I fix it? I only use Flashtool and not the companion software. Please guide me, using this phone for past couple of years and I want to use it for some more time.
Thank you.
Felix-Senpai said:
Hello guys,
I am having trouble with my Xperia Mini Pro phone. Yesterday it suddenly switched off and it is not switching on after that. When I connect it to my laptop, the red LED flashes indicating that its charging, however when I connect with Volume Down and Insert the USB for Fastboot mode, there is no blue light and Windows 10 shows error "USB Device not recognized". I reinstalled flashtool after that as I thought it was giving me problems yet the problem persists. What driver do I need for Xperia Mini Pro? Using 0.9.22.3 version of Flashtool. I have unlocked bootloader and I was using Pac Man Rom on it. Nothing else. Currently nothing is working on my phone, flashmode, fastboot mode, CWM etc nothing is working. Only the red LED blinks when I connect to PC or when I am charging.
Is this a soft brick? and how do I fix it? I only use Flashtool and not the companion software. Please guide me, using this phone for past couple of years and I want to use it for some more time.
Thank you.
Click to expand...
Click to collapse
Sounds like a battery problem. Try to use original charger (from a wall socket - at least 15min). A wall socket can deliver twice as much power as a USB port. So if your phone is charging slowly and you're connected to pc: there's your problem.
Shinoks said:
Sounds like a battery problem. Try to use original charger (from a wall socket - at least 15min). A wall socket can deliver twice as much power as a USB port. So if your phone is charging slowly and you're connected to pc: there's your problem.
Click to expand...
Click to collapse
Hello. I tried this and it didn't work. I have my phone charging for over an hour now and it still is not booting. My phone vibrates when booting and I don't get that vibration anymore
Any other help?
Any help regarding this? Still haven't been able to fix it

Lenovo A328 Not Charging Not Booting Bricked

I have this Lenovo A328 which suddenly had multiple and continuous gallery crashes. I tried to do a factory reset but get bootloop.
I decided to flash the stock rom using SP Flash Tool. The battery was charged ~ 50% Flashing the stock rom i always get s_da_mt_dedicated_pattern_error (3094) After 2-3 attempts nothing changed, still bootloop. After the next 2-3 attempts the phone stopped turning on and charging. I assumed that the case is in a discharged battery. It was really in her. The battery discharged to 3 volts so i asked my friends to charge it.
After the battery has been charged nothing has changed, the phone still does not turn on or vibrate.
Using SP_Flash_Tool_v5.1352.01, I formatted the flash. I downloaded the Lenovo A328 ROW_S322_140822 and flashed it. The result is OK, but the phone still does not turn on or charge. I tried every possible combination: format all+download, download only, auto format flash, manual format flash.
Any idea on this one?
Software & Firmware used:
SP_Flash_Tool_v3.1336.0.198
SP_Flash_Tool_v5.1352.01
SP_Flash_Tool_exe_Windows_v5.1520.00.000
SP_Flash_Tool_v5.1516.00
A328_ROW_S329_150708
A328_ROW_S324_141116
Lenovo A328 ROW_S322_140822
Hello everyone!
I am facing the same problem!!! After apps crashing, no start, no charge.... PC can see the phone in device manager under Win 10/ Win 7... (MTK usb port and MTK vcom preloader port)
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???

Bricking the phone, please helpp !!

Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!

successfully flashed MTK version with SP flash tool. My phone wont turn on

Hello following this guide (http://en.miui.com/thread-193681-1-1.html) i tried to revive my phone but now he wont turn on and when i connect it to my PC it either connects/dissconects over and over again or windows says that the usb port was not recognised. I tried charging the phone for 24 hours but the phone doesnt react to charger and it didnt help. Any idea what might be going on?

Categories

Resources