Hi,
I lost my IMEI trying to upgrade from ROM 4.3 to 5.1 from ArchiDroid I lost my folder EFS too.
Well, I took my samsung galaxy s3 for service box, they have restored the original imei.
The smartphone it was working well for a while and suddenly the phone restart and show on notification bar the message
"NO SIM CARD"
I took my S3 again to service box, and they change "SIM CARD READER"
Works fine again, but suddenly the phone restart and show the error "no sim card", yes, again.
So, here I'm trying to repair this error:
I have several info, from Phone Info:
*General*
Manufacturer / Brand:
Samsung
Phone Model:
GT-i9300
Product Name:
m0xx
*CSC Code*
Product Code:
Not Active
Original CSC Code:
TFG
Firmware's CSC Code:
TFG
Active CSC Code:
TFG
Available CSC Codes:
Appears in blank
CSC Country:
OPEN / CL
Mobile Operator:
73402
*Firmware*
Bootloader Version:
I9300XXUGMK7
PDA Version:
I9300KTUKOA1
CSC Version:
I9300TFGKOA1
Baseband Version:
I9300UBUGNG1
Kernel Version:
3.0.101
[email protected] #1 32-bit
Java Virtual Machine:
Dalvik 1.6.0
*Android*
Root Existence:
Yes
Android Version:
4.4.4
Build Number:
MoRoROM 4.4.4(OA1) v3.1 AROMA (i9300KTUKOA1)
*Hardware*
Hardware / Board:
smdk4x12 [32-bit]
Platform / Chip:
exynos4 / exynos4412
GPU:
ARM Mali-400 MP
Modem Board:
Appears in blank
Hardware Revision:
REV_
Any solution or advice for this?
Thanks in advance!
P.S: I'm from Venezuela, my operator is Digitel.
I need help, please.
I'm having problems on my s6 edge G925i
I can not fix it.
Plataforma: Samsung Android
Porto seleccionado: COM39
Modelo seleccionado: SM-G925I
Reading info, please wait...
Modelo do telefone detectado: SM-G925I
Data de criação do firmware: Fri Mar 11 20:26:54 KST 2016
PDA version: G925IDVU3EPC6
CSC version: G925IZTO3EPCB
Versão do SW: unknown
Phone SN: RF1D45EJGGR
Android version: 6.0.1 (MMB29K)
Sales code: ZTO
Country: Brazil
HW platform: exynos5
HW Chip: exynos7420
HW Modem: unknown
Security patch level: 2016-03-01
Codename: zeroltedv
Performed by 2.4.9 Software version.
screen shot
https : // drive.google.com/open?id=0B9R6Cc41VuMcb3liN1hOOE9IakU
https : // drive.google.com/open?id=0B9R6Cc41VuMcdFlRdG05ZUhnYWc
All the reviews I have read about the M6 Note seem to say that it has built in root access, well mine does not have this feature. I have not found any reason as 2 why this is missing. This is not carrier branded with Mobile Provider patches or apps pre-installed. Any help would be appreciated. Here is my device info.
Product Name: M6 Note
Model: M721L
Serial Number: 721`LECS5224ZY
MEID: 990-01075004021
IMEI1: 866543030089421
IMEI2: 8665430300890439
Android Version: 7.1.2
Android Security Patch: 1 November 2017
Build Number Flyme 6.1`.4.1G
Baseband Version: 953_GEN_PACK-1.117478.1.119723.2
try that https://youtu.be/Bh6_KxQZx9Q :]
Hello There ..
I am facing an issue with Whatsapp, that it Freezes in Background, I messaged someone, but it not sent from my side instantly, its sent delayed.. Also if i delete a message, ots not deleted instantly, but deletes after few minutes ..
Please go thru ScreenCast Video - (https://youtu.be/bEE6yOtH2hE)..
Phone Log is below..
Its very irritating.. Please Help..
Awaiting..
Rajat Jain
[email protected]
--Support Info--
Debug info: +919897243000
Description: 2.19.63
Version: 2.19.63
App: com.whatsapp.w4b
LC: US
LG: en
Context: settings/about
Carrier: airtel
Manufacturer: OPPO
Model: RMX1807
CPU ABI: arm64-v8a
OS: 9
Socket Conn: UP
Radio MCC-MNC: 404-97
SIM MCC-MNC: 404-97
Free Space Built-In: 41113198592 (41.11 GB)
Free Space Removable: 40903483392 (40.90 GB)
FAQ Results Returned: 10
FAQ Results Read: 0
Smb count: 311
Ent count: 5
Away state: 0
Away start time: 0
Away end time: 0
Greeting message on: true
CCode: 91 9897243000
Target: release
Product: RMX1807
Device: RMX1807
Build: RMX1807EX_11_A.21
Board: sdm660
Kernel: Unknown release unknown version
Connection: M.O.B.I.L.E. (L.T.E.)
Device ISO8601: 2019-07-23 07:28:35.408+0530
Phone Type: G.S.M.
Network Type: L.T.E.
Missing Permissions: android.permission.INSTALL_SHORTCUT, android.permission.READ_PHONE_STATE, android.permission.REQUEST_INSTALL_PACKAGES, com.sec.android.provider.badge.permission.READ, com.sec.android.provider.badge.permission.WRITE, com.htc.launcher.permission.READ_SETTINGS, com.htc.launcher.permission.UPDATE_SHORTCUT, com.sonyericsson.home.permission.BROADCAST_BADGE, com.sonymobile.home.permission.PROVIDER_INSERT_BADGE, com.huawei.android.launcher.permission.READ_SETTINGS, com.huawei.android.launcher.permission.WRITE_SETTINGS, com.huawei.android.launcher.permission.CHANGE_BADGE
Architecture: aarch64
Diagnostic Codes: TK-NS-2 FE-GDE FE-GDC FE-VIDC FE-SMSRTV
Network metered: 389:false;395:true
Network restricted: 389:true;395:false
Data roaming: false
Tel roaming: false
ref: 30200381066
Video transcode: supported
Datacenter: vll
Screen reader: false
Code:
To XDA moderators : There's no sub-forum for these 4 models.
Nokia C2 Tava, Tennen and 2 V Tella are basically same device. Please move this topic when available, thanks.
Hi all,
Recently I got Nokia C2 Tennen and C5 Endi bootloader unlocked again.
If you guess I achieved that by utilizing prototype firmware, then you're right.
However I don't have other retail device to test, anybody would like to give it a try?
I would be definitely interested to try it out. I have a c5 needing bootloader unlock
Legendanubis said:
I would be definitely interested to try it out. I have a c5 needing bootloader unlock
Click to expand...
Click to collapse
Alright.
May I know if you're familiar with operating SP flash tool?
i wouldl love to try it. I have got a locked c2 tava that i am unable to factory reset. A friend brought the phone to me to FRP bypass (bought it cheap from someone that said it just needed to be charged, gave a false pin and here we are) That was a month ago. Im very new to all of this and while ive been studying bootloaders and root i havnt actually had the pleasure. Any advice is welcome on this TA-1218. I cannot find ANYTHING on the EXACT model. All help is appreciated. Thanks
jh
hikari_calyx said:
Alright.
May I know if you're familiar with operating SP flash tool?
Click to expand...
Click to collapse
I am not familiar with it, I currently use bugjaeger to flash my phone's. But would love to get this c5's bootloader unlocked so if I can't use my program to flash I would definitely learn the sp flash tool
Bootloader unlock done with Hydra Tools. Also put a work root and magisk root on as well.
Hydra MediaTeK Tool Ver 1.0.3 Build 77
Windows 10 (Version 10.0, Build 19042, 64-bit Edition)
Intel(R)Core(TM) i5-2410M CPU @ 2.30GHz
Intel(R) HD Graphics 3000
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.20
Serial : [removed]
Initialize : OKAY
Status : Activated
Life : [removed]
=====================================
Searching for MTK Device... Found
Port Identification : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM10)
Device : 6&13d9c38d&0&3
SymbolicName :\\??\\USB#VID_0E8D&PID_0003#6&13d9c38d&0&3#\[removed]
Driver Ver : 01/22/2015,3.0.1504.0
Opened handle..
Handshaking... Ok
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0717 MT6761 [6761]
hw subcode : 8A00
hw version : CA01
sw version : 0200
Target config : E3
SBC : 01 (True)
SLA : 02 (True)
DAA : 00 (False)
SWJTAG : 02 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Exploiting Device...
Exploit Sent..
Successfully Exploited...
Handshaking... Ok
\\HydraTool_FullPackage_08-01-2021\backup\\Preloader_dump\\prel.tmp
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0717 MT6761 [6761]
hw subcode : 8A00
hw version : CA01
sw version : 0200
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
MEID : [removed]
Stage 1.. [Size:232216]
Sending : Please wait.. Accepted
Identifying Protocol...
Protocol : New
Synchronization... [ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Preloader Initialization...
Parsing prel.tmp
Init : Accepted
Executing : SYNC
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : [removed]
ERAM Size : 0x0000000000039000 -228 KB
IRAM Size : 0x0000000080000000 -2 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : [removed] - QD63MB
Executing : ACCEPTED...
Reading GPT0 -EMMC [0x00008000] 0 130 Items
0
Autobackup Partitions
-preloader [0x00000000] 512 KB -> preloader.bin...1 Ok0
-> Renaming Preloader.... preloader_armstrong.bin0
Creating Scatter file... \\HydraTool_FullPackage_08-01-2021\\\backup\\Auto\\0717__111921012459\\MT6761_Android_scatter.txt
-pgpt [0x00000000] 8 MB -> pgpt.bin...1 Ok
-frp [0x02D80000] 1024 KB -> frp.bin...1 Ok
-nvdata [0x04E80000] 64 MB -> nvdata.bin...1 Ok
-protect1 [0x0C51A000] 8 MB -> protect1.bin...1 Ok
-protect2 [0x0CD1A000] 10.898 MB -> protect2.bin...1 Ok
-persist [0x0E000000] 48 MB -> persist.bin...1 Ok
-nvram [0x1A900000] 64 MB -> nvram.bin...1 Ok
Done!!!0
\\HydraTool_FullPackage_08-01-2021\\\backup\\Auto\\0717__111921012459
MTK Phone Loader is NOW RUNNING.
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 2 [removed]
ERAM Size : 2 0x0000000000039000 -228 KB
IRAM Size : 2 0x0000000080000000 -2 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : [removed] - QD63MB
Reading GPT0 -EMMC [0x00008000] 0 130 Items
-------------------------------------
Operation : Unlock Bootloader
Processing...
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Verifying status after operation...
-------------------------------
Bootloader Status...
Bootloader : Unlocked
-------------------------------
Action Result : 0 Ok
Elapsed Time : 00:01:04
(its been a while. i know)
i successfully got my c2 tennen (ta-1218) bootloader unlocked and rooted.
im still running on stock tho.
plus no custom recoveries yet.
Quartzbreaker said:
i wouldl love to try it. I have got a locked c2 tava that i am unable to factory reset. A friend brought the phone to me to FRP bypass (bought it cheap from someone that said it just needed to be charged, gave a false pin and here we are) That was a month ago. Im very new to all of this and while ive been studying bootloaders and root i havnt actually had the pleasure. Any advice is welcome on this TA-1218. I cannot find ANYTHING on the EXACT model. All help is appreciated. Thanks
Click to expand...
Click to collapse
Have you ever found a solution to your problem? Im having same issue and cant seem to find a fix for it.
This may mot be the correct thread and if so please accept my apology but I'm trying to unlock the bootloader for a Moto g pure and neither Motorola or at&t will give the bootloader codes. I saw reference here to sp flash tool and wondered if someone could help me utilizing that. I do not have a desktop or laptop and all I have to work with is mobile. Mtkclient won't run because I can't get PySides6 dependencies to install in Termux. I was able to install NetHunter , the one for no rooted devices, but so far I can't find a way to force flash
hikari_calyx said:
Code:
To XDA moderators : There's no sub-forum for these 4 models.
Nokia C2 Tava, Tennen and 2 V Tella are basically same device. Please move this topic when available, thanks.
Hi all,
Recently I got Nokia C2 Tennen and C5 Endi bootloader unlocked again.
If you guess I achieved that by utilizing prototype firmware, then you're right.
However I don't have other retail device to test, anybody would like to give it a try?
Click to expand...
Click to collapse
SUCCESS! [BOOTLOADER UNLOCK] Nokia C2 Tava TA-1218.
[BOOTLOADER UNLOCK] Nokia C2 Tava TA-1218. I was actually approached by a person from XDA named @Soadeathdealer who gave me remote access to unlock his phone's bootloader. This phone bootloader was successfully unlocked using Unlock Tool which...
forum.xda-developers.com
cagedbadger said:
This may mot be the correct thread and if so please accept my apology but I'm trying to unlock the bootloader for a Moto g pure and neither Motorola or at&t will give the bootloader codes. I saw reference here to sp flash tool and wondered if someone could help me utilizing that. I do not have a desktop or laptop and all I have to work with is mobile. Mtkclient won't run because I can't get PySides6 dependencies to install in Termux. I was able to install NetHunter , the one for no rooted devices, but so far I can't find a way to force flash
Click to expand...
Click to collapse
I don't think the moto g pure has been unlocked yet. At least boost variant.