I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
how to get in to developer mode
Got to setting > About phone: on the build number tap seven (7) times and you be in developer mode.
Jim
Ulmo said:
I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
Click to expand...
Click to collapse
Related
Hello everyone! (I'm Italian, sorry for my bad English)
So my problems are these:
Assuming I have a Chinese Smartphone (known as "Star i1900") I can't give it root permissions, I tried various methods including:
1. z4Root
2. GingerBreak
3. SuperOneClick (of this I have tried three different versions)
4. UniversalAndroot
5. UnlockRoot
6. A script with .bat extension found on this forum
None of it worked!
So first question: Is there a way to give permissions to Root this damn Chinese phone?
Second problem:
I want to change the Android version in this smartphone, currently there is a very slow 2.3.6 (made especially for him I guess, because it's a Dual Sim, TV etc.).
I mean, I understand that the phone has only one core 650 Mhz ... but I hope and believe that there is an Android version on which I run better.
Now I carry the information of the phone as they are written:
Model Number:
e1109_v73_jxlc1
Android Version:
2.3.6
Version banda base:
MAUI.11AMD.W11.37.SP.V17.F1, 03/14/2012 16:54
Kernel version:
2.6.35.7
Thu March 22 12:48:28 CST 2012
Build number:
ALPS.GB.FDD2.MP.V4.5
Custom Build Version:
1332391723
Well, since I do not think that this phone has Rom and everything else made especially for him, I arose a doubt:
Can I change the Android version through a Rom official or not but based on another phone with the same characteristics?
P.s. His CPU is a Qualcomm MTK MT6573 650MHz
Thank you for any replies,
Forgive my titanic problem ... You are my last hope
Sorry for the "up"
These are some information from Quadrant:
System
Version SDK: 2.3.6
ID: GRK39F
Name OS: Linux
Version OS: 2.6.35.7
Version Dalvik VM: 1.4.0
Device
Model: e1109_v73_jxlc1
Product: e1109_v73_jxlc1
Board: e1109_v73_jxlc1
Brand: yusu
CPU
Name: ARMv6-compatible processor rev 7 (v6l)
All frequency are indicated by a "?"
Cores: 1
Cores per Java: 1
Architecture: 6
Hope this is useful...
Hello all!
I was surfing the internet for 100's of hours just to find some mod and rom for my china Mid tablet.
There is no brand name written on the TAB, So I used Android system info app to find some specification about this tablet!
Now, let's go to the real matter......
Before buying this tab I used more than 3-4 android devices and helped so many people to modify there phones. So, I know a little bit about android modding! But this is not gonna help me to create a whole new custom rom for my Generic MID Tablet. So I need your help,
First I am gonna give you some specification about my Tbalet....
Android Version: 4.0.4 (Icecream Sandwich)
Release Codename: REL
API LEVEL: 15
CPU ABI: armeabi-v7a
Bootloader: Unknown
Manufacturer: Unknown
CPU ABI2: armeabi
Hardware: Sun4i (That means Allwinner a10 I hope)
Radio: Unknown
Board: Crane
Brand: hn
Device: crane-hn
Display: crane_hn-eng 4.0.4 IMM76D 20121112 dev-keys
Host: ubuntu
ID: IMM76D
Model: MID-CH719H
Product: crane_hn
Total RAM: 1GB
Processor: ARMv7 Processor rev 2(v71)
Screen Resolution: 1024 * 552
Refresh rate: 59.396
Now, There is some other information I should provide.....
I rooted my device after taking a lot of surfing on the internet.
I also installed CWM Recovery
But i can't get into the recovery mode by restarting by pressing various keys.
The only way i get into the recovery mode by writing "echo -e 'boot-recovery\0' > /dev/block/nandf; sync" into the terminal emulator and reboot after that.
Now, What I want to do.....
1. I want to change all the "unknown" parts of the specification to show something...(Not mandatory)
2. Modify the kernel for adding few tweaks as overclocking, adding governors etc.
3. Find out is there any way to install 4.1.1 or 4.1.2 to this device
etc.......
Now I would be pleased if u guys give me some suggestion where to start...
I took a nandroid backup. but trying a lot of methods I couldn't make a copy of the kernel..
I found a boot.img file inside of the nandroid backup, is this the stock kernel of my device. it's 30mb file
Hey guys, not sure where to add this.
I have a generic Chinese 9.7inch tab, that looks almost identical to a Ipad1.
It is very similar to this: Enjoy Tab T91
Although its on Andorid 3 i think.
I am wanting to install Cyanogenmod, or android 4.
Any idea how i will find the correct Rooting and rom?
Update with info about the tab:
-= Quadrant =-
SDK Version: 3.2.1
ID: HTK75
OS Name: Linux
OS Version: 2.6.36.3-00003-g8038d35
Delvik VM Version: 1.5.1
Device
Model: EnjoyPad-T91
Product:
Board:
Brand: nvidia
Fingerprint: nvidia/EnjoyPadT91/T91:3.2.1/HTK75/T91-20111111:user/release-keys
CPU
Name: ARMv7 Processor rev 0 (v71)
Cires: 2
Architecture: 7
Hardware: Bentana
Revision: 0
Serial #: 00000000000000
Memory:
Total: 841608 kb
Free: 72556 kb
Inactive: 137096 kb
Display
Resolution: 768x976
DPI: 160x160
GPU (Open GL)
Vendor: NVIDIA Corporation
Renderer: NVIDIA AP
Version: OpenGL ES 2.0
Hey, after many failed searched i finally found the answer... in Russian on this forum: http://4pda.ru/forum/index.php?showtopic=323728
Anyways, i downloaded the USB driver and the update file.
Read through some terrible instructions and Voila.. now on 4.0.3.
Is there any where i can upload this .rar file with all the nessasary files and instructions.
New details
Model Number
Ventana
Android Version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Also a bonus, on the Quadrant Standard test it now rates a device higher lol
Hi, I have a chinese smartphone CCIT CB-Z2(Moborobo said Z2), but it's blocked to the screen of google account, my wifi is not enable, and I never connect my phone to gmail.
Power + Volum Down = SpreadTrum test, Power + Volum Up = White Triangle with Yellow Exclamation. I need to do a factory hard reset, or how to do it, with a software etc(tuto, step by step).
I'm from Cote d'Ivoire, I need your help brothers, please help me!!
I send some pictures.
(SpreadTrum Test Info)
android 4.2.2
sprdroid_base-user 4.2.2 Mocordroid2.3.5 W12.20_P20.01 test keys
Platform Version: MOCOR_880XG_MODEM_W12.43_P1_Debug.Project Version:
sc6820_modem.BASE Version: DM_BASE_12A_W12.43.HW Version:
sc6820_modem.11-02-2012 17:53:08
(Moborobo Info)
Model: Z2
Battery: 35%
Firmware version: 4.2.2
Wi-Fi: Off
Status: UNROOT
Resolution: 480*800
Manufacturer: Unknown
Serial: 19761202
IMEI: 865238011583580
IMSI: Unknown
MAC: Unknown
Android Version: 4.2.2
Baseband version: DM_BASE_12A_W12.43|sc6820_modem|11-02-2012 17:53:08
Kernel version: sprdroid_base-user 4.2.2 MocorDroid2.3.5 W12.20_P20.01 test-keys
Thank you
Connect device to PC via ADB and from terminal run
adb devices
Then
adb reboot recovery
From recovery make factory reset ....
This works if your device is connected to adb (enabled)before it get locked else you will be not enable to grant adb acesss due to lock
Press Thanks Button If You like My Work & Posts?
hello, thank you for your spontaneity, I saw your post, but I was looking for but how to apply what you said. Now I could do it but it takes me back to the screen white triangle with yellow exclamation.
i used the following programs its giving me rooted at the end but when i checked them by root check program giving me message not rooted
RKBatchTool 1.7
Root_RK29_Tab_Toolkit_1.3
EasyRootTool v12.4
SuperOneClickv2.3.3
DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su
RootGenius_en.exe
this root tool-Setup
device details
Manufacturer: rockchip
Model: KT003W
Android Version: 4.2.2
Build ID: KT003W-4.2.2 JRO03H 20140222
Board ID: rk2928sdk
Chipset Platform: rk2928