Hello,
some of us who have bought a Hero locked to Orange can't seem to get it unlocked (http://forum.xda-developers.com/showthread.php?t=555424).
For those have you who have managed to successfully unlock an Hero on Orange please can you advise on your experience- did you have to do something differently? And who you used to get the code? I have used Unlock Now (www.unlock-now.com) but the code they have supplied didn't work (they refunded me).
I have never had a problem unlocking a HTC phone until now and I find it hard to believe that Orange Heros can't be unlocked.
Please help if you can.
*********************************************************
[Update 16/10/09]
I am glad this thread has been of use to people.
I thought I would add and update to the first page so people don't have to wade through the whole thread.
If you are experiencing this issue you have two choices:
1)CID unlock your Hero (http://forum.xda-developers.com/showthread.php?t=559806).
2)Use a Rebel II Sim.
OK there are three choices.
3) Use your Hero on an Orange contract for about three months then ring up Orange and ask them for a unlock code. They will charge about £20 for it and you may have to wait up to two weeks for em to send it.
C'est tout.
*********************************************************
[Update 24/10/09]
OK, after discussions and PM's on this thread I was advised to use the code I had previously bought with a different rom (when I first got my Hero tried it I was using the Orange stock rom then Modacos 2.3).
I just tested it now, took out my rebel sim put in the code and it works! I am currently using Modaco's 2.8.
Hope this helps.
I used http://hero.unlock-now.com/sim-unlock-HTC-Hero/ and the code worked for me. I did get my Hero within a few days of release. My work collegue also did the same with no problems.
What network do you use your hero on now?
hi i bought one locked to orange uk and unlocked it here
http://www.simunlock-htchero.com/buy.html
i received the code in 2 minutes and it worked, i use now Optimus in Portugal
Got my second one (for the wife) off eBay a week or two back. Poster claimed it was days old. Unlocked through htcunlock fine. Three sim seems to work better with Orange radio than the tmobile hero I purchased earlier.
Zuber
RetroFlux: I'm now on o2 after my unlock.
i'm getting the same thing with my orange locked hero, I have even tried a foreign sim as suggested. But does not seem to unlock with the correct unlock code. Is there a cable method for unlocking?
I have the same problem.
First case:
Turn on the phone with orange SIM card - everything works fine.
Turn on the phone with any other SIM card (I actually tried 3 other SIM card from 3 different providers). It asks unlock code. Enter unlock code I bought (actually any code containing 8 digits) it says "Network unlock successful." But after that it allow only emergency calls and if I try to make a call I see "Not registered in network" message. After reboot it asks unlock code again.
Second case:
If I do "restore to factory defaults" and turn it on the first time with my (no orange) SIM card, it asks unlock code I enter correct unlock code (salesman gave me one, and after that I also bought the same code in the Internet )
it hangs with phrase "Unlocking SIM card...". (Actually "turn off menu" works, I even can make an emergency call, but that is all I can get from it)
Also I noticed that in the first case there is strange line on the bottom of the screen (of the size of the notification bar).
I have tried different ROMS (original, rooted, latest, modacos) all the same. I also tried to downgrade radio firmware. I even tried all SIM cards I can obtain, the problem is obviously doesn't caused by SIM/Network incompatibility. Btw, my SIM card works OK in another HTC Hero (which was bought with my one).
I think it is problem with unlock procedure itself, not with code correctness. If wrong code entered it must say something like "wrong code", but for any 8 digit code it says "Network unlock successful". Is is the symptom! )
I do not know what to do further
I got a (UK) Orange Hero about 3 weeks ago from dial-a-phone. Unlocked it without a problem about a week later from:
http://hero.unlock-now.com/sim-unlock-HTC-Hero/
Took about 20 mins and worked 1st time. Now running with an UK O2 sim. Sorry!
As I mentioned above, while first boot with my local SIM card it hangs with "Unlocking SIM card..." message. At this time I see the following processes running.
Code:
# ps wwwwwww
PID USER VSZ STAT COMMAND
1 0 292 S /init
2 0 0 SW< [kthreadd]
3 0 0 SW< [ksoftirqd/0]
4 0 0 SW< [watchdog/0]
5 0 0 SW< [events/0]
6 0 0 SW< [khelper]
7 0 0 SW< [suspend]
8 0 0 SW< [early_suspend]
9 0 0 SW< [kblockd/0]
10 0 0 SW< [kmmcd]
11 0 0 SW< [btaddconn]
12 0 0 SW< [btdelconn]
13 0 0 SW< [kondemand/0]
14 0 0 SW< [qmi]
15 0 0 DW< [rpcrouter]
16 0 0 SW< [detection/0]
17 0 0 SW< [krpcserversd]
18 0 0 SW [pdflush]
19 0 0 SW [pdflush]
20 0 0 SW< [kswapd0]
21 0 0 SW< [aio/0]
22 0 0 SW< [panel_on/0]
23 0 0 SW< [cabc_work_q]
24 0 0 SW< [mtdblockd]
25 0 0 SW< [kadspd]
26 0 0 SW< [USB mass_storag]
27 0 0 SW< [synaptics_wq]
29 0 0 SW< [kstriped]
30 0 0 SW< [krfcommd]
31 0 0 SW< [mmcqd]
33 0 3328 S /sbin/adbd
50 1000 808 S /system/bin/servicemanager
51 0 852 S /system/bin/vold
52 0 668 S /system/bin/debuggerd
53 1001 11064 S /system/bin/rild
54 0 73504 S zygote /bin/app_process -Xzygote /system/bin --zygote --start-system-server
55 1013 30172 S /system/bin/mediaserver
57 1002 1180 S /system/bin/dbus-daemon --system --nofork
59 0 800 S /system/bin/installd
61 1008 1196 S /system/bin/akm8973
73 0 0 DW< [snd_rpc]
77 1000 173m S system_server
140 9998 159m S android.process.acore
142 1001 132m S com.android.phone
144 1000 96660 S com.htc.android.htcsetupwizard
166 10002 111m S com.google.process.gapps
179 0 0 DW< [ksdiorqd]
180 0 0 SW< [tiwlan_wifi_wq]
186 10004 96600 S com.htc.android.worldclock
193 10005 101m S com.htc.provider
207 1010 3160 S /system/bin/wpa_supplicant -Dtiwlan0 -itiwlan0 -c/data/misc/wifi/wpa_supplicant.conf
237 10031 121m S com.htc.android.htcime
244 9999 140m S com.htc.launcher
253 10016 98640 S com.htc.android.psclient
265 10017 107m S com.android.mms
285 10019 97736 S android.process.media
296 10020 106m S com.google.android.apps.maps:FriendService
307 10022 99016 S com.esmertec.android.jbed
322 10036 97.6m S com.google.android.partnersetup
332 10042 100m S com.htc.calendar
346 1000 100m S com.android.settings
356 10029 98612 S com.htc.android.footprints
366 10013 98012 S com.android.setupwizard
430 0 740 S /system/bin/sh -
468 0 2072 R ps wwwwwww
Im having the same issue, I got a new HTC Hero on Orange today, and it wont unlock. I used Unlock-now, so I have sent them a message asking for my money back, will that suffice. Has anyone been able to get there Orange UK, branded and locked phones unlocked.
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
i'm in the same boat! bought the code but no joy. it say's unlocked but could not register my voda sim. Anyone?
I tried to contact Orange today to buy an unlock code from them directly, after been passed about I eventually got through to someone bureaucratic wench who was completely unhelpful and I ended up telling them to F off and hung up. Kind of shot myself in the foot there.
I know this doesn't help our situation but I am still looking into it.
joemax said:
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
Click to expand...
Click to collapse
So are you saying there is an issue with the new firmware? When you say firmware do you mean ROM? As I have already flashed Modacos latest ROM and my Three/Vodafone/O2 sim still won't work.
I don't have my Hero with me at the moment but will post back my firmware number later, if other people (who are having the same issue) can post theirs maybe we can find a common firmware at fault.
nintendolinky said:
I used Unlock-now, so I have sent them a message asking for my money back, will that suffice.
Click to expand...
Click to collapse
I used Unlock-Now, they did refund me after your usual basic diagnostics.
joemax said:
nintendolinky, what is your ROM version ? There may be a possibility you have the latest firmware build... maybe...
Click to expand...
Click to collapse
Ok, here are my firmware details:
Firmware version: 1.5
Baseband Version: 63.18.55.06EU_6.35.06.18
Kernel Version: 2.6.27-8dd6deee [email protected]
Build Number: 2.73.405.5 146733 CL#61267 MCR2.2c release keys
Software Version: 1.0.0.A6288
Someone out there must be able to help fix this, pros/cooks/anyone can you shed anylight on this?
I've tried oldest/newes/custom ROMs, it looks like unlocking procedure doesn't depend on ROM at all.
is there a way to unlock this via cable? what about flashing the rom?
my build number is
Build Number: 1.76.61.3 whats the difference with this and Build Number: 2.73.405.5?
Here is my info:
Firmware version: 1.5
Baseband Version: 63.18.55.06EU_6.35.06.18
Kernel Version: 2.6.27-8dd6deee [email protected]
Build Number: 2.73.405.5 146733 CL#61267 MCR2.2e release keys
Software Version: 1.0.0.A6288
My build number is different, to the one listed here.
Hello,
I am using Vegan Ginger, and feel it is less responsive than Nexus one running 2.3.3. I checked the article from androidevolutions.com
It seems to indicate dual core is really used after Froyo.
Then I checked Vegan Ginger runtime, it ONLY list one set of migration / watchdog / ksoftirqd as below. This leads me to think only one core is used????
For a SMP system, for each core kernel is managing, there should be one set of those threads though as I understand.
USER PID PPID VSIZE RSS WCHAN PC NAME
root 1 0 296 204 c0166c94 0000875c S /init
root 2 0 0 0 c00e4c70 00000000 S kthreadd
root 3 2 0 0 c00c2c08 00000000 S migration/0
root 4 2 0 0 c00ceb08 00000000 S ksoftirqd/0
root 5 2 0 0 c0103dd0 00000000 S watchdog/0
root 9 2 0 0 c00e0364 00000000 S events/0
root 11 2 0 0 c00e0364 00000000 S khelper
MAYBE just Vegan Ginger version isn't using dual core while stock does? I noticed the kernel is built with SMP and PREEMPT, but when kernel start up, it seems not recognize two cores available though.
Please help to clarify?
Thanks.
I don't think any rom is using both cores, yet. From what I hear, even the xoom doesn't use both.
So that means Tegra 2 is a dual core processor in design. But Linux is using it as single core processor.
I understand Android framework is using multiple threads, but only one UI thread to handle events. Also, many application not designed in a way to use multiple threads.
However, if kernel detect multiple cores, then different threads could run at the same time in different cores, this is purpose for multiple core design.
cat /proc/cpuinfo, I can only see one CPU as well.
I suspect this is the build issue, XOOM is more responsive when I tried it in store.
ROM is discontinued for VIEW, use YNC's latest update
DextersJB
i would test it out but i gotta charge my view its been dusty since i got my N7 lol
Thank you!
first.. thank you for trying to save VIEW.. there is no much going on here. but if you can save our dying VIEW, even slight attempt is greatly appreciated.
I will test this. I am kind of new on tablet but I will test and report back to you. here we go..:good:
Dexter_nlb said:
i would like to see if i can utilize the JB on View.
for this i have changed the kernel and partitions(removed those i do not know atm).
and uploading my test image for someone to test. Download it here MD5 06096eea121b5ec534830fcf97072fc4
HC hboot is required here, GB boot is not supported.
please if someone can help and test it, it will be great.
REMEMBER to factory reset, before installing this rom
I would also like to see a "mount" output run in as shell. so i know what partitions are different, besides /system i know for now.
Click to expand...
Click to collapse
myowin said:
first.. thank you for trying to save VIEW.. there is no much going on here. but if you can save our dying VIEW, even slight attempt is greatly appreciated.
I will test this. I am kind of new on tablet but I will test and report back to you. here we go..:good:
Click to expand...
Click to collapse
it if dos not boot at first try (showing a X after 20-30 seconds)..
maybe change the /system/build.prop in the zip.
replace everything you see in th build.prop with "flyer" with "express" .
save it and copy it back into the zip and replace the original one.
in the /system/lib/hw , rename files you see with "flyer" in the name, replace that with "express" too. ie lights.express.so
flash it once more and see if it helps.
Pulled, will try in about an hour when she charges back up. Apparently I left my wifi on..seems to drain a little more in ICS.
Will report back
Dexter_nlb said:
I would also like to see a "mount" output run in as shell. so i know what partitions are different, besides /system i know for now.
Click to expand...
Click to collapse
Code:
# mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
/dev/block/mmcblk0p26 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p30 /data ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p31 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p34 /devlog ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/data/d /data/d debugfs rw,relatime 0 0
/dev/block/vold/179:65 /mnt/sdcard2 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:36 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:36 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
and during installation:
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : FlyerJB-view
ROM Version : 1.0
ROM Author : dexter_nlb
Device : view/express-3g
Start at : Fri Jul 27 16:36:10 2012
script aborted: file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
Installer Error (Status 7)
End at : Fri Jul 27 16:36:10 2012
install finished, rebooted, stuck on white HTC bootscreen.
adb detects the device
Code:
$ ./adb devices
List of devices attached
HT16THY00941 device
but can't connect
Code:
$ ./adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
thanks,
just what i needed here.
Sounds cool. From what I have read we will lose Flash if we go to JB. Is this correct?
Stopping support for Flash by Adobe now in favor of HTML5 is sort of like closing all gas stations in favor of electric. Great idea, terrible timing. HTML5 is nowhere near ubiquitous.
** Ring up yncconsulting. I'm sure he would want to help on this.
boastt said:
and during installation:
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : FlyerJB-view
ROM Version : 1.0
ROM Author : dexter_nlb
Device : view/express-3g
Start at : Fri Jul 27 16:36:10 2012
script aborted: file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
Installer Error (Status 7)
[/QUOTE]
can you replace META-INF\com\google\android\updater-script
in the zip you downloaded first with the updater-script in the zip attached to this post and try again.
the reboot is because it probably only wiped, but not unpacked anything to the partition.
Click to expand...
Click to collapse
Dexter_nlb said:
can you replace META-INF\com\google\android\updater-script
in the zip you downloaded first with the updater-script in the zip attached to this post and try again.
the reboot is because it probably only wiped, but not unpacked anything to the partition.
Click to expand...
Click to collapse
Done. Install went smooth. Theres a long delay waiting for a sim card, then the "Insert SIM card" shows up with a "skip" button.
Overall, it seems pretty solid for what it should be.
Compared to your thread for the flyer: mic doesn't work, GPS seems to not even exist on the device, using that UMS doesn' work, if scrolling in chrome is part of the 2d hardware acceleration then it feels slow
boastt said:
Done. Install went smooth. Theres a long delay waiting for a sim card, then the "Insert SIM card" shows up with a "skip" button.
Overall, it seems pretty solid for what it should be.
Compared to your thread for the flyer: mic doesn't work, GPS seems to not even exist on the device, using that UMS doesn' work, if scrolling in chrome is part of the 2d hardware acceleration then it feels slow
Click to expand...
Click to collapse
thanks for the confirmation, no matter if its good or bad.
i believe its possible to make a generic edition and let the installer detect which parts belong to which hardware.
ill look into that.
the hardware issues, probably relate to the files /system/lib/hw where light/sensor/gps is for the flyer and probably differ from the view edition.
for the mic part, i believe those files are for flyer, which needs to be view specific as well.
anyways, thanks, its good to know it can be made working on view as well.
quick search on google, shows that Chrome is not as fast as stock browser, which might be was regular chrome users experience? JB is new and not all apps are adapted? maybe thats why this keeps coming back as being a problem, but might not be a build problem, but Chrome being less compatible.
mitchellvii said:
Sounds cool. From what I have read we will lose Flash if we go to JB. Is this correct?
Stopping support for Flash by Adobe now in favor of HTML5 is sort of like closing all gas stations in favor of electric. Great idea, terrible timing. HTML5 is nowhere near ubiquitous.
** Ring up yncconsulting. I'm sure he would want to help on this.
Click to expand...
Click to collapse
You can still use flash. You just cannot download it from the market but the ICS version works just fine.
In what ways is JB significantly better than ICS or GB in order to sacrifice some functionality to run it in your opinion? Not snarking here - I really would like to know.
In my personal experience, GB on this tablet is just fine. It can be overclocked and everything works, but of course I'd love the latest and the greatest if there is some noticeable performance pop.
"Not snarking here" - ehum.
mitchellvii said:
In what ways is JB significantly better than ICS or GB in order to sacrifice some functionality to run it in your opinion? Not snarking here - I really would like to know.
In my personal experience, GB on this tablet is just fine. It can be overclocked and everything works, but of course I'd love the latest and the greatest if there is some noticeable performance pop.
Click to expand...
Click to collapse
its all just a challenge and development tests/teasers.. for some it can easily be a daily driver, for others too much is definately not working.
I do not have it for the pen, so thats no priority personally.
but media playback for me, can be important, for now i just switch to SD when im on youtube.
but generally, there is alot of difference in the drivers and how framework and JB differs, i do not want to repeat , but it is for better, if just we can make more work better.
JB/ICS is alot better experience especially comparing our less good HC adaption.
JB kills GB. i'm running JB on my nexus and it's SO quick!
thanks for your hard work here, i hope we can get something running! we sort of have an ICS rom, but JB is what ICS should have been from the start..i'm pumped!
Yeah HC was pretty lame. Its really too bad the way HTC just completely abandoned what was an expensive device at the time.
I have a pen but really don't use it much anymore anyway. 7 inch tablet is just a little too small to comfortably write on anyway. I guess for me fast internet browsing and solid Netflix are the most important things.
Sent from my SPH-D710 using Tapatalk 2
Great work. I'm interested in testing once I can flash in a normal fashion (not sure how to switch out the zip file etc.)
Sent from my PG41200 using xda app-developers app
Thanks for the development of JB on the view, been thinking of trying to port some of the roms from the flyer lately. I'm not much of a developer so the fresh thread here is greatly appreciated.
Sent from my PG86100 using xda app-developers app
Runs great so far! A few minor issues but won't take much to iron out.
Hi,
I bought an Andorid media player. It isin't very clear who made it. It has a kingzer case but cannot find the case or any info on it on their website. It was made rooted I wanted to unroot it so I could run media apps properly. I then tried to install CWM spesifcally "CWM Recovery 6.0.1.2 for Allwinner A10 LY-F1/TREQ Tablets" thread on xda-developers. Its an Allwinner A10. So I got it to install but when I boot up my media box now I get CWM screen 4 times on my tv and its all pink saying
E: Can't mount /sdcard/
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
The buttons on the front of my media box only move the selection up and down cannot actually "select" anything. I have tried ADB it appears as "20080411 recovery" however when I try to fastboot it and do fastboot devices nothing appears. Iv tried both windows 7 and Linux Mint. I have no idea what to do. Id rather not just throw it away as scrap cost me £100. Below are the specs I got from the device before hand.
Android version 4.0.4
Release Codename: REL
API LEVEL 15
CPU ABI armeabi-v7a
Manufacturer unknown
Bootloader unknown
CPU ABl2 armeabi
Hardware: sun4i
Radio unknown
Board crane
Brand softwinners
Device: apollo-zhpubhost
Display: apollo_zhpubhos-eng 4.0.4
Fingerprint softwiners/apollo_zhpubhos-eng 4.0.4/IMM76D/20121210:eng/test-keys
Host androidck-desktop
ID IMM76D
Model zhpubhost-A10-APOLLO
Product apollo_zhpubhost
Tags: test-keys
Type: eng
User androidck
Also not sure if this helps but by typing adb shell ps
PID USER VSZ STAT COMMAND
1 root 320 S /init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [rcu_kthread]
7 root 0 SW< [khelper]
8 root 0 SW< [netns]
9 root 0 SW< [suspend]
10 root 0 SW [sync_supers]
11 root 0 SW [bdi-default]
12 root 0 SW< [kintegrityd]
13 root 0 SW< [kblockd]
14 root 0 SW [khubd]
15 root 0 SW< [cpufreq_uevent]
16 root 0 SW< [cfg80211]
17 root 0 SW [kworker/0:1]
18 root 0 SW< [rpciod]
19 root 0 SW [kswapd0]
20 root 0 SWN [ksmd]
21 root 0 SW [fsnotify_mark]
22 root 0 SW< [nfsiod]
23 root 0 SW< [crypto]
37 root 0 SW [nandd]
38 root 0 SW [nfmtd]
39 root 0 SW [kworker/u:1]
46 root 0 SW< [f_mtp]
47 root 0 SW [file-storage]
48 root 0 SW [kworker/0:2]
49 root 0 SW< [kpsmoused]
50 root 0 DW [kinteractiveup]
51 root 0 SW< [kfantasy]
52 root 0 SW< [binder]
53 root 0 SW< [codec_resume]
54 root 0 SW< [krfcommd]
55 root 0 SW [hdmi proc]
56 root 312 S /sbin/ueventd
58 root 16536 S /sbin/recovery
64 root 4480 S /sbin/adbd recovery
104 root 1876 S /sbin/sh -c ps
106 root 1880 R ps
I got that. Any help wold be really appreciated. Thanks
Perhaps others can, but from what you have posted, I have no idea which box you have.
A picture of the device, and better yet, a picture of the circuit board may help.
Then perhaps someone on these forums can identify it and point you to a ROM (Firmware) that you can load.
Lots of these things are sold under different names, so installing a new firmware may "re-brand" it, but at least you'll (hopefully) have a working device.
Linuxslate said:
Perhaps others can, but from what you have posted, I have no idea which box you have.
A picture of the device, and better yet, a picture of the circuit board may help.
Then perhaps someone on these forums can identify it and point you to a ROM (Firmware) that you can load.
Lots of these things are sold under different names, so installing a new firmware may "re-brand" it, but at least you'll (hopefully) have a working device.
Click to expand...
Click to collapse
attached the picture of the motherboard and here is a link to the box on ebay - ebay - co uk - /itm/3D-Blu-Ray-3-5-HDD-MKV-Media-Player-MINI-PC-Android-4-0-TV-Box-DDR3-1GB-HDMI1-4-/170962126682?pt=UK_WSJL_Wholesale_GL&hash=item27ce23075a
not allowed to post outside links but its ebay its safe
If you could help me i would be grateful
Any help? I really don't know what to do. I don't want to throw away £100
Use PhoenixCard or Livesuit to reinstall stock firmware
diogo.c said:
Use PhoenixCard or Livesuit to reinstall stock firmware
Click to expand...
Click to collapse
Hi , i have same problems but i dont have a stock firmware whit itek itad002
some news or help me please
many thanks
Paolo