Hello
After searching the internet for good 30-40 minutes I found the Stock OnePlus 2 recovery image. I am returning my unit so needed it to be fully stock.
Download: https://www.dropbox.com/s/8np35kw71i222as/OPT Stock Recovery.7z?dl=0
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Been searching for this for past hour!!!!!!
Hi,
Thank you very much.
I'm also returning my phone to oneplus and i had unlocked and rooted the phone like you.
May i know how you restore the stock ROM and recovery?
thank you
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
granfot said:
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
werthechamp said:
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
Click to expand...
Click to collapse
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
granfot said:
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Is this the recovery of the international version or chinese?
thx
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
CafeKampuchia said:
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
Click to expand...
Click to collapse
Problem: The signed flashable zips don't contain recovery.img
Spannaa said:
Problem: The signed flashable zips don't contain recovery.img
Click to expand...
Click to collapse
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
CafeKampuchia said:
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
Click to expand...
Click to collapse
I Installed the 2.0 manually...then update ota...now I have stock recovery.
zat0x said:
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
Click to expand...
Click to collapse
Hey, I don't know if you ever found the stock recovery but another member had posted fastboot images in the OnePlus2 Android Development section.
I haven't tested out the recovery myself, but you can check to see if it's the English one.
All Fastboot images: https://www.androidfilehost.com/?w=files&flid=40701
Stock Recovery Image: https://www.androidfilehost.com/?fid=24052804347834210
Hope this helps.
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
Good question! Want to know that too...
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
1:
Flash the full stock rom from OxygenOS 2.1.1: http://forum.xda-developers.com/showthread.php?t=3209863
2: Flash the OxygenOS 2.1.2 zip from the same post
3: flash the stock recovery from tgis thread
Hope I helped you
Download OP2 Stock Recovery from Official Site: https://s3.amazonaws.com/oxygenos.oneplus.net/OP2_recovery.img
It seems OnePlus uses AWS to host all of their OTA's.
E.G. https://s3.amazonaws.com/oxygenos.oneplus.net/OnePlus2Oxygen_14_OTA_012_all_1602261837.zip ( This is for OxygenOS 2.2.1 releases in 2012 26th Feb - 970MB )
Recent ROM Downloads of OP2: http://downloads.oneplus.net/devices/oneplus-2/ ( Includes Marshmallow Beta OxygenOS 3.0 , however, seems the ROM has Battery issue, major )
matrixdefalco said:
I Installed the 2.0 manually...then update ota...now I have stock recovery.
Click to expand...
Click to collapse
I did the same thing and it worked for me If somebody is still facing this issue
anyone knows how the flash the stock recovery from mac???
krishp said:
anyone knows how the flash the stock recovery from mac???
Click to expand...
Click to collapse
One "?" is enough dude..
You have to install adb for Mac (http://stackoverflow.com/questions/31374085/installing-adb-on-mac-os-x), enable USB Debugging on your phone, reboot into bootloader mode :
Code:
adb reboot-bootloader
then go into:
Code:
su
and then
Code:
fastboot devices
fastboot flash <recovery_name>.img
Related
here are the latest cwm/twrp recoveries made by dhacker29 in recovery flashable format:
https://drive.google.com/folderview?id=0B-53iD-71B3iTWhzNVc0QkdJSkk&usp=sharing
they can't be flashed with stock recovery, can be flashed only with existing cwm/twrp. if you're unlocked but running stock recovery, they can be flashed with safestrap.
all thanks to dhacker29!
source: http://androidhosting.org/Devs/Dhacker29/MotoX/
So instead of using rsd to go back to stock, we can flash this as we would a custom ROM?
I can't seem to update TWRP, trying to flash using my current version of TWRP.
Sent from my XT1060 using Tapatalk
Thank you very much
Edit: I just fastbooted in TWRP 2.6.3.2 but when in TWRP it shows 2.6.3.0 still. It said it updated though through fastboot.
mroneeyedboh said:
So instead of using rsd to go back to stock, we can flash this as we would a custom ROM?
Click to expand...
Click to collapse
no, these zips update your cwm/twrp recovery to the latest version. if you want to avoid using rsd, make a nandroid of your stock unmodified system.
DonKilluminati23 said:
I can't seem to update TWRP, trying to flash using my current version of TWRP.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
what is the problem, did the flash fail? did you reboot recovery after installing?
rebretz000 said:
Thank you very much
Edit: I just fastbooted in TWRP 2.6.3.2 but when in TWRP it shows 2.6.3.0 still. It said it updated though through fastboot.
Click to expand...
Click to collapse
i have no idea what the problem could be. i flashed the new twrp with cwm, rebooted recovery, and it shows 2.6.3.2.
you did extract the recovery.img from the zip before fastbooting, correct?
you know what, i downloaded the img file from DHackers Android Hosting. Let me download the ZIP file and flash it through TWRP.
rebretz000 said:
you know what, i downloaded the img file from DHackers Android Hosting. Let me download the ZIP file and flash it through TWRP.
Click to expand...
Click to collapse
heh, well you got the image straight from the source, shouldn't have any problems with it. the ones in the zip files are unmodified except for being renamed to generic "recovery.img" (so i don't have to modify the updater-scripts for each one).
actually, just realized that twrp for the x still shows as 2.6.3.0, i was thinking of the new razr m twrp which does show 2.6.3.2. you can tell it's updated by the haptic feedback though.
Q9Nap said:
actually, just realized that twrp for the x still shows as 2.6.3.0, i was thinking of the new razr m twrp which does show 2.6.3.2. you can tell it's updated by the haptic feedback though.
Click to expand...
Click to collapse
Thank you. I figured it was updated because of the new vibration under settings.
Been driving myself nuts. I fastbooted it through fastboot, mfastboot, and mxfastboot.
Went back to hashcodes 2.6.3.1 then back.
Thank you for confirming.
Edit: DHacker just confirmed on twitter that he forgot to update a script so it will show 2.6.3 but all is well.
rebretz000 said:
Thank you. I figured it was updated because of the new vibration under settings.
Been driving myself nuts. I fastbooted it through fastboot, mfastboot, and mxfastboot.
Went back to hashcodes 2.6.3.1 then back.
Thank you for confirming.
Edit: DHacker just confirmed on twitter that he forgot to update a script so it will show 2.6.3 but all is well.
Click to expand...
Click to collapse
Ahh yes, just noticed the vibration. I suppose it worked after all! A little confusing but it seems to have worked after all
Sent from my XT1060 using Tapatalk
Q9Nap said:
here are the latest cwm/twrp recoveries made by dhacker29 in recovery flashable format:
http://batakang.com/ftp/?dir=devs/mhous33/xt1060
they can't be flashed with stock recovery, can be flashed only with existing cwm/twrp. if you're unlocked but running stock recovery, they can be flashed with safestrap.
all thanks to dhacker29!
Click to expand...
Click to collapse
Thanks for putting these packages together! Now we change recoveries on the fly:good:
So will the CWM work on a 4.4 VZW Dev Ed? If so, can I flash it with TWRP? I know theres a CWM on the forums, but someone said you should only use TWRP with 4.4.
SwiftLeeO said:
So will the CWM work on a 4.4 VZW Dev Ed? If so, can I flash it with TWRP? I know theres a CWM on the forums, but someone said you should only use TWRP with 4.4.
Click to expand...
Click to collapse
I'm pretty sure you can use this CWM. I think it was just updated this week by DHacker.
rebretz000 said:
I'm pretty sure you can use this CWM. I think it was just updated this week.
Click to expand...
Click to collapse
Ah okay. So would you know if I can flash it using TWRP? I mean it isn't an img file so I can't flash it through fastboot, so how would I flash it?
SwiftLeeO said:
Ah okay. So would you know if I can flash it using TWRP? I mean it isn't an img file so I can't flash it through fastboot, so how would I flash it?
Click to expand...
Click to collapse
These are flashable zips you flash in recovery.
Travisdroidx2 said:
These are flashable zips you flash in recovery.
Click to expand...
Click to collapse
Correct. But would you need CWM to flash CWM, or could you use TWRP to flash CWM and it would overwrite TWRP?
SwiftLeeO said:
Correct. But would you need CWM to flash CWM, or could you use TWRP to flash CWM and it would overwrite TWRP?
Click to expand...
Click to collapse
Won't matter. I used twrp to flash the new twrp. Or use twrp to flash cwm. Shouldn't matter.
SwiftLeeO said:
Ah okay. So would you know if I can flash it using TWRP? I mean it isn't an img file so I can't flash it through fastboot, so how would I flash it?
Click to expand...
Click to collapse
I've never flashed a recovery through a recovery. I've only ever used ADB. You can do two things.
1) Extract the zip file to remove the recovery img
2) If the OP doesn't mind me posting this you can go to DHacker's files and get the CWM recovery img he has there.
On the rezound I could take a .IMG recovery and rename it to PH98IMG.img, boot into bootloader, and it would auto flash the recovery... Does this method not work on the moto X?
Sent from my XT1060 using Tapatalk
porkrynd said:
On the rezound I could take a .IMG recovery and rename it to PH98IMG.img, boot into bootloader, and it would auto flash the recovery... Does this method not work on the moto X?
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I'm coming from a Rezound too, pretty sure the PH98IMG thing is specific to HTC devices
DOWNLOAD RECOVERY IMAGE
Here is the full guide on How to install
For which version? X720 or X727?
sam razzy said:
DOWNLOAD RECOVERY IMAGE
Here is the full guide on How to install
Click to expand...
Click to collapse
We need to know if its for the Us or Chinese variant.
PeaKay.18 said:
We need to know if its for the Us or Chinese variant.
Click to expand...
Click to collapse
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Veidas said:
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Click to expand...
Click to collapse
Sweet. So does this mean root is available?
PeaKay.18 said:
Sweet. So does this mean root is available?
Click to expand...
Click to collapse
If you flash official chinese rom, you can unlock and root phone same as chinese version.
Veidas said:
If you flash official chinese rom, you can unlock and root phone same as chinese version.
Click to expand...
Click to collapse
Thanks ????
Veidas said:
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Click to expand...
Click to collapse
Some one in other thread said that it may brick the us version if you flash the Chinese twrp and install ROM using it. Can the OP confirm it us universal before we have several bricked phones?
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Some one in other thread said that it may brick the us version if you flash the Chinese twrp and install ROM using it. Can the OP confirm it us universal before we have several bricked phones?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Veidas said:
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Click to expand...
Click to collapse
OK thank you.
Sent from my LEX727 using Tapatalk
Veidas said:
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Click to expand...
Click to collapse
Could you link this thread thanks
I have a few questions re TWRP:
1.
Are there different versions available for the X720? If yes, which ones (including download link)?
I believe that I have installed this one ( https://www.androidfilehost.com/?fid=529152257862668751 ) which seems to differ from this one: http://www.needrom.com/download/twrp-leeco-le-pro-3/
2.
How are the partitions organized on the Le Pro 3? See also http://forum.xda-developers.com/le-pro3/development/ref-lex720-64gb-partition-infos-t3493528
What is the difference between system and systemimage (as shown in TWRP)?
3.
Does the Le Pro 3 TWRP port still have any bugs?
For instance, it says that system is not mounted and, therefore, I cannot easily restore system partition. I tried to mount it but thereafter the phone did not boot.
Is it normal that system apps get restored if I only restore the data partion?
Thanks.
-Tiz- said:
For instance, it says that system is not mounted and, therefore, I cannot easily restore system partition. I tried to mount it but thereafter the phone did not boot.
Click to expand...
Click to collapse
Sometimes I have the same problem, /system couldn't be mounted.
I solved it like this:
In TWRP go to Wipe -> Advanced Wipe -> Check System Partition -> Repair or Change File System -> Change File System -> EXT4.
Has anyone installed this successfully on 727 US version?
-Tiz- said:
I have a few questions re TWRP:
1.
Are there different versions available for the X720? If yes, which ones (including download link)?
I believe that I have installed this one ( https://www.androidfilehost.com/?fid=529152257862668751 ) which seems to differ from this one: http://www.needrom.com/download/twrp-leeco-le-pro-3/
Click to expand...
Click to collapse
On my x720 I use another one, the latest V4 from chinese sites :
https://mega.nz/#!EVcUCY4J!nN9r170x1eL9uvZg2p4h-q_M9T3I3HxcdSRigl2DNj4
I have now installed TWRP v4 but still have problems to restore a backup.
First, I backed up everything. I tried to restore boot, system, systemimage and data. I did not restore efs, recovery and firmware. Do I have to restore firmware? What is that? What is the difference between system and system image? In any case, I got a lot of errors and the phone is very slow after I restored boot, system, systemimage and data.
Thanks!
The TWRP versions I tried (including v4) have problems and do not reliably mount my encrypted data partition. (I had a similar problem with the initial TWRP ports for the Elephone P8000. The problems were fixed and subsequent ports worked without problems.)
Moreover, if I boot into TWRP recovery the screen is flickering from time to time (probably just a cosmetic issue).
Is there an updated TWRP version 5 or something? Could you please link to the Chinese website where the TWRP port for the LePro3 is made available? Thanks!
I am trying to unlock the bootloader right now using the fastboot oem unlock-go command and it is not working on the US variety. I have also enabled the oem unlocking in dev options, as well as, debugging. Has the US variant changed things to prevent the bootloader from being unlocked?
-Tiz- said:
....
Is there an updated TWRP version 5 or something? Could you please link to the Chinese website where the TWRP port for the LePro3 is made available? Thanks!
Click to expand...
Click to collapse
Here is the orginal TWRP chinese thread, the last version is 2016.11.06 V4 at the moment :
http://bbs.ydss.cn/thread-687153-1-1.html
Yes flickering is a known problem.
losteagle said:
Here is the orginal TWRP chinese thread, the last version is 2016.11.06 V4 at the moment :
http://bbs.ydss.cn/thread-687153-1-1.html
Yes flickering is a known problem.
Click to expand...
Click to collapse
I can't install TWRP, it says it is finished but when entering recovery, still standard EUI recovery is there.
Tried the V4, but can't read what to do. Please help.
Running 18S original.
Edit: Finally worked! Press TWRP.bat from homescreen, enter a few times and all clear!
Hi Guys,
I've got a SGP511 WiFi only (castor_windy), with root access and an unlocked bootloader. but to install AOSP 7.1 I need to update my version of TWRP to 3.0.0.
I installed TWRP via TabZ2-lockeddualrecovery2.8.26 batch file and can access recovery but every time i select install look at my SD card and change to images and select the castor_winsy 3.0.0 image i dont get an option to install to recovery i only get kernel how do i resolve this ?
I have re flashed FW (KitKat) via flashtool loads of times
rooted
installed TabZ2-lockeddualrecovery2.8.26 batch file
and every time i get the same option.... cant flash to recovery or boot only kernel
i have attached a screenshot so that nobody thinks i am going mad
can you please help me thanks :fingers-crossed:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
T4ke5 said:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
Click to expand...
Click to collapse
Hi ... Is that using the ADB fastboot recovery TWRP.img?
I am on KitKat just wondering if that's why it won't work have you got to be on 6.01 ?
Well, actually it shouldn't matter on which Android version you are, but to have the latest boot.img and radio.img installed I'd flash the latest stock ROM available here on XDA which means by the way having TWRP 3.0.2.0 as well and after that you might be ready for AOSP 7.1
Just have look at kulvertti's thread in the "General" subforum. Since you have already intalled a custom recovery there shouldn't be any problems.
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
rcstar6696 said:
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
Click to expand...
Click to collapse
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
nickbaker66 said:
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
Hi @rcstar6696,
i had no problem flashing the boot.img that part was ok but when i went to flash the recovery it never seemed to work for me, in the terminal window in the SDK programme tools folder which is the same folder as the image i downloaded from your thread is in (Twrp-3.0.0-0-castor-windy.img and twrp_castor_windy.img) it said something about sizes but said it went ok tried to boot into recovery and it never worked
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
i am currently on Kitkat does this matter
thansk
nickbaker66 said:
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
thansk
Click to expand...
Click to collapse
The right command is
fastboot flash recovery PathToRecovery*
Click to expand...
Click to collapse
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers guys I'll give that a go
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
hi guys i tried what you said and still could get it to work, please see screenshot and check if i have entered something wrong, i dont thinki have but i might be wrong
is it because i have not done the boot image first via fastboot ?
Looks quite good. Did you already try to enter the recovery?
T4ke5 said:
Looks quite good. Did you already try to enter the recovery?
Click to expand...
Click to collapse
i tried to access recovery via the down volume button when the tablet starts up but no green light appears and it just starts normally ...... i ve not flashed the boot.img first then flashed recovery as ive seen it can be done via recovery the only option left now is to try flashing the boot.img first .... i have no option but to try that tonight and see if that can do it that way
@T4ke5 @rcstar6696 thanks very much guys for your help TWRP on 3.0.0 now and AOSP 7.1 installed now
Sweet! :good:
T4ke5 said:
Sweet! :good:
Click to expand...
Click to collapse
Don't laugh but I can't put my WiFi code in because there's no keyboard just tap to speak how can I have the keyboard back lol
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers mate worked a treat
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
BraskOviedo said:
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Does this also have pstore enabled?
infrag said:
Does this also have pstore enabled?
Click to expand...
Click to collapse
It is the latest official release, if it was on previous versions it should have it also.
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
rshahzad17 said:
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
Click to expand...
Click to collapse
How did you flash it?
through TWRP? or fastboot?
xuser_ said:
How did you flash it?
through TWRP? or fastboot?
Click to expand...
Click to collapse
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
rshahzad17 said:
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
Click to expand...
Click to collapse
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
xuser_ said:
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Thanks, I will try this !
I was using TWRP 3.0.2.1-x2 and I tried flashing a new ROM; After flash I'm stuck, it will boot only to recovery!
I tried flashing TWRP 3.1.0.0-x2 - same thing, can't get out of the loop - any ideas please?
Thank you!
the latest 3.1.1 is not work
通过我的 Le X821 上的 Tapatalk发言
Hi Mate
unfortunately the latest twrp doesn't work, you will need to revert to "twrp-3.1.1-0-x2"
it is working fine, you can do so on windows once all drivers installed correctly or use any Linux operating system
if you need help let me know and will write a detailed instruction how to do it on Linux as it is a lot easier than junk windows
good luck
sam
Hello everyone! I'm new on XDA and this is my first thread.
So, I've been messing around with my Honor 7 lately. I've flashed a custom recovery (TWRP), flashed a custom ROM (Unofficial CM13 for Honor 7: https://forum.xda-developers.com/honor-7/development/unsupported-cyanogenmod-13-honor-7-plk-t3542627) and root (SuperSU) and I've started to regret all of my decisions so I would like to take a fresh start (AKA flashing the STOCK ROM/Firmware)
Now, before anyone starts redirecting me to other (similar) threads, I've tried a lot. I tried to flash the stock recovery (a lot of different versions) but still when I try to boot into the stock recovery, my phone just reboots. I tried to do the force update thing (holding both power + & - buttons: http://www.gogorapid.com/flash-stock-rom-huawei-honor-7/), but this combination just boots my phone into TWRP. Could it be that I'm doing something wrong or that I'm missing something, like some requirements that are not being met? Please help me, I would appreciate it a lot! Thanks in advance.
LoRikU said:
Hello everyone! I'm new on XDA and this is my first thread.
So, I've been messing around with my Honor 7 lately. I've flashed a custom recovery (TWRP), flashed a custom ROM (Unofficial CM13 for Honor 7: https://forum.xda-developers.com/ho...upported-cyanogenmod-13-honor-7-plk-t3542627) and root (SuperSU) and I've started to regret all of my decisions so I would like to take a fresh start (AKA flashing the STOCK ROM/Firmware)
Now, before anyone starts redirecting me to other (similar) threads, I've tried a lot. I tried to flash the stock recovery (a lot of different versions) but still when I try to boot into the stock recovery, my phone just reboots. I tried to do the force update thing (holding both power + & - buttons: http://www.gogorapid.com/flash-stock-rom-huawei-honor-7/), but this combination just boots my phone into TWRP. Could it be that I'm doing something wrong or that I'm missing something, like some requirements that are not being met? Please help me, I would appreciate it a lot! Thanks in advance.
Click to expand...
Click to collapse
It seems that you didn't flash the stock recovery properly.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
It seems that you didn't flash the stock recovery properly.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply!
Could it be? I booted my phone into bootloader (unlocked) and flashed stock recovery with adb using the command "fastboot flash recovery recovery.img". I tried a variety of versions (from B100 up to B330 I think), but none of them seemed to work. What am I doing wrong?
LoRikU said:
Thanks for the reply!
Could it be? I booted my phone into bootloader (unlocked) and flashed stock recovery with adb using the command "fastboot flash recovery recovery.img". I tried a variety of versions (from B100 up to B330 I think), but none of them seemed to work. What am I doing wrong?
Click to expand...
Click to collapse
did you tried the offical TWRP of ypur device?
venugopalu007 said:
did you tried the offical TWRP of ypur device?
Click to expand...
Click to collapse
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
LoRikU said:
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
Click to expand...
Click to collapse
Download stock recovery and boot your phone to fastboot and
in command --- Fastboot flash recovery xxxfilenamexxx.img
LoRikU said:
Hey,
Sorry for the slow reply, I'm currently on vacation. Euh I already have TWRP installed right now, I just don't know how to install the stock recovery.
Click to expand...
Click to collapse
Grab the stock recovery file for your device. You can flash inside TWRP itself.
adriansticoid said:
Grab the stock recovery file for your device. You can flash inside TWRP itself.
Click to expand...
Click to collapse
Koriki extract the firmware using huaweiupdateextractor
venugopalu007 said:
Koriki extract the firmware using huaweiupdateextractor
Click to expand...
Click to collapse
Koriki?
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Koriki?
Click to expand...
Click to collapse
Loriki is user name of op
Sorry my keyboard auto corrected it to koriki
venugopalu007 said:
Download stock recovery and boot your phone to fastboot and
in command --- Fastboot flash recovery xxxfilenamexxx.img
Click to expand...
Click to collapse
I tried that, read my second post on this thread. It didn't work, I didn't know which version I had to use. I ended up with a bootloop on various versions as mentioned in one of my first posts.
adriansticoid said:
Grab the stock recovery file for your device. You can flash inside TWRP itself.
Click to expand...
Click to collapse
Alright, I will try this. As soon as I get back home since the wifi here sucks.
venugopalu007 said:
Koriki extract the firmware using huaweiupdateextractor
Click to expand...
Click to collapse
I planned on doing this though I don't know where I can get the firmware for my H7... Could you perhaps provide me a link? It would be very kind of you (+ The wifi here sucks, so I will try downloading firmwares when I get home)