[WIP/TESTING] CM11 SM-T531/535 3G / LTE | MultiROM [flashjunkies] - Galaxy Tab 4 Android Development

Tab 4 10.1 3G - SM-T531 (matisse3g)
Primary Testing Modem / RIL
please do a dmesg of your current rom with working ril and a logcat -b radio
if possible with sim check at boot and doing a call.
do the same with the testrom installed.
paste your logs @ http://logcat.scheffsblend.com/logcat_submit.html and post the link. :good:
Source: GitHub
Download: here
Tab 4 10.1 LTE - SM-T535 (matisselte)
Alternative Kernel
Primary Testing Modem / RIL
please do a dmesg of your current rom with working ril and a logcat -b radio
if possible with sim check at boot and doing a call.
do the same with the testrom installed.
paste your logs @ http://logcat.scheffsblend.com/logcat_submit.html and post the link. :good:
Source: GitHub
Download: here
MultiROM Tab 4 10.1 WIFI - SM-T530 (matissewifi)
if there is someone out there making our kernel kexec hardboot ready, here is a working TWRP and MultiROM to test your work.
Source: GitHub
Download: here

Will be first . I copy and translate post from our 4pda.ru user Bexer :
Downloaded CM11 matisse3g t531, when i install writes the firmware for matisse3g, your device matisse WiFi. What does it mean? I t531 with 3g

Device t531 Firnware matis3g

BexeR said:
Device t531 Firnware matis3g
Click to expand...
Click to collapse
ok, its fixed. pls download file again or comment out line 1 to 5 in the updater script-
matisselte fixed, too. consumerir mod. was missing.

Download again file, but nothing changed. You forgot to upload again.

BexeR said:
Download again file, but nothing changed. You forgot to upload again.
Click to expand...
Click to collapse
retry. matisse3g, lte is done - no ril

repey6 said:
Will be first . I copy and translate post from our 4pda.ru user Bexer :
Downloaded CM11 matisse3g t531, when i install writes the firmware for matisse3g, your device matisse WiFi. What does it mean? I t531 with 3g
Click to expand...
Click to collapse
TARGET_UNIFIED_DEVICE at twrp config not set. so it took product fingerprint from the buildinfo.sh instead of init.c.

Instaled! I've got a new problem, Infinitely loaded

BexeR said:
Instaled! I've got a new problem, Infinitely loaded
Click to expand...
Click to collapse
http://metal-build.de/sub77/matissewifi/blisspop/misc/consumerir.msm8226.so -> cp to /system/lib/hw/ & chmod 644

File upload, nothing changed.. (

BexeR said:
File upload, nothing changed.. ([/QUOTE)
the roms posted in here are just for getting gsm and lte working.
Click to expand...
Click to collapse

@sub77
nice to see this again!
"if there is someone out there making our kernel kexec hardboot ready, here is a working TWRP and MultiROM to test your work."
So this means i cannot try it with the normal CM11 build? The kernel CM11 needs to be changed for this?

Droidphilev said:
@sub77
nice to see this again!
"if there is someone out there making our kernel kexec hardboot ready, here is a working TWRP and MultiROM to test your work."
So this means i cannot try it with the normal CM11 build? The kernel CM11 needs to be changed for this?
Click to expand...
Click to collapse
yes. The kernel of the primary rom need to be patched.
you can check multisystem untill multirom works.

Hi,
sub77 said:
yes. The kernel of the primary rom need to be patched.
you can check multisystem untill multirom works.
Click to expand...
Click to collapse
Would you mind to give a small tutorial? I did a seach but i don't know where to start.

[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android
Q/A1
Q/A2

sub77 said:
[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android
Q/A1
Q/A2
Click to expand...
Click to collapse
Well i have found this thread too but:
-do i need any of your tools or is it completely a different way to dualboot?
-sm-t530 is not on the compatible list in that thread.

NEW TEST MATISSELTE:
cm-11-20150519-UNOFFICIAL-matisselte.zip

i got the sm-t531 3G stuck on KNOX warranty void, anyone got a fix for this? Is there any working rom for it ?
it had this earlier before i tried to put another rom in it.
Baseband T531XXU0ANB7
Kernel ; 3.4.0-825281-eng
[email protected] #1
Build number
matise3gxx-eng 4.4.2 KOT49H T531XXE0ANB7 test-keys

Internetwork said:
i got the sm-t531 3G...Is there any working rom for it ?
it had this earlier before i tried to put another rom in it.
Baseband T531XXU0ANB7
Kernel ; 3.4.0-825281-eng
[email protected] #1
Build number
matise3gxx-eng 4.4.2 KOT49H T531XXE0ANB7 test-keys
Click to expand...
Click to collapse
Use Odin to update to lollipop, then check out either BlissPop or SlimSaber

Any idea how to update the kernel ?

Related

[ROM][KVT49L]AOSP 4.4.2 from source (Alpha 01)

The reason I post my ROM here is because I'm soon starting with a new rom, broodROM KitKat which will also be available for the Note 3, So I figured why not test it on my current AOSP ROM (to see if there is any trouble on compiling, but no!). This AOSP is based on the real Google AOSP, no real further modifications (only thing is that it includes DeviceSettings from the S4 currently), and AppOps is exposed. that's all.
It includes the stock CM11 kernel (which is kinda crappy). but I don't have the device so cannot make decent kernel myself without testing. Also the ROM is 100% untested. but it compiled without any error with my sources (www.github.com/AOSP-S4-KK) so I think it's alright.
Working List
- You tell me I have no idea :silly:
Download Alpha 1
www.broodplank.net/files/AOSP-442-N9005-Alpha-1.zip
on alpha 01 you need to flash a custom kernel
SEND ME LOGCAT! BECAUSE CURRENTLY IT SEEM TO BOOTLOOP
The device name is listed as hlte in settings / build.prop, don't worry this is actually hltexx
Download Gapps Lite + SuperSU (yes it's not rooted by default, I recommend installing this package)
http://broodplank.net/files/gapps-4.4.2-lite-with-supersu-1.86.zip
Sources
- https://github.com/aosp-s4-kk
Download:
Code:
mkdir ~/AOSP
cd ~/AOSP
repo init -u git://github.com/AOSP-S4-KK/platform_manifest -b kk-4.4
repo sync
Building:
Code:
. build/envsetup.sh
lunch
make otapackage
reserved1
Sweet man!! Thanks always looking for something new to flash lol downloading now
Sent from my iPad using Tapatalk
Downloading!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Thankyou OP
anybody that has tried this, can you let me know if the temp/humidity sensors are still working after a few hours? as with other cm roms they stop working for me
Awesome Broodplank! Just switched from the Galaxy S Plus to the Note 3, always enjoyed your roms on there. Will try out this one! Keep up the good work
Sent from my SM-N9005 using xda app-developers app
Flashed and it went straight into Odin mode and said "Could not do normal boot" - I'm on the new Kitkat bootloader.
radicalisto said:
Flashed and it went straight into Odin mode and said "Could not do normal boot" - I'm on the new Kitkat bootloader.
Click to expand...
Click to collapse
Lol what the hell, that's almost impossible that my rom triggered download mode XD.
But it could be true, I have no clue since I do not have the device. what you could try is using the boot.img & /system/lib/modules from CM11 nightly.
btw, just downloaded CM11 and noticed there are NO modules in the kernel of hltexx. this means the kernel I added will not boot most likely.
So please install this zip after installing the rom:
www.broodplank.net/files/aosp-442-hltexx-kernel.zip
broodplank1337 said:
Lol what the hell, that's almost impossible that my rom triggered download mode XD.
But it could be true, I have no clue since I do not have the device. what you could try is using the boot.img & /system/lib/modules from CM11 nightly.
btw, just downloaded CM11 and noticed there are NO modules in the kernel of hltexx. this means the kernel I added will not boot most likely.
So please install this zip after installing the rom:
www.broodplank.net/files/aosp-442-hltexx-kernel.zip
Click to expand...
Click to collapse
OK - will try again now and let you know :good:
and new bootloader ?
Just bootloops with that .zip you added.
I did however change your kernel zip after the bootloop and used - temasek's HLTE custom kernel - I am now on the Android start up screen you have added but it is stuck on there.
radicalisto said:
Just bootloops with that .zip you added.
I did however change your kernel zip after the bootloop and used - temasek's HLTE custom kernel - I am now on the Android start up screen you have added but it is stuck on there.
Click to expand...
Click to collapse
ok good, could you open up adb shell, and send me the logcat, since I have no idea what actually could be the cause atm.
Yup will do it shortly, just heading home now
Sent from my CM11 Kitkat powered N9005
radicalisto said:
Yup will do it shortly, just heading home now
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
Ok thank you very much, without some proper logcat I cannot fix anything since I don't have the device :silly:
Anyways, I think the problem won't be a serious one, since the rom has msm8974 support
www.broodplank.net/logcat for uploading logcats pls
broodplank1337 said:
Ok thank you very much, without some proper logcat I cannot fix anything since I don't have the device :silly:
Anyways, I think the problem won't be a serious one, since the rom has msm8974 support
www.broodplank.net/logcat for uploading logcats pls
Click to expand...
Click to collapse
Sorry I couldn't manage to get a logcat via ADB due to some kernel issues with connecting to the PC - I'll try again today. - Is It possible you are using the old CM sources rather than the unified build sources? - device changed from HLTEXX to HLTE
radicalisto said:
Sorry I couldn't manage to get a logcat via ADB due to some kernel issues with connecting to the PC - I'll try again today. - Is It possible you are using the old CM sources rather than the unified build sources? - device changed from HLTEXX to HLTE
Click to expand...
Click to collapse
This ROM is built from pure AOSP sources not CM.
Hope a working build comes up soon, really like pure AOSP ROMs!
gianton said:
This ROM is built from pure AOSP sources not CM.
Hope a working build comes up soon, really like pure AOSP ROMs!
Click to expand...
Click to collapse
Ah I dropped the herp a derp then hahah, Nah reason I thought that was because of the CM kernel used to boot it up. Thanks for correcting :good:
---------- Post added at 08:56 AM ---------- Previous post was at 08:55 AM ----------
@gianton it'll boot into splash screen with temasek's kernel, if you wanna try and grab an ADB Logcat? - I'm having issues getting one :crying:
Sorry for not providing a good kernel, the thing is I cannot compile it decently with the ROM. it says I have to add module support and recontinue, thing is, the note 3 does not use it. but my build forces it.. Anyone have experience on CM with compiling the kernel? (the kernel is from CM after all)
You could try temasek or Yank555 or wootever for help with kernels as they're pretty decent at them - civato knows his stuff also, however I believe he has only worked with Stock samsung kernels and not CM stuff.
Still cannot get ADB logcat, phone won't recognise in PC

[k3gxx][G900H][CWM Advanced Edition] PhilZ Touch

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just long press outside a menu (2 sec and slightly change pressure after the delay)
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Galaxy S5 Exynos - G900H (k3gxx)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/k3gxx
Click to expand...
Click to collapse
Thanks @Chenglu for parts of his ramdisk and his dtb tools
XDA:DevDB Information
[k3gxx][CWM Advanced Edition] PhilZ Touch, Tool/Utility for the Samsung Galaxy S 5
Contributors
Phil3759
Version Information
Status: Stable
Created 2014-04-17
Last Updated 2014-10-16
Status: stable
Galaxy S5 3G - SM-G900H
Tested and not working.
Its stays on logo of Samsung..
Airboner said:
Galaxy S5 3G - SM-G900H
Tested and not working.
Its stays on logo of Samsung..
Click to expand...
Click to collapse
Try this one, it worked for me:
g900h-cwm-recovery-6.0.4.7(0404).tar
@Phil3759 for your info, @Chenglu CWM for G900H runs without issues. Maybe you should check it to release another test file of your recovery.
Cheers,
djigane said:
Try this one, it worked for me:
g900h-cwm-recovery-6.0.4.7(0404).tar
@Phil3759 for your info, @Chenglu CWM for G900H runs without issues. Maybe you should check it to release another test file of your recovery.
Cheers,
Click to expand...
Click to collapse
I know
I just prefer using another approach
Stock kernel is too big in your case
Still waiting for someone providing results from:
Code:
cat /proc/partitions
I will try to compile a light version based on stock kernel this time, and debug it once it boots
djigane said:
Try this one, it worked for me:
g900h-cwm-recovery-6.0.4.7(0404).tar
@Phil3759 for your info, @Chenglu CWM for G900H runs without issues. Maybe you should check it to release another test file of your recovery.
Cheers,
Click to expand...
Click to collapse
Ok dude i will try it tomorrow and report cauze i go for sleep...
Phil3759 said:
I know
I just prefer using another approach
Stock kernel is too big in your case
Still waiting for someone providing results from:
Code:
cat /proc/partitions
I will try to compile a light version based on stock kernel this time, and debug it once it boots
Click to expand...
Click to collapse
Here it is, @Phil3759
Update v2
- use stock kernel
- handle dt.img
Click to expand...
Click to collapse
Download: http://d-h.st/2mx
Seems like exynos also has now a dt.img!
djigane said:
Try this one, it worked for me:
g900h-cwm-recovery-6.0.4.7(0404).tar
Click to expand...
Click to collapse
i tested and i confirm that it works
Airboner said:
i tested and i confirm that it works
Click to expand...
Click to collapse
Many thanks
I can now continue debugging and using a kernel compiled from source
Never thought exynos also would use separated dt.img to handle dtc info
Phil3759 said:
Many thanks
I can now continue debugging and using a kernel compiled from source
Never thought exynos also would use separated dt.img to handle dtc info
Click to expand...
Click to collapse
sry dude i didnt test yours,i tested the other recovery who the guy posted :/
however i dont know if its yours
Airboner said:
sry dude i didnt test yours,i tested the other recovery who the guy posted :/
however i dont know if its yours
Click to expand...
Click to collapse
hopefully I did not press the :good: button
Will wait for someone to flash v2
Phil3759 said:
hopefully I did not press the :good: button
Will wait for someone to flash v2
Click to expand...
Click to collapse
i will test it in few hours and i report back
It works... I flashed the zip from chenglu cwm recovery. Thank you @Philz3759. Maybe you should also provide an Odin .tar file for those who can't flash it from a previous cwm recovery (not already installed)
djigane said:
It works... I flashed the zip from chenglu cwm recovery. Thank you @Philz3759. Maybe you should also provide an Odin .tar file for those who can't flash it from a previous cwm recovery (not already installed)
Click to expand...
Click to collapse
Great and thank you
Once final, I will provide zip and tar
I will release a v3, a bit experimental, but hope it works
v3 experimental
http://d-h.st/rBr
I hope someone can test this experimental build
I used a prebuilt dt.img combined with a compiled kernel from source
v2 was fine but I prefer having a cleaner solution by building kernel from sources. The issue is that I did not find how to build the dt.img file as dtb files are not built during make provided by Samsung
At worst, it won't boot to recovery and you have to use odin to flash another recovery or previous v2
Phil3759 said:
v3 experimental
http://d-h.st/rBr
I hope someone can test this experimental build
I used a prebuilt dt.img combined with a compiled kernel from source
v2 was fine but I prefer having a cleaner solution by building kernel from sources. The issue is that I did not find how to build the dt.img file as dtb files are not built during make provided by Samsung
At worst, it won't boot to recovery and you have to use odin to flash another recovery or previous v2
Click to expand...
Click to collapse
OK, flashed. Unfortunatelly, phone during reboots were going straight into download mode with red info saying: "cannot boot normal mode" or similar.
restored previous revovery and all seems fine.
sebarkh said:
OK, flashed. Unfortunatelly, phone during reboots were going straight into download mode with red info saying: "cannot boot normal mode" or similar.
restored previous revovery and all seems fine.
Click to expand...
Click to collapse
Thanks
I was expecting it as dtb must be compiled along kernel
However, Samsung sources are not compiling the needed dtb files needed by dtbtool
I am trying to learn how to compile dtb files from the dts scripts along the zImage
However, without a guinea pig device, it is time expensive
Meanwhile, I will provide you with a decent build using a cracked adbd binary to have adb shell with root privileges
I notify @Chenglu as he did a huge work on the dtbtool part
Found this reading:
http://www.armadeus.com/wiki/index.php?title=Kernel-with-device-tree
Will work from there and try a v4 soon
I could generate the dtb files
However, there is only dtbTool for Qcom
Dropping this until we have more decent sources from a developer more used to kernels or Samsung releases info for it if not yet

[ROM][CM11][i9100] OpenPDroid-patched CyanogenMod 11 builds for Galaxy S II GT-I9100

Main thread: OpenPDroid patches for CyanogenMod 11
WARNING: OpenPDroid is not compatible with ART for now. disable ART before flashing. enabling ART will cause the device to fail to boot. if you enabled ART and are unable to boot, flash official CyanogenMod temporarily to be able to fix (will cause privacy leaks). or if you have ADB access in android or recovery, you can disable ART by using setprop or editing a file.
these are i9100 builds of CyanogenMod 11 patched with OpenPDroid. find them here.
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay.
update: i have published an OpenPDroid overlay for the i9100 build of CM 10.1.3 here (made with old Auto-Patcher).
update: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
note: OpenPDroid does not affect the recovery nor the kernel, you can use whatever you want.
CM11-M6 broke OpenPDroid patches, so i forked OpenPDroid to restore compatibility, fix several bugs and clean up the code. sources are here.
XDA:DevDB Information
CM11-OpenPDroid-i9100, ROM for the Samsung Galaxy S II
Contributors
Lanchon
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2014-07-16
Last Updated 2014-10-08
rom is uploading now, please wait a bit...
Features and screenshots mate
george_shudi said:
Features and screenshots mate
Click to expand...
Click to collapse
lol
google openpdroid and pdroid
Some screenshots and battery life will be welcome.
Thanks, will try soon .
sorry! i just found out that Dropbox suspended my public links due to too much traffic, i didn't know this could happen. i'll arrange an alternative asap.
danielk68 said:
Some screenshots and battery life will be welcome.
Click to expand...
Click to collapse
this is just nightly CM11 with openpdroid! screenshots and battery are exactly like CM's.
mate your roms are not working ,, even ur links are not working anymore.
george_shudi said:
mate your roms are not working ,, even ur links are not working anymore.
Click to expand...
Click to collapse
lol did you even read my previous to last post?
Lanchon said:
lol did you even read my previous to last post?
Click to expand...
Click to collapse
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
george_shudi said:
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
Click to expand...
Click to collapse
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Lanchon said:
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Click to expand...
Click to collapse
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
george_shudi said:
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
Click to expand...
Click to collapse
ok thank you. i dont have an i9100 so i can't test. that's why this rom is not in ALPHA but TESTING stage. i pulled the blobs from a non-local friend's phone over VPN and built. but i am running the hammerhead version and it works just fine (and so does openpdroid). i don't know why it may not be working. maybe that CM's nightly is bad. maybe there's something bad with my building (i strongly suppose nothing's wrong with openpdroid). maybe you didn't wipe or the download was busted. (there is *no* need to wipe coming from CM11.) if someone else confirms i will sync and rebuild and maybe build without patching to see if the output works. thank you!
Dropbox error 509
matias6142 said:
Dropbox error 509
Click to expand...
Click to collapse
files are now live again, sorry for the outage!
Lanchon said:
files are now live again, sorry for the outage!
Click to expand...
Click to collapse
images i don't see
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Lanchon said:
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Click to expand...
Click to collapse
the package is bad.
chuangdi said:
the package is bad.
Click to expand...
Click to collapse
crap!!! can you please describe in more detail?
i don't have an i9100, so i havent tested this build.
EDIT: i had a friend with an i9100 remotely connect to to my VPN, then had him enable root adb over net, then i picked the blobs from his phone with the standard script. there were no errors reported. maybe something went wrong???
2ND EDIT:
i think i know what can have gone wrong. he's running CM but infected's CM10.2 modded build. maybe i need to pick the blobs from someone running standard CM11.
does anybody running "stock" CM11 want to help? i'd need brief remote adb access. i think root is required to pick the blobs, but not sure.

Link {liquidsmooth} lollipop unofficial t0lte

This is build nightly port from build nightly for i605 by @TheBr0ken, first thank to him.
This thread only shared link again for every one and it only for any one need test because it still not yet stable (for i605)
Don't forget replace/edit file updater-script before flash it (can use file attachment below).
Link rom :
http://drdevs.com/devs/teamliquid/Nightly/Note_2_Verizon/LS-LP-v4.0-2014-12-13-liquid_i605.zip
Note : i already test it.
after install, reboot finish->wizad setup (keyboard auto show) enable wifi first then skip anyway.
next step : go to phone dial *#*#4636#*#* ->testing>phone information>LTE/GSM/CDMA auto (PRL) waiting the moment is data service network mobile show work ok.
not work : receive incoming call, NFC (maybe)...
Good basedband fix??
windows8k said:
Good basedband fix??
Click to expand...
Click to collapse
yep, fixed baseband for CDMA i605> receive in call not work, waiting build for t0lte
Where did you find this from? I have i605 and just wanted to follow it myself
This would be nice it could be ported to the I317 / or N7105 variants. I love using the LS 3.2 with a Nice Battery life.
Voyebanm said:
This would be nice it could be ported to the I317 / or N7105 variants. I love using the LS 3.2 with a Nice Battery life.
Click to expand...
Click to collapse
T0lte is N7105 so yeah go ahead
lowridincrew said:
T0lte is N7105 so yeah go ahead
Click to expand...
Click to collapse
I know that, but incoming calls dont work like the other versions now work for these variants.
Thanks anyway
http://drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/LS-LP-v4.0-2014-12-19-liquid_t0lte.zip
Site tolte upload.
Screenshota please? And function list is also welcome
http://www.drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/
12 23 update ..
Issues flashing 23/12 build with TWRP
Hi,
I tried flashing the 23/12 build yesterday using the TWRP 2.7.0.2 & IT didn't get through.... I checked file for Md5sum for both the ROM & gapps and they are not bad downloads....I never had any issues with the TWRP before for flashing AOSP or TW build of KitKat roms..
Anyone can suggest me some alternatives?
rojajimmy said:
Hi,
I tried flashing the 23/12 build yesterday using the TWRP 2.7.0.2 & IT didn't get through.... I checked file for Md5sum for both the ROM & gapps and they are not bad downloads....I never had any issues with the TWRP before for flashing AOSP or TW build of KitKat roms..
Anyone can suggest me some alternatives?
Click to expand...
Click to collapse
I suggest you use PHILZ Touch recovery-This is the one I use ans haven't had a problem.
http://forum.xda-developers.com/galaxy-note-2/development-n7105/recovery-t2849091
Sometimes TWRP can be tempermental. You can also update TWRP I believed their on version 2.8 now
Anyone knows if the dark UI can be disabled?
Binary_File said:
Anyone knows if the dark UI can be disabled?
Click to expand...
Click to collapse
why? lol
@sumer1 thank you mate... I will try in a bit using TWRP 2.8.1.0 (latest for t0lte again,) ..... Hopefully it will be sorted.... Will keep you posted....
Also I hope there are no major bugs so far.... Except the ones that exist on other lp ROMS....
rojajimmy said:
@sumer1 thank you mate... I will try in a bit using TWRP 2.8.1.0 (latest for t0lte again,) ..... Hopefully it will be sorted.... Will keep you posted....
Also I hope there are no major bugs so far.... Except the ones that exist on other lp ROMS....
Click to expand...
Click to collapse
TWRP updated to 2.8.3.0 and installed this rom perfectly as well as the other L-pop roms. Link below:
http://forum.xda-developers.com/showthread.php?t=1966105
how do you install apk's in liquidsmooth lollipop rom? it says file cannot be opened when i install apk. also file manager is missing.
Hey @Pr4MetheuS for T0lte I still see 2.8.1.0 only on the official TWRP page ....once I select the T0LTE device. on there I get all the Note 2 options. I then select N7105 and it shows 2.8.1.0 latest. I guess I well wait for official CM12 release. Thankfully Android OS has matured to a level where I can live with just one previous version...
I have a AOSP (slimkat) ROM and it is 4.4.4 so all good...
Thanks for the help.
rojajimmy said:
Hey @Pr4MetheuS for T0lte I still see 2.8.1.0 only on the official TWRP page ....once I select the T0LTE device. on there I get all the Note 2 options. I then select N7105 and it shows 2.8.1.0 latest. I guess I well wait for official CM12 release. Thankfully Android OS has matured to a level where I can live with just one previous version...
I have a AOSP (slimkat) ROM and it is 4.4.4 so all good...
Thanks for the help.
Click to expand...
Click to collapse
t-mobile GN2 is updated to 2.8.3.0 and should be fine to use with 7105. Of course, if your phone blows up or starts a nuclear war, it's not my fault.
windows8k said:
http://www.drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/
12 23 update ..
Click to expand...
Click to collapse
hi! this may sound silly but how do you install apks in LS lollipop? when i open an apk it say cannot open file. i have flashed the 12-23 version already, no luck. my device is n7105 on n7105xxufnd3 and i have philz 6.48.4, the latest i can find. tnx!

[5.1.1]Touchwiz [BETA]

Lollipop 5.1.1 by @SpamMachine XDA
Code:
[SIZE="3"]Your warranty is now void. I will not be responsible
for bricked android phones, dead sd cards,
or any happy ending with your device.
if you point that finger at me, I will destroy you![/SIZE]
Supported devices:
J5108---OK!
J510F---OK!
J510FN---OK!
J510M---Not Tested
J510MN---Not Tested
Bugs:
Wi-Fi (Suggest me for potential fix)
Installation:
1. Wipe everything except Internal, Sd card, USB OTG & System
2. Flash Rom, First boot will take 20minutes
3. Optional but not required, Flash preferred kernel (currently no working kernels for this rom)
Download Mega Folder
LL-KERNEL BETA_soon​
Thanks to:
@SpamMachine
@KingRaheel
@samsung for not shipping J5108 with MM
@Demicro
Hit thanks button if it worked ​
*Developement continued*
Code:
Changelog
V2.1 -- Coming soon!
- Full support for J510FN/GN/MN
- Wifi fixed
- Deknoxed
- init.d tweaks
- Debloated
- Kernel tweaks
- Build Prop
V2:
- Fixed blinking screen issue
- Fixed Brightness slider
- Full support for J5108
Wizardlysense said:
Code:
Changelog
V2:
- Fixed blinking screen issue
- Fixed Brightness slider
- Full support for J5108
Click to expand...
Click to collapse
What about J510H?
What difference in perfomance if compare with Android 6.0.1?
Valentyn474 said:
What about J510H?
What difference in perfomance if compare with Android 6.0.1?
Click to expand...
Click to collapse
Bit snappier but no wifi yet working
Wizardlysense said:
Bit snappier but no wifi yet working
Click to expand...
Click to collapse
What about gaming and antutu/geekbench score?
Some better or not?
Wizardlysense said:
Bit snappier but no wifi yet working
Click to expand...
Click to collapse
Take the WiFi module from /system/lib/modules/pronto/pronto_wlan.ko according to the kernel you're using and set the correct permission and reboot (usually it isn't required to reboot, but just in case).
E.g.: if you use J5108 kernel (boot.img), then take the WiFi module from it's rom.
That should work.
#Henkate said:
Take the WiFi module from /system/lib/modules/pronto/pronto_wlan.ko according to the kernel you're using and set the correct permission and reboot (usually it isn't required to reboot, but just in case).
E.g.: if you use J5108 kernel (boot.img), then take the WiFi module from it's rom.
That should work.
Click to expand...
Click to collapse
The same as I had told him. No one reported problems with Wi-Fi in H and 8
#Henkate said:
Take the WiFi module from /system/lib/modules/pronto/pronto_wlan.ko according to the kernel you're using and set the correct permission and reboot (usually it isn't required to reboot, but just in case).
E.g.: if you use J5108 kernel (boot.img), then take the WiFi module from it's rom.
That should work.
Click to expand...
Click to collapse
thanks, I will try that ASAP
Valentyn474 said:
What about gaming and antutu/geekbench score?
Some better or not?
Click to expand...
Click to collapse
I will test when I get wifi (hopefully) fixed
It stuck at boot screen. I'm waiting more than 40 minutes.
vickyvaidhy1 said:
It stuck at boot screen. I'm waiting more than 40 minutes.
Click to expand...
Click to collapse
Model please
I re-created this rom from J510MN lollipop firmware but it does not boot
J510fn
Screenshot please
vickyvaidhy1 said:
J510fn
Click to expand...
Click to collapse
it's weird cause I have J510FN too... is it FN/DS (Dual SIM)
PS: did you flash FN one not the J5108
Lollipop kernel 1.1 Beta
Possible wifi fix please try
I try to install the rom with the kernel you post...but sadly wi-fi isn't working...and i made all steps you told..wipe everything but not android secure and external sd...the rest i wipe
diego88it said:
I try to install the rom with the kernel you post...but sadly wi-fi isn't working...and i made all steps you told..wipe everything but not android secure and external sd...the rest i wipe
Click to expand...
Click to collapse
Yeah i would probably need modules from 5.1.1 lollipop (j510fn) but this device never had lollipop
Wizardlysense said:
it's weird cause I have J510FN too... is it FN/DS (Dual SIM)
PS: did you flash FN one not the J5108
Click to expand...
Click to collapse
screan please
neon28 said:
screan please
Click to expand...
Click to collapse
This rom is no longer supported due device incompatibility

Categories

Resources