[RECOVERY][OFFICIAL]TWRP 3.1.0-0 [LeEco Le Max 2] - LeEco Le Max 2 ROMs, Kernels, Recoveries, & Other

Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html

BraskOviedo said:
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Does this also have pstore enabled?

infrag said:
Does this also have pstore enabled?
Click to expand...
Click to collapse
It is the latest official release, if it was on previous versions it should have it also.

For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.

rshahzad17 said:
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
Click to expand...
Click to collapse
How did you flash it?
through TWRP? or fastboot?

xuser_ said:
How did you flash it?
through TWRP? or fastboot?
Click to expand...
Click to collapse
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.

rshahzad17 said:
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
Click to expand...
Click to collapse
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html

xuser_ said:
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Thanks, I will try this !

I was using TWRP 3.0.2.1-x2 and I tried flashing a new ROM; After flash I'm stuck, it will boot only to recovery!
I tried flashing TWRP 3.1.0.0-x2 - same thing, can't get out of the loop - any ideas please?
Thank you!

the latest 3.1.1 is not work
通过我的 Le X821 上的 Tapatalk发言

Hi Mate
unfortunately the latest twrp doesn't work, you will need to revert to "twrp-3.1.1-0-x2"
it is working fine, you can do so on windows once all drivers installed correctly or use any Linux operating system
if you need help let me know and will write a detailed instruction how to do it on Linux as it is a lot easier than junk windows
good luck
sam

Related

OnePlus 2 Stock Recovery

Hello
After searching the internet for good 30-40 minutes I found the Stock OnePlus 2 recovery image. I am returning my unit so needed it to be fully stock.
Download: https://www.dropbox.com/s/8np35kw71i222as/OPT Stock Recovery.7z?dl=0
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Been searching for this for past hour!!!!!!
Hi,
Thank you very much.
I'm also returning my phone to oneplus and i had unlocked and rooted the phone like you.
May i know how you restore the stock ROM and recovery?
thank you
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
granfot said:
Why do you need stock recovery for that? I just wiped everything on mine and when I rebooted from twrp I chose not to protect twrp. Rma was approved so I guess they were satisfied with that.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
werthechamp said:
What do you means by "wipe everything"? include internal storage?
And i heard that official twrp dont have the option of "not to protect twrp".
Click to expand...
Click to collapse
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
granfot said:
Yes, including internal storage.
That I didn't know, but you don't void warranty by installing custom recovery or rooting so it shouldn't be an issue either way.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Is this the recovery of the international version or chinese?
thx
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
CafeKampuchia said:
1. Download the latest signed flashable zip from here.
2. Press thanks for Spannaa.
3. Extract recovery.img from the zip file with 7zip.
4. Flash it from fastboot using the "flash recovery recovery.img" command.
Click to expand...
Click to collapse
Problem: The signed flashable zips don't contain recovery.img
Spannaa said:
Problem: The signed flashable zips don't contain recovery.img
Click to expand...
Click to collapse
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
CafeKampuchia said:
Hmmmm... that would be a problem. :/ Thanks for pointing that out.
Click to expand...
Click to collapse
I Installed the 2.0 manually...then update ota...now I have stock recovery.
zat0x said:
This is not the international version but chinese . Im looking for the english version, searched everywhere but unable to find it. wtf
Click to expand...
Click to collapse
Hey, I don't know if you ever found the stock recovery but another member had posted fastboot images in the OnePlus2 Android Development section.
I haven't tested out the recovery myself, but you can check to see if it's the English one.
All Fastboot images: https://www.androidfilehost.com/?w=files&flid=40701
Stock Recovery Image: https://www.androidfilehost.com/?fid=24052804347834210
Hope this helps.
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
Good question! Want to know that too...
keshavmot2 said:
Using these, how would I return my OP2 to completely stock recovery and kernel?
Thanks
Click to expand...
Click to collapse
1:
Flash the full stock rom from OxygenOS 2.1.1: http://forum.xda-developers.com/showthread.php?t=3209863
2: Flash the OxygenOS 2.1.2 zip from the same post
3: flash the stock recovery from tgis thread
Hope I helped you
Download OP2 Stock Recovery from Official Site: https://s3.amazonaws.com/oxygenos.oneplus.net/OP2_recovery.img
It seems OnePlus uses AWS to host all of their OTA's.
E.G. https://s3.amazonaws.com/oxygenos.oneplus.net/OnePlus2Oxygen_14_OTA_012_all_1602261837.zip ( This is for OxygenOS 2.2.1 releases in 2012 26th Feb - 970MB )
Recent ROM Downloads of OP2: http://downloads.oneplus.net/devices/oneplus-2/ ( Includes Marshmallow Beta OxygenOS 3.0 , however, seems the ROM has Battery issue, major )
matrixdefalco said:
I Installed the 2.0 manually...then update ota...now I have stock recovery.
Click to expand...
Click to collapse
I did the same thing and it worked for me If somebody is still facing this issue
anyone knows how the flash the stock recovery from mac???
krishp said:
anyone knows how the flash the stock recovery from mac???
Click to expand...
Click to collapse
One "?" is enough dude..
You have to install adb for Mac (http://stackoverflow.com/questions/31374085/installing-adb-on-mac-os-x), enable USB Debugging on your phone, reboot into bootloader mode :
Code:
adb reboot-bootloader
then go into:
Code:
su
and then
Code:
fastboot devices
fastboot flash <recovery_name>.img

[RECOVERY] Hybrid Recovery v3 (Supports All MM Roms: OOS H2OS CM AOSPA)

Here you go with Hybrid Recovery v3.x , which supports all available ROMs/ OSs for our beloved OnePlus2.
#One Recovery for All
1. Oxygen OS
2. Hydrogen OS
3. CM 13
4. Paranoid ROM
5. Ressurection Remix
6. Vanilla Unicorn
7. Dirty Unicorn
Download: Hybrid Recovery v3.2
Download: Hybrid Recovery v3.3
Download: Hybrid Recovery v3.4
Changelog : Hybrid Recovery v3.4
Code:
1. Added Option to Rename a backup package.
2. Added missing Timezone tab.
3. Combined modemst1 & modemst2 as "EFS" partition.
4. UI Enhancements.
Changelog : Hybrid Recovery v3.3
Code:
1. Install Section Optimized
2. Added New Partitions
a.Modemst1
b.Modemst2
c.OEM
d.Misc
e.Persist
f.Firmware
3. Fixed missing Strings & Optimized UI
Changelog : Hybrid Recovery v3.2
Code:
1. Hybrid UI, Simple and Beautiful.
2. Optimized Animation and Speed
3. Added SysLog and SysInfo in Advance Section.
4. Added Missing EFS and Recovery Partitions
5. OTG Support
6. Added ViewLog Option in Install Section
7. OnePlus Logo is now the back button (on demand)
Thanks! Been waiting for this. Downloading now.
Update:
My phone is encrypted and on OOS 3.0. Was able to use fastboot method to flash the new recovery. Unfortunately still can't get TWRP to decrypt the phone. Anyone have luck?
Update 2:
Tried TWRP 3.0.2 Hybrid v2 and decrypt still not working. Thanks for the attempted fix WhyOrean!
Just a FYI, flashing your recovery form TWRP prevented me from getting back into recovery. Had to load the previous twrp (3.0.2) via fastboot.
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
+1
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
https://twrp.me/devices/oneplustwo.html
The easiest way is to flash it within TWRP if you have TWRP 2.8.4 or higher already installed. Otherwise use Fastboot Install Method. Check the link above.
madferretx said:
https://twrp.me/devices/oneplustwo.html
The easiest way is to flash it within TWRP if you have TWRP 2.8.4 or higher already installed. Otherwise use Fastboot Install Method. Check the link above.
Click to expand...
Click to collapse
Yes but if do i flash via twrp..?
isoladisegnata said:
Yes but if do i flash via twrp..?
Click to expand...
Click to collapse
If you have TWRP already just select install images, flash this file and reboot.
this hybrid firmware not work for me while using CM13.
I flashed the official TWRP 3.0.2.0 via fastboot then its okay now.
Some users have reported many problems flashing this TWRP, so, please add the steps depending your current TWRP.
Can we flash it directly if we are using the modified H20 and OOS3 TWRP?Is it necessary to flash "Revert2Lollipop" before flashing this?
Thank you
I'm on OS3.0 and flash this recovery img file directly from my previous TWRP, and it worked as expected.
From OOS3.0 beta and TWRP 3.0.1-0 modified I've flash'd this hybrid recovery and no problem at all.
It works fine.
Thanks for the job.
WhyOrean said:
Download required Firmware Zip and Run Update script.
Click to expand...
Click to collapse
@WhyOrean - It might be worth including the backup partitions in the Update.bat too so users running Oxygen OS can flash OTA updates (these are checked before being patched).
Code:
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot flash pmicbak pmic.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash tzbak tz.mbn
Finally thanks for this
Verstuurd van mijn ONE A2003 met xda Forums PRO
So..if i am on h2os or oos3 and want to flash a cm13 ROM i flash old modem so oos2/cm13/ first...if i am on cm13 and i want to flash oos3 or h2os mm i have to flash new modem firmware ..right?
isoladisegnata said:
So..if i am on h2os or oos3 and want to flash a cm13 ROM i flash old modem so oos2/cm13/ first...if i am on cm13 and i want to flash oos3 or h2os mm i have to flash new modem firmware ..right?
Click to expand...
Click to collapse
Yep, but fastboot flash rather than recovery flash.
If you're on OOS3 or H2MM and want to move to CM13, fastboot flash the contents of the Oxy2_CM13_Firmware.zip first.
If you're on CM13 and want to move to OOS3 or H2MM, fastboot flash the contents of the OOS3_H2MM_Firmware.zip first.
Spannaa said:
@WhyOrean - It might be worth including the backup partitions in the Update.bat too so users running Oxygen OS can flash OTA updates (these are checked before being patched).
Click to expand...
Click to collapse
Sure I will add up that too, soon.
madferretx said:
Thanks! Been waiting for this. Downloading now.
Update:
My phone is encrypted and on OOS 3.0. Was able to use fastboot method to flash the new recovery. Unfortunately still can't get TWRP to decrypt the phone. Anyone have luck?
Click to expand...
Click to collapse
Sad to here that it didnt help, but remember patching encrypt fix from TWRP 3.0.2.
Yeah I never checked it on Encrypyed OP2, I dont Encrypt my phone nor I can encrypt it now to check.
Anyhow thanks for reporting, I will unto that in next build soon.
lockmunk said:
this hybrid firmware not work for me while using CM13.
I flashed the official TWRP 3.0.2.0 via fastboot then its okay now.
Click to expand...
Click to collapse
Thanks for reporting, I will look unto it.
But its working fine with my OPT Mokee OS(CM13 based)
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
1) Install it via your Current TWRP
Got to Install Section
Select Flash Image
Select TWRP Hybrid n Flash
2) Install via fastboot
Put your phone in fastboot
And flash via following command:
fastboot flash recovery twrp.img
fastboot boot twrp.img

pollux/LTE + TWRP: will not boot system. Why?

SGP-321 / LTE / pollux
Bootloader unlocked
CM13 installation:
- extracted boot.img and installed by: fastboot flash boot boot.img
- installed CM13 bei "update" from inside CM_recovery
- everything works OK until now.
TWRP 3.0.2.0 instal:
- installed by ADB "fastboot flash boot TWRP.img": sending/writing 'boot': OKAY
- fastboot reboot: rebooting into TWRP
In TWRP/Reboot SYSTEM: this reboots back into TWRP, does NOT boot CM13. Why?
CM13 installed again by "install" in TWRP: this installs CM13 but overwrites TWRP with the CM13_boot.img. So after the installation TWRP is gone and i have only the CM recovery.
Installing TWRP again has the same result as above: no booting of CM13, only booting into TWRP.
How can i solve this?
(PS: on my another xperia, "pollux_windy"/WiFi everything works ok, no issues with TWRP/CM13. )
nicky-xda said:
SGP-321 / LTE / pollux
Bootloader unlocked
CM13 installation:
- extracted boot.img and installed by: fastboot flash boot boot.img
- installed CM13 bei "update" from inside CM_recovery
- everything works OK until now.
TWRP 3.0.2.0 instal:
- installed by ADB "fastboot flash boot TWRP.img": sending/writing 'boot': OKAY
- fastboot reboot: rebooting into TWRP
In TWRP/Reboot SYSTEM: this reboots back into TWRP, does NOT boot CM13. Why?
CM13 installed again by "install" in TWRP: this installs CM13 but overwrites TWRP with the CM13_boot.img. So after the installation TWRP is gone and i have only the CM recovery.
Installing TWRP again has the same result as above: no booting of CM13, only booting into TWRP.
How can i solve this?
(PS: on my another xperia, "pollux_windy"/WiFi everything works ok, no issues with TWRP/CM13. )
Click to expand...
Click to collapse
Use CM13 kernel (boot.img) with TWRP integrated or if you don't have it, flash TWRP to FOTA:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Click to expand...
Click to collapse
Thanks a lot for the hint!
CM13 kernel (boot.img) with TWRP integrated: unfortunately i have not seen that anywhere mentionded until now. Where could i get that?
I have TWRP 3.0.2.0 for my "pollux_windy" that works fine, from the following download:
https://dl.twrp.me/pollux_windy/
I have been trying TWRP 3.0.2.0 for my "pollux" from the same site:
https://dl.twrp.me/pollux/
Is the TWRP for pollux_windy with integrated boot.img and the one for "pollux" without boot.img?
nicky-xda said:
unfortunately i have not seen that anywhere mentioned until now. Where could i get that?
Click to expand...
Click to collapse
here.
I actually don't know why it worked for you with windy, as when you flash fastboot flash boot TWRP.img it replaces stock CM boot.img and it won't boot, cause inside twrp.img is only recovery, but not kernel to boot system.
Thanks a lot for this excellent hint! It was a big help and it seems to work now perfectly.
pollux_windy / WiFi & TWRP:
After second thought i have to admit that i do not quite remember how exactly i installed TWRP on this one, it was some 2 months ago and i cannot remember any more:
- after unlocking the bootloader i extracted the "boot.img" from CM13 and installed it by "fastboot flash boot boot.img"
- then i installed CM13 by the option "update" in CM_recovery
- after that i maybe tried to install TWRP (from the link above) by the ADB command: fastboot flash recovery twrp.img. Would that have worked?
- or i did it by the app "TWRP manager" which i have also installed
In any case until your answer in this topic i have not heard about the "boot" part having to be integrated into TWRP for it to work on the xperia.
Anyway: it works on my pollux_windy ok.
BTW: if it should some time in the future be necessary to install TWRP again on my "windy" would you have a link for a TWRP+boot.img for the "windy" as well?
nicky-xda said:
Would that have worked?
- or i did it by the app "TWRP manager" which i have also installed
Click to expand...
Click to collapse
"fastboot flash recovery" command will not work, because sony devices (at least besides the very latest ones) don't have separate recovery partition, as nexus and other manufacturers have. That's why recovery should be integrated with kernel in boot.img
TWRP manager could have possibly installed it for you properly, but to FOTA partition which is used to install OTA updates on stock Sony firmware.
On unlocked bootloader it is not in use and could store TWRP recovery permanently (as normal recovery partition).
nicky-xda said:
BTW: if it should some time in the future be necessary to install TWRP again on my "windy" would you have a link for a TWRP+boot.img for the "windy" as well?
Click to expand...
Click to collapse
Sure. PM me, when you need it.
Did you follow my tutorial stricly ?
http://forum.xda-developers.com/xpe...de-tutorial-sony-xperia-tablet-z-lte-t3392831
djibe89 said:
Did you follow my tutorial stricly ?
http://forum.xda-developers.com/xpe...de-tutorial-sony-xperia-tablet-z-lte-t3392831
Click to expand...
Click to collapse
Yes, i did. But in your tutorial i do not mention anything about the sort of recovery it needs to wor properly: recovery inkluding the kernel. Did you read the hints by Rootk1t above in this topic?
Sony doesn't have a Recovery partition.
Hence you need a FOTAkernel compatible recovery (latest TWRP 3.x are) (hack that takes the Sony partition reserved for over the air updates, and turns it into a persistent recovery partition).
This guide : http://forum.xda-developers.com/xperia-s/general/twrp-recovery-to-fota-partition-guide-t3258821 looks good but read carefully.
Why don't you try to step back to my guide. Back to the recovery flash.
Fastboot flash temporary TWRP, enter TWRP, format partitions to F2FS, wipe data and then flash RESURECTION REMIX 5.7.4 + Black kernel for pollux + Gapps ?
I will update my tutorial this weekend to explain better.
Keep in touch
@Djibe: just take a look in this topic above, posting #4. This is a file including TWRP + kernel. Only this one i was able to successfully instal by the command:
fastboot flash boot twrp.img
The TWRP that you link in your guide does not work because it does not include the kernel.
You should have pointed it out better to be understandable better by beginners like me
Otherwise: thanks a lot for your help and support anyway
nicky-xda said:
@Djibe: just take a look in this topic above, posting #4. This is a file including TWRP + kernel. Only this one i was able to successfully instal by the command:
fastboot flash boot twrp.img
The TWRP that you link in your guide does not work because it does not include the kernel.
You should have pointed it out better to be understandable better by beginners like me
Otherwise: thanks a lot for your help and support anyway
Click to expand...
Click to collapse
Sorry sorry, i replied in a rush.
Enjoy TabZ
@Rootk1t: What about updating to the newest ver. TWRP 3.1.x?

One Plus X soft (?) bricked

Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.

TWRP problem... Help

Hello, I have a tablet Xperia Z2 andriod 6.0.1, the original sony rom. I can't upload TWRP, everything loads fine with fastboot and TWRP won't boot because I'd like to install LineageOS. Bootloader unlocked correctly.
Sorry for my bad english and please help
From what I found out, it is possible to upload a custom rom via NUT'S Dual Recovery. Only the download page of this program and the links are inactive. If anyone has it, please link to the NUT'S Dual Recovery program
As you know fastboot, try this and see if you have luck.
Extract your custom rom zip and reveal your .img files.
Put the .img files into the same folder with fastboot.exe
fastboot erase cache
fastboot erase data
fastboot flash system system.img
fastboot flash boot boot.img
If you have luck, it will boot into system. Backup, always, beforehand as it will delete all your data.
Thank you very much, thanks to this I somehow managed to launch TWRP. I have installed LineageOs 18.1, the system works.
Silny033 said:
Thank you very much, thanks to this I somehow managed to launch TWRP. I have installed LineageOs 18.1, the system works.
Click to expand...
Click to collapse
Could you please describe your steps? I followed the instructions in lineage's wiki, tried flashing the latest castor compatible lineage recovery, tried different TWRP versions... It's always the same: fastboot prints "OKAY" but I can't boot into recovery.
My device is unlocked, but not rooted.
Testing Tester said:
Could you please describe your steps? I followed the instructions in lineage's wiki, tried flashing the latest castor compatible lineage recovery, tried different TWRP versions... It's always the same: fastboot prints "OKAY" but I can't boot into recovery.
My device is unlocked, but not rooted.
Click to expand...
Click to collapse
Hello, did you try fastboot boot twrp twrp.img, and flash TWRP in TWRP as soon as you get into it?
Testing Tester said:
Could you please describe your steps? I followed the instructions in lineage's wiki, tried flashing the latest castor compatible lineage recovery, tried different TWRP versions... It's always the same: fastboot prints "OKAY" but I can't boot into recovery.
My device is unlocked, but not rooted.
Click to expand...
Click to collapse
I'm in the same situation except I only tried with Lineage recovery for now. What did you end up doing? Many thanks.
LR7875 said:
Hello, did you try fastboot boot twrp twrp.img, and flash TWRP in TWRP as soon as you get into it?
Click to expand...
Click to collapse
Shall I try this? At this stage I haven't even tried TWRP. I only tried LineageOS Recovery but same situation as @Testing Tester : impossible to boot into it. What TWRP version do you recommand? @Silny033 which version worked for you?
Bonpotiron said:
Shall I try this? At this stage I haven't even tried TWRP. I only tried LineageOS Recovery but same situation as @Testing Tester : impossible to boot into it. What TWRP version do you recommand? @Silny033 which version worked for you?
Click to expand...
Click to collapse
I did everything as LR7875 advised, boot twrp first and then LineageOS 18.1 and it works fine. I have twrp 3.2.1-1
Silny033 said:
I did everything as LR7875 advised, boot twrp first and then LineageOS 18.1 and it works fine. I have twrp 3.2.1-1
Click to expand...
Click to collapse
LineageOS 18.1 really? I'm confused because the instructions on Lineage website say that the last nightly built is LineageOS 17.1 – [ Android 10.0.0 (Android 10) ] of 2021-10-06
LR7875 said:
As you know fastboot, try this and see if you have luck.
Extract your custom rom zip and reveal your .img files.
Put the .img files into the same folder with fastboot.exe
fastboot erase cache
fastboot erase data
fastboot flash system system.img
fastboot flash boot boot.img
If you have luck, it will boot into system. Backup, always, beforehand as it will delete all your data.
Click to expand...
Click to collapse
What do you call 'system' please? is it the custom rom or the recovery?
Is this procedure similar to yours? the user also has the SGP511 device. https://forum.xda-developers.com/t/...for-castor-castor_windy.4210181/post-84710741
Bonpotiron said:
What do you call 'system' please? is it the custom rom or the recovery?
Click to expand...
Click to collapse
1. Unzip the lineageos zip
2. Find system.img (special case it is system.new.dat.br, tell me if it is)
3. Execute the aforementioned command
LR7875 said:
1. Unzip the lineageos zip
2. Find system.img (special case it is system.new.dat.br, tell me if it is)
3. Execute the aforementioned command
Click to expand...
Click to collapse
it is system.new.dat.br
Bonpotiron said:
LineageOS 18.1 really? I'm confused because the instructions on Lineage website say that the last nightly built is LineageOS 17.1 – [ Android 10.0.0 (Android 10) ] of 2021-10-06
Click to expand...
Click to collapse
This is the latest unofficial version from this topic: https://forum.xda-developers.com/t/rom-unofficial-lineageos-18-1-for-castor-castor_windy.4261491/
It is stable on this
Bonpotiron said:
it is system.new.dat.br
Click to expand...
Click to collapse
Ok and what happens if you 'fastboot boot twrp.img'?
Try this
If it gets into twrp immediately wipe and flash lineageos
@LR7875 the device enters recovery in a hidden way, as the display stays black.
I managed to install Lineage 17.0 with these instructions: https://forum.xda-developers.com/t/...for-castor-castor_windy.4261491/post-85738643
Boy, that was tricky !
Seems like the graphics driver of the recovery is broken.

Categories

Resources