Q&A for Elephone p6000_CyanogenMod12.1 based on Android 5.1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Elephone p6000_CyanogenMod12.1 based on Android 5.1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is everything working? Why there is "MT6752_Android_scatter.txt" and not "MT6732_Android_scatter.txt"?
Good ROM CM12.1 for Elephone
Almost everything works fine.
Only issues I encouter (but I can still use the phone quiet well)
* Not found a working recovery - loss of sim card settings and loss of wifi settings after reboot
* GPS not working for me
* screen sometimes stays on
Still a fast an stable ROM :good:
I install Cyanogen ROM and back camera and recovery don't work!!
Hello,
I installed this rom in my P6000, and I think it's a good one.
But I have a problem, I can't root ! I enable the root option (app + adb) in the developper options, but nothing happens ... Root Checker say me it's not rooted.
I loose my IMEI during the flash, and I can't restore them with Chamelephon, because this app need a rooted device. I can't use my phone ...
I tried to download superuser2.49 zip in order to install it in the recovery mode (it's not a custom recovery) from my sd card, but I have a message like "scatter missing" ...
I'm a noob, I'm not a developper, just an android user. My first flash was 2 days ago for my Cube U65GT, and it worked fine !
Thank you if somebody can solve my problem.
PS: and sorry for my bad english ...
Gaou said:
Hello,
I installed this rom in my P6000, and I think it's a good one.
But I have a problem, I can't root ! I enable the root option (app + adb) in the developper options, but nothing happens ... Root Checker say me it's not rooted.
I loose my IMEI during the flash, and I can't restore them with Chamelephon, because this app need a rooted device. I can't use my phone ...
I tried to download superuser2.49 zip in order to install it in the recovery mode (it's not a custom recovery) from my sd card, but I have a message like "scatter missing" ...
I'm a noob, I'm not a developper, just an android user. My first flash was 2 days ago for my Cube U65GT, and it worked fine !
Thank you if somebody can solve my problem.
PS: and sorry for my bad english ...
Click to expand...
Click to collapse
try reflashing the stock rom through SPFT.
Related
[Q&A] [ROOT][CWM][ROM]Pantech Discover P9090 (Magnus) Root & Modification Guide
Q&A for [ROOT][CWM][ROM]Pantech Discover P9090 (Magnus) Root & Modification Guide
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT][CWM][ROM]Pantech Discover P9090 (Magnus) Root & Modification Guide. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
4G LTE doesn't work
Hi, I have a problem from one day to another I can't connect to LTE. Any idea about the problem?
Please remove this stupid 10 post restriction. I got my 10 posts and it's still not allowing me to post in the main thread. Maybe it needs 11? Argh.
Pantech discover issues
I have a pantech discover unlocked running ICS 4.0.4 and m facing following issues:
The soft keys work only 5-10% of times and I have to use button savior app for using phone. Sometimes they work normally and most times they simply do not respond at all. Is it ROM related issue or hardware issue? I have already factory reset the phone without any positive outcome.
My phone always sticks to 4G network and consumes a lot of battery. In settings there is no option to choose 2G or 3G network. Usually most android phones have an option to choose between GSM, GSM/WCDMA, etc. This phone does not have any such option in Mobile networks. Is there anything that can be done.
I am running stock ics and tried running AT&T update, it displayed an 248 MB update and downloaded it. I chose to install the update and it booted to recovery and tried installing update but failed after some time and rebooted the phone. Would like to know if there is anything that can be done to update the phone to JB.
I was able to find only two threads on xda for getting phone rooted and only 1-2 ROMS that too stock. Does anybody have a specific link to download roms for it.
I was unable to find phone drivers for Windows, does anybody have a link to them.
How should I update the phone to JB:
1. Running on ICS -> Root -> Install CWM -> Install JB ROM from xda thread
2. Running on ICS -> Officially update to JB -> Root -> Revert to unlocked ICS bootloader -> Install CWM -> Install JB Rom from xda thread
Any help would be appreciated.
Not Unlocked with Unlocked Bootloader
Hi! i am new here but i have been having some success. my unlocked discover was locked by ATT when i did their 4.1.2 upgrade. Since then i have rooted my discover, i have installed the clockwork mod, i have installed the unlocked loader and the checksums match. Unfortunately when i put my T-Mobile sim back in, the phone is still network locked. Has anyone had a similar experience? Is there a fix available? If I can download the custom rom and get a matching checksum would flashing that fix things? Any help would be appreciated. Hopefully you can see that I am trying to do my part.
Traci
Update and stuck on at&t logo
So, after much thought I followed the method two i.e.
Running on ICS -> Officially update to JB -> Root -> Revert to unlocked ICS bootloader -> Install CWM -> Install JB Rom from xda thread
Unfortunately, as soon as I updated it to JB, the phone rebooted after update and since then it is stuck on at&t logo.
The JB update overwrote my cwm recovery, flashed the locked JB bootloader and unrooted phone as well.
I can enter stock recovery and fastboot but to no use as the bootloader is locked and phone is not rooted.
I have tried wipe data and cache without any positive outcomes.
I have worked out following possible solutions:
1. Install stock jellybean rom via adb sideload as this is an option in stock recovery
2. Flash stock rom using PDL download software update mode, however, I do not have software for flashing and nor stock rom.
Any kind of help will be deeply appreciated.
Anyone?
Any kind of replay will be deeply appreciated.
How come this phone does not have stock roms available??
Also, a pdl download software upgrade method not available???
Is there a link for a flashable JB rom link or JB update link from where I can download JB rom or update and flash it onto phone via adb sideload!!!
Kindly help as m in a fix and moving around without a phone. :crying:
need help
sir can u plz update downloades link i need boot and rom
ICS bootloader image (aboot.img) for pantech discover
please I need to download ICS bootloaderr. Links on your post are not working. Please update the links or provide with a new mirror. I'd really appreciate it.
Maturo1002 said:
please I need to download ICS bootloaderr. Links on your post are not working. Please update the links or provide with a new mirror. I'd really appreciate it.
Click to expand...
Click to collapse
Me too please
Sent from my PantechP9090 using XDA Free mobile app
New to using cmd promt to mod
Hello I am new to using to command windows to mod android devices (as all my other androids are samsung and I use odin for them). I can't seem to get my computer to communicate with the phone in the command window and get responses like: 'fastboot' is not recognized as an internal or external command, operable program or batch file. Any help for the noob would be appreciated.
good guide
thanks
[Q&A] [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6
Q&A for [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, n00b post.
I'm attempting to root my phone using the following method. I've flashed my phone in recovery using odin and philz xwlsy md5 file. What do I need to do next? I'm attempting the following method..
Odin packages instructions: ready for rootThey come in the form of .tar.md5 fileboot into download modestart odin3 and configure it as in picture belowconnect phone in download mode to PC via USBpress start to flash the tar.md5 packageto root, download the root file from here (Method 1) :*http://forum.xda-developers.com/show....php?t=1746794
For most (if not all?) ICS phones having a CWM image atClockworkmod*site:Quoteownload attached*cwm-touch-6.0.x.x-i9100.zipfor the i9100 Galaxy S2.*This is the touch version but it also works with volume up/down keys and power button to select menu.CWM6 is now thought to be probably safe for wipe, no superbrick risks under ICS 4.0.4:*read more hereI also attached the cwm6 non touch version and the*recovery-clockwork-4.0.1.5-galaxys2.zip. CWM4 is also confirmed to be safe for wipe byEntropy512*Recognized DeveloperFor other phones, download the cwm image from here*http://clockworkmod.com/rommanager.Put the previously downloaded*cwm-touch-6.0.x.x-i9100.zip*file on your*external*sd cardDownload the attached root file you want as per instructions aboveI advise Chainfire SuperSU for 2 reasons: it lets you unroot from within superSU application and it lets you migrate to ChainsDD superuser if you like laterCopy the*Root_XXX.zip*file you downloaded tointernal or external*sd cardBoot into stock recovery*(volume up+home+power), and select*"apply update from external storage". Now select the*cwm-touch-6.x.x.x-i9100.zip*file you copied in previous step (this step gives a temporary flash that will disappear after reboot)You get CWM recovery interface (this custom recovery is temporary, not permanent)Inside CWM, select*"install zip from sdcard". Then, select*"choose zip from sdcard". Now, scroll down to the*"Root_XXX.zip"*file and hit power button to install it.It will add SuperSU or Supe
---------- Post added at 12:36 PM ---------- Previous post was at 11:50 AM ----------
So im guessing I use philZ md5 file then boot from the cwm into the root file? Via internal sd ? Is there an easy way without the sd? Thanks
Sorry everyone if my question looks noob,
I'm confused about what method is best suitable for my phone.
I want to root so to have full access and make a backup before upgrading to stock rom 4.1.2.
My phone: Samsung S2 GT-I9100 international, stock rom 4.0.4
What information do you need?
I think that I got all information about my phone but the whole bunch of numbers confuse and scare me a bit.
Thanks in advance.
Edit: even more confused now since my questions didn't appear into the related thread: http://forum.xda-developers.com/galaxy-s2/orig-development/04-12-2012-universal-rooting-phones-rom-t1746794/page64
xda portal sucks balls
look this ****ing crap on the side is pissing me off i cant see what people typed behind it how the **** i **** it off for good or do i just block the **** through element or veiw source worsest **** i have ever seen mnakes me not wont to research on this site plzz help me
rooted OneTouch918D
Hello,
I've rooted the mentioned phone with 'Kingo-Root', which said successfull and installed a 'Superuser'-App.
Then I've installed ROM-Manager sucessfully, but in the recovery mode there is no option 'install zip from SD-card'.
I also can't install custom ROMs, which I found with your website (for example 'deep ROM -zip'). It says 'signature failure...'.
Have I choosen th wrong rooting method, or have I to combine it which other steps afterwards?
I also don't find a cyanogenmod version to install for this phone.
I finally want to get full access and control over all permissions (aim is xprivacy or so), so to ocnfigure every app for my own.
What can you advice me?
Q&A for [TOOL][NABI] NabiLab GUI - Root, Play, Recovery for JR, XD, 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL][NABI] NabiLab GUI - Root, Play, Recovery for JR, XD, 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
XD smartscreen file
In my de-bloating zeal after rooting the XD I deleted the "nabismartscreen" file by mistake... and my sons are not going to be happy. Anyone that can pull and post the file will be my hero. Thanks!
KTCfun1 said:
In my de-bloating zeal after rooting the XD I deleted the "nabismartscreen" file by mistake... and my sons are not going to be happy. Anyone that can pull and post the file will be my hero. Thanks!
Click to expand...
Click to collapse
What software version is tablet on?
We are running Android 4.1.1, kernel 3.1.10-ge0b1727, build JRo03C on his XD. Thanks!
KTCfun1 said:
We are running Android 4.1.1, kernel 3.1.10-ge0b1727, build JRo03C on his XD. Thanks!
Click to expand...
Click to collapse
I meant the "Nabi" software version, sorry about that, my fault. Here is the one for 1.5 though.
Help with Nabi Jr.
Hi folks. First post. The youngest's tablet is stuck on a white screen and out of warranty. Restart is not working (power button and volume+). I got real excited that I could connect with a PC and sure as heck the storage was maxxed. Deleted alot to free things up but no dice. I have also tried running the battery down in hopes of a new boot but no dice. I got excited and downloaded and loaded a update on the micro SD card but that didn't boot... I should also say, that the thing responds to turning off and on and that to me is a sign not to give up. Can someone please point me in the right direction? Wondering if the NabiLab might be able to do a hard reset. If this is possible, I would read up and try it but frankly this android hacking stuff is over my head. Not opposed to ditching Fuhu root as long I get something stable. Thanks in advance! Sarcasm and ridicule encouraged...
Nabilab install
Has anyone verified the Nabilabs download link lately? I'm trying to download it to try and aid in recovery of a bricked Nabi Jr for my son, but keep getting "HTTP redirect" errors. I've disabled the browser security settings and verified my firewall isn't blocking it. Just wanted to make sure the app install was still working correctly before I invested too much time in troubleshooting.
peabody.jones said:
Has anyone verified the Nabilabs download link lately? I'm trying to download it to try and aid in recovery of a bricked Nabi Jr for my son, but keep getting "HTTP redirect" errors. I've disabled the browser security settings and verified my firewall isn't blocking it. Just wanted to make sure the app install was still working correctly before I invested too much time in troubleshooting.
Click to expand...
Click to collapse
It does look like something is broke. I don't have time to look at why tonight. Here is the stand alone version(no installer).
http://forum.xda-developers.com/showpost.php?p=59450453&postcount=2591
Please does anyone have a copy of the NabiLab GUI I have lost my file please please help
Q&A for [RECOVERY][ROOT] Ulefone Be Touch Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][ROOT] Ulefone Be Touch Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ulefone Be Touch OTA
Hi,
I have rooted my Be Touch and installed custom recovery as well using this guide
- http://forum.xda-developers.com/android/development/recovery-ulefone-touch-lollipop-t3132204
Now, there is an available OTA from the local reseller and I can't install it due to custom recovery. How do I update my phone now? The error I am getting is System is Damaged which I have attributed to CUstom Recovery upon searching google
I have the same problem to update phone. The downloaded update.zip file over OTA could be found in my SD-card, just 18.89Mb. I've tried to install it using recovery by choosing "install zip -> choose zip from sdcard". But finally I got following error:
...
Verifying current system...
"EMMC:boot:7262208:..." has unexpected contents.
E:Error in update.zip
(Status 7)
Installation aborted.
Hofefully someone could help?
yes same with me, I am trying sideloading with ADB but I do not know about that, unable to make a connection between PC and phone. Maybe someone has stock recovery image so we can perform the OTA update? Anyone can upload their stock recovery?
Reverting back to kitkat.
I tried flashing using spflash on my Ulefone Be touch, it was on lollipop and it did not transition to kitkat. it in fact got semi bricked but i got through that and fixed it. the phone was originally rebranded so it had another skin on top of it (not ulefone). how can i get it back to kitkat? do i have to root it and manually flash it on my phone? or is flashing a downgrade not possible by just regular means?
blank_blank said:
yes same with me, I am trying sideloading with ADB but I do not know about that, unable to make a connection between PC and phone. Maybe someone has stock recovery image so we can perform the OTA update? Anyone can upload their stock recovery?
Click to expand...
Click to collapse
Here is the latest stock rom: http://ulefone.com/download/betouch.html. You will find the boot.img and recovery.img in the zip file. But I'm afraid to brick my phone to have a try. Moreover I don't know whether this root method could still work if I get phone flashed successfully...
are you using a rebrand? I already flashed the recovery of Be Touch, unrooted my phone as well but OTA is still failing, even manual zip install and sideload fails. I guess it is because my phone is a rebrand and thus, uses another recovery as stock. I have used this ROM as my base now and I can confirm that root is still working
blank_blank said:
are you using a rebrand? I already flashed the recovery of Be Touch, unrooted my phone as well but OTA is still failing, even manual zip install and sideload fails. I guess it is because my phone is a rebrand and thus, uses another recovery as stock. I have used this ROM as my base now and I can confirm that root is still working
Click to expand...
Click to collapse
I think my phone is not rebrand, because there is ulefone logo on rear cover. I got it rooted with Build 20150513 ROM.
With the rooted Build 20150513 ROM, I get phone flashed with official Build 20150529 ROM successfully. Afterwards, the root method still works!
yup and i hope we get new build soon with bug fixes! Does your phone get a lot of heat when charging and browsing 3G?
blank_blank said:
yup and i hope we get new build soon with bug fixes! Does your phone get a lot of heat when charging and browsing 3G?
Click to expand...
Click to collapse
I've used several phones and can accept this one. More faster to change the phone more heat will get produced. Surfing or gaming will need more hardware resource and power for display, no wonder that it will get warm too. Maybe a metal cover will get heat better distributed, but then it will be sold in another price...
blank_blank said:
yup and i hope we get new build soon with bug fixes! Does your phone get a lot of heat when charging and browsing 3G?
Click to expand...
Click to collapse
You should try 20150702 ROM. Phone is now not less hot when charging and surfing. I did flash back to official 20150529 ROM and then do the OTA update.
There is a ROM of ulefone be touch 2 on needrom !
Rooted Be Touch 2, Xposed, Loving it.
Hi folks. I used this process to successfuly root my Ulefone Be Touch 2. Instead of the provided recovery.img and boot.img, I used a version of Carliv Recovery and the Be Touch 2 boot.img found through needrom and it worked perfectly.
I was also able to install Xposed Framework by changing the Android version from 5.1 to 5.0 in prop settings (using BuildProp Editor) - which is fine since most say it's fake 5.1 anyway.
Does anyone know whether people have successfully installed custom roms to the Be Touch 2? I find the stock ROM laggy - more so than it should be - but I hesitate to install something like CM or Liquidsmooth without knowing.
Thanks again to the OP!!
Looking for Be Touch 2 Root and Recovery too! Any luck? Thanks in advance!
Download link dosen´t work
Hi, I don´t get the download link to work. I only gets the error code "403 forbidden". Can you please upload the files again, thanks.
[edit] Got it working, was just my antivirus that was blocking it for some reason
It worked!!
Thanks alot man.
I have looking for a root to this device since i got it, and now its rooted
I got this working on win10 (and also working on win8/8.1), but what you have to do is disable "driver signature enforcement". Check this vid if you don´t know how (youtube.com/watch?v=PAxTCvRmlio)
Please make a video
Please Im really new to rooting I have always had iOS and I would really appreciate it if anyone would like to make a video tutorial
Error while trying to root Be Touch 2
Hi,
After following http://forum.xda-developers.com/android/development/recovery-ulefone-touch-lollipop-t3132204 i get to the download part after selecting boot and recovery.
BDROM ERRPR : S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!
[HINT] : Please check your load matches to your target which is to be downloaded.
And now the phone won't boot. It does detect when the battery is removed on com15, can I use any other tools to at least boot the phone?
all0gIc said:
Hi,
After following http://forum.xda-developers.com/android/development/recovery-ulefone-touch-lollipop-t3132204 i get to the download part after selecting boot and recovery.
BDROM ERRPR : S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!
[HINT] : Please check your load matches to your target which is to be downloaded.
And now the phone won't boot. It does detect when the battery is removed on com15, can I use any other tools to at least boot the phone?
Click to expand...
Click to collapse
Or to download the correct files?
Fingerprint scanner
Does this include functionality for the fingerprint scanner of the ulefone be touch 2 or nah?
Q&A for [ROOT/KERNEL] Root Method for FOG6 / 5.1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT/KERNEL] Root Method for FOG6 / 5.1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
FOG6 Root
Thanks to all.
Everything seems to work including Camera and MHL.
WiFi password needed to be re entered but its now remembered.
One question:
At top of Startup screen the following message appears that is not understood nor do I know how to address:
"KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel"
Whats it mean and what do I do?
Robbbbert said:
Thanks to all.
Everything seems to work including Camera and MHL.
WiFi password needed to be re entered but its now remembered.
One question:
At top of Startup screen the following message appears that is not understood nor do I know how to address:
"KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel"
Whats it mean and what do I do?
Click to expand...
Click to collapse
In a nutshell, not the stock kernel/boot.img. causes any harm? No Any way you can remove it? No
A couple of harmless lines at boot, can live with that.
Thanks to your efforts, phone works fast and flawlessly.
Take care.
Update to FOG6
Updated from OB1 to FOG6 and used Trapkernel. Everything works except wi-fi calling. Can anyone verify and eventually provide a fix? Wi-fi calling shows disabled even when you turn it on.
Steps are:
1. Defrost any bloatware (especially Knox)
2. Reboot to download.
3. Flash G900TUVU1FOG6_G900TTMB1FOG6_G900TUVU1FOG6_HOME.tar .md5 in Odin and let phone restart normally.
4. Do all your settings (if you need) or at least verify the most important for you.
5. Copy G900T_FOG6_TrapKernel.zip to sd card.
6. Reboot to download and flash twrp-2.8.7.0-klte.img.tar in Odin, but uncheck Auto Restart
7. When done, pull battery then start in recovery mode
8. Do not allow twrp to install supersu. From twrp flash G900T_FOG6_TrapKernel.zip from sd card.
9. Restart phone and enjoy
If baseband does not update, in odin flash modem from http://d-h.st/gHL
No Luck - Getting E footer is wrong; E signature verification failed
Thus far, I've been unable to get this to work. I've downloaded the file several times, checked its MD5, placed it on the root of my SD card, and keep getting the following errors:
E footer is wrong
E signature verification failed
I've tried wiping the cache and renaming the .zip file as well - nothing has worked. Do I need to do a full reset along with wiping the cache?
Thanks.
j3n3alon said:
Thus far, I've been unable to get this to work. I've downloaded the file several times, checked its MD5, placed it on the root of my SD card, and keep getting the following errors:
E footer is wrong
E signature verification failed
I've tried wiping the cache and renaming the .zip file as well - nothing has worked. Do I need to do a full reset along with wiping the cache?
Thanks.
Click to expand...
Click to collapse
Toggle signature check in twrp
ShinySide said:
Toggle signature check in twrp
Click to expand...
Click to collapse
That did it - thanks tons!
Camera does not work after flashing TrapKernel G6
Hi, I flashed TrapKernel G6 with the latest version of TWPR on my stock 5.1.1 Galaxy S5 (tmobile) and now the camera does not work. Does anyone have a solution for this?
Unblessed Be said:
Hi, I flashed TrapKernel G6 with the latest version of TWPR on my stock 5.1.1 Galaxy S5 (tmobile) and now the camera does not work. Does anyone have a solution for this?
Click to expand...
Click to collapse
Yeah use the correct version for your firmware. That's why there's 2 threads each with firmware version in the title
So I accidentally installed SU from TWRP, what should I do?, or am I ok and just continue installing it from the play store or TWRP? And also the private mode doesn't work anymore :/ should I restore from the backup I made in TWRP? and restart.
Hi, I recently flashed my phone and rooted it under the FOF6 kernel but now I'm getting a message to update to FOG6 and was wondering what are the steps do I need to take to do this? Would I just install the FOG6 update normally and then re-root my phone or is there a way to keep my phone rooted with the new update?
cyclotripz said:
Hi, I recently flashed my phone and rooted it under the FOF6 kernel but now I'm getting a message to update to FOG6 and was wondering what are the steps do I need to take to do this? Would I just install the FOG6 update normally and then re-root my phone or is there a way to keep my phone rooted with the new update?
Click to expand...
Click to collapse
Flash the firmware tar, re root with the G6 version
I followed the instructions on adroid.gs and got it working my question now is what is the difference between this FOG6 Root kernel and the HispAsian kernel?
Is there a root method for Fol1?
Sent from my SM-G530T using Tapatalk
Yes jaydonstewartjts, worked for me and others on G900T:
http://forum.xda-developers.com/tmobile-galaxy-s5/general/firmware-g900tuvs1fol1-t3290950
jaydonstewartjts said:
Is there a root method for Fol1?
Sent from my SM-G530T using Tapatalk
Click to expand...
Click to collapse
Yes: http://forum.xda-developers.com/tmo...l/root-how-to-root-sm-g900t-firmware-t3358190