Related
I finally made it:laugh: firefox can work on xperia neo v
There are quite jobs needs to done, but basic things works well
didn't test too much but for now
calls works
camera doesn't work
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
####final update
Here is alpha preview with firefox os v1.3pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.xz
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update5
I was upgrade my system to i7 haswell maybe I can build roms for whole 2011 xperia series at least I will try I am not promise anything but stay tuned
####update 4
Here is alpha preview with firefox os v1.1hd_pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.7z
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update 3
switch to v1.1.0hd branch
rebase with fxp-229-cm9 branch
HDPi build works and screen resolution is normal now
need a lot of time to provide a stable version but maybe a preview version
####update 2
no release for now
Sources of builds
and credits goes to
neuralassembly
sola
FXP
Cyanogenmod
AOSP
Mozilla.org
GNU/Linux
thanks to them
oh yeah ... well done, take help from other developers
Looks nice there, bud.
Edit: Darn it. Too bad I can't speak Japanese and those guide just canned me to Tokyo.
Greetings, from HTC One via Tap-A-Talk IV Beta
Good work bro ,
keep going for this project :good:
Best regards from Team Blur
What's this thread doing on general section? Should be in dev section. Great job bro. Hope some devs jump in this project.
Sent from my MT11i
What kernel you used?
n1kolaa said:
What kernel you used?
Click to expand...
Click to collapse
Cm9 kernel
Sent from my haida
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
n1kolaa said:
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
Click to expand...
Click to collapse
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
yacloo said:
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
Click to expand...
Click to collapse
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
yacloo said:
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
Click to expand...
Click to collapse
Code:
[email protected]:~/b2g_work/B2G/gaia/build$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
--2013-07-09 11:05:10-- https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 50.19.230.97
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|50.19.230.97|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 780 [text/x-diff]
Saving to: `b2g-webapp-zip.patch.1'
100%[======================================>] 780 --.-K/s in 0s
2013-07-09 11:05:11 (107 MB/s) - `b2g-webapp-zip.patch.1' saved [780/780]
[email protected]:~/b2g_work/B2G/gaia/build$ patch -p1 < b2g-webapp-zip.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- webapp-zip.js.orig 2013-06-23 20:26:30.135978096 +0900
|+++ webapp-zip.js 2013-06-23 20:43:02.032010587 +0900
--------------------------
File to patch: webapp-zip.js
patching file webapp-zip.js
Hunk #1 FAILED at 335.
1 out of 1 hunk FAILED -- saving rejects to file webapp-zip.js.rej
[email protected]:~/b2g_work/B2G/gaia/build$ ^C
[email protected]:~/b2g_work/B2G/gaia/build$
look still geting error can you shere webapp-zip.js from your pc ?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I was update my sources, patch will not work on my sources
but anyway you can build your b2g without patch or you need to patch manually
mozilla was create new branch for hdpi devices called "v1.1.0hd"
I will build with v1.1.0hd branch but now I am busy maybe next week
I am trying to port B2G to smultron and i have a question :
In kernel the only modification is to add init.b2g.rc file and edit init.rc right?
init.b2g.rc :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service b2g /system/bin/b2g.sh
class main
onrestart restart media
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
on boot
exec /system/bin/rm -r /data/local/tmp
# set RLIMIT_NOFILE to increase soft limit from 1024(default) to 2048.
# Hard limit keeps default value(4096).
setrlimit 7 2048 4096
edit init.rc with this :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
service servicemanager-g /system/bin/servicemanager
class core
user system
group system
critical
service b2g /system/bin/b2g.sh
class main
onrestart restart media
or i need to edit more?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Nice OS, I like it
neuralassembly said:
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
n1kolaa said:
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
Click to expand...
Click to collapse
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
neuralassembly said:
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
Click to expand...
Click to collapse
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
n1kolaa said:
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
Click to expand...
Click to collapse
I cannot post to developer section because I am a new one, so I post here.
Please do not use the picture in my blog in your thread.
As for the update, I think you should not apply OTA system update
because my patch to gaia and gecko will be erased.
As a result, battery always shows 100%, the LED of home button is always ON,
and the effect of "GAIA_DEV_PIXELS_PER_PX=2" will also be erased.
Hi guys,
today I would like to present to you a simple project that was born on this thread to accomplish a very simple task: since there are thousand of Custom ROMs around here, so much of them are LineageOS based, and because of this their forced to build every time all the ROM and post updates here. Users are also forced to check if their preferred ROM was updated or not. That's why I decided to understand how LineageOS OTA Updater System App works. Because of this I've wrote a simple REST Server API emulation that fully works with your ROM (if integrated of course). How? Continue reading down here.
How does it work?
Of course is as simple as it should be. Clone the repo (is a simple PHP website that you can host on any shared hosting*/VPS that you like) and upload it into your preferred hosting. That's it. If you point your web browser to that address the App is already working.
After, you have to upload all your build to the _builds/ folder, and you're done.
The two already working calls /api and /api/v1/build/get_delta should answer correctly the updater app to make it work (remember that visiting it as a browser is not sufficent).
How to integrate it with my ROM?
You have two options:
- Declare cm.updater.uri on your own build.prop file with the value of you own server URL where you have deployed it (This can be done also by the user with any Android App from the Market)
- Replace the string conf_update_server_url_def value inside values.xml of the OTA App source code (COMPILE TIME ONLY!)
Which builds does it support?
Anything that will be borned by the official guide on how to build your custom LineageOS ROM! So, in poor words will be: stable, rcs, nightly and snapshots (likely called EXPERIMENTAL), from CM7 to CM14.
Delta updates SHOULD work too. Just try it and tell me if they works
How can I debug it?
You can use this simple UnitTest that I've already pushed into my GitHub. Feel free to use it everytime you need. It's based upon NodeJS and Unirest.
Is it free?
"Free software is a matter of liberty, not price. To understand the concept, you should think of free as in free speech, not as in free beer."
—Richard Stallman
Click to expand...
Click to collapse
Use it as you want, do anything you want with it as it's MIT licensed.
Is it free of bugs?
That's why I'm here Only you can help me to squash all the remaining bugs!
I hope this will be useful to anyone of you, helping the ROM community providing a simple OTA updater that already works on LineageOS official ROMs.
Greets.
---
Project Home: https://github.com/julianxhokaxhiu/LineageOTA
More about the study: http://blog.julianxhokaxhiu.com/how-the-cm-ota-server-works-and-how-to-implement-and-use-ours
Changelog Build Scripts ( thanks to @Deltadroid ): https://github.com/syphyr/cm_build_scripts/blob/master/make_changelog
* On a Shared Hosting you can ONLY provide a FULL ROM download, NOT DELTAs!
---
Donators:
- @BlueFlame4 x2
Hey, I'm having trouble using your docker image behind a Nginx https reverse proxy. The server is correctly answering the requests:
Code:
{
"id":null,
"response":[
{
"incremental":"",
"api_level":"",
"url":"http:\/\/MYDOMAIN\/\/builds\/full\/lineage-17.1-20200830-UNOFFICIAL-lavender.zip",
"timestamp":1598774045,
"md5sum":"718fb89f935b979edd57b2642234d1fa",
"changes":"",
"channel":"unofficial",
"filename":"lineage-17.1-20200830-UNOFFICIAL-lavender.zip",
"romtype":"unofficial",
"datetime":1598774045,
"version":"17.1",
"id":"50533a894b2ab0d9b2711444ca4f2b530a8ff2389723ea2bd7ada6e029599e2c",
"size":914450521
}
],
"error":null
}
But the returned `url` is http-only and the updater can't download it (throws error). WhenI try to curl it without `-L` I only get `301 Moved Permanently`. Only when I append `-L` I get the correct binary response over https. I'm pretty sure this is a redirecting issue.
Here's my Nginx config:
Code:
server{
server_name MYDOMAIN;
server_tokens off;
listen 80;
listen [::]:80 ipv6only=on;
# Redirect all HTTP requests to HTTPS with a 301 Moved Permanently response.
return 301 https://$host$request_uri;
}
server {
server_name MYDOMAIN;
server_tokens off;
listen 443 ssl http2;
listen [::]:443 ssl http2 ipv6only=on;
location / {
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $http_host;
proxy_set_header X-NginX-Proxy true;
proxy_pass http://127.0.0.1:24087;
proxy_redirect off;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
}
add_header Strict-Transport-Security "max-age=15768000; includeSubdomains; preload";
add_header Referrer-Policy same-origin;
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options DENY;
add_header X-Xss-Protection "1; mode=block";
[...]
Any idea what I'm doing wrong?
Basically I want to know how to force the `url` response in the JSON to be `https` instead of `http`. (At least that's what I think is the reason for the updater not being able to download the image.)
Code:
08-30 16:00:19.407 7025 7025 D UpdaterController: Starting 50533a894b2ab0d9b2711444ca4f2b530a8ff2389723ea2bd7ada6e029599e2c
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: Error downloading file
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: java.io.IOException: Cleartext HTTP traffic to MYDOMAIN not permitted
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: at com.android.okhttp.HttpHandler$CleartextURLFilter.checkURLPermitted(HttpHandler.java:124)
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: at com.android.okhttp.internal.huc.HttpURLConnectionImpl.execute(HttpURLConnectionImpl.java:462)
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: at com.android.okhttp.internal.huc.HttpURLConnectionImpl.connect(HttpURLConnectionImpl.java:131)
08-30 16:00:19.409 7025 7921 E HttpURLConnectionClient: at org.lineageos.updater.download.HttpURLConnectionClient$DownloadThread.run(HttpURLConnectionClient.java:250)
08-30 16:00:19.409 7025 7921 E UpdaterController: Download failed
EDIT: Solved!
Code:
location / {
proxy_pass http://127.0.0.1:24087;
proxy_http_version 1.1;
proxy_cache_bypass $http_upgrade;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
#proxy_set_header Host $host;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_set_header X-Forwarded-Host $host;
proxy_set_header X-Forwarded-Port $server_port;
proxy_set_header X-NginX-Proxy true;
}
Not sure if this project is still supported, but with build.prop change, it just checks for updates forever on phone. When I try debugging with the UnitTest script, I get "Not Found The requested URL /CyanogenModOTA/api was not found on this server." (definitely server-related) I've gotten this working before on another VPS, so I'm wondering why it's not on my build server.
Are there any specific packages I need to install to get this working?
Here is my php config: http://hongbuild.ddns.net:81/test.php
klvnhng said:
Not sure if this project is still supported, but with build.prop change, it just checks for updates forever on phone. When I try debugging with the UnitTest script, I get "Not Found The requested URL /CyanogenModOTA/api was not found on this server." (definitely server-related) I've gotten this working before on another VPS, so I'm wondering why it's not on my build server.
Are there any specific packages I need to install to get this working?
Here is my php config: http://hongbuild.ddns.net:81/test.php
Click to expand...
Click to collapse
Since build.prop is in the system.new.dat file in lollipop builds, I just started copying it over from my build server and modified the Build.php file to look for the file instead of inside the zip. I just got this working on my web server. Only issue I'm having is related to change logs but I'm going to try and figure that one out later.
Here are the changes I did to get this working with CyanogenMod 12 (all changes will be assumed from the CyanogenModOTA directory):
- mkdir -p builds/buildprop <-- this is where you copy your build.prop from each build (they go in a folder with the same name as the build zip e.x. cm-12-20150103-NIGHTLY)
- mkdir -p builds/changelog <-- this will have your change logs (name them the same as the build zip except with a .txt extension)
- update setConfig( 'basePath', 'CyanogenModOTA' ) to setConfig( 'basePath', 'http://wfhome.net/CyanogenModOTA' ) in index.php (that is my server)
- change the Build constructor function to this (I updated the preg_match_all line, added the buildPropFolder variable, updated the $this->buildProp line, and changed the changeLogUrl line):
Code:
private $buildPropFolder = '';
public function __construct($fileName, $physicalPath) {
/*
$tokens Schema:
array(
1 => [CM VERSION] (ex. 10.1.x, 10.2, 11, etc.)
2 => [DATE OF BUILD] (ex. 20140130)
3 => [CHANNEL OF THE BUILD] (ex. RC, RC2, NIGHTLY, etc.)
4 => [MODEL] (ex. i9100, i9300, etc.)
)
*/
preg_match_all( '/cm-([0-9\.]+-)(\d+-)?([a-zA-Z0-9]+-)?([a-zA-Z0-9]+).zip/', $fileName, $tokens );
$tokens = $this->removeTrailingDashes( $tokens );
$this->filePath = $physicalPath . '/' . $fileName;
$this->buildPropFolder = str_replace('/full', '/buildprop', $physicalPath) . '/' . preg_replace('/\\.[^.\\s]{3,4}$/', '', $fileName);
$this->buildProp = explode( "\n", file_get_contents($this->buildPropFolder . '/build.prop') );
$this->channel = $this->_getChannel( str_replace( range( 0 , 9 ), '', $tokens[3] ) );
$this->filename = $fileName;
$this->url = $this->_getUrl( '', Flight::cfg()->get('buildsPath') );
$this->changelogUrl = str_replace('/full', '/changelog', $this->_getChangelogUrl());
$this->timestamp = filemtime( $this->filePath );
$this->incremental = $this->getBuildPropValue( 'ro.build.version.incremental' );
$this->apiLevel = $this->getBuildPropValue( 'ro.build.version.sdk' );
$this->model = $this->getBuildPropValue( 'ro.cm.device' );
}
Also he has memcached setup in there, so you might make sure you have memcache installed and set to run on startup on your server. You also need xdelta3 to create delta builds although, I don't think it is working ( I compiled the latest version of xdelta3 and it doesn't appear to do anything as there are not any files being created in the delta folder).
Hope that helps.
Thanks for the help (I'll definitely need it when I actually want to start USING the server), but it seems you've misunderstood me. Right now, I can't even get the rest server running properly-that's why I'm getting a 404 error.
Notice you get an output when you go to http://wfhome.net/CyanogenModOTA/api, I don't get anything!
klvnhng said:
Thanks for the help (I'll definitely need it when I actually want to start USING the server), but it seems you've misunderstood me. Right now, I can't even get the rest server running properly-that's why I'm getting a 404 error.
Notice you get an output when you go to http://wfhome.net/CyanogenModOTA/api, I don't get anything!
Click to expand...
Click to collapse
Ah sorry. First thing I see is that you need mod_rewrite installed in apache.
Code:
sudo a2enmod rewrite
sudo service apache2 restart
Need help with development
First I would like to thank you for using this product and playing with it (which involves patching, testing, etc.).
Since the first post I've made here in XDA the project evolved a little since I rewrote entirely the project to make it composer friendly. Rather than that, the Delta build process is actually non working (I tried to create a ZIP but I don't have enough knowledge in ROM development to tell if it's enough or not) so it's just a WIP layer that should be addressed and fixed (I've already found a Python project which does this already but I'm of the idea that this should be somehow not be a bloated software that needs to install binaries here and there to make it working).
So, actually I'm not really working in this project but It's in my TODO list, meanwhile I'll be very happy to have pull requests with useful patches to make this KK, LL and more compatible So feel free to contribute and thanks again for using it!
JulianXhokaxhiu said:
First I would like to thank you for using this product and playing with it (which involves patching, testing, etc.).
Since the first post I've made here in XDA the project evolved a little since I rewrote entirely the project to make it composer friendly. Rather than that, the Delta build process is actually non working (I tried to create a ZIP but I don't have enough knowledge in ROM development to tell if it's enough or not) so it's just a WIP layer that should be addressed and fixed (I've already found a Python project which does this already but I'm of the idea that this should be somehow not be a bloated software that needs to install binaries here and there to make it working).
So, actually I'm not really working in this project but It's in my TODO list, meanwhile I'll be very happy to have pull requests with useful patches to make this KK, LL and more compatible So feel free to contribute and thanks again for using it!
Click to expand...
Click to collapse
Thank YOU for making it! Really appreciate the time and effort you've put into this project.
rjwil1086 said:
Ah sorry. First thing I see is that you need mod_rewrite installed in apache.
Code:
sudo a2enmod rewrite
sudo service apache2 restart
Click to expand...
Click to collapse
That did it, thanks :good:
I've also implemented your changes, but when I check for updates on my phone, I still get "No new updates found". I've copied my new build over to builds/full, and the build.prop to builds/buildprop/cm*
rjwil1086 thank you very much for your help and suggestions, I made my own server http://paksman.ddns.net/cyanogenmodota, edited build.prop for cm updater to look for server url, made all the changes as you but I always get "No new updates found". Not sure if there is a problem with my server or with this project in general. Have you made any success to make this work?
I have it working. I'll upload mine to github tonight
Think I solved my own problem. My builds were all tagged as 'UNOFFICIAL'. When I changed this to 'NIGHTLY' (for the build and build.prop folder respectively ) they finally started to be recognised by cm updater app. JulianXhokaxhiu and rjwil1086, thank you so much for your effort,your work is being much appreciated.
Packsman said:
Think I solved my own problem. My builds were all tagged as 'UNOFFICIAL'. When I changed this to 'NIGHTLY' (for the build and build.prop folder respectively ) they finally started to be recognised by cm updater app. JulianXhokaxhiu and rjwil1086, thank you so much for your effort,your work is being much appreciated.
Click to expand...
Click to collapse
Yup. Sorry. I knew that but forgot to mention it. That's an issue with the CMUpdater app more than it is with the REST implementation. It doesn't look for unofficial files
Packsman said:
Think I solved my own problem. My builds were all tagged as 'UNOFFICIAL'. When I changed this to 'NIGHTLY' (for the build and build.prop folder respectively ) they finally started to be recognised by cm updater app. JulianXhokaxhiu and rjwil1086, thank you so much for your effort,your work is being much appreciated.
Click to expand...
Click to collapse
Awesome! This fixed it for me as well. Thanks to everyone for the help
[CyanogenMod][OTA][PHP] Open Source REST Server for you
Hi, I have been tested server code with a free host (000webhost) then accessed the web, I received messages:
Warning: Unexpected character in input: '\' (ASCII=92) state=1 in /home/a5885282/public_html/index.php on line 27
Parse error: syntax error, unexpected T_STRING, expecting T_CONSTANT_ENCAPSED_STRING or '(' in /home/a5885282/public_html/index.php on line 27
The line 27 of index.php is "use \JX\CmOta\CmOta;". But I don't know about PHP. Please help me solve this issue.
@rjwil1086 , @klvnhng , @Packsman please help me to solve following error:
$ node index.js
<h1>500 Internal Server Error</h1><h3>Undefined offset: 0 (8)</h3><pre>#0 /var/www/CyanogenModOTA/src/Helpers/Build.php(214): flight\Engine->handleError(8, 'Undefined offse...', '/var/www/Cyanog...', 214, Array)
#1 /var/www/CyanogenModOTA/src/Helpers/Build.php(63): JX\CmOta\Helpers\Build->removeTrailingDashes(Array)
#2 /var/www/CyanogenModOTA/src/Helpers/Builds.php(115): JX\CmOta\Helpers\Build->__construct('cm-11-20140103-...', '/var/www/Cyanog...')
#3 /var/www/CyanogenModOTA/src/Helpers/Builds.php(49): JX\CmOta\Helpers\Builds->getBuilds()
#4 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Loader.php(123): JX\CmOta\Helpers\Builds->__construct()
#5 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Loader.php(80): flight\core\Loader->newInstance('\JX\CmOta\Helpe...', Array)
#6 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/Engine.php(69): flight\core\Loader->load('builds', true)
#7 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(191): flight\Engine->__call('builds', Array)
#8 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(191): flight\Engine->builds()
#9 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/Flight.php(43): flight\core\Dispatcher::invokeMethod(Array, Array)
#10 /var/www/CyanogenModOTA/src/CmOta.php(97): Flight::__callStatic('builds', Array)
#11 /var/www/CyanogenModOTA/src/CmOta.php(97): Flight::builds()
#12 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(160): JX\CmOta\{closure}()
#13 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(143): flight\core\Dispatcher::callFunction(Object(Closure), Array)
#14 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/Engine.php(310): flight\core\Dispatcher::execute(Object(Closure), Array)
#15 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(191): flight\Engine->_start()
#16 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(142): flight\core\Dispatcher::invokeMethod(Array, Array)
#17 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(48): flight\core\Dispatcher::execute(Array, Array)
#18 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/Engine.php(64): flight\core\Dispatcher->run('start', Array)
#19 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(191): flight\Engine->__call('start', Array)
#20 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/core/Dispatcher.php(191): flight\Engine->start()
#21 /var/www/CyanogenModOTA/vendor/mikecao/flight/flight/Flight.php(43): flight\core\Dispatcher::invokeMethod(Array, Array)
#22 /var/www/CyanogenModOTA/src/CmOta.php(80): Flight::__callStatic('start', Array)
#23 /var/www/CyanogenModOTA/src/CmOta.php(80): Flight::start()
#24 /var/www/CyanogenModOTA/index.php(35): JX\CmOta\CmOta->run()
#25 {main}</pre>
Thank you so much.
Thanks all, I fixed.
[CyanogenMod][OTA][PHP] Open Source REST Server for you
I have just creat susscess a server. Thanks.
But, now I want creat a update OTA app for other AOSP ( andoird L) and using that server which I have just creat.
Can I using CMupdater for it? Can you give me some suggest?
Hi, need help to understand!
First of all, i want to say Thank You! For this great job!
I installed server, activated mod rewrite in apache2, apt-get install memcached, made chown for all files to www-data in CyanogenModOTA directory
created directories builds/buildprop, builds/changelog
created file romname.txt in changelog
copied file rom archive to build/full directory
and when i open in browser my ota site: http ota.mydomain.com i see the dir listing as described above
when i try to open url http ota.mydomain.com/api - i see the 404 error.
what exactly i have to do as the next step?
is any json file missed in web root directory (in same place as index.php) ?
and I leave index.php almost unchanged (as in the repository) - just changed string: ->setConfig( 'basePath', '/' )
Thank You once again!
vvzar said:
First of all, i want to say Thank You! For this great job!
I installed server, activated mod rewrite in apache2, apt-get install memcached, made chown for all files to www-data in CyanogenModOTA directory
created directories builds/buildprop, builds/changelog
created file romname.txt in changelog
copied file rom archive to build/full directory
and when i open in browser my ota site: http ota.mydomain.com i see the dir listing as described above
when i try to open url http ota.mydomain.com/api - i see the 404 error.
what exactly i have to do as the next step?
is any json file missed in web root directory (in same place as index.php) ?
and I leave index.php almost unchanged (as in the repository) - just changed string: ->setConfig( 'basePath', '/' )
Thank You once again!
Click to expand...
Click to collapse
Are you sure that modrewrite is working? Can you share a working URL?
lingak said:
I have just creat susscess a server. Thanks.
But, now I want creat a update OTA app for other AOSP ( andoird L) and using that server which I have just creat.
Can I using CMupdater for it? Can you give me some suggest?
Click to expand...
Click to collapse
Honestly I don't know, we have to check if OTA app is the same in Lollipop and works of course the same. If so, we're already safe and yes it can work out of the box. If not, we have to fix it. If you already have a working example, feel free to do a pull request
JulianXhokaxhiu said:
Are you sure that modrewrite is working? Can you share a working URL?
[email protected]:/home/user# a2enmod rewrite
Module rewrite already enabled
[email protected]:/home/user#
.htaccess:
[email protected]:/home/user# cat /var/www/html/CyanogenModOTA/.htaccess
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php [QSA,L]
[email protected]:/home/user#
Is any other rules i have to check?
What about statement <Directory /var/www/html/CyanogenModOTA> ?
Is enouph AllowOverride All and Allow from all ?
test url : http ota.smylink.org
Click to expand...
Click to collapse
vvzar said:
JulianXhokaxhiu said:
Are you sure that modrewrite is working? Can you share a working URL?
[email protected]:/home/user# a2enmod rewrite
Module rewrite already enabled
[email protected]:/home/user#
.htaccess:
[email protected]:/home/user# cat /var/www/html/CyanogenModOTA/.htaccess
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php [QSA,L]
[email protected]:/home/user#
Is any other rules i have to check?
What about statement <Directory /var/www/html/CyanogenModOTA> ?
Is enouph AllowOverride All and Allow from all ?
test url : http ota.smylink.org
Click to expand...
Click to collapse
Technically it should be enough but the order of where you placed it is important too.
Anyway, going to your URL is just making me think that the PHP code is running well (the redirect to builds folder is triggered by CMOTA Rest Code). You're just missing the htaccess rules.
I'm quite sure you just have to figure out your own server setup to understand if mod_rewrite is properly working (allowing htaccess files to be read and parsed).
Click to expand...
Click to collapse
friends I downloaded the binary opnevpn for use in android 2.3.6 the question is I downloaded the binary compile from linux, ubuntu.
using ndk, ndk-build a see compiled me tumulto a binary statico the tranfiero to the celulcar and use the settigns openvpn client to connect the server connects, but throw me a FATAL error Linux ip link set failed could not execute external program, and does not connect will put a screenshot of the error that happens when I compile the binary used binary by default works well , my goal by which compile the binary is to be able to add http custom headers, that only this habiliado on android 4.x on thank the assistance and/or sugernecia of this thank you. FOR YOUR ANSWER.
:crying::crying::crying:
my not allow upload image my error is := FATAL Linux ip link set failed could not execute external program :C
My guess is that it cannot execute /system/bin/ip or /system/xbin/ip (this is Android we're talking about, right?)
If I recalled correctly, that's a symlink to busybox, so try adding something like
#include [ipbinaryheader.h]
#include [busybox.h]
Into the c.
Replace [ ] with the sharp one
Disclaimer: I'm relatively new to programming, so please try it yourself and see if it works, I'm not sure.
I'll add more later when I have time.
Sent from my not-an-iPhone using Tapatalk
panpjp said:
My guess is that it cannot execute /system/bin/ip or /system/xbin/ip (this is Android we're talking about, right?)
If I recalled correctly, that's a symlink to busybox, so try adding something like
#include [ipbinaryheader.h]
#include [busybox.h]
Into the c.
Replace [ ] with the sharp one
Disclaimer: I'm relatively new to programming, so please try it yourself and see if it works, I'm not sure.
I'll add more later when I have time.
Sent from my not-an-iPhone using Tapatalk
Click to expand...
Click to collapse
If is so friend is android what am talking, but between as user root in system / bin / and look for, ip and if this in that directory I have a doubt I equal am new in ndk, in where added them header of c that you put excuse me my English and you agredezco always its helps
Hi there,
I have Samsung Galaxy Core Prime LTE and I could not find any custom ROMs so I decided that I will try to compile it myself. I downloaded the LineageOS source code from git (cm 14.1), the device trees and kernel from here: github/MSM8916-Samsung, and the samsung vendor files from the extraxt-files.sh script. The qcom-common files from here: github/CyanogenMod/android_device_samsung_qcom-common. Then I set up the environment (source build/envsetup.sh), ran breakfast and everything went fine. And then came brunch... It's running for about 40-50 minutes, and then stopes because "ninja: build stopped: subcommand failed". Here's the output from my terminal: https:/ /drive.google.com/fi le/d/0Bzbi _UspTWqac3ZkV2RhRjJGeW8/view?usp=drivesdk (remove spaces - sorry for that, but I cannot add links yet)
If the ninja log is needed I will post it.
Can someone help me to understand the code and find out why it is failing?
(I am new to developing stuff, but I have already compiled programs back in the days, and I am familiar with Linux, which is my daily driver)
what version of linux are you using at the moment?
Ubuntu 17.04, but I have also tried it on 16.10 last week, and openjdk-8
wasowski02 said:
Ubuntu 17.04, but I have also tried it on 16.10 last week, and openjdk-8
Click to expand...
Click to collapse
I can't speak for others but I have not had success building anything android on 15.10,16.04,16.10... I always end up on a wild goose chase with all the compiling errors. I have consistently compiled without errors using 14.04 with oracle java 8 as that is what many of the manufacturers are using to make their own builds. If or oracle spits errors with 14.04 i try to use the rule of thumb and thats openjdk-6 and jre for LP, openjdk-7 and jre for MM and openjdk-8 for nougat builds but im only working on MM builds at the moment so your results may vary. Hope this helps a bit, just remember you can use sudo update-alternatives --display java to switch versions on the fly if needed and make sure you incorporate Google prebuilts as well. good luck ?
Sent from my LGLS676 using Tapatalk
Sands207 said:
I can't speak for others but I have not had success building anything android on 15.10,16.04,16.10... I always end up on a wild goose chase with all the compiling errors. I have consistently compiled without errors using 14.04 with oracle java 8 as that is what many of the manufacturers are using to make their own builds. If or oracle spits errors with 14.04 i try to use the rule of thumb and thats openjdk-6 and jre for LP, openjdk-7 and jre for MM and openjdk-8 for nougat builds but im only working on MM builds at the moment so your results may vary. Hope this helps a bit, just remember you can use sudo update-alternatives --display java to switch versions on the fly if needed and make sure you incorporate Google prebuilts as well. good luck ?
Click to expand...
Click to collapse
Then I will try 14.04 and see what happens. Thanks for help
@Sands207 Is there by any chance a site where you can learn to do this? Tutorial for noobs of sort.
Sent from my SM-N920P using Tapatalk
ninja_unmatched said:
@Sands207 Is there by any chance a site where you can learn to do this? Tutorial for noobs of sort.
Click to expand...
Click to collapse
Yes, luckily for us xda members we have our own Android college built right into xda https://forum.xda-developers.com/general/xda-university its a great starting point and rom compiling guide is also there. Its all aimed to help new folks find their way ? jump right in ?
If you need TWRP for it I have it. It was built by blaz3r64, but since AA51 is down I can upload it for you. I can confirm that it works on both the ST Galaxy Core Prime and the Boost Prevail LTE.
Sent from my XT1609 using Tapatalk
RealWelder said:
If you need TWRP for it I have it. It was built by blaz3r64, but since AA51 is down I can upload it for you. I can confirm that it works on both the ST Galaxy Core Prime and the Boost Prevail LTE.
Click to expand...
Click to collapse
So I have already downloaded the official TWRP, but thanks for your interest.
I have tried to compile using ubuntu 14.04 (with openjdk-8) as @Sands207, but I get this error:
Code:
FAILED: /bin/bash -c "prebuilts/misc/linux-x86/bison/bison -d --defines=/home/karol/android/system/out/host/linux-x86/obj/STATIC_LIBRARIES/libaidl-common_intermediates/aidl_language_y.h -o /home/karol/android/system/out/host/linux-x86/obj/STATIC_LIBRARIES/libaidl-common_intermediates/aidl_language_y.cpp system/tools/aidl/aidl_language_y.yy"
/bin/bash: prebuilts/misc/linux-x86/bison/bison: No such file or directory
wasowski02 said:
So I have already downloaded the official TWRP, but thanks for your interest.
I have tried to compile using ubuntu 14.04 (with openjdk-8) as @Sands207, but I get this error:
Code:
FAILED: /bin/bash -c "prebuilts/misc/linux-x86/bison/bison -d --defines=/home/karol/android/system/out/host/linux-x86/obj/STATIC_LIBRARIES/libaidl-common_intermediates/aidl_language_y.h -o /home/karol/android/system/out/host/linux-x86/obj/STATIC_LIBRARIES/libaidl-common_intermediates/aidl_language_y.cpp system/tools/aidl/aidl_language_y.yy"
/bin/bash: prebuilts/misc/linux-x86/bison/bison: No such file or directory
Click to expand...
Click to collapse
I recommend trying this keychain as it has full support for what you are attempting https://forum.xda-developers.com/showthread.php?t=3606941 I have tried it myself but Id recommend cleaning your build folder before incorporating them, maybe even a reboot as well. i had forgotten about this but it has far more tools than the normal keychain.
Sent from my LGLS676 using Tapatalk
---------- Post added at 04:29 PM ---------- Previous post was at 04:22 PM ----------
remember to select the right architecture ??
Sent from my LGLS676 using Tapatalk
Sands207 said:
I recommend trying this keychain as it has full support for what you are attempting https://forum.xda-developers.com/showthread.php?t=3606941 I have tried it myself but Id recommend cleaning your build folder before incorporating them, maybe even a reboot as well. i had forgotten about this but it has far more tools than the normal keychain.
Sent from my LGLS676 using Tapatalk
---------- Post added at 04:29 PM ---------- Previous post was at 04:22 PM ----------
remember to select the right architecture ?
Click to expand...
Click to collapse
So I downloaded the new toolchain/keychain/cross compiler (just to make sure - this is the same, yes?), but I cannot find how to choose it to compile android. The official post says:
Code:
# for arm64
export CROSS_COMPILE=$(pwd)/bin/aarch64-linux-gnu-
but as I'm not compiling the kernel I assume it is not what I need (I think) and
Code:
echo $CROSS_COMPILE
does not return anything by default. If I should have used the export function then which file should I choose, because there are many (-strip, -strings, -size, -run, etc.).
There is a directory called toolchain (it contains only binutils) in the folder containing the source code. Should I add a folder called gcc and put the files there? Or maybe I have to run brunch with some options or change an entry in a configuration/make file?
I use the aarch64 version, but not the newest (20170515 not 20170520).
wasowski02 said:
So I downloaded the new toolchain/keychain/cross compiler (just to make sure - this is the same, yes?), but I cannot find how to choose it to compile android. The official post says:
but as I'm not compiling the kernel I assume it is not what I need (I think) and
does not return anything by default. If I should have used the export function then which file should I choose, because there are many (-strip, -strings, -size, -run, etc.).
There is a directory called toolchain (it contains only binutils) in the folder containing the source code. Should I add a folder called gcc and put the files there? Or maybe I have to run brunch with some options or change an entry in a configuration/make file?
I use the aarch64 version, but not the newest (20170515 not 20170520).
Click to expand...
Click to collapse
I do think as you said you will need to run brunch but resetting up your build & source environment to use the new keychain as you attempted to switch from one keychain to the other as well may help if this doesn't work as well take a look at your build configuration. rc file and make sure you don't have double entries or the new keychain missing i usually import the prebuilts i need as I am using arm architecture at the moment but i either download the individual keychain i need and place it in my source folder when i setup my build environment to be added to the build along with my sources before i run lunch because my source folder is untouched by me besides that at that point. I'll be home in an hour or so I'm going to see if i can track down some info to help you get untangled but i do recommend downloading the folder and making a gcc folder with the toolchain folder for arm64 as you said and and adding it to your build ensuring it is clean besides what you need and adding it then attempt to compile again.
I'm not sure if I should use aarch64. I have an armv7-a-neon (so 64-bit) and the internet says that aarch64 and arm64 is pretty much the same, but maybe I am wrong and I should use arm instead. But I think that does not matter until I put the new toolchain both to the aarch64 and arm directory (I guess the compilation process will choose the right one automatically). So I've put the compilers into prebuilts/gcc/linux-x86/... folders, but should I delete the old compilers? And then run the environment setup again (all this stuff starts to make sense to me ?)
Sent from my SM-G360F using Tapatalk
wasowski02 said:
I'm not sure if I should use aarch64. I have an armv7-a-neon (so 64-bit) and the internet says that aarch64 and arm64 is pretty much the same, but maybe I am wrong and I should use arm instead. But I think that does not matter until I put the new toolchain both to the aarch64 and arm directory (I guess the compilation process will choose the right one automatically). So I've put the compilers into prebuilts/gcc/linux-x86/... folders, but should I delete the old compilers? And then run the environment setup again (all this stuff starts to make sense to me )
Sent from my SM-G360F using Tapatalk
Click to expand...
Click to collapse
Yes you should delete the old ones and set up your enviroment again and it should include them. Also yes the compile proccess should pick the correct one in your case as long as you include them and you have, you are heading in the right direction for sure. :good:
Sands207 said:
Yes you should delete the old ones and set up your enviroment again and it should include them. Also yes the compile proccess should pick the correct one in your case as long as you include them and you have, you are heading in the right direction for sure. :good:
Click to expand...
Click to collapse
So I deleted the old ones and I get this error:
Code:
ninja: error: 'prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin/arm-linux-androideabi-strip', needed by '/home/karol/android/system/out/target/product/coreprimeltexx/obj/lib/libdl.so', missing and no known rule to make it
I guess it's because somewhere in a configuration file there is an entry for the old compiler. I have deleted the out directory and played with the envsetup.sh file (about line 210 there is something about compilers),
Code:
# defined in core/config.mk
targetgccversion=
targetgccversion2=
export TARGET_GCC_VERSION=$targetgccversion
# The gcc toolchain does not exists for windows/cygwin. In this case, do not reference it.
export ANDROID_TOOLCHAIN=
export ANDROID_TOOLCHAIN_2ND_ARCH=
local ARCH=$(get_build_var TARGET_ARCH)
case $ARCH in
x86) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin
;;
x86_64) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin
;;
arm) toolchaindir=arm/arm-linux-androideabi-$targetgccversion/bin
;;
arm64) toolchaindir=aarch64/aarch64-linux-android-$targetgccversion/bin;
toolchaindir2=arm/arm-linux-androideabi-$targetgccversion2/bin
;;
mips|mips64) toolchaindir=mips/mips64el-linux-android-$targetgccversion/bin
;;
*)
echo "Can't find toolchain for unknown architecture: $ARCH"
toolchaindir=xxxxxxxxx
;;
esac
but this did not work either. The ninja files don't contain any gcc configuration. So where can I find the right configuration file? (I can't find the suggested configuration.rc file)
wasowski02 said:
So I deleted the old ones and I get this error:
I guess it's because somewhere in a configuration file there is an entry for the old compiler. I have deleted the out directory and played with the envsetup.sh file (about line 210 there is something about compilers),
but this did not work either. The ninja files don't contain any gcc configuration. So where can I find the right configuration file?
Click to expand...
Click to collapse
I usually compile using clang or maven as I only build AOSP atm https://ninja-build.org/manual.html this page includes directions that should assist you. Do you have maven or clang installed on your linux box?
Sands207 said:
I usually compile using clang or maven as I only build AOSP atm https://ninja-build.org/manual.html this page includes directions that should assist you. Do you have maven or clang installed on your linux box?
Click to expand...
Click to collapse
So it seems that nor klang nor maven is installed on my machine (but as my computer claims ninja is not installed either I guess that they may be installed somewhere in the build directories). Should I try them instead of ninja?
wasowski02 said:
So it seems that nor klang nor maven is installed on my machine (but as my computer claims ninja is not installed either I guess that they may be installed somewhere in the build directories). Should I try them instead of ninja?
Click to expand...
Click to collapse
yes absolutely
Sands207 said:
yes absolutely
Click to expand...
Click to collapse
So what I understand is:
(1) Install maven or clang (let's say clang because I found it in the official ubuntu repository)
(2) Configure brunch to use clang instead of ninja
So I checked the internet if there are any options I can use with brunch to run clang, but I didn't find any. Also looked through the envsetup.sh file, but there is nothing there, or I missed it.
wasowski02 said:
So what I understand is:
(1) Install maven or clang (let's say clang because I found it in the official ubuntu repository)
(2) Configure brunch to use clang instead of ninja
So I checked the internet if there are any options I can use with brunch to run clang, but I didn't find any. Also looked through the envsetup.sh file, but there is nothing there, or I missed it.
Click to expand...
Click to collapse
tonight i will try doing some digging to see if i can help you. im away from my computer right now but ill do what i can. i would try would maven. clang assists with aosp primarily but maven should work for you as far as using a custom command to run maven, log out or reboot after you install it and run brunch as you normally would also please read this https://clang.llvm.org/comparison.html
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
SanHelios said:
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
Click to expand...
Click to collapse
lol i am looking for the same
check this out
vamsi209 said:
lol i am looking for the same
check this out
Click to expand...
Click to collapse
what shall i check out?
SanHelios said:
what shall i check out?
Click to expand...
Click to collapse
Extracting proprietary blobs from LineageOS zip files | LineageOS Wiki
wiki.lineageos.org
SanHelios said:
Hey, does anyone know how to get the propietary blobs out of the device? I'm kinda done with MIUI and i wanna try to compile some custom rom and maybe a legit twrp.
Click to expand...
Click to collapse
Trying to look for the Chinese tool to flash the unofficial TWRP, once I manage to do that will try help on grabbing those needed proprietary blobs. May need guide on how to pull the blobs, am still a noob
dan079 said:
Trying to look for the Chinese tool to flash the unofficial TWRP, once I manage to do that will try help on grabbing those needed proprietary blobs. May need guide on how to pull the blobs, am still a noob
Click to expand...
Click to collapse
Me too... TWRP is tricky, since it can only be done by this OneInject-function of TWRP, but it's possible. I tried the 'current' unofficial release of TWRP for this, but all i got was a reboot to BL.
vamsi209 said:
Extracting proprietary blobs from LineageOS zip files | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
yshalsager, who created the Firmware-script, told me the same.. here is his answer.
"
Hi,
Thanks for your words, glad to hear my work helps.
You can use LineageOS extract files script that will generate vendor tree for you. It is available in any device tree but you should use one of your device so it reads from its proprietary-files.txt or something.
"
Maybe LOS is closer than we think.
SanHelios said:
yshalsager, who created the Firmware-script, told me the same.. here is his answer.
"
Hi,
Thanks for your words, glad to hear my work helps.
You can use LineageOS extract files script that will generate vendor tree for you. It is available in any device tree but you should use one of your device so it reads from its proprietary-files.txt or something.
"
Maybe LOS is closer than we think.
Click to expand...
Click to collapse
niceee, so for mix 4, i extracted the twrp trees using this,
[SCRIPT] TWRP device tree generator
Create a TWRP-compatible device tree only from an Android recovery image (or a boot image if the device uses non-dynamic partitions A/B) of your device's stock ROM. It has been confirmed that this script supports images built starting from...
forum.xda-developers.com
setup the local repo for building twrp trees, using these
1. Installing the tools
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
tried building but the device doesn't lunch after following the steps shown above,
Code:
http://www.hastebin.com/jonexiyowu.md
and one of the dev https://github.com/imjyotiraditya , helped me build an aospa rom for g8x,
now he is on to building twrp for our device odin.
if anyone has twrp trees, we can try geting aospa build ready for our device
vamsi209 said:
niceee, so for mix 4, i extracted the twrp trees using this,
[SCRIPT] TWRP device tree generator
Create a TWRP-compatible device tree only from an Android recovery image (or a boot image if the device uses non-dynamic partitions A/B) of your device's stock ROM. It has been confirmed that this script supports images built starting from...
forum.xda-developers.com
setup the local repo for building twrp trees, using these
1. Installing the tools
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
tried building but the device doesn't lunch after following the steps shown above,
Code:
http://www.hastebin.com/jonexiyowu.md
and one of the dev https://github.com/imjyotiraditya , helped me build an aospa rom for g8x,
now he is on to building twrp for our device odin.
if anyone has twrp trees, we can try geting aospa build ready for our device
Click to expand...
Click to collapse
hey, i'm trying it right now... was able to manage a device tree from the latest weekly of the EU-rom. Repo is syncing right now for the aosp-twrp-11 repository.
U used the same script for the recovery trees?
vamsi209 said:
U used the same script for the recovery trees?
Click to expand...
Click to collapse
yes, i extracted it from the boot.img.
Update... build/envsetup.sh error, anyone any suggestions?
Update managed to get envsetup.sh to work, got following error messages
source build/envsetup.sh
including device/xiaomi/odin/vendorsetup.sh
COMMON_LUNCH_CHOICES: Befehl nicht gefunden.
COMMON_LUNCH_CHOICES: Befehl nicht gefunden.
lunch twrp_odin-eng
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/core/product_config.mk:155: error: Can not locate config makefile for product "twrp_odin".
23:22:04 dumpvars failed with: exit status 1
WARNING: Trying to fetch a device that's already there
Traceback (most recent call last):
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 431, in <module>
fetch_device(device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 399, in fetch_device
git_data = search_gerrit_for_device(device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 86, in search_gerrit_for_device
device_data = check_repo_exists(git_data, device)
File "/home/dave/AOSP-Recovery/vendor/twrp/build/tools/roomservice.py", line 62, in check_repo_exists
raise Exception("{device} not found,"
Exception: odin not found,exiting roomservice
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/core/product_config.mk:155: error: Can not locate config makefile for product "twrp_odin".
23:22:05 dumpvars failed with: exit status 1
** Don't have a product spec for: 'twrp_odin'
** Do you have the right repo manifest?
Anyone a good guess?
Did you had any luck, or any chance I can help?
Puksom said:
Did you had any luck, or any chance I can help?
Click to expand...
Click to collapse
well, i made some progress, but i failed again. I posted a thread in the official twrp forum. Maybe you might want to take a look at it.. thx.
Post in thread '[DEV]How to compile TWRP touch recovery' https://forum.xda-developers.com/t/dev-how-to-compile-twrp-touch-recovery.1943625/post-85686505
Puksom said:
Did you had any luck, or any chance I can help?
Click to expand...
Click to collapse
I'm a total beginner, so i might be wrong. But as far as i can tell, the makefiles of the extracted device tree need to be update or even completely rebuild.
Hi, it seems like I was able to execute the script successfully.
It didn't work on Windows because it got stuck on the execution of unpackimg.bat.
I ran it on Linux and it worked (after chmod 777 of boot.img). This is the command I ran:
python3 -m twrpdtgen -o ./odin ./boot.img
output:
Code:
TWRP device tree generator
Version 1.3.0
[INFO] Cloning AIK...
Done! You can find the device tree in odin/xiaomi/odin
I took boot.img from the latest MIUI 12.5.7.0 China Stable
Now I have what it seems to be the device tree (odin.zip) but I don't know what to do it it or what it is.
radoinc said:
Hi, it seems like I was able to execute the script successfully.
It didn't work on Windows because it got stuck on the execution of unpackimg.bat.
I ran it on Linux and it worked (after chmod 777 of boot.img). This is the command I ran:
python3 -m twrpdtgen -o ./odin ./boot.img
output:
Code:
TWRP device tree generator
Version 1.3.0
[INFO] Cloning AIK...
Done! You can find the device tree in odin/xiaomi/odin
I took boot.img from the latest MIUI 12.5.7.0 China Stable
Now I have what it seems to be the device tree (odin.zip) but I don't know what to do it it or what it is.
Click to expand...
Click to collapse
This is great, so we know this script works and does what it is supposed to do...
I checked the makefiles to see if there are any differences, but there are none. So it suggests that it doesn't matter, from which version you get the files from. I love, that the users of the Mi Mix 4 are more open so compiling than the community of the MI 11 Ultra is..
SanHelios said:
This is great, so we know this script works and does what it is supposed to do...
I checked the makefiles to see if there are any differences, but there are none. So it suggests that it doesn't matter, from which version you get the files from. I love, that the users of the Mi Mix 4 are more open so compiling than the community of the MI 11 Ultra is..
Click to expand...
Click to collapse
I'm trying to replicate your steps but I get the same "Can not locate config makefile for product "twrp_odin"." as you did above. In the other topic I see you managed to get past that step.
I see you get some output after executing envsetup.sh and it seems like this is related to the device tree.
Can you please share what you did with the device tree before attempting to compile twrp? I'd like to try myself but I can't find clear instructions.
radoinc said:
I'm trying to replicate your steps but I get the same "Can not locate config makefile for product "twrp_odin"." as you did above. In the other topic I see you managed to get past that step.
I see you get some output after executing envsetup.sh and it seems like this is related to the device tree.
Can you please share what you did with the device tree before attempting to compile twrp? I'd like to try myself but I can't find clear instructions.
Click to expand...
Click to collapse
Acutally i left it completely unchanged, the only thing i did was to change the repository. I deleted the aosp-repository and took the omni-twrp-repository
(https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni)
mkdir twrp
cd twrp
repo init -u git://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-10.0
repo sync
after syncing was complete, i followed these instructions
4. Build TWRP from source
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
SanHelios said:
Acutally i left it completely unchanged, the only thing i did was to change the repository. I deleted the aosp-repository and took the omni-twrp-repository
(https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni)
mkdir twrp
cd twrp
repo init -u git://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-10.0
repo sync
after syncing was complete, i followed these instructions
4. Build TWRP from source
A Python library/script to automatically generate TWRP-compatible device tree from a boot/recovery image - twrpdtgen/twrpdtgen
github-wiki-see.page
Click to expand...
Click to collapse
Thanks! Now I managed to get the same result as you. The error seems to be raised by mkbootimg.py:
Python:
def write_header(args):
BOOT_IMAGE_HEADER_V1_SIZE = 1648
BOOT_IMAGE_HEADER_V2_SIZE = 1660
BOOT_MAGIC = 'ANDROID!'.encode()
if (args.header_version > 2):
raise ValueError('Boot header version %d not supported' % args.header_version)
To me it seems like this Omni repo includes old version of mkbootimg.py, because in the google repos I can see that the current version of this function looks like this:
Python:
def write_header(args):
if args.header_version > 4:
raise ValueError(
f'Boot header version {args.header_version} not supported')
if args.header_version in {3, 4}:
return write_header_v3_and_above(args)
It seems like Boot header version 3 was introduced with Android 11: https://source.android.com/devices/bootloader/boot-image-header
I think we can't do much with the Omnia repos until they get updated with current mkbootimg.
radoinc said:
Thanks! Now I managed to get the same result as you. The error seems to be raised by mkbootimg.py:
Python:
def write_header(args):
BOOT_IMAGE_HEADER_V1_SIZE = 1648
BOOT_IMAGE_HEADER_V2_SIZE = 1660
BOOT_MAGIC = 'ANDROID!'.encode()
if (args.header_version > 2):
raise ValueError('Boot header version %d not supported' % args.header_version)
To me it seems like this Omni repo includes old version of mkbootimg.py, because in the google repos I can see that the current version of this function looks like this:
Python:
def write_header(args):
if args.header_version > 4:
raise ValueError(
f'Boot header version {args.header_version} not supported')
if args.header_version in {3, 4}:
return write_header_v3_and_above(args)
It seems like Boot header version 3 was introduced with Android 11: https://source.android.com/devices/bootloader/boot-image-header
I think we can't do much with the Omnia repos until they get updated with current mkbootimg.
Click to expand...
Click to collapse
My question is, do the makefiles from the devicetree need to be adjusted or completely rebuild to android 11 parameters? I.e. rhe command "add_lunch_combo" is obsolete and "COMMAND_LUNCH_CHOICES" took its place..
Sorry in advance for this nooby questions...