Hi all,
I feel noob. My Nexus 9 is giving "Internal device error" every time restart. I searched here at XDA and found that I need to flash VendorBuildFingerprintFix.zip but don't know what to do and how to do? Can anyone explain in detail.
Right now my Nexus 9 is on 5.1.1 stock rom with stock recovery and unrooted and unlocked. What steps should I follow. How to flash this vendor file? I am aware of flashing using adb and fastboot so please help.
Thanks in advance.
shahidhussain said:
Hi all,
I feel noob. My Nexus 9 is giving "Internal device error" every time restart. I searched here at XDA and found that I need to flash VendorBuildFingerprintFix.zip but don't know what to do and how to do? Can anyone explain in detail.
Right now my Nexus 9 is on 5.1.1 stock rom with stock recovery and unrooted and unlocked. What steps should I follow. How to flash this vendor file? I am aware of flashing using adb and fastboot so please help.
Thanks in advance.
Click to expand...
Click to collapse
Download the 5.1.1 factory image from Google.
Extract the contents. Buried inside is the vendor.img file. Put it in same file where fastboot is. Boot your N9 to bootloader, and open a command prompt. Type> fastboot flash vendor vendor.img
Reboot
cam30era said:
Download the 5.1.1 factory image from Google.
Extract the contents. Buried inside is the vendor.img file. Put it in same file where fastboot is. Boot your N9 to bootloader, and open a command prompt. Type> fastboot flash vendor vendor.img
Reboot
Click to expand...
Click to collapse
Thanks a lot. Problem solved. Thank very much. Much appreciated
shahidhussain said:
Thanks a lot. Problem solved. Thank very much. Much appreciated
Click to expand...
Click to collapse
Welcome. I'm glad you got it fixed.
Can you provide me only vendor.img file
Thanks alot
inderlover said:
Can you provide me only vendor.img file
Thanks alot
Click to expand...
Click to collapse
It's about 140MB. Too large to attach to a post here. Can't you download the factory image and extract it?
cam30era said:
It's about 140MB. Too large to attach to a post here. Can't you download the factory image and extract it?
Click to expand...
Click to collapse
OK I will download
Thanks for the help.
Sent from my Nexus 9 using Tapatalk
inderlover said:
OK I will download
Thanks for the help.
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
I have to flash the Vendor Fix every time I flash Dirty Unicorn.
Maybe theirs will work for you too?
It's linked to in their OP:
http://forum.xda-developers.com/nex...m-dirty-unicorns-5-0-2-flounder-1-22-t3009783
Seem to be stuck on the Google window. Suggestions?
jcjoker2008 said:
Seem to be stuck on the Google window. Suggestions?
Click to expand...
Click to collapse
Someone may be able to help you. But only if you provide a lot more information:
More specific description of your problem.
State of device? i.e. bootloader unlocked..
TWRP recovery installed?
Which N9?
Which ROM?
What modifications? i.e. root, xposed, etc
What were you trying to change?
What actions were you doing just before your problem?
Related
Hello
After searching the internet for good 30-40 minutes I found the Stock OnePlus 2 recovery image. I am returning my unit so needed it to be fully stock.
Download: https://www.dropbox.com/s/8np35kw71i222as/OPT Stock Recovery.7z?dl=0
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Been searching for this for past hour!!!!!!
Hi,
Thank you very much.
I'm also returning my phone to oneplus and i had unlocked and rooted the phone like you.
May i know how you restore the stock ROM and recovery?
thank you
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
granfot said:
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
werthechamp said:
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
Click to expand...
Click to collapse
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
granfot said:
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Is this the recovery of the international version or chinese?
thx
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
CafeKampuchia said:
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
Click to expand...
Click to collapse
Problem: The signed flashable zips don't contain recovery.img
Spannaa said:
Problem: The signed flashable zips don't contain recovery.img
Click to expand...
Click to collapse
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
CafeKampuchia said:
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
Click to expand...
Click to collapse
I Installed the 2.0 manually...then update ota...now I have stock recovery.
zat0x said:
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
Click to expand...
Click to collapse
Hey, I don't know if you ever found the stock recovery but another member had posted fastboot images in the OnePlus2 Android Development section.
I haven't tested out the recovery myself, but you can check to see if it's the English one.
All Fastboot images: https://www.androidfilehost.com/?w=files&flid=40701
Stock Recovery Image: https://www.androidfilehost.com/?fid=24052804347834210
Hope this helps.
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
Good question! Want to know that too...
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
1:
Flash the full stock rom from OxygenOS 2.1.1: http://forum.xda-developers.com/showthread.php?t=3209863
2: Flash the OxygenOS 2.1.2 zip from the same post
3: flash the stock recovery from tgis thread
Hope I helped you
Download OP2 Stock Recovery from Official Site: https://s3.amazonaws.com/oxygenos.oneplus.net/OP2_recovery.img
It seems OnePlus uses AWS to host all of their OTA's.
E.G. https://s3.amazonaws.com/oxygenos.oneplus.net/OnePlus2Oxygen_14_OTA_012_all_1602261837.zip ( This is for OxygenOS 2.2.1 releases in 2012 26th Feb - 970MB )
Recent ROM Downloads of OP2: http://downloads.oneplus.net/devices/oneplus-2/ ( Includes Marshmallow Beta OxygenOS 3.0 , however, seems the ROM has Battery issue, major )
matrixdefalco said:
I Installed the 2.0 manually...then update ota...now I have stock recovery.
Click to expand...
Click to collapse
I did the same thing and it worked for me If somebody is still facing this issue
anyone knows how the flash the stock recovery from mac???
krishp said:
anyone knows how the flash the stock recovery from mac???
Click to expand...
Click to collapse
One "?" is enough dude..
You have to install adb for Mac (http://stackoverflow.com/questions/31374085/installing-adb-on-mac-os-x), enable USB Debugging on your phone, reboot into bootloader mode :
Code:
adb reboot-bootloader
then go into:
Code:
su
and then
Code:
fastboot devices
fastboot flash <recovery_name>.img
TL;DR: Nexus 9 bootloops with every ROM other than stock.
My Nexus 9 will bootloop whenever any custom ROM is installed on it. I follow the usual steps in TWRP (downloading ROM and Gapps, wiping factory reset, flashing the zips and wipe dalvik/cache) will not get any error during installation and regardless of the ROM, I will get my nexus stuck on Google logo. Then I will have to unroot and install stock again and it'll work.
Ive also tried Wugfresh Nexus Root Toolkit and it won't work either. As long as Im on stock, I can root as well and everything is fine.
Any idea what could be happening? I wanna get rid of the damn lag. Have tried Cyanogenmod, Slimrom6 and Pure Nexus Project. All with their recommended gapps and will always end up with my tablet stuck in the Google logo.
Any help is very appreciated.
Sounds like you are doing everything right..
How long are you waiting for the device to start up ? Is it possible you aren't simply waiting long enough ? I'd give it a good 10 - 20 minutes on 1st boot before deciding it's hung in a boot loop.
I am having the exact same problem. I have tried so many roms that install correctly and then when flashing gapps and rebooting it is stuck on the Google logo. And I left my tablet on for a few hours so its definitely bootlooping.
The only thing that comes to mind is bootloader... If you coming to androind 7.x from android 6.x, you need to flash new bootloader (for example via ADB), otherwise you'll end up in a bootloop.
yup, happening to me too. so, how can i flash the factory image now? thanks.
It's in the stickies. http://forum.xda-developers.com/nexus-9/general/guide-how-to-unlock-bootloader-flash-t3035153
Sent from my Nexus 5X using XDA-Developers mobile app
links to 7.x compatible bootloader where?
maelfilk said:
If you coming to androind 7.x from android 6.x, you need to flash new bootloader (for example via ADB), otherwise you'll end up in a bootloop.
Click to expand...
Click to collapse
I understand that i'll have to use adb (actually fastboot) to flash the bootloader. But where do i get the right one for android 7.x and flpunder device?
Could you please post the links for that?
Thanks in advance!
nexacan said:
I understand that i'll have to use adb (actually fastboot) to flash the bootloader. But where do i get the right one for android 7.x and flpunder device?
Could you please post the links for that?
Thanks in advance!
Click to expand...
Click to collapse
You can download the necessary image here: https://developers.google.com/android/images
Inside the archive you'll find bootloader and vendor
bootloader flashing process: enough to "fastboot flash bootloader boot*.img"?
maelfilk said:
You can download the necessary image here: https://developers.google.com/android/images
Inside the archive you'll find bootloader and vendor
Click to expand...
Click to collapse
I assume i need the latest 7.0.0 (NRD91N, Nov 2016) bootloader which is inside the latest build?
Then i will need to go through the process like:
Code:
fastboot flash bootloader bootloader-flounder-3.48.0.0141.img
Or do i have to do more like described here (Steps 8-9)?
Your help is appreciated, thanks again!
ps: for others who got stuck in the bootloop and don't know how to stop it or turn off the device:
1. reboot into recoverymode in case you have twrp
2. open a terminal
3. type in
Code:
poweroff
an hit enter
Yes, NRD91N
Well , all i did was simple
fastboot flash bootloader bootloader-flounder-3.48.0.0141.img
once complete
fastboot reboot-bootloader
That's it
Still not booting...
maelfilk said:
Yes, NRD91N
fastboot flash bootloader bootloader-flounder-3.48.0.0141.img
fastboot reboot-bootloader
...
That's it
Click to expand...
Click to collapse
Thanks for clarifying that. Unfortunately i still can't boot into AOSP_flounder_11-18-2016.zip
which i flashed afterwards. The bootloader is shown correctly though. But when i start the
Nexus 9 the message https://g.co/ABH is shown in red.
Which rom are you running? A CM build or AOSP?
ps: trying with cm-14.1-20161027-UNOFFICIAL-flounder.zip now, but boot seems to hang too and the upper part
of the Nexus 9 is getting really warm. I will leave it for 15 more minutes to wait and see what happens.
nexacan said:
Thanks for clarifying that. Unfortunately i still can't boot into AOSP_flounder_11-18-2016.zip
which i flashed afterwards. The bootloader is shown correctly though. But when i start the
Nexus 9 the message https://g.co/ABH is shown in red.
Which rom are you running? A CM build or AOSP?
Click to expand...
Click to collapse
Hmm sorry i don't knwo why this is happening.
Currently i reverted back to marshmallow roms, i find them more stable.
Do you have twrp? After flashing bootloader i go to twrp and do complete wipe and format data, then flash new rom. I had no problems booting.
maelfilk said:
Do you have twrp?
Click to expand...
Click to collapse
Sure, the latest from TWRP
twrp-3.0.2-1-flounder.img 13M 2016-08-24 16:30:03 EDT
maelfilk said:
After flashing bootloader i go to twrp and do complete wipe and format data, then flash new rom. I had no problems booting.
Click to expand...
Click to collapse
I will try it again - exactly as you describe it. Maybe i missed a step.
How long did you wait after reboot for the system to start up?
nexacan said:
Sure, the latest from TWRP
twrp-3.0.2-1-flounder.img 13M 2016-08-24 16:30:03 EDT
I will try it again - exactly as you describe it. Maybe i missed a step.
How long did you wait after reboot for the system to start up?
Click to expand...
Click to collapse
About 10-15 minutes
It works now!
Thank you maelfilk, i got i running now.
CM boots properly now - though i cannot configure it. During the Setup process
in the first step of selecting the language it crashes. I am sure this will be fixed
with a later version of CM-14.1.
Does someone know any other source for CM-14.1 for flounder?
Meanwhile i will try AOSP again.
Edit: AOSP boots properly but unfortunately WLAN does not work in the AOSP_flounder_11-18-2016.zip build.
I guess this is why you stick to the 6.x builds maelfilk.
большое спасибо
nexacan said:
большое спасибо
Click to expand...
Click to collapse
Glad it works
As for wlan problem, did you flash the vendor as well? If not it might be the problem
link to the "vendor"
maelfilk said:
Glad it works
As for wlan problem, did you flash the vendor as well? If not it might be the problem
Click to expand...
Click to collapse
Man, you are so helpfull! Where do i find the "vendor" (drivers?) please?
I guess i will find it as it is described here
nexacan said:
Man, you are so helpfull! Where do i find the "vendor" (drivers?) please?
I guess i will find it as it is described here
Click to expand...
Click to collapse
In the archive with bootloader is another archive with vendor and other images. Just flash it in twrp as in the instructions in the link you gave. If you have trouble with wlan or camera it usually means that vendor is outdated.
Black bootscreen and hanging after flashing vendor.img (only vendor.img)
maelfilk said:
In the archive with bootloader is another archive with vendor and other images. Just flash it in twrp as in the instructions...
Click to expand...
Click to collapse
I did that and now there is no bootscreen, and the Nexus 9 does not boot up
Maybe i am missing something again? I did a wipe and fresh install, but that did not help.
Also TWRP disappears after flashing vendor.img
nexacan said:
I did that and now there is no bootscreen, and the Nexus 9 does not boot up
Maybe i am missing something again? I did a wipe and fresh install, but that did not help.
Also TWRP disappears after flashing vendor.img
Click to expand...
Click to collapse
Are you sure you chose to flash vendor.img in vendor partition in twrp?
Hi Guys,
I've got a SGP511 WiFi only (castor_windy), with root access and an unlocked bootloader. but to install AOSP 7.1 I need to update my version of TWRP to 3.0.0.
I installed TWRP via TabZ2-lockeddualrecovery2.8.26 batch file and can access recovery but every time i select install look at my SD card and change to images and select the castor_winsy 3.0.0 image i dont get an option to install to recovery i only get kernel how do i resolve this ?
I have re flashed FW (KitKat) via flashtool loads of times
rooted
installed TabZ2-lockeddualrecovery2.8.26 batch file
and every time i get the same option.... cant flash to recovery or boot only kernel
i have attached a screenshot so that nobody thinks i am going mad
can you please help me thanks :fingers-crossed:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
T4ke5 said:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
Click to expand...
Click to collapse
Hi ... Is that using the ADB fastboot recovery TWRP.img?
I am on KitKat just wondering if that's why it won't work have you got to be on 6.01 ?
Well, actually it shouldn't matter on which Android version you are, but to have the latest boot.img and radio.img installed I'd flash the latest stock ROM available here on XDA which means by the way having TWRP 3.0.2.0 as well and after that you might be ready for AOSP 7.1
Just have look at kulvertti's thread in the "General" subforum. Since you have already intalled a custom recovery there shouldn't be any problems.
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
rcstar6696 said:
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
Click to expand...
Click to collapse
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
nickbaker66 said:
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
Hi @rcstar6696,
i had no problem flashing the boot.img that part was ok but when i went to flash the recovery it never seemed to work for me, in the terminal window in the SDK programme tools folder which is the same folder as the image i downloaded from your thread is in (Twrp-3.0.0-0-castor-windy.img and twrp_castor_windy.img) it said something about sizes but said it went ok tried to boot into recovery and it never worked
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
i am currently on Kitkat does this matter
thansk
nickbaker66 said:
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
thansk
Click to expand...
Click to collapse
The right command is
fastboot flash recovery PathToRecovery*
Click to expand...
Click to collapse
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers guys I'll give that a go
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
hi guys i tried what you said and still could get it to work, please see screenshot and check if i have entered something wrong, i dont thinki have but i might be wrong
is it because i have not done the boot image first via fastboot ?
Looks quite good. Did you already try to enter the recovery?
T4ke5 said:
Looks quite good. Did you already try to enter the recovery?
Click to expand...
Click to collapse
i tried to access recovery via the down volume button when the tablet starts up but no green light appears and it just starts normally ...... i ve not flashed the boot.img first then flashed recovery as ive seen it can be done via recovery the only option left now is to try flashing the boot.img first .... i have no option but to try that tonight and see if that can do it that way
@T4ke5 @rcstar6696 thanks very much guys for your help TWRP on 3.0.0 now and AOSP 7.1 installed now
Sweet! :good:
T4ke5 said:
Sweet! :good:
Click to expand...
Click to collapse
Don't laugh but I can't put my WiFi code in because there's no keyboard just tap to speak how can I have the keyboard back lol
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers mate worked a treat
Before moving forward, you must understand that if anything happens with your device, I'm not to be blamed on, you choose to flash this
Hey guys, so a friend of mine bricked his OnePlus2 to a state that his recovery wasn't working (wiped) and also his ROM was bootlooping. So I thought of this little trick to convert the latest full OTA zip file into fastboot flashable stock ROM files by converting the system.new.dat into system sparse image. Though my friend recovered his phone by flashing recovery and sideloading zip. I still think it would be a good idea to share here
Download: OOS 3.5.8
Requirements: must have fastboot
Must have fastboot drivers
Must have knowledge on how to use these commands
Note: this is not rooted or tampered with, with this system firmware you should be able to get OTAs
Happy unbricking!
Nice, might become useful
Thanks
MZO said:
Before moving forward, you must understand that if anything happens with your device, I'm not to be blamed on, you choose to flash this
Hey guys, so a friend of mine bricked his OnePlus2 to a state that his recovery wasn't working (wiped) and also his ROM was bootlooping. So I thought of this little trick to convert the latest full OTA zip file into fastboot flashable stock ROM files by converting the system.new.dat into system sparse image. Though my friend recovered his phone by flashing recovery and sideloading zip. I still think it would be a good idea to share here
Download: OOS 3.5.8
Requirements: must have fastboot
Must have fastboot drivers
Must have knowledge on how to use these commands
Note: this is not rooted or tampered with, with this system firmware you should be able to get OTAs
Happy unbricking!
Click to expand...
Click to collapse
Got a
no file in this folder
Click to expand...
Click to collapse
when clicking the link.
casual_kikoo said:
Got a
when clicking the link.
Click to expand...
Click to collapse
Try again, the file seemed to be removed because something happened to the backend servers of AFH
Hey man. Can I still do this if my device is locked. Whenever I try to flash twrp recovery it will display unable to patch image device is locked.
Hope you can help me Bro. Thank you! ?
conqueror_25 said:
Hey man. Can I still do this if my device is locked. Whenever I try to flash twrp recovery it will display unable to patch image device is locked.
Hope you can help me Bro. Thank you! [emoji4]
Click to expand...
Click to collapse
No you can't flash images while you're locked, use fastboot oem unlock to unlock your bootloader
Thank you for your prompt response mate.
Please allow me to post my problem here with my phone.
* Hi everyone. Hope somebody can help me restore my phone again. I have successfully unlocked the bootloader of my phone but I cannot boot to Rom. Every time I power on the phone it will boot to CM stock recovery. Tried to flash TWRP recovery but unable to write image. Device is locked. Did some research and found out the reason behind this is I did not unable update to CM Recovery in Developer Options.
What is the best way to resolve this issue? I still have access to Fastboot and can do ADB commands but device is locked.
Will sideloading a stock CM OP2 Rom will fix the issue? I'm also concerned with the draining of the battery, if I cannot turn on because no more charge already.
I'm using Mac computer but I can borrow a windows laptop to fix this.
Any help will be highly appreciated..
Thank you very much in advance guys!
God bless!
conqueror_25 said:
Thank you for your prompt response mate.
Please allow me to post my problem here with my phone.
* Hi everyone. Hope somebody can help me restore my phone again. I have successfully unlocked the bootloader of my phone but I cannot boot to Rom. Every time I power on the phone it will boot to CM stock recovery. Tried to flash TWRP recovery but unable to write image. Device is locked. Did some research and found out the reason behind this is I did not unable update to CM Recovery in Developer Options.
What is the best way to resolve this issue? I still have access to Fastboot and can do ADB commands but device is locked.
Will sideloading a stock CM OP2 Rom will fix the issue? I'm also concerned with the draining of the battery, if I cannot turn on because no more charge already.
I'm using Mac computer but I can borrow a windows laptop to fix this.
Any help will be highly appreciated..
Thank you very much in advance guys!
God bless!
Click to expand...
Click to collapse
This is weird. You should start a new thread about ut
I already did. Thanks man. Appreciate your reply. ?
Where is the fastboot command it is not visible
niteshnandi said:
Where is the fastboot command it is not visible
Click to expand...
Click to collapse
You have to install fastboot and adb from
https://forum.xda-developers.com/showthread.php?t=2588979
[TOOL] [WINDOWS] ADB, Fastboot and Drivers -… | Android ...
Hi @MZO,
After downloading https://androidfilehost.com/?w=files&flid=169179, the file seemed corrupted, since it seems that the file could not be fully extracted.
Please kindly verify it.
Thanks.
Hello everyone! I'm new on XDA and this is my first thread.
So, I've been messing around with my Honor 7 lately. I've flashed a custom recovery (TWRP), flashed a custom ROM (Unofficial CM13 for Honor 7: https://forum.xda-developers.com/honor-7/development/unsupported-cyanogenmod-13-honor-7-plk-t3542627) and root (SuperSU) and I've started to regret all of my decisions so I would like to take a fresh start (AKA flashing the STOCK ROM/Firmware)
Now, before anyone starts redirecting me to other (similar) threads, I've tried a lot. I tried to flash the stock recovery (a lot of different versions) but still when I try to boot into the stock recovery, my phone just reboots. I tried to do the force update thing (holding both power + & - buttons: http://www.gogorapid.com/flash-stock-rom-huawei-honor-7/), but this combination just boots my phone into TWRP. Could it be that I'm doing something wrong or that I'm missing something, like some requirements that are not being met? Please help me, I would appreciate it a lot! Thanks in advance.
LoRikU said:
Hello everyone! I'm new on XDA and this is my first thread.
So, I've been messing around with my Honor 7 lately. I've flashed a custom recovery (TWRP), flashed a custom ROM (Unofficial CM13 for Honor 7: https://forum.xda-developers.com/ho...upported-cyanogenmod-13-honor-7-plk-t3542627) and root (SuperSU) and I've started to regret all of my decisions so I would like to take a fresh start (AKA flashing the STOCK ROM/Firmware)
Now, before anyone starts redirecting me to other (similar) threads, I've tried a lot. I tried to flash the stock recovery (a lot of different versions) but still when I try to boot into the stock recovery, my phone just reboots. I tried to do the force update thing (holding both power + & - buttons: http://www.gogorapid.com/flash-stock-rom-huawei-honor-7/), but this combination just boots my phone into TWRP. Could it be that I'm doing something wrong or that I'm missing something, like some requirements that are not being met? Please help me, I would appreciate it a lot! Thanks in advance.
Click to expand...
Click to collapse
It seems that you didn't flash the stock recovery properly.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
It seems that you didn't flash the stock recovery properly.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply!
Could it be? I booted my phone into bootloader (unlocked) and flashed stock recovery with adb using the command "fastboot flash recovery recovery.img". I tried a variety of versions (from B100 up to B330 I think), but none of them seemed to work. What am I doing wrong?
LoRikU said:
Thanks for the reply!
Could it be? I booted my phone into bootloader (unlocked) and flashed stock recovery with adb using the command "fastboot flash recovery recovery.img". I tried a variety of versions (from B100 up to B330 I think), but none of them seemed to work. What am I doing wrong?
Click to expand...
Click to collapse
did you tried the offical TWRP of ypur device?
venugopalu007 said:
did you tried the offical TWRP of ypur device?
Click to expand...
Click to collapse
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
LoRikU said:
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
Click to expand...
Click to collapse
Download stock recovery and boot your phone to fastboot and
in command --- Fastboot flash recovery xxxfilenamexxx.img
LoRikU said:
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
Click to expand...
Click to collapse
Grab the stock recovery file for your device. You can flash inside TWRP itself.
adriansticoid said:
Grab the stock recovery file for your device. You can flash inside TWRP itself.
Click to expand...
Click to collapse
Koriki extract the firmware using huaweiupdateextractor
venugopalu007 said:
Koriki extract the firmware using huaweiupdateextractor
Click to expand...
Click to collapse
Koriki?
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Koriki?
Click to expand...
Click to collapse
Loriki is user name of op
Sorry my keyboard auto corrected it to koriki
venugopalu007 said:
Download stock recovery and boot your phone to fastboot and
in command --- Fastboot flash recovery xxxfilenamexxx.img
Click to expand...
Click to collapse
I tried that, read my second post on this thread. It didn't work, I didn't know which version I had to use. I ended up with a bootloop on various versions as mentioned in one of my first posts.
adriansticoid said:
Grab the stock recovery file for your device. You can flash inside TWRP itself.
Click to expand...
Click to collapse
Alright, I will try this. As soon as I get back home since the wifi here sucks.
venugopalu007 said:
Koriki extract the firmware using huaweiupdateextractor
Click to expand...
Click to collapse
I planned on doing this though I don't know where I can get the firmware for my H7... Could you perhaps provide me a link? It would be very kind of you (+ The wifi here sucks, so I will try downloading firmwares when I get home)