Team Win Recovery Project v2.6.3.0
* Warning : You will lose your mobile warranty.
* I am not responsible if you brick your devices, or your SD cards is dead, or you getting fired because the alarm app failed.
* Please research about features included in this Kernel before flashing it! You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
For Help: https://www.facebook.com/groups/GTS7262/
Changelog: Beta v1
1) Initial release of Team Win Recovery Project v2.6.3.0
2) Based on CWM Recovery v6.0.3.7
3) Has all features and fixes of above linked CWM recovery.
Installation: Follow flashing/installing TWRP/CWM instructions from this link: https://bit.ly/2NllOo9
Note: If your phone still doesn’t boot into TWRP mode then you will need to:
Download ADB platform tools and extract the contents to your C:/ drive.
Power on your mobile, go to Settings -> Developer Options -> Enable Developer Options -> Check USB debugging -> Home.
Now connect your device to PC with a USB Cable, press Windows + R button to open Run prompt. Type cmd and hit enter.
Type cd/ and hit enter. Type cd platform-tools and hit enter. Type adb devices and hit enter. If you found some random number as attached device then your mobile is connected in USB debugging mode else make sure you followed correct steps or install Samsung driver and repeat the steps.
Now type adb reboot recovery and hit enter. Your phone will now reboot into TWRP Recovery. Remove the USB Cable.
Download(s):
NEW Team Win Recovery Project v2.6.3.0: https://www.up-4ever.org/rrwkisby41f0
XDA:DevDB Information
Team Win Recovery Project v2.6.3.0, Tool/Utility for the Samsung Galaxy Star
Contributors
ItsAnilSingh
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2015-05-22
Created 2015-05-22
Last Updated 2020-01-07
Working features:
** All features working the way they are supposed to.
This is a beta version, I request you to first flash the linked CWM recovery first, take a whole rom backup before trying out this recovery. Will update the working and non-working features as I/some-other tests it.
Awesome !
I can guarantee, This recovery works flawlessly !
Thanx to dev ^_^
Enjoy !
Hats off bro @anilsingh .
late trying it but it works good.
knox
how knox removal work
B1ACkH3AR7 said:
I can guarantee, This recovery works flawlessly !
Thanx to dev ^_^
Enjoy !
Click to expand...
Click to collapse
vikrajsingh said:
Hats off bro @anilsingh .
Click to expand...
Click to collapse
[email protected] said:
late trying it but it works good.
Click to expand...
Click to collapse
Thanks all.
honey0029 said:
how knox removal work
Click to expand...
Click to collapse
Didn't get you?
thank you Bro :good:
Not work
Nothing works man nothing works:crying::crying::crying::crying::crying::crying::crying: but i finded another that works great no problem if anyone want it contact me because i cant send link to this post
im a new in this forum
tnx
any twrp for gts5282
i can't find any
kirtimaan01 said:
any twrp for gts5282
i can't find any
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...overy-teamwin-recovery-project-3-0-0-t3314308
great one thanks are you have rom link cm based
great job
@ItsAnilSingh
I followed the steps and flashed TWRP(your link is not working so I googled it) with Odin, two times but every time I try to get to recovery it gets to stock recovery, tried with two methods - hard buttons and with adb reboot recovery command, but only stock recovery shows up.
Can anybody please help?
I have the same problem with 5.0.1 - I9505XXUHPK2_I9505YXZHPL1_I9505XXUHPK2_HOME.tar.md5 and twrp-3.2.0-0-jfltexx.img.tar (S4 I9505). Can not get to recovery (freez) and after I just run android I an anter there again, but it is standard android recovery and can not put SuperSu :/
Ok. I needed to use one version older (also with older odin, but i think not odin but version 3.2.0 was a problem)
Yeahh that is not working....it stil reboot in to stock recovery
Related
CyanogenMod 12 for the Asus PadFone S/X
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Thanks to @balika011 for his tool for unlock bootloader.
Thanks to baruch6132, TNTRick for test ROM.
Recommended app for this rom is Aero Kernel Control by @Blechd0se, which allow tweak many hidden options
Screenshots: http://forum.xda-developers.com/devdb/project/?id=7477#screenshots
How to install:
1. Boot into CWM(cwm.img) or CMRecovery(CMRecovery.img) or TWRP(twrp.img). http://quarx2k.ru/asus_padfone_s/recovery/
2. Unlock BL by installing CrowLock_RC3.zip. Be aware! Unlock tested only on 11.10.7.18, 11.10.7.17, 11.10.7.11, 11.10.7.6, 11.10.6.1, 12.2.2.21, 12.2.2.13!!!
4. Wipe data
5. Install latest version of CM-12.0.
6. Install gapps
7. Reboot and be enjoy CM12.0!
Latest modem firmware: http://forum.xda-developers.com/showpost.php?p=60197697&postcount=259
Known bugs:
1. Dock/PAD not work. Work in progress...
If you liked this project, you can donate
Donate to Quarx
PayPal: [email protected]
AliPay ID [email protected]
Donate App in Google Play(others in my signature): https://play.google.com/store/apps/details?id=com.quarx2k.cm12donateapp
---------------------------------------
Donate to Blechd0se
PayPal: [email protected]
--------------------------------------
Donate to balika011
PayPal: [email protected]
Click to expand...
Click to collapse
Links:
http://quarx2k.org/asus_padfone_s//recovery/twrp_3.0.0.img
http://quarx2k.org/asus_padfone_s/CrowLock_RC3.zip
http://quarx2k.org/asus_padfone_s/cm-12.1-20150910-NIGHTLY-t00n.zip
Latest rom: : http://quarx.cm-for.us/device-t00n.html
XDA:DevDB Information
CyanogenMod 12.1 For PadFone S/X, ROM for the Asus Padfone X
Contributors
Quarx, balika011, Blechd0se
Source Code: https://github.com/Quarx2k/android_kernel_asus_padfone_s
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod 12.1
Version Information
Status: Stable
Created 2015-01-01
Last Updated 2017-01-13
Wow.. but afraid cannot dock binto padstation.
azm.azman82 said:
Wow.. but afraid cannot dock binto padstation.
Click to expand...
Click to collapse
I dont know what happens, if connect dock
Good job quarx.. at least we have a custom rom. Keep it up.
I am not flash recovery cwm or cmrecovery
Stuck in logo asus bro
Im flash via rom instaler jrummy
Whats you mean?
Flash recovery via fastboot or just "fastboot boot cwm.img"
To enter fastboot: PowerOn Phone with VolUp.
Quarx said:
Whats you mean?
Flash recovery via fastboot or just "fastboot boot cwm.img"
To enter fastboot: PowerOn Phone with VolUp.
Click to expand...
Click to collapse
dd if=/sdcard/cwm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Via terminal emulator sir
Stuck in logo asus
CWM Not Working
Dear, Mr. Quarx
I have tried installing CWM via Terminal Emulator and fastboot, but it always stuck in Asus Logo.
I think it's a bug. And i consider this as a report for you.
Anyway, it's really nice to have a developer like you that can bring us new hope to our device.
Thank you
BTW: i think the right command is: fastboot flash recovery cwm.img
help give me cwm sir
I am flash your rom via twrp bootloop sir
Please give me cwm or cm recovery zip
Thanks sir
@afaword, do not forget do wipe data.
And i recommend flash rom via CMRecovery.img.
CWM project killed by CM and currently bugged.
yes sir I do not forget to wipe data ..
Flash unlock + flash rom wipe data + = bootloop ..
I flash cw recovery via fasboot and elmulator terminal has successfully sir, but when entering the recovery just stuck in asus logo sir
---------- Post added at 10:19 AM ---------- Previous post was at 10:12 AM ----------
yes sir I do not forget to wipe data ..
Flash unlock + wipe data + flash rom= bootloop ..
I flash cw recovery via fasboot and elmulator terminal has successfully sir, but when entering the recovery just stuck in asus logo sir
cwm recovery & cm recovery not working sir.. success to flash but when to try enter to recovery only stuck at logo asus.. thank sir..
---------- Post added at 05:40 PM ---------- Previous post was at 05:37 PM ----------
very satisfied to try this ROM but recovery not working (cwm & cm recovery).. please help sir.. thanks a lot...
Do not flash recovery. Try just boot it via "fastboot boot"
ASUS bootloader bugged in recovery mode.
Quarx said:
Do not flash recovery. Try just boot it via "fastboot boot"
ASUS bootloader bugged in recovery mode.
Click to expand...
Click to collapse
did you post step by step sir for flash this rom?? sorry im beginner at chipset quallcom... thanks...
1,.Boot into fastboot without usb cablle.
2. Insert usb cable,
3. fastboot boot cwm.img or cm recovery.
4. Wipe + unlock(if you not unlocked already) + install cm.
Quarx said:
1,.Boot into fastboot without usb cablle.
2. Insert usb cable,
3. fastboot boot cwm.img or cm recovery.
4. Wipe + unlock(if you not unlocked already) + install cm.
Click to expand...
Click to collapse
thanks sir... i will try now...
And one more tip.
If you flashed recovery, do not reboot into it with usb cable connected. This cause black screen or asus logo bug,.
Help Sir
y4kutz4 said:
thanks sir... i will try now...
Click to expand...
Click to collapse
Im try to use "fastboot boot CMRecovery.img" but i had problem, i've got messege " FAILED <remote: dtb not found>"
@seven7sonic, interesting. Which device you have? PadFone X not supported.
1 same sir FAILED <remote: dtb not found>"
My device panfone s sir
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy A700FD Qualcomm Snapdragon variant running 5.0.2 (lollipop).
Tested Safely on following devices.
Samsung Galaxy A700FD
Why TWRP ? Why not some rooted firmware which keeps warranty safe ?
TWRP is a custom recovery. It has many more functionality than stock recovery! if something goes wrong while flashing something you can always make a backup use this recovery which can be restored when things get messed. if mess is of large extend you can always flash stock firmware.
Why new TWRP Recovery ?
The older version which was released will not be compatible with cm structure due to mount points and hence this recovery will be supportable for all custom flashing.
Instructions
Follow the instructions carefully.
Step 1 :
Install Samsung Drivers and connect your device to PC. let it install drivers and if its updating let it update. your device drivers should be perfectly installed without a single failure.
Link to Samsung Drivers
Step 2 :
Download Odin 3 you can use 3.07 or 3.09
You can download Odin from here
Download the TWRP Recovery
Step 3:
Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7 Logo
Press vol up to confirm
Step 4:
Now that you are in Odin Mode connect your device via USB cable.
Now open Odin3 3.09 or 3.07 that you have downloaded.
If there is a pop-up like Installing ADB drivers let it get finished it usually updates.
Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
Now select AP and browse to where you have .tar file and select it
Make Sure only Default Auto Reboot and F. Reset Time is ticked and nothing.verify twice only these 2 are ticked.
Untick Auto Reboot if you are installing recovery for first time!
Click Start and wait for the process to end. DO NOT Interrupt during this time.
Once it says PASS. BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON.
Done.
Credits:
TWRP Team for their awesome recovery.
@RVR for testing recovery!
XDA:DevDB Information
TeamWin Recovery Project, ROM for the Samsung Galaxy A Series
Contributors
jackeagle
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 3.0.2.0
Stable Release Date: 2016-03-07
Created 2016-03-07
Last Updated 2016-05-25
Downloads
TWRP Build 1
TWRP Build 2 (V3.0.0)
TWRP v3.0.2.0 (Build 3)
TWRP v3.0.2.0 (Build 4)
Changelog
Code:
27/06/2016
- Added Compatibility for Samsung Marshmallow Firmware Release
- Merged with Samsung Marshmallow kernel release
- TWRP upstream merge.
25/05/2016
- Fixed Recovery Loop Issues.
- Fixed MTP Media Transfer on Recovery.
- Added EFS Partition Backup Option
- Fixed Brightness Slider
- Updated TWRP to latest v3.0.2.0
07/03/2016
- Updated TWRP to v3.0.0
20/11/2015
- Initial Release
Reserved 2
I need a custom recovery for Galaxy A8 (A800F) please.
Thanks
How to root Galaxy A700FD and install a recovery running on lolipop 5.0.2.
Developers please go for Samsung Galaxy A7 A700FD ..
Sent from my SM-A700FD using Tapatalk
Nice keep posting about A700FD
Sent from my SM-A700FD using Tapatalk
TWRP Link is dead.
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
jackeagle said:
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
Click to expand...
Click to collapse
build 2 is invalid ,help
nukedanoob said:
build 2 is invalid ,help
Click to expand...
Click to collapse
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
and what if I can't flash because of secure boot enabled?
(in download mode there is a line "Qualcomm Secureboot - Enabled (CSB)" and "Write Protection - Enabled". I think this is the cause).
what should I do? any help appreciated.
nevermind. it was a faulty cable.
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
thanks
A7000 want to twrp 3.0.0too
来自我的 SM-A7000 上的 Tapatalk
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
works fine,just rename the file
Qualcomm Secure Boot is enabled and trying to flash recovery gives this message on phone
secure check fail : recovery
Custom Binary(recovery) Blocked by A/L
Odin says Fail
Solved: Disabled Reactivation Lock in security settings
Phone booting into recovery each time when I reboot the phone. How to come out of recovery mode boot loop?
Can i use it on my a7000?
Hello jackeagle, I ask you to continue the CM13 E5 project, I enjoyed the rom! If I can help in any way! even a my donation and my friends for you to continue the rom!
Always get kernel not seandroid enforcing .... i cannot boot to the system i just installed... just a blank screen
. .
CF-Auto-Root is no more working to root Samsung A8 after latest Marshmallow update. So here I'll tell you another way to root your A800F or A800I. Also I'll tell you how to install TWRP and Install Xposed. Is little bit complicated but this works.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Prerequisite :
On PC
USB Driver
Odin
Minimal ADB
TWRP Recovery
[*]On Phone Storage
SuperSU
Xposed Installer apk
Xposed SDK
DOWNLOAD LINKS BELOW
Steps
Download all files in a folder and install USB Driver (Skip if already installed). Extract Minimal ADB. Save SuperSU zip on your phone's storage.
Enable developer option on phone ( Tap “Build number” seven times to enable Developer option ).
Enable OEM unlock and USB debugging under developer option.
Put phone in download mode ( Hold vol down + home + power key to reboot to download mode )
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number.
Now select the recovery file that you have to flash/install on your phone. Click on ‘PDA’ / ‘AP’ and select the file ‘recovery.tar’. (In ODIN, check the Auto Reboot and F. Reset Time options, if not already.) Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete. After the installation is completed, your phone will reboot normally.
Next you have to launch the ADB drivers file. Launch command.bat file from the ADB folder and give the first command to check whether the device is successfully connected to PC or not. A popup will open in your phone. tap allow.
Code:
adb devices
Enter another command to reboot your device into recovery:
Code:
adb reboot recovery
Now you are on TWRP recovery. Click on Install and select SuperSU file that you downloaded on your phone in step 1. and flash.
Flash Xposed SDK too if you want to use Xposed framework
You will get bootloop first time. Its normal. And first boot may take about 10 mins. You don't have to worry. After reboot install Xposed installer to use Xposed.
Done :laugh:
Notes
Do not reboot to TWRP recovery using key combinations. Use any rebooter app to reboot to recovery.
This way is enforcing not permissive. I am searching for permissive. I'll update.
This method works on latest stock firmware.
Downloads
On PC
USB Driver size: 9.2MB
Odin size: 1.1MB
Minimal ADB size: 628.5KB
TWRP Recovery (A800F) size: 10.4MB
TWRP Recovery (A800I) size: 10.4MB
[*]On Phone Storage
SuperSU size: 4.1MB
XposedInstaller size: 611.8KB
xposed-v85.1-sdk23-arm.zip size: 4.6MB
xposed-uninstaller.zip size: 304KB
no command error
z.
adarshbp010 said:
after typing in in the command.bat
it say updating android in my phone after that says no command
did i do something wrong?
Click to expand...
Click to collapse
You have to launch command.bat please read step 7 again. :good:
Hi,
I guess with proper usb driver for other Samsung A series it should work as well ?
Thank you for this guide btw (even though it is not for my device)
shu006 said:
You have to launch command.bat please read step 7 again. :good:
Click to expand...
Click to collapse
..
adarshbp010 said:
Sry i was using some other method
Ur method bought me to a menu sayin reboot now ,install from adb ,install from sd thing
Wat should i do? ;-;
Click to expand...
Click to collapse
Are you on twrp ?
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
my problem is sam. whtas we can. help please
I did all the steps..
but I get seandroid error..
help please
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
fatihyildirim said:
my problem is sam. whtas we can. help please
Click to expand...
Click to collapse
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
ethanhunt2202 said:
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
Click to expand...
Click to collapse
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
Thread updated. Please download recovery for A800I from download section.
Good working.
Sent from my SM-A800I using XDA-Developers Legacy app
Does the bluetooth work flawlessly using this method?
jumpinjellyfish said:
Does the bluetooth work flawlessly using this method?
Click to expand...
Click to collapse
yes
Cant Enter Recovery Mode
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Thien170598 said:
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Click to expand...
Click to collapse
Firmware version ?
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
biso46 said:
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
Click to expand...
Click to collapse
Dont look at that.. Just see if framework is installed or not.
Links not working..
TWRP for C9LTECHN/SM-C9000 Galaxy C9 Pro
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
How to intall TWRP using ODIN
1) Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
2) Go back to the main Settings page, scroll to bottom and select“Developer options” from there.
3) Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4) Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
5) Switch off your device.
6) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an “Added!!” message. If not then your device is not connected properly
7) Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
8) Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device
NOTE: YOU MAY HAVE TO UNCHECK AUTO REBOOT IN THE OPTIONS TAB IN ODIN
TWRP source code: https://github.com/TeamWin
Source code device tree: https://github.com/travismills82/twrp_android_device_samsung_c9ltechn https://github.com/TeamWin/android_device_samsung_c9ltechn/
TWRP Nougat Download: https://www.androidfilehost.com/?fid=889964283620775437
TWRP Oreo Download: https://www.androidfilehost.com/?fid=1322778262903985796
no-verity-no-encrypt: https://www.androidfilehost.com/?fid=745425885120752506
ROOT OPTIONS:
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Contributors @travis82 @k2wl @deadman96385
I can confirm this works. backup, mount data, restore, otg usb, install.
I am runnung it now
Does this work on a SM-C9000?
Flavio said:
Does this work on a SM-C9000?
Click to expand...
Click to collapse
That's already for C9000. Can't you see the c9ltechn article. That's c9 pro's code
Thank you. I have already installed it.
I have flashed TWRP, formatted Data twice, flashed no-verity-opt-encrypt-5.1.zip, flashed SuperSU and after that I can mount Data. But after a reboot I can't anymore? Am I doing something wrong?
Flavio said:
Thank you. I have already installed it.
I have flashed TWRP, formatted Data twice, flashed no-verity-opt-encrypt-5.1.zip, flashed SuperSU and after that I can mount Data. But after a reboot I can't anymore? Am I doing something wrong?
Click to expand...
Click to collapse
You can flash any file still that just an article but you can't mount data anymore or backup data
I can flash files but cannot mount Data. I presume it is still encrypted despite being formatted twice?
Format data and reboot to recovery
ivanox1972 said:
Format data and reboot to recovery
Click to expand...
Click to collapse
So in TWRP format Data and then reboot again in TWRP.
And then flash SuperSU and no_verity?
Ok, I formatted Data twice in TWRP. Mounting Data works.
I flashed SuperSU in TWRP. Mounting Data works.
I flashed no_verity. Mounting Data works.
I rebooted into TWRP. Mounting Data works.
I rebooted into system and then switched off and rebooted into TWRP. Mounting Data does not work.
What am I doing wrong?
Correction:
I have now used this no-verity-no-encrypt_ashyx file:
https://www.androidfilehost.com/?fid=24591000424951049
And now Data stays decrypted!
I do have a stock debloated rom that is made out of HK firmware if this community is interested, I can put it up. All I see is you guys using Aurora. Anyone interested or do you all want to stick to Aurora rom?
I tested it few days, it works perfect and it is perfectly debloated
Please share Travis. Thank you for your work.
travis82 said:
I do have a stock debloated rom that is made out of HK firmware if this community is interested, I can put it up. All I see is you guys using Aurora. Anyone interested or do you all want to stick to Aurora rom?
Click to expand...
Click to collapse
can you share it please ???
I presume you would have to flash GApps separately with this ROM?
Flavio said:
I presume you would have to flash GApps separately with this ROM?
Click to expand...
Click to collapse
no god no, HK firmware has gapps built in like normal. I'll tweak it up some more and release it today on a separate thread. Right now I'm trying to get kernels to boot-up since they compile fine.
travis82 said:
I do have a stock debloated rom that is made out of HK firmware if this community is interested, I can put it up. All I see is you guys using Aurora. Anyone interested or do you all want to stick to Aurora rom?
Click to expand...
Click to collapse
I am interested, currently I just using the package disabler to disable all bloat samsung app..
do you have flashable s8 systemui for c9pro.. thanks
TWRP updated with a new kernel, USB MTP is now working. Everything should be working now.
travis82 said:
TWRP updated with a new kernel, USB MTP is now working. Everything should be working now.
Click to expand...
Click to collapse
Awesome work buddy, ill try to make my own ROM for this device :highfive:
will be pushing f2fs and ntfs support soon too when TWRP becomes official.
OrangeFox Recovery Project
Code:
Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you.
OrangeFox is FREE SOFTWARE
Supports MIUI and Custom Roms
Credits
* OrangeFox Recovery Project Team
* @LUNARIO, who did ALL the work, but sadly opened a thread violating the rules and the link to Recovery was deleted and the thread moved. Original here.
FEATURES:
* Touch Screen every single time
* Decryption works
* Fixed Error 7 while clean or dirty flashing (starting from version 6)
* Migrate backup installation (starting from version 6)
* OTG support
* ROM Flashing works 100%
* F2FS Support
* Fastboot commands supported
NOT WORKING FOR NOW:
* Fastbootd
* ADB Sideload
* Backing up and restoring Image Flash (system-vendor-product)
DOWNLOAD
Version 6 - Google: https://drive.google.com/file/d/1eHM9ST9ni-55bbT3z-TGSZQsgE3KYr9s/view
OLD VERSION DOWNLOAD
Version 4 - Google: https://drive.google.com/file/d/1Qq6hqaEOstxajOC7Y6AGeRYajhMWjttL/view
Version 0 - Sourceforge: https://sourceforge.net/projects/or...x-R11.0_0_Alpha-Unofficial-surya.img/download
INSTALLATION
1. Download the OrangeFoxRecovery IMG file to your PC.
2. Restart your POCO X3 in Fastboot mode (Power+Vol Down)
3. Use ADB and type in the following command:
Code:
fastboot flash recovery "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
4. After it is installed successfully, type in this command:
Code:
fastboot boot "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
5. The device will automatically reboot into OrangeFox Recovery after installation (allow this to happen)
6. Enjoy!
Version Information
Status: Alpha
Alpha Release Date: 2020-10-14
Does it support dd commands to backup/flash persist.img?
I tried but after I flashed xiaomi eu and went back to recovery, the touchscreen would't work
hope this gets updated i like this recovery
olujnap316 said:
hope this gets updated i like this recovery
Click to expand...
Click to collapse
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
jeryll said:
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
Click to expand...
Click to collapse
yes i saw that on telegram. but why is it not updated on this thread.
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
oh, you were talking about the thread itself, sorry... but the recovery itself will work the same regardless number of posts here on xda or telegram... I personally don't care where are new versions announced...
Not affiliated
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@jeryll @olujnap316
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
billabongstaff said:
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@[email protected]
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
Click to expand...
Click to collapse
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Thank you
olujnap316 said:
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Click to expand...
Click to collapse
Thank you, man.
I appreciate it.
I'll try to keep the thread updated.
Best regards,
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
of course there are, you can use Google search with the exact query you posted here and you can then choose where to start learning or click here...
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
Very good for Beginners. ▼
For ADB
https://android.tutorials.how/adb-commands/#adb_devices_command
For FASTBOOT
https://android.tutorials.how/fastboot-commands/
Update.
New build is up.
Version 6.
Fixes error 7 while clean or dirty flashing.
Backup migration now works.
Cheers.
Thanks guys. Made small instructions video for the absolute noobs (me included).
Tools used: https://developer.android.com/studio/releases/platform-tools
Instructions on adb commands and flashing:
1. Bootloader Unlocked
2. Download the latest Orangefox boot.img from first post and put it into a dedicated folder in your computer.
3. Go to the folder where you have put the Orangefox-file. Now open a command window inside that folder. To do that hold together "Shift + Right click" on any empty white space inside the folder and then select "Open PowerShell Window Here" or "Open Command Window Here" (depends on your pc).
4. Enter fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
5. Enter the terminal command in command line: >>fastboot flash recovery OrangeFox-R11.0_6_Alpha-Unofficial-surya.img
(Needs to be exactly as the name of the file, in case developer uploads new version with new name)<<. Attention: Do not restart your device otherwise Xiaomi's original recovery might overwrite Orangefox!
6. After, device will reboot into Oangefox recovery.
Video Tutorial: https://youtu.be/E7fl_02Kgc8
I had also downloaded the latest Magisk zip (not Manager) from here: https://github.com/topjohnwu/Magisk/releases and placed it into the device before flashing Orangefox, so that i flash Magisk directly from recovery (as we left it above), in order to ensure it will not lose Orangefox installation after reboot.
In case it does not automatically reboot, hold +VOL + Power Button in order to reboot into the new orangefox recovery and install magisk zip from there ( do not forget to have it downloaded somewhere on your device before initiating the procedure)
Thanks everyone, especially OP for his contributions!
Factory reset /wipe prevents userdata to be decrypted? For twrp after you do a factory reset you have to format userdata even without password/pin inside the OS.
Can i backup persist partition with this recovery?
Hi!
I'm getting the error "Failed to map file" while I try to flash Magisk in this recovery.
Any help?
Hope this recovery will be official soon ! I don't know why there is no stable built yet of twp or yours ! I'm waiting for it to flash !
Jess182 said:
Can i backup persist partition with this recovery?
Click to expand...
Click to collapse
Yes you can using dd.