Hi,
I lost my IMEI trying to upgrade from ROM 4.3 to 5.1 from ArchiDroid I lost my folder EFS too.
Well, I took my samsung galaxy s3 for service box, they have restored the original imei.
The smartphone it was working well for a while and suddenly the phone restart and show on notification bar the message
"NO SIM CARD"
I took my S3 again to service box, and they change "SIM CARD READER"
Works fine again, but suddenly the phone restart and show the error "no sim card", yes, again.
So, here I'm trying to repair this error:
I have several info, from Phone Info:
*General*
Manufacturer / Brand:
Samsung
Phone Model:
GT-i9300
Product Name:
m0xx
*CSC Code*
Product Code:
Not Active
Original CSC Code:
TFG
Firmware's CSC Code:
TFG
Active CSC Code:
TFG
Available CSC Codes:
Appears in blank
CSC Country:
OPEN / CL
Mobile Operator:
73402
*Firmware*
Bootloader Version:
I9300XXUGMK7
PDA Version:
I9300KTUKOA1
CSC Version:
I9300TFGKOA1
Baseband Version:
I9300UBUGNG1
Kernel Version:
3.0.101
[email protected] #1 32-bit
Java Virtual Machine:
Dalvik 1.6.0
*Android*
Root Existence:
Yes
Android Version:
4.4.4
Build Number:
MoRoROM 4.4.4(OA1) v3.1 AROMA (i9300KTUKOA1)
*Hardware*
Hardware / Board:
smdk4x12 [32-bit]
Platform / Chip:
exynos4 / exynos4412
GPU:
ARM Mali-400 MP
Modem Board:
Appears in blank
Hardware Revision:
REV_
Any solution or advice for this?
Thanks in advance!
P.S: I'm from Venezuela, my operator is Digitel.
Related
Hello everyone! (I'm Italian, sorry for my bad English)
So my problems are these:
Assuming I have a Chinese Smartphone (known as "Star i1900") I can't give it root permissions, I tried various methods including:
1. z4Root
2. GingerBreak
3. SuperOneClick (of this I have tried three different versions)
4. UniversalAndroot
5. UnlockRoot
6. A script with .bat extension found on this forum
None of it worked!
So first question: Is there a way to give permissions to Root this damn Chinese phone?
Second problem:
I want to change the Android version in this smartphone, currently there is a very slow 2.3.6 (made especially for him I guess, because it's a Dual Sim, TV etc.).
I mean, I understand that the phone has only one core 650 Mhz ... but I hope and believe that there is an Android version on which I run better.
Now I carry the information of the phone as they are written:
Model Number:
e1109_v73_jxlc1
Android Version:
2.3.6
Version banda base:
MAUI.11AMD.W11.37.SP.V17.F1, 03/14/2012 16:54
Kernel version:
2.6.35.7
Thu March 22 12:48:28 CST 2012
Build number:
ALPS.GB.FDD2.MP.V4.5
Custom Build Version:
1332391723
Well, since I do not think that this phone has Rom and everything else made especially for him, I arose a doubt:
Can I change the Android version through a Rom official or not but based on another phone with the same characteristics?
P.s. His CPU is a Qualcomm MTK MT6573 650MHz
Thank you for any replies,
Forgive my titanic problem ... You are my last hope
Sorry for the "up"
These are some information from Quadrant:
System
Version SDK: 2.3.6
ID: GRK39F
Name OS: Linux
Version OS: 2.6.35.7
Version Dalvik VM: 1.4.0
Device
Model: e1109_v73_jxlc1
Product: e1109_v73_jxlc1
Board: e1109_v73_jxlc1
Brand: yusu
CPU
Name: ARMv6-compatible processor rev 7 (v6l)
All frequency are indicated by a "?"
Cores: 1
Cores per Java: 1
Architecture: 6
Hope this is useful...
i have new s3 and show me this in EFS PRO and system status
Product Code: Not active
Hardware Version: REV___
Serial Number: 000000000
ERI Version: not available
this is normal? cell in backlabel dont have Imei Code only model ssn and ffc id
IMEI should be the same as label under the battery .
If not return to seller .
jje
I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
how to get in to developer mode
Got to setting > About phone: on the build number tap seven (7) times and you be in developer mode.
Jim
Ulmo said:
I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
Click to expand...
Click to collapse
Hello XDA guys,
Recently I have tried to reuse this phone for MVNO career.
But I cannot open APN editing screen. Does anyone have same issue?
[Settings] -> [Mobile networks] -> [Access Point Names]
It just returns to the first [Settings] screen. Why?
[About phone] info shows this;
Model number: Z812
Android version: 5.1
Baseband version: Z812H01
Kernel version: 3.10.49-gb65561b [email protected]
Build number: Z812V1.0.0B22
Hardware Version: wuzA
Thanks.
Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
PDA version: G570FXXU1APL4
CSC version: G570FODD1APK2
Phone version: G570FXXU1APJ3
Product code:
CSC country code: India
CSC sales code: INS
Phone SN:
IMEI: 000000000000000
HW version:
RF cal date:
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-12-01
Boot Warranty bit: 1
Checking Super user right... true
Writing NV Data... OK
Recalculating MD5... OK
Deleting backup... OK
Write NV Data done
Done with Samsung Tool PRO v.32.4
when write cert .......
Operation: Write CERT
Selected model: SM-G570F
Software version: 32.4
Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
PDA version: G570FXXU1APL4
CSC version: G570FODD1APK2
Phone version: G570FXXU1APJ3
Product code:
CSC country code: India
CSC sales code: INS
Phone SN:
IMEI: 000000000000000
HW version:
RF cal date:
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-12-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Modem board: SHANNON305
HWID: 48 1B A9 10 1D 21 98 9B 55 4F B8 AF 0A 00 00 00
Calculating... error
Security damaged (hmac mismatch)
Done with Samsung Tool PRO v.32.4
i have same problem any 1 help pliz