Hi, i search the way to connect to my school network, there's are no protection but nobody can connect to WiFi.. But The school PC are connected yet. I found file of the network config on my prof USB drive and i take a pic.. I tried to connect my phone with these settings but nothing.. Can anybody help me??
txt file is a wired configuration with static ips.
if wifi config is even, you just need the right ip/subnet. maybe you can portscan it.
Related
hi! i was just wondering if anybody knew a way of getting messenger to connect over a lan, or internet explorer to connect over a lan? i have my xda setup to connect via gprs, but not as a standard connection. so whenever i try to use IE or messenger it doesnt recognise the connection. i can get the ezwap to work, because i could change the setting on it to connect over a lan, but i cant find anywhere to change the others.
thanks
Go into active-sync on your PC. (I assume you mean using you PC LAN). Then go into options -> Rules.
In Pass through, choose Connection: The Internet.
This should do what you want.
basically what it is is, im using a seperate dial up connection via gprs which IE and messenger dont recognise and dont think theres a connection. can i change the settings in the registry to get them to only connect via a lan, i.e. piggy backing over the connection i have.
thanks
How did you get yours working with ISP, I have made number of trials. No, luck et all. I can not internet/isp/gprs working. By the way I am on another network than I originally purchased. So neither of them giving any support.
Thanks.
sometimes you have to reconnect in to the cradle to get it working
Hi Guys. Need a little help.
Scenario: I have a wired ADSL connection in my home for internet. I have Windows 7 on my PC installed. I have a TP-Link TL-WN321G WiFi card in my PC as well.
Now, I want to share my PC's ADSL connection with my Vibrant through my WiFi card.
So far, I have failed to achieve it. I have tried doing it the TP-Link way by establishing a Soft AP through a software provided by them, but no success. I have tried connectify, no luck here either. My vibrant detects the network but never connects to it...
Any help, what so ever will be really appreciated...
Easiest way, get a $30 router at your local store. Will save you a headache. Otherwise bridge your wired and wireless connection using windows.
Sent from my SGH-T959 using XDA App
Well what you will need to do is allow ICS (Internet Connection Sharing) on the wired NIC card and allow other users to share the connection. It should DHCP the wired NIC and assign your wireless card an IP address like 192.168.137.1 and Subnet of 255.255.255.0.
Actually I don't want to buy a new router, want to use my WiFi card. And it is possible through it, so I think I should not spend money on a router...
I have tried everything... ICS is not working... Connectify is not working either...
There is some way of doing it through Adhoc network, I read somewhere but I have also read that Adhoc network is not supported in Android...
If someone can help, that would be great...
Odd because I'm doing ICS via Windows 7 and mine works perfectly..
***Edit...you might have to add in the default gateway ip and primary dns server ip on the wireless card for it to look for your wired NIC
just right click on your wired NIC and go to status and then details
Hmm... I am going to try this but do I share the internet with my WiFi card or the Virtual WiFi Miniport?
You share the wired NIC "allow other users to connect " it will act as your DHCP server and assign an address to your wireless card
Nothing is happening for me...
My Vibrant detects the WiFi AP but does not connect to it... It evens show the signal strength to be "Excellent" but does not connect to it...
Man... Its really frustrating when you can not get something to work...
So it just wont connect period?? Not even to network? Or will it connect and just no internet.... Hmmmmm
It just wont connect. Period...
Thanks for your willingness to help though...
Google "set up adhoc windows 7" to get your wireless set up properly, then should be easy. Keep it simple at first. Broadcast ssid and one you will recognize, and no password to eliminate any problems. Once configured and workinggo back and set up a password.
Sent from my SGH-T959 using XDA App
I have tried this Ad Hoc connection as well but I have read somewhere that Android does not support Ad Hoc connection. If there is some way around, please do tell me...
Finally... Got it working guys...
Here is the link: http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/
Followed it and it just worked...
Man, I am relieved...
ok i can install all fo the tether apks (obviously not all at once) and they all seem to work fine and my computer recognizes the phones network and the phone shows that its sending data to the computer when talking to it to connect but then says unidentified network no internet access. so they talk to each other but the phone isnt passing on its connection. any idea how i can fix this?
maybe some setting i need to change?
SEARCHED FOR HOURS AND NO ONE COULD FIX THIS FOR ME. WHO WOULD HAVE GUESSED SOME LITTLE KID WOULD NAIL IT.
http://www.youtube.com/watch?v=Y_38AoVtj50
NETWORK AND SHARING>WIRELESS NETWORK CONNECTION>PROPERTIES> CLICK INTERNET PROTOCOL VERSIONS> PROPERTIES> CHANGE TO AUTOMATICALLY AQUIRE IP
REPEAT FOR VERSION 6 ALSO
Does anyone know if it's possible to get internet from my computer to the vibrant via bluetooth? To be clear, I do NOT want 2G/3G on my computer, I want to share my LAN connection with my phone. I'm deployed to Iraq and I have a wired connection to my computer that I want to share with my phone. I've tried connectify and similar options but they don't seem to work. I've got XP and 7 on the laptop, so if there's an option for either it'll work.
Thanks in advance.
Using bluetooth would be slow. You'll want to create an adhoc wireless network on your computer. Here's how to in XP:
http://www.labnol.org/software/ad-hoc-wireless-network-in-windows-xp/11486/
Edit: This is, if you have wireless on your computer.
Hi,
I have a Sony VAIO with Windows 7 & DLNA.
I have a Galaxy S2.
What i dont have is a WiFi Router. I am yet to get it.
Can anyone tell me if its possible to connect my laptop and Phone somehow without a Wifi router?
I was reading that I can transfer I could transfer file to phone without USB connection. Not sure how
Also Can i create a HotSpot in phone and make the PC connect to that Wifi hotspot?
I tried Connectify on Windows 7 but it never worked. It was never able to create a network for some reason
Thanks and looking forward for your inputs
galaxyII said:
Hi,
I have a Sony VAIO with Windows 7 & DLNA.
I have a Galaxy S2.
What i dont have is a WiFi Router. I am yet to get it.
Can anyone tell me if its possible to connect my laptop and Phone somehow without a Wifi router?
I was reading that I can transfer I could transfer file to phone without USB connection. Not sure how
Also Can i create a HotSpot in phone and make the PC connect to that Wifi hotspot?
I tried Connectify on Windows 7 but it never worked. It was never able to create a network for some reason
Thanks and looking forward for your inputs
Click to expand...
Click to collapse
Go to settings -> Wireless and network -> Tethering and portable hotspot -> Then select "Portable Wi-Fi hotspot settings" - From this you can set up a Wi-Fi network that uses your mobile internet.
Once you've set this up connect to the wireless network via your laptop and launch the app called "Kies air". From there you can transfer files without the need of the usb connector...
To use DLNA you need a wireless network, i wouldn't recommend using the portable Wi-Fi hotspot for it.
Thank you very much Stylee32 this helps
hope i will get my WiFi router soon
Edit: I tried this solution. Got my PC connected to Mobile. But the url which Kies Air gave didnt work
Edit 2: Finally it worked. Thank you so much
No problem at all, glad i could help