I was just wandering is there any people out there using your S6 Edge completely naked(without screen protectors and/or cases)? What kind of lifestyle do you have and how's the phone? I plan to use it completely naked.
Thanks.
I would also do..but ATM I use a very small plastic case for the back...nothing on front..no scratches..
Alex-V said:
I would also do..but ATM I use a very small plastic case for the back...nothing on front..no scratches..
Click to expand...
Click to collapse
No not naked big ass rubber case and screen cover but I'm a builder so need it
Naked S6 edge feeling so good))) im use only naked phones)))
I've seen plenty of people say they have scratched theirs in there pockets, so mine is fully protected.
I have the Spigen that is TPU with gold trim
Mine got scratch... in my porch with some coins.. my mistake let it together... my edge only 3 weeks used... feeling down rite now.. i think gorilla 4 is tough enough. ....
Sent from my SM-G925F using XDA Free mobile app
I hate phone cases normally but I find the edge really uncomfortable in the hand and far too slippery! Ended up getting a Spigen hybrid crystal and it's actually quite nice. It doesn't make the phone look too tacky and it's slightly rubberised - saved me from dropping it a few times already!
I just use the full body cover. I was using a case, but once you cover up the front and back and sides, the grip of this thing is more then enough. I hate cases and I like the feel of the phone without it. So, that's just how I roll. I'm glad I put the protector on though, cause I've already seen scratches on the protector and a few dings/dents. Woudl rather replace the film for $10, then replace the damn phone.
Almost naked but I use a Skin on the back. I travel with my phone and am always on the move.
h t p s://slickwraps.com/natural-series-wraps-skins-for-samsung-galaxy-s6-edge.html
I always use the phones fully naked, and they all get scratches. My S6 Edge already have some scratches on the back, i just don't mind. I rather have some little scratches than have to use a screen protector, i hate the feeling of it.
About my life style, i do a lot of sports and stuff and the phone goes to bags, pockets, gets water sprays, a little rain, dirt , dust .. for my iphone i do use sometimes a Lifeprof case for extreme sports, for android phones they usually go naked because i change the device a lot so i don't buy cases for them. I never cracked a screen thought .
I'm using it naked as well. Important to make sure you always have a dedicated pocket for it.
I'm an indoor engineer, so the phone doesn't have the risk of dropping (unless I have butter fingers, but i don't). In my lab if it's not in my pocket, I put it on a non-slip mat.
I also have a Spigen slim armor which I use when I'm out cycling, misc sports or with the kids. 4 weeks now. Flawless
Mines naked. I figure I'd just be careful instead of compromising and not experiencing the phone as intended.
I'm looking into cases anyway though because I'm getting scratches on the bottom of the back. It hasn't even been a month so I could only imagine what it'll be in two years.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you all for your inputs. I decided to go with the Nilkin TPU case. It adds grip but looks like nothing is actually there. It is easy to remove when I like to use the phone naked. I have to wait for the Curved Crystal Screen Protector from Spigen to be available here until then I have to be careful. Sometimes I even put the plastic wrap from the box when I put it in a bag just to be sure. Lol.
No case, no front screen protector, just a back screen protector and a cotton pouch. I used this combo with my other glass phones an it worked out perfectly since I don't drop my phones
Sent from my YOGA Tablet 2 Pro-1380F using XDA Free mobile app
I got the S6 edge after shattering my totally naked Note 4. I was a bit crushed, especially since I got that 8 months ago after doing the same with the naked Note 3. So I vowed I would use protection this time. I bought the skinomi screen protector and the Spigen Ultra Hybrid for my S6E. I absolutely hated the skinomi. It made the screen feel and look disgusting. I'd rather break my screen and not have a phone than use that nasty thing. The Spigen case is ok, but it takes away from the beauty of the phone's curves. Also it seems to mainly protect the back of the phone, which is quite cheap ($30+ original oem). So I took that off too. I just need to be more careful *fingers crossed*.
Total naked for now. Got the Nillkin tempered glass back protector on the way and that's the only thing I will put on. It came with 2 protector for the camera lens as well. Need something on the back to prevent scratches from putting the phone on any surface.
Naked, I can't appreciate the phone all covered up.
Just want to ask now how is everyone doing with being naked especially on the front screen?
I will never use cases had a military drop tested case for my Nexus 5 and smash, maybe that one i had was a quality control issue ?
But i very much like Dbrand ?
Related
Hey all. I purchased the TryIt black leather flip case with the stand about 2 weeks ago off ebay $44.69 shipped. I honestly didn't like it at first but it has grown on me. It takes a while to get used to holding the phone with the case cover flipped back. My only real complaint is the sturdiness of the kick stand. Looking at the pictures on ebay, i thought the kick stand was metal. It actually is a cheap plastic stand that snaps off really easily. A little bit of pressure makes it come off, luckily it snaps back into place. The genuine leather gives it a nice feel. The ID/credit card slots are convenient. However, it can only hold up to 4 cards comfortably. The fitment of the case hugs the note perfectly with all holes aligned. Surprisingly it doesn't add much bulk. Enough rambling...now for the pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I717 using XDA
That's a bummer about the kickstand. How is the call quality with with the case closed and how easy is it to remove from the case itself?
CreekDirt said:
That's a bummer about the kickstand. How is the call quality with with the case closed and how easy is it to remove from the case itself?
Click to expand...
Click to collapse
call quality is fine with the case closed. i was thinking the caller would sound muffled, but they actually sound clear. removing the case seemed quite difficult at first, but after doing it several times, you get used to it. at first it seems like you will break the clip on liner but it actually is really durable.
I'm really digging the look of this case. How much was it?
CreekDirt said:
I'm really digging the look of this case. How much was it?
Click to expand...
Click to collapse
i got it off ebay $44.69 shipped. a lil pricey, but i say the black leather is what makes it worth it for me. ill add this info to the review. thanks for the reminder.
I'm thinking of ordering the non-flip version of this case. Does the top bezel touch the surface of the display at all? It looks like it only touches the sides. I want to add a Glas.t screen protector, but I don't want the case to touch it.
Also, how much size and weight does this add? Would you consider this a slim case (without the flip cover)? Thanks.
Budge said:
I'm thinking of ordering the non-flip version of this case. Does the top bezel touch the surface of the display at all? It looks like it only touches the sides. I want to add a Glas.t screen protector, but I don't want the case to touch it.
Also, how much size and weight does this add? Would you consider this a slim case (without the flip cover)? Thanks.
Click to expand...
Click to collapse
top bezel does not touch the surface. you will be fine if you order the glass screen protector.
it doesnt add much weight at all. i would consider it a slim case if it is the one without the flip cover.
Thanks. Does the bezel all you to place the phone face down without the display touching the table? It looks like the bezel might be slightly raised above the level of the display (not once the glas.t protector is on, though).
Budge said:
Thanks. Does the bezel all you to place the phone face down without the display touching the table? It looks like the bezel might be slightly raised above the level of the display (not once the glas.t protector is on, though).
Click to expand...
Click to collapse
the bezel is slightly raised, but its like half a mm. i still feel like the screen touches the table when on its face. i wouldnt recommend having the face down with this case.
I'm still thinking of getting this case. How is your holding up? Also, have you ever tried the Elago G4 or Rearth Ringke Slim? I'm curious how much thicker this case is over the others.
Budge said:
I'm still thinking of getting this case. How is your holding up? Also, have you ever tried the Elago G4 or Rearth Ringke Slim? I'm curious how much thicker this case is over the others.
Click to expand...
Click to collapse
the case is holding up pretty well. i haven't tried any other cases other than this one so far. i am actually thinking about purchasing the seido active case with the kickstand. i did have my first drop a couple weeks ago. i was in my car with the door open and it slipped out of my jacket pocket. when it hit the ground it actually popped out of the case. luckily it wasnt too high off the ground. there was no damage to the phone since it was in the case when it hit, but when it popped it, it did slide a couple inches. i can confirm that this case is not made for drop protection.
I have the Samsung flip case, using it now, not sure to keep it. It's so unconvinced compare to my non-flips one. What the better way to use it? hard to hold unless fold the flip all the way to the back, take extra time to "open the case" .... Grrrr
just purchased the mugen power extended battery. pm me if you are interested in this case since i dont need it anymore.
So I ordered the ones from XtremeGuard Spartan Tempered Glass
http://www.xtremeguard.com/LG-G3-Screen-Protectors-p/lg-g3-screen-protector.htm#.U8CjKOXD-3g
And used the discount code and got them for 6.00 a piece. Havent got them yet but people are reporting that they are aligned horribly and requesting refunds.
So now I need another brand. I've always used spigen for my regular screen protectors. Never tired a glass one.. But there's plenty of brands out there..
Anyone make any recommendations based on the g3 or previous phones models that they used an glass protector on?
Ones I've looked at are:
http://www.amazon.com/Protector-Th...&sr=1-1&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Tempered-Scr...&sr=1-2&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Anti-Scratch...&sr=1-3&keywords=lg+g3+glass+screen+protector
http://www.amazon.com/Nillkin-Hard...sr=1-8&keywords=lg+g3+glass+screen+protector
Sent from my GT-N7105 using XDA Premium 4 mobile app
Sent from my GT-N7105 using XDA Premium 4 mobile app
I am using the one in your first link.
The Spigen GLAS.tR NANO SLIM , a bit pricy but I've used them on my last couple phones and love them.
I think Spigen glass products is so pricy, but, it's worth it I think!
I just ordered the Spigen. I went with it because it was so thin with rounded corners, it completely covers the top, and because I could get it with prime (I want to slap it on before I touch the new screen to ensure no smudges). Most don't seem to cover the top and that leaves an area for a crack to start, and probably doesn't look as nice.
I had planned on ordering the second link one which seemed better while cheaper, but it's not available now.
I stopped using screen protectors on my last 2 phones (Nexus 4 and Nexus 5). However, my Nexus 5's screen developed a couple of pretty nasty scratches over the past month or two. In an effort to not subject my G3 to the same fate, I did some research and went with the recommended Spigen GLAS.tR NANO SLIM Tempered Glass protector. It was definitely pricey but had excellent reviews and I was hoping to keep the feel of the stock screen, which these glass protectors supposedly mimic.
My phone finally arrived today so I immediately installed the Spigen protector before I even turned the phone on. It was significantly easier than what I remember from standard screen protectors and came out absolutely flawlessly. I was never able to accomplish this with regular screen protectors so I was very happy that the ease of install lived up to the hype. Overall the screen protector feels like the bare screen and you'd never know it was there, especially once the TPU case was installed.
While it is pricey, I imagine it will last quite a while, so it's worth it to me. I'd definitely recommend it.
**Ignore the thing that looks like a bubble near the bottom left of the screen, it was a piece of dust that wiped right off.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I goth this
http://www.amazon.com/gp/product/B00JV93WC4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fits very nice and is thin, but it seems to pick up stubborn smudges rather easily. This is the first glass screen protector I bought so I don't know what to expect.
I just ordered this.
http://www.iloome.com/LG-G3-Screen-Protector-Flexible/dp/B00LFTMAHG
Sent from my Nexus 7 using XDA Free mobile app
I went with some glass from eBay, it was a doodle to fit and cost £8. Infinitely better than the screen protector that came from spigen (not glass), that seemed to smudge and was took hard to fit (bubbles)
Go with #3. Its the best for the money hands down. Trust me, you will not be disappointed and probably buy an extra after you get it.
Beware.. if you buy any of them with a big cut out rather than a separate cut out for the camera and speaker you will get a lot of dust collecting there. At least my nillkin one does anyway, apart from that its great.
Got the Spigen, seems be be the thinnest at .23mm
Thinking about upgrading to a glass screen protector. Has anyone had problems with trapping a rogue dust/fibre whilst applying? With traditional PET screen protectors its ok to lift up and get a bit of sticky tape to remove the dust/fibre that was trapped.
Thanks!
Wow that glass is fancy. I've never had issues with my usual clear stick on $5 3-packs from any brand out there on Amazon. I just change them out after 6mo to a year for a fresh look.
Actually, I'm big fan of Spigen......So I bought the case and glass screen protector for my G3.
I didn't apply the screen protector on my phone yet because I didn't get my phone.
But. I'll upload new updated comment after applying that.
I can't wait for my G3.
I got the SGP Nano glass and it works great. Just don't be a dumbass like me and try to wipe the sticky side when you mess up.
Does the spigen cover the front camera? If so does it obscure it at all?
kevina90 said:
Does the spigen cover the front camera? If so does it obscure it at all?
Click to expand...
Click to collapse
Yes. The only cut out is the speaker. Everything else is covered. It is crystal clear and I have seen no difference in before and after pics using it. Hell, if I didn't put it on I'd be hard pressed to tell it's there. 100% satisfied.
Lorimere said:
Yes. The only cut out is the speaker. Everything else is covered. It is crystal clear and I have seen no difference in before and after pics using it. Hell, if I didn't put it on I'd be hard pressed to tell it's there. 100% satisfied.
Click to expand...
Click to collapse
Totally agree! I have literally just put mine on. I mis-aligned the first time and had trouble trying to pry it off again, but luckily I got it off and re-applied no problem!
MICkingslayer said:
I think Spigen glass products is so pricy, but, it's worth it I think!
Click to expand...
Click to collapse
SGP glass is same as Glass4m protector, but the pricing Glass4m protector is more cheap than SGP.
Just $16.99
http://glass4m.com/product/glass-m-premium-tempered-glass-screen-protector-for-lg-g3
Sent from my iPhone using Tapatalk
I went with the skinomi: http://www.amazon.com/gp/product/B00L2PDY6O/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
It's $15 with Prime and has a lifetime warranty: The purchase of any Skinomi product including TechSkin and DesignSkin includes a lifetime replacement guarantee. Yes, you read it right! We are confident that Skinomi products are the toughest and the only film protector you'll ever need. If ever a properly installed TechSkin is scratched, torn, or damaged, we'll replace it free of charge.
The last glass one I purchased for my X ended up breaking from my keys and I had to replace it so I figure the warranty might come in handy. Not many reviews but they were both positive. Arrives Saturday and I I'll try to come back here and update with my thoughts.
today I got my level 5 performance series case from Incipio today.
Anyways so far I like the case a lot compared to my Otterbox Defender. The case is very durable but thinner and more sleek than the Defender. The holster is top notch and premium as well granted I never use the holsters with my cases but some might like it.
The built in screen protector also fits very tight to the screen too and the home button on the bottom of the protector has a plastic frame all around it but doesn't affect using the finger print scanner. It looks like less dust will get under this due to it being tighter and really no gaps near the home screen for dirt to get under.
The only downside to the built in protector like the Otterbox Defender it's not very clear. granted it is a lot more responsive than the Defender though and has no rainbow effect. Not impressed by the clarity but not really much out there right now to protect the screen.
Only other downside I see is the speaker volume is a little softer due to the protector covering it.
Overall I say this is a great case. However you might want to look at the Level 4 because Amazon has the white case for about 31 bucks if you want to use your own tempered glass and not have a built in protector because otherwise the level 4 is almost the same thickness as the level 5 but maybe with a bit less of a raised edge around the screen.
Y u not post pictures???
Sent from my Nexus 5X using Tapatalk
Blues, where are all the high quality pictures that go with these threads?
Maybe a couple of the packaging also? Thanks.
felloffthetruck said:
Blues, where are all the high quality pictures that go with these threads?
Maybe a couple of the packaging also? Thanks.
Click to expand...
Click to collapse
My phone is already in the case so I'll take a couple pics later with my S2 tablet.
stlbluesfan said:
My phone is already in the case so I'll take a couple pics later with my S2 tablet.
Click to expand...
Click to collapse
Cool, I'll be looking for them.
Here are a few pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice, thanks for the pictures. Is the back grippy or a hard plastic?
felloffthetruck said:
Nice, thanks for the pictures. Is the back grippy or a hard plastic?
Click to expand...
Click to collapse
i wouldn't say a hard plastic but more of a soft, matte finish.
I really dig the case except the built in screen protector sucks just like the otterbox defenders does. This one might be worse but it is far more responsive and tight to the screen.
If there would have been good tempered glass protectors out there I would have simply bought the level 4 case which doesn't have the built in protector and is only 27 bucks now on amazon.
Just wanted to bump the thread. Got this case today and it is really good. The white and black are on sale for $25 at Walmart and Amazon. I agree that the screen protector is responsive but the clarity is horrible. I don't care as much about screen protection so I just popped the screen protector off the front cover - solves that problem. I can always add a screen protector directly to the screen later on. The feel of the case is very good in hand and is the best "protective" case I've tried for the S7, better than the Poetic and Supcase ones, at least.
I highly recommend this case especially at $25.
bigkevbosky said:
Just wanted to bump the thread. Got this case today and it is really good. The white and black are on sale for $25 at Walmart and Amazon. I agree that the screen protector is responsive but the clarity is horrible. I don't care as much about screen protection so I just popped the screen protector off the front cover - solves that problem. I can always add a screen protector directly to the screen later on. The feel of the case is very good in hand and is the best "protective" case I've tried for the S7, better than the Poetic and Supcase ones, at least.
I highly recommend this case especially at $25.
Click to expand...
Click to collapse
The other issue I don't like is the audio is muffled due to that section being covered. When using my Otterbox or Supcase the audio is a lot louder than the Incipio.
I saw Amazon knocked the price down. Otherwise I'd say order the level 4 protector from Amazon if you don't want the screen protector then. Still rated for 13ft drop (I never trust drop ratings) and is cheaper than level 5. On the level 4 the audio sounds louder too. I'm guessing because it doesn't have port covers or a screen protector more sound can escape through the case. I might just go back to my level 4 vs the Otterbox Defender since I keep getting dirt under the screen and go naked on teh screen.
these are the cases I have managed to acquire so far
first photo left to right razer rugged, orzly leather folio case,orzly thin black ,orzly thin frosted, 2nd photo tudia case and razer thin. I'm currently using one of the 2 tudias I bought as they are similar to a spigen slim armour ruggedized TPU with a polycarb snap on back armour, anyone wanting full pics of the cases and how much each costs from where I'll be uploading pics of each case to my drive account so people can see before they buy there are lots of other cases mainly TPU appearing on Amazon, but for anyone who hasn't bought a case I'll try and get each one done over the next day or 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Phone using Tapatalk
how do you like the tudias? can you post more pics of those
I'm using the tudia with the silver back breaks up the all the black it looks good doesn't add much bulk , the finger print reader port has been thoughtfully scalloped away to make using it easier, the cylinder buttons work flawlessly, even with an orzly screen protector there's a good .5 mm clearance from it to the desk when face down and about 1mm all round when face down so the speakers are kept clear of the desk cut outs are precise good clearance on back to protect camera .
Sent from my Phone using Tapatalk
I just received my orzly case today and I gotta say I'm a little disappointed. I bought the "clear" one which I found out later was actually frosted, and unlike the pics show, it's pretty much nowhere clear clear.. You can see the Razer symbol, but that's about it. I'm definitely ordering the tudia clear shortly, my original idea was to wrap the phone with a dbrand then use the clear case as extra protection, but you ain't seeing anything through this thing lol
mikeandjaimie said:
I just received my orzly case today and I gotta say I'm a little disappointed. I bought the "clear" one which I found out later was actually frosted, and unlike the pics show, it's pretty much nowhere clear clear.. You can see the Razer symbol, but that's about it. I'm definitely ordering the tudia clear shortly, my original idea was to wrap the phone with a dbrand then use the clear case as extra protection, but you ain't seeing anything through this thing lol
Click to expand...
Click to collapse
have to say if the clear is the same quality as this rugged case it'll be a nice case for showcasing your phone with a skin without damaging the skin
Sent from my Phone using Tapatalk
I bought the Razer Rugged case however was fine the fact that it left a weird lip at the bottom of my phone just didn't feel natural to hold so gone back to using the phone without a case.
I know living life of the edge but don't have a habit of cosmetically damaging my phone's.
I didnt like the phone in a case either but couldnt live on the edge any longer, I dropped my last phone a day before the delivery of my razer.
Ive made a suede case for the razor with all the holes punch out, its pretty neet - ill update with pictures when im home.
Got the Orzly wallet case. Not bad in general. One major downside is the usb cutout. Razer uses squared profile on their connectors, but the case had rounded profile which prevented original accessories from being inserted all the way. Had to do some carving with scissors. Not the end of the world, but could be better
Thank you
nexy33 said:
I'm using the tudia with the silver back breaks up the all the black it looks good doesn't add much bulk , the finger print reader port has been thoughtfully scalloped away to make using it easier, the cylinder buttons work flawlessly, even with an orzly screen protector there's a good .5 mm clearance from it to the desk when face down and about 1mm all round when face down so the speakers are kept clear of the desk cut outs are precise good clearance on back to protect camera .
View attachment 4378524View attachment 4378525View attachment 4378526View attachment 4378527View attachment 4378528
Sent from my Phone using Tapatalk
Click to expand...
Click to collapse
HI there without you showing us this case I would have not known it existed thank you so much
AC
spigen now has a case ive have only been able to find it on amazon but there is customer images for it so its real and ive ordered one so i should be getting it in the next few days
https://www.amazon.com/gp/product/B078KJQH5V/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
corybrubaker said:
spigen now has a case ive have only been able to find it on amazon but there is customer images for it so its real and ive ordered one so i should be getting it in the next few days
https://www.amazon.com/gp/product/B078KJQH5V/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just got my Spigen case it's the best case I own thus far and I own the Razer official case, orzly case, and the tudia case. Pick this up you won't be disappointed.
I picked up the Spigen rugged armor and it lifts the Razer screen protector
The Tudia doesn't lift a screen protector, but you have to get it centered perfectly. I've tried them all, the razer cases were the biggest POS's... Their rugged case was a joke and if you take them off without paying attention, you almost snap it in half because of their stupid design of having no side walls in the center area.
Been happy with the Tudia, still want something more like an otterbox defender. But I think I'm going to just 3d print something stupid awesome and thick.
I have this Orzly case in orange.
Fits perfect. Charging hole is big enough and the edge keeps the screen off the table if you put it screen down (which I never do).
Camera is also protected (if put on a flat surface).
Adds grip, so you won't let the phone slip out of your hand.
https://www.amazon.com/TUDIA-Slim-F...9&sr=1-1-spons&keywords=razer+phone+case&th=1
Got my S23U today, I had bought the Spigen tough armour case for it.
I have found that this case seems pretty bad for use with screen protectors. I had put a glass screen protector on and when I pushed the phone into the case, it makes the sides of the screen protector lift a tiny bit as it shows a load of bubbles that weren't there at all prior to putting into the case.
I tried putting another screen protector on and tying again and this one done exactly the same.
After looking at it all, the case is very thick, so i am going to try to get a different one.
Has anyone else tried this case?
I bought one for my S22U but I only used it briefly. It wasn't a good ergonomic fit for me.
The dbrand grip case I'm using is and I highly recommend it. I have one on order for my S23U.
No screen protector compatibility issues with it either.
james_lpool said:
Got my S23U today, I had bought the Spigen tough armour case for it.
I have found that this case seems pretty bad for use with screen protectors. I had put a glass screen protector on and when I pushed the phone into the case, it makes the sides of the screen protector lift a tiny bit as it shows a load of bubbles that weren't there at all prior to putting into the case.
I tried putting another screen protector on and tying again and this one done exactly the same.
After looking at it all, the case is very thick, so i am going to try to get a different one.
Has anyone else tried this case?
Click to expand...
Click to collapse
Spigen makes their own screen protectors that are meant to work with their cases. I have never used one though as the Tough Armor always extends far enough beyond the screen of the phones I've used it on that I've never managed to crack one.
i always been curious why people wear their phone with these gigantic extreme cases.
I'm definitely pro case, but phone are already quite tough, an a little layer of silicone (plus possibly a glass screen protector) would be enough to prevent damages in most of the circumstances
Fl1nt91 said:
i always been curious why people wear their phone with these gigantic extreme cases.
I'm definitely pro case, but phone are already quite tough, an a little layer of silicone (plus possibly a glass screen protector) would be enough to prevent damages in most of the circumstances
Click to expand...
Click to collapse
I have large hands. Big cases actually make it easier for me to type without cramping my fingers. In addition to making sure I don't break the glass on my expensive toy.
Keep in mind, I used to carry around this thing... Nothing these days compares to the thickness of this thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PhoneArena's size comparison tool showing that an S23 Ultra isn't even half the thickness.
Danger Hiptop II vs Samsung Galaxy S23 Ultra - Visual phone size compare
Compare Danger Hiptop II vs Samsung Galaxy S23 Ultra sizes against each other in real-time with our phone size comparison tool.
www.phonearena.com
james_lpool said:
Got my S23U today, I had bought the Spigen tough armour case for it.
I have found that this case seems pretty bad for use with screen protectors. I had put a glass screen protector on and when I pushed the phone into the case, it makes the sides of the screen protector lift a tiny bit as it shows a load of bubbles that weren't there at all prior to putting into the case.
I tried putting another screen protector on and tying again and this one done exactly the same.
After looking at it all, the case is very thick, so i am going to try to get a different one.
Has anyone else tried this case?
Click to expand...
Click to collapse
I'd suggest going with the Neo Hybrid and Spigen's screen protector
I've had the Spigen Tough Armor for probably 5 of my past phones and it is definitely a favorite of mine. I change cases every few days along with the Spigen Liquid Crystal, Samsung S-View, a leather wallet case, and the CaseBorne heavy-duty case. This year's S23U CaseBorne is a bit too big and tight for me, so it likely won't be in rotation very often. I don't use any screen protector.
My problem with spigen cases is that the power & volume buttons are open not fully sealed like samsung cases or other high end covers which get dust & particles into the cover & scratches the frame when trying to remove it
Perfect combo for me.
Of the 2 Spiegen cases that I use, the Liquid Crystal does have open button coverings, but the Tough Armor does not.