Compatibility i9506 - Xposed Framework Modules

My profile underneath should provide information about my S4 current configuration.
I am not able to install Xposed. Is there a solution?
Thank you
S4 i9506 ks01ltexx - Knox Warranty Void: 0x1
Bootloader Version: I9506XXUDOC5
Baseband Version: I9506XXUDOC5
PDA Version: I9506XXUDOC5
CSC Version: I9506NEEDOC5
DeHAWK_NON-OC_V1. 53_Ensecured_kernel + TWRP Recovery

Related

[Q] SignDroid? M3 Media Box Board

Hello,
I have a device in which I am attempting to get root.
Settings -> About Device shows the following information
Model Number: M3 media box board
Android Version: 2.3.4
Uboot version: V1.3.6-13-g49463f7(20111102.110343)
Recovery version: V1.3.0-32-g20c526c(20111101.190701)
Kernel version: 2.6.34 V1.3.0-56-g08e726c-dirty(20111212.115459)
Build number: 20120111.163332
This device seems to be a clone of the ATV1000-ATV2000 from Geniatech
I have attempted to use z4root which did not work.
Any information on this device would be helpful.
Thanks!

[Q] Root S4 mini Dous I9192XXUAMH3

how can i root galaxy S4 Mini Dous
Model: GT-I9192
android v: 4.2.2
Baseband: I9192XXUAMH3
Kernel v: 3.4.0-947972
SELinux status: Permissive
Secure boot status: Samsung

[Q] Root: Samsung Galaxy Grand Prime SM-G530H

Model number: SM-G530H
Android version: 4.4.4
Baseband version: G530HXXU1ANJ3
Build number: KTU84P.G530HXXU1ANJ3

i9300 - No network, I have IMEI, no product code

Hi,
I lost my IMEI trying to upgrade from ROM 4.3 to 5.1 from ArchiDroid I lost my folder EFS too.
Well, I took my samsung galaxy s3 for service box, they have restored the original imei.
The smartphone it was working well for a while and suddenly the phone restart and show on notification bar the message
"NO SIM CARD"
I took my S3 again to service box, and they change "SIM CARD READER"
Works fine again, but suddenly the phone restart and show the error "no sim card", yes, again.
So, here I'm trying to repair this error:
I have several info, from Phone Info:
*General*
Manufacturer / Brand:
Samsung
Phone Model:
GT-i9300
Product Name:
m0xx
*CSC Code*
Product Code:
Not Active
Original CSC Code:
TFG
Firmware's CSC Code:
TFG
Active CSC Code:
TFG
Available CSC Codes:
Appears in blank
CSC Country:
OPEN / CL
Mobile Operator:
73402
*Firmware*
Bootloader Version:
I9300XXUGMK7
PDA Version:
I9300KTUKOA1
CSC Version:
I9300TFGKOA1
Baseband Version:
I9300UBUGNG1
Kernel Version:
3.0.101
[email protected] #1 32-bit
Java Virtual Machine:
Dalvik 1.6.0
*Android*
Root Existence:
Yes
Android Version:
4.4.4
Build Number:
MoRoROM 4.4.4(OA1) v3.1 AROMA (i9300KTUKOA1)
*Hardware*
Hardware / Board:
smdk4x12 [32-bit]
Platform / Chip:
exynos4 / exynos4412
GPU:
ARM Mali-400 MP
Modem Board:
Appears in blank
Hardware Revision:
REV_
Any solution or advice for this?
Thanks in advance!
P.S: I'm from Venezuela, my operator is Digitel.

Tab S3 will not boot after a factory reset

After a factory reset my tablet would not boot. At first it took me 4 days to power up the tablet. The tablet does not go further than the Recovery booting... then turns off. (Android Recovery does not boot & OS does not boot).
Things a have tried:
Power + Vol Down + Home for Download Mode
Flashed Firmware T820XXU2BRL1 - GALAXY TAB S3 SM-T820 XAR CELLULAR SOUTH - with Odin 3.13.3.
Version Android 8.0.0
Changelist 14977309
Build date Wed, 12 Dec 2018 04:35:32 +0000
Security Patch Level 2018-12-01
Product code XAR
PDA T820XXU2BRL1
CSC T820XAR2BRL1
After I flashed the firmware it still does not boot.
Any ideas???
Current Status:
Odin Mode ( High Speed)
Product Name: SM-T820
Current Binary: Samsung Official
System Status: Official
FRP Lock: Off
OEM Lock: On
DID: 03ea61650a86
Warranty Void: 0x0
Qualcomm Secureboot: Enable
RPSWREV: B2(1, 1, 1, 1, 1) K1 S1
Secure Download: Enable
CCIC: S2MM005 HW: 4 Boot: 6 Main: d5

Categories

Resources