Hello friends,
I was trying to update the ROM on my Galaxy Ace S5830C and saw what needed to be installed on the mobile ClockWordMod before proceeding with the implementation of the sdcard zip, the problem is that installing CWM the phone just started showing a message, I believe it's something with the partition and folder / system. I ask your help to solve the problem!
Below are the error messages:
Error message as it enters the Recovery menu (still shows the old recovery):
E:failed to mount /system(invalid argument)
E:failed to mount /system(invalid argument)
Click to expand...
Click to collapse
Error message when I try to wipe reset / factory or installing any update via zip:
Formatting /data...
E:format_volume: rfs format failed on /dev/stl11
Formatting /data...
E:format_volume: rfs format failed on /dev/stl10
Data wipe complete.
Click to expand...
Click to collapse
And Wipe cache:
E:format_volume: rfs format failed on /dev/stl10
Click to expand...
Click to collapse
And before I forget, ACKNOWLEDGES THAT THE ONLY ODIN The is the version 1.85, versions superiors do not recognize the phone (not even show the active input COM) making it impossible to install the stock version on mobile. What makes me incapable of any form of recovery of the same. [/ Indent]
When I try to run the ODIN 1.85, in part to it's BcmBoot.img (spends a lot of time and goes nowhere), the following log:
NOTE: The phone is not noticed any difference, the number (count) always remains at zero.
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_S5830CVJLB3.tar.md5 is valid.
<OSM> PDA_S5830CVJLB3.tar.md5 is valid.
<OSM> PHONE_S5830CVJLB1.tar.md5 is valid.
<OSM> CSC_S5830CZTALB2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmBoot.img
Click to expand...
Click to collapse
Looking forward to an answer, my sincere requests for help.
Sorry for my bad english, translated by Google Translator.
Regards,
RhĂșlio Victor
Have you rooted?? And make sure the CWM is made for your device itself
USING XDA APP ON SONY XPERIA U st25i
cyanide0007 said:
Have you rooted?? And make sure the CWM is made for your device itself
USING XDA APP ON SONY XPERIA U st25i
Click to expand...
Click to collapse
I don't make ROOT and CWM was not for my phone, I got the model from another Galaxy Ace was thinking the same.
rhulio said:
I don't make ROOT and CWM was not for my phone, I got the model from another Galaxy Ace was thinking the same.
Click to expand...
Click to collapse
Oh then 1st t root your phone then search for the compatible CWM for 5830c
USING XDA APP ON SONY XPERIA U st25i
Good aftternoon,
I've been trying to update my bootloader/modem from here
Edgars Latest BOOTLOADER/MODEM Packages
Choosing 900t and downloading it and following the directions for UVU1BNH5 it still shows up as NF6 no matter how many times I flash in the about settings.
I don't see any errors in Odin 3 and it flashes fine. I've pulled the battery before and after multiple times.
Anyone run into this and have a fix?
Alan Shore said:
Good aftternoon,
I've been trying to update my bootloader/modem from here
Edgars Latest BOOTLOADER/MODEM Packages
Choosing 900t and downloading it and following the directions for UVU1BNH5 it still shows up as NF6 no matter how many times I flash in the about settings.
I don't see any errors in Odin 3 and it flashes fine. I've pulled the battery before and after multiple times.
Anyone run into this and have a fix?
Click to expand...
Click to collapse
What shows up as NF6? The build number will always show as NF6, but the modem should be updated.
aooga said:
What shows up as NF6? The build number will always show as NF6, but the modem should be updated.
Click to expand...
Click to collapse
Thanks,
It's the baseband number that's still showing up NF6. So it will always say that but update the modem?
Alan Shore said:
Thanks,
It's the baseband number that's still showing up NF6. So it will always say that but update the modem?
Click to expand...
Click to collapse
Could you just post a screenshot of the about phone screen?
Sent from my SM-G900T using Tapatalk
aooga said:
Could you just post a screenshot of the about phone screen?
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Attached... Thank you
Alan Shore said:
Attached... Thank you
Click to expand...
Click to collapse
Yeah it didn't flash. Where did you find Odin? Maybe its an older version.
Sent from my SM-G900T using Tapatalk
aooga said:
Yeah it didn't flash. Where did you find Odin? Maybe its an older version.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Here's a screenshot....
Alan Shore said:
Here's a screenshot....
Click to expand...
Click to collapse
Maybe wait till beanstown releases his version. The thread you posted says to do it multiple times if it doesn't work.
Sent from my SM-G900T using Tapatalk
aooga said:
Maybe wait till beanstown releases his version. The thread you posted says to do it multiple times if it doesn't work.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Alright, I'll wait for beanstown. Tried to do it multiple times, no go.
May be it a bad download. Just flashed mine an hour ago without any problem.
..
fffft said:
Your screen shot just shows you loading the modem file, i.e. before you press "start" to actually try writing it to your phone. We need an Odin log or screen shot after you press the start button to see how Odin handles it.
It's common practice to write a modem or radio file twice as they are fussy. And the bootloader @ Android 4.3 is more restrictive and will sometimes return an auth failure if you flash the modem alone. The workaround if that happens is to first address timing e.g. try a different USB cable and port, disable firewall and malware programs, etc. And if necessary, flash the full stock firmware that contains the desired modem. The latter when Odin simply refuses to flash the modem only.
But first we need to see if Odin is succeeding or not. And your screenshot was taken before the write cycle finished.
Also, confirm that your device is in fact a 900T model, not another variant e.g. 900A, 900F, etc.
.
Click to expand...
Click to collapse
I had similar problems every time I tried to update - I found the best solution for me was to flash the entire TAR - everything - not just firmware and modem but the full tar.
The downside is you have to reroot - and you have to re-flash recovery - but that doesn't take too much time - bottom line, I usually have to flash the full stock tar file once - sometimes twice - but never more than two -
I also found that I had to always use Odin 3.09 - but from the screen shot you posted, it looks like youi have that version of Odin anyway - so maybe try flashing the full stock tar and see if that helps.
Good Luck...
joking said:
May be it a bad download. Just flashed mine an hour ago without any problem.
Click to expand...
Click to collapse
Yea, not sure what it is I gave it a couple days just to settle and tried downloading the bootloader and modem and when I tried mounting them it md5 failed. I used an older download of the same modem and low and behold it flashed successfully first try. Am now BHN5. Still don't understand why it works part of the time. Thanks for all your help
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900T-UVU1BNH5-BOOTLOADER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900T-UVU1BNH5-MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> rpm.mbn
<ID:0/013> sbl1.mbn
<ID:0/013> sdi.mbn
<ID:0/013> tz.mbn
<ID:0/013> modem.bin
<ID:0/013> Transmission Complete..
<ID:0/013> Now Writing.. Please wait about 2 minutes
<ID:0/013> Receive Response from boot-loader
<ID:0/013> NON-HLOS.bin
<ID:0/013> Transmission Complete..
<ID:0/013> Now Writing.. Please wait about 2 minutes
<ID:0/013> Receive Response from boot-loader
<ID:0/013> RQT_CLOSE !!
<ID:0/013> RES OK !!
<ID:0/013> Removed!!
<ID:0/013> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM , using ROM of this thread : https://forum.xda-developers.com/galaxy-grand-2/orig-development/dev-preview-lollipop-galaxy-grand2-sm-t2949693
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
EDIT
The reason behind this wanted change is because the annoying appearance of these messages :
android.process.acore has stopped
Unfortunately, the process com.google.process.gapps has stopped.
I have disabled "Google Play services" & "Google Play Store" to prevent these messages from appearing again : I used substitutes instead like Yalp & F-droid : I have had a good time with my phone for months, but lately there appeared other annoying problems :
1- I can not activate WiFi !!
2- Whenever I use Camera there's : photos taken are black AND/OR not saved
3- I can never access galery
4- I can only go through the File Manager but I can no longer manipulate files : create directories ..
Any solutions for any of these problems please ??
ahmed_aek said:
I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/ga...lopment/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
ODINRecovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
RQT_CLOSE !!
RES OK !!
Removed!!
Remain Port .... 0
All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
Click to expand...
Click to collapse
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
RealWelder said:
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
I DID , but nothing changed
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
lugnut2099 said:
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
Click to expand...
Click to collapse
I know this isn't the right place for this, but, the Hydro Air does have recovery... It's just stock though. The only way to get to it is to adb reboot recovery. The lack of root and recovery is why I use it as my daily... I don't know how many times I've soft-bricked my daily and had to be without a phone until I figured it out. Lol.
Sent from my KYOCERA-C6745 using Tapatalk
Hi to all!!
My name is lucas, I rooted my S9+ smg9650 with @klabit87 posts and info (TWRP installed). Everything perfect, root working. Today i Wanted to upgrade my ROM from android 8.0 to 10. had problems with data partition but got them repaird with TWRP, but muy problem was that ODIN did not flash the new ROM, it stayed frozen "SetupConnection.." or "initialization.. " and then FAIL, USB debugging and OEM unlock were set. Finally I got tierd and decided that i wanted to set everything to stock, so i made a full buckup, and i dont know why, i flashed a recovery image from a andoid 10 rom, using TWRP app, when rebooted, stays at bootloop, i can use download mode, but cant flash TWRP back with odin, nor any other firmwere. Cant turn phone off, Cant get to recovery mode.
Left cornet message on bootloop., (Same massage on download screen)
RPMB fuse blown
RPMB provisoned
Current binary: custom
System status: custom
FRP lock off
oem lock: off
warranty void: 0x1 (0x30c)
qualcomm secreboot: Enable
RP SWREV : B3 (2,2,2,3,2) K3 S3
SECURE DOWNLOAD : ENABLE
DID: 20208B33D8317411
Any ideas, i beel reading every post i could find online, but cant get to solve this.
any idea could help.
Thanks!!
Canita2000 said:
Hi to all!!
My name is lucas, I rooted my S9+ smg9650 with @klabit87 posts and info (TWRP installed). Everything perfect, root working. Today i Wanted to upgrade my ROM from android 8.0 to 10. had problems with data partition but got them repaird with TWRP, but muy problem was that ODIN did not flash the new ROM, it stayed frozen "SetupConnection.." or "initialization.. " and then FAIL, USB debugging and OEM unlock were set. Finally I got tierd and decided that i wanted to set everything to stock, so i made a full buckup, and i dont know why, i flashed a recovery image from a andoid 10 rom, using TWRP app, when rebooted, stays at bootloop, i can use download mode, but cant flash TWRP back with odin, nor any other firmwere. Cant turn phone off, Cant get to recovery mode.
Left cornet message on bootloop., (Same massage on download screen)
RPMB fuse blown
RPMB provisoned
Current binary: custom
System status: custom
FRP lock off
oem lock: off
warranty void: 0x1 (0x30c)
qualcomm secreboot: Enable
RP SWREV : B3 (2,2,2,3,2) K3 S3
SECURE DOWNLOAD : ENABLE
DID: 20208B33D8317411
Any ideas, i beel reading every post i could find online, but cant get to solve this.
any idea could help.
Thanks!!
Click to expand...
Click to collapse
You'll need to start over with first using Odin to flash an Android 10 firmware package. Note that there is no going back once you do this.
Then follow the posts in the twrp thread to reach a rooted stock Android 10 setup.
If you're having issues with Odin connecting, you'll need to double check your drivers, cables, ports, or possibly even a different PC.
Sent from my Pixel 2 XL using Tapatalk
klabit87 said:
You'll need to start over with first using Odin to flash an Android 10 firmware package. Note that there is no going back once you do this.
Then follow the posts in the twrp thread to reach a rooted stock Android 10 setup.
If you're having issues with Odin connecting, you'll need to double check your drivers, cables, ports, or possibly even a different PC.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Hi,
Thnx for your reply!! my problem is that i cant flash anything with odin:
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 35 M
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 35 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
Tried 3 diffrent ROMS, and tried flashing only TWRP again but cant. i dont know if my bootloader locked and cant run de CROM service, since i cant run android.
i never got to Android 10 working, i am downloading 2 more stock roms (andoid 8) to see if odin flashes them, I tried reseting download moda and start odin as fast as i could (i read that this fixed odin issue somtimes) but with no good result on my side, tried like 30 times, all the USB on my pc, and 2 difrent cables.
Canita2000 said:
Hi,
Thnx for your reply!! my problem is that i cant flash anything with odin:
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 35 M
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 35 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
Tried 3 diffrent ROMS, and tried flashing only TWRP again but cant. i dont know if my bootloader locked and cant run de CROM service, since i cant run android.
i never got to Android 10 working, i am downloading 2 more stock roms (andoid 8) to see if odin flashes them, I tried reseting download moda and start odin as fast as i could (i read that this fixed odin issue somtimes) but with no good result on my side, tried like 30 times, all the USB on my pc, and 2 difrent cables.
Click to expand...
Click to collapse
When Odin says it failed, what did your device show? It should show an error or something. I think it would be in red lettering.
Sent from my Pixel 2 XL using Tapatalk
klabit87 said:
When Odin says it failed, what did your device show? It should show an error or something. I think it would be in red lettering.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Have tried a new Rom, Android 8 (G9650ZCU3ARH4) https://stockfirmware.info/sm-g9650-firmware-samsung-s9-plus-g9650zcu3arh4/
Same error.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6066 M
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing changed on the download screen, stayed the same the whole process.
Canita2000 said:
Have tried a new Rom, Android 8 (G9650ZCU3ARH4) https://stockfirmware.info/sm-g9650-firmware-samsung-s9-plus-g9650zcu3arh4/
Same error.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6066 M
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing changed on the download screen, stayed the same the whole process.
Click to expand...
Click to collapse
That firmware is extremely old. You probably should at least try with one of the first versions that are Android 10. Also, if you don't have the Samsung Dex desktop app, install that as well. It should help resolve some driver issues if that is causing problems.
Sent from my Pixel 2 XL using Tapatalk
klabit87 said:
That firmware is extremely old. You probably should at least try with one of the first versions that are Android 10. Also, if you don't have the Samsung Dex desktop app, install that as well. It should help resolve some driver issues if that is causing problems.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
I have the following andoid 10 Roms:
G9650ZHU6DTA7 - debloted - https://forum.xda-developers.com/galaxy-s9-plus/how-to/snapdragon-s9-sm-g9650-android-10-t4048625
G9650ZHS6DTB4 - https://sfirmware.com/downloads-file/135138/SM-G9650_2_20200229043228_tal4inqtnt_fac
In both having the same problem as shown previously, have delted and reinstalled Samsung drivers (Samsung_USB_Driver_v1.7.23.0) and restart PC.
Also downloades Dex, does not recognize any device. Odin still not working.
Canita2000 said:
I have the following andoid 10 Roms:
G9650ZHU6DTA7 - debloted - https://forum.xda-developers.com/galaxy-s9-plus/how-to/snapdragon-s9-sm-g9650-android-10-t4048625
G9650ZHS6DTB4 - https://sfirmware.com/downloads-file/135138/SM-G9650_2_20200229043228_tal4inqtnt_fac
In both having the same problem as shown previously, have delted and reinstalled Samsung drivers (Samsung_USB_Driver_v1.7.23.0) and restart PC.
Also downloades Dex, does not recognize any device. Odin still not working.
Click to expand...
Click to collapse
Man I don't know to be honest. I just upgraded from February patch 10 to April patch myself. Didn't have any issues. You can't go back to Oreo though. You're only able to use Android 10 now due to rollback protection.
If you can, I would try a different computer or even possibly a virtual machine with Windows 10 or windows 7 on it.
Sent from my Pixel 2 XL using Tapatalk
Canita2000 said:
I have the following andoid 10 Roms:
G9650ZHU6DTA7 - debloted - https://forum.xda-developers.com/galaxy-s9-plus/how-to/snapdragon-s9-sm-g9650-android-10-t4048625
G9650ZHS6DTB4 - https://sfirmware.com/downloads-file/135138/SM-G9650_2_20200229043228_tal4inqtnt_fac
In both having the same problem as shown previously, have delted and reinstalled Samsung drivers (Samsung_USB_Driver_v1.7.23.0) and restart PC.
Also downloades Dex, does not recognize any device. Odin still not working.
Click to expand...
Click to collapse
I've been on this issue for a few weeks now trying to see if I can fix it. As of right now I have the same issue. So we'll see. Most say use a hub or another PC and it works. So does on mine. So yea I could. But screw that where's the fun. Let me do some more tests. Because I've tried everything from driver enforcement to bios settings. Drivers and more. And still no go. I can also add upon reboot I get a last USB connected was not recognized. And have to reboot download mode. So I do believe the pc is trying to talk to the device just not fully opening the com\serial port
TheMadScientist said:
I've been on this issue for a few weeks now trying to see if I can fix it. As of right now I have the same issue. So we'll see. Most say use a hub or another PC and it works. So does on mine. So yea I could. But screw that where's the fun. Let me do some more tests. Because I've tried everything from driver enforcement to bios settings. Drivers and more. And still no go. I can also add upon reboot I get a last USB connected was not recognized. And have to reboot download mode. So I do believe the pc is trying to talk to the device just not fully opening the com\serial port
Click to expand...
Click to collapse
I am trying to get fastboot runing, but nothing, only bootloop or download mode, tried reintalling drivers, difrent roms, reseting download mode, canceling download mode.
nothing working so far.
i suspect that USB debbuging locked itself and does not let me flash with odin
Canita2000 said:
I am trying to get fastboot runing, but nothing, only bootloop or download mode, tried reintalling drivers, difrent roms, reseting download mode, canceling download mode.
nothing working so far.
i suspect that USB debbuging locked itself and does not let me flash with odin
Click to expand...
Click to collapse
fastboot isn't available for Samsung devices and USB debugging wont lock you out of going to download mode or recovery.
Sent from my Pixel 2 XL using Tapatalk
klabit87 said:
fastboot isn't available for Samsung devices and USB debugging wont lock you out of going to download mode or recovery.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Beat me to it
TheMadScientist said:
Beat me to it
Click to expand...
Click to collapse
Thanks, so i wount try anymore with fastboot or ADB,
i will try on a MAC pc i have and Jodin 3. will come back with any news.
on the other hand, afer installing all dirvers i could find online, my device manager shows the phone as "samsung mobile cdc composite device" and shows as working properly. Odin recognizes the phone, but still can flash anything.
Canita2000 said:
Thanks, so i wount try anymore with fastboot or ADB,
i will try on a MAC pc i have and Jodin 3. will come back with any news.
on the other hand, afer installing all dirvers i could find online, my device manager shows the phone as "samsung mobile cdc composite device" and shows as working properly. Odin recognizes the phone, but still can flash anything.
Click to expand...
Click to collapse
Yea it will eventually fail and show that it could not open the com or serial port same here. It's most definitely a windows issue. If we can get known users to chime in when there device is connected in download mode to show me what their devices show in device manager.
Mine shows as Samsung composite USB. And a Samsung modem as well. I've been messing with the modem shown. If you disable that or mess with it while in download mode it won't show added or detected. So I'm thinking it's in that modem driver and not the composite
TheMadScientist said:
Yea it will eventually fail and show that it could not open the com or serial port same here. It's most definitely a windows issue. If we can get known users to chime in when there device is connected in download mode to show me what their devices show in device manager.
Mine shows as Samsung composite USB. And a Samsung modem as well. I've been messing with the modem shown. If you disable that or mess with it while in download mode it won't show added or detected. So I'm thinking it's in that modem driver and not the composite
Click to expand...
Click to collapse
MAC not working, Heimdall could not get my PIT file, and tried using the one inside de CSC and same result, PIT corrupted.
So back to my PC and trying to get the drivers to work.
How should i see my device on device manager? Samsung s9650? Andoid phone? Samsng modem?
klabit87 said:
Man I don't know to be honest. I just upgraded from February patch 10 to April patch myself. Didn't have any issues. You can't go back to Oreo though. You're only able to use Android 10 now due to rollback protection.
If you can, I would try a different computer or even possibly a virtual machine with Windows 10 or windows 7 on it.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Downloaded a device analizer called Temple 1.17.
Shows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas? is there a way to edit driver to think its reading a 9650?
Edit:
Also tried a new windows 8 partition, with absolitly nothing, justo samsung drivers and odin, same problem, and detects de phone the same way.
sorry if i have spelling mistakes, english is not my native language