Related
Hello again,
I need your help again and I decided to ask you before I am screwing up my phone again.
I want to install the clockworkmod custom recovery on my phone, but unfortunately I just can not figure out how to install a generic version.
What I did so far:
1.) I installed a custom ROM by simply downloading the coresponding file from needrom... This ROM already contains the superuser settings so this is done
2.) I read a lot about the bootloader, which has to be unloocked at the Lenovo S90... I found a file, which is apparently doing this job... Its a ZIP file called "S90-CN_UnLock_BootLoader.7z" this file contains 6 files: (I) emmc_appsboot.mbn (II) gpt_backup0.bin (III) gpt_main0.bin (IV) patch0.xml (V) prog_emmc_firehose_8916.mbn (VI) rawprogram0.xml
Next I flashed them via the tool QFIL on the phone... Phone restarted and all good
3.) And thats where I get stuck... According to the thread I was following so far for a successful installation of the TWRP recovery I just needed to download the file " TWRP-2.8.6.0_S90.7z" and start the file called "Flash-TWRP_S90.bat"
However, a custom recovery should always start from the beginning, when I keep the up volume button and the power button at once pressed... However, with this it is not working + I would really prefer the clockworkmod as it was nice on my old Samsung.
the "how to" which I followed is coming from "ainotech.com/how-to-flash-lenovo-s90-sisley-root-and-custom-firmware/" just without the "
Thanks
P.S.: The phone is a Lenovo S90-U 2GB
There is something I want to add...
After following the steps of this website, which state above, I installed the custome recovery... Well at least I think so...
If I open the app: "Mobileuncle Tools" there is this option shich states: "Into Recovery Mode"
When I click this button, my phone shuts down and starts in the TWRP recovery. However, I can not access this mode in the convencional way, meaning: 1. Switch phone off 2. Volume up button + Power button...
If I do this or any other combination I do not get into this recovery mode anymore only through the Mobileuncle Tool...
(If I push Volume down + Power I go into flash memory)
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
DO THIS AT YOUR OWN RISK!!!!!
I AM NOT RESPONSIBLE FOR ANY ERROR OCCURS DURING THIS!!!!
PLEASE FOLLOW THE GUIDE STEP BY STEP TO DON'T FACE ANY DAMAGES/ERRORS.
First of all, You must confirm that your device model is J200G.
Otherwise it may damage your device!!!
I am not responsible for that.
That is, this guide is for J200G only.
Next, Check your firware model.
The model of your firmware must be : J200GDDU1APB1/J200G1APB2
Because the latest firmwares does not have any propper guides to root.
If it is yes ,then follow my commands otherwise you must downgrade your firmare by downloading firmware : J200GDDU1APB1 and flshing with odin tool(Downgrading the firmware doesn't change any type of settings in device).
Step 1 : Download the latest version of TWRP recovery .tar file for Galaxy J2 from the link.
Step 2 : You must unlock your bootloader.To do this , go to "Settings/About device" and tap "build number" 7 to 8 times . (It says "you are now a developer") and go back .And then, you see an extra option named as "Deveoper options" in settings, click on it and turn on "OEM Unlock" . This will unlock your bootloader (Unlocking bootloader will void your warrenty).
Step 3 : Switch off your mobile and boot into odin mode. To do this, switch off your device and press and hold the volume down+power+home buttons at same time. The device then displays the odin mode (Note that the FRP Lock is off otherwise it will lock custom binary).
Step 4 : Download and install the "samsung drivers" from link, and download and install the latest version of "odin" from the link on your computer and open it. And then select PDA/AP and locate the downloaded twrp_3.0.7_j2lte.tar file and select it. Now, connect the device with computer using data cable.
Step 5 : After connecting the device, note that the odin shows the "added" message. Then select "start" button and sit back and relax. It will show you the "pass" message and your device will restart automatically.
Step 6 : After this, download "superSU experimental.zip" from the link. And move it to root of your sdcard.
Step 7 : To see your new custom recovery , boot into recovery mode by pressing and holding the volume up+power+home buttons and then you see the TWRP logo and it will turn you to the home page of the recovery. Select the "install" option and locate the "supersu v2.60 experimental.zip" file and select it and flash it by swiping right from the left and the recovery shows the message "successfull". Then select "reboot" and then select "system" to reboot the device. Wait for the device to reboot and switch off and again it reboots automatically. Then, you see the "superSU" app installed on your device. Downoad "Root Checker" app from playstore for propper root verification. (During the boot, you see "kernel is not seandroid enforsing" message; don't worry, it doesn't affects on device.) Now, you have successfully installed TWRP Recovery and Rooted your Galaxy J200G.
KEEP SMILING!!!!
Link for Firmware(for those who's firmware is latest ones for downgrading): Goto boycracked.com/2016/03/31/officialsamsung-galaxy-j2-sm-j200g-stock-rom/ and download.
NOTE : YOU MUST SELECT FIRWARE : J200GDDU1APB1.
Link for Odin : Goto drive.google.com/file/d/0B-cLs7AIeb37ZWxSMl9EaGQ0Ukk/view and download.
Link for TWRP Recovery: Goto dl.twrp.me/j2lte/twrp-3.0.2-0-j2lte.img.tar.html and download.
Link for SuperSU : Goto download.chainfire.eu/745/SuperSU/BETA-SuperSU-v2.60-20151205163135.zip and download.
Link for Samsung driver for J200G : Goto www56.zippyshare.com/v/plQkPh9p/file.html and download.
device j2 does not show twrp recovery , then what i do
Hi there does enabling oem unlock in the developer option unlock bootloader...is there qny step after that...like going to download mode and long pressing volume button etc.....like other samsung phones...please tell....
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
You will need some files:
Opt verity Encrypt - http://download.highonandroid.com/file/Tools/Root/Samsung/no-verity-opt-encrypt-6.0-star.zip
RMM State Bypass Mesa - http://download.highonandroid.com/file/Tools/Root/Samsung/RMM-State_Bypass_Mesa.zip
Magisk 19.1 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/magisk-release.zip
Magisk Manager 7.1.2 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/app-release.apk
(Optional)(For Pie) Helios Pie Kernel - https://androidfilehost.com/?fid=1395089523397966358
(Optional)(For Oreo) Helios Pro Kernel - https://androidfilehost.com/?fid=1395089523397913077
(Optional) Promotheus One UI (Pie ROM) -https://androidfilehost.com/?fid=1395089523397940329
(Optional) Promotheus Lite (Oreo ROM) -https://androidfilehost.com/?fid=1395089523397887684
TWRP 3.3.0-0 - https://github.com/ananjaser1211/an...3.3_J7Y17LTE/TWRP-3.3.0-j7y17lte-20190417.tar
Odin - https://odindownload.com/download/Odin3_v3.13.1.zip
Stock ROM (In case of Soft bricking you can save your device) - https://s3.wasabisys.com/updatofw/GALAXYJ5/SM-J530F/BTU/SM-J530F_1_20190405203714_44wceovclw_fac.zip
Samsung USB Drivers - https://developer.samsung.com/common/download/check.do?actId=698
Copy the No Verity OPT Encrypt file,RMM State Bypass,What kernel u need,The rom u need,Magisk and Magisk Manager APK to ur SD Card.
Enable Developer options(Go into About phone,Software information,Tap several times on Build number until it says you are a developer.
Then go to Settings > Developer options > Check Oem UNLOCK and USB Debugging.
If you broke your device go to last lines(down)
If you already downloaded the files lets begin!
1.Turn off your phone and boot into download mode (Hold Volume Down,Home and Power and them press Volume UP)
2.Install Samsung USB DRIVERS on PC
3.Connect your Phone to your PC by USB Cable.
4.Open odin and load the twrp tar in AP slot.
5.Go to options and uncheck Auto Reboot
6.Click start
7.When in ODIN it shows PASS,Hold Volume Up,Home and power until the screen turns black then immiediately release and Hold Volume UP,Home and Power until the TWRP Screen Appears.
8.Tap on Keep Read Only and then Wipe and Format Data.Type "yes" without ".
9.Tap on Reboot and then Recovery
10.Tap on install then on Select Storage And Micro SDCard.
11.Press on No verity Opt Encrypt and swipe.
12.Press back button and Install RMM State Bypass Mesa.
13.Press back button and Install Magisk.
14.Tap on Wipe Cache and Dalvik and Then Swipe
15.Press the middle button(Home) and Tap on Reboot and then System.
16.Wait for the phone to boot and configure it.
17.Enable Developer options again and enable OEM Unlock and USB Debugging.
18.Disconnect Your Phone from the PC.
If you just wanted Root, You are Done.
Install Helios Pro Kernel to Stock ROM -
1.Go into recovery
2.Install > Select Storage > Helios Pro Kernel file
3.Swipe
4.Wipe Cache and Dalvik and Reboot to System.
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
Install Custom Rom -
1.Boot Into TWRP (When powered OFF Hold Volume UP,Home and Power)
2.Go to Wipe and Select System,Data,Cache,Internal Storage and swipe.
3.Then click on Wipe and Format Data. (Recommended)
4.Go to Install and select what ROM you want to Install:
-Promotheus One UI (Pie ROM)
-Promotheus Lite (OREO ROM)
Click on First "Click to show content" for Promotheus One UI
Click on Second "Click to show content" Promotheus Lite
1.In Aroma Installer Click next and agree to the terms and conditions
2.Then click Full Wipe.
3.Select What Mods you want
4.Select what BloatWare you want.
5.Click Install.
6.After its done Reboot.
7.After ~15 seconds of the Samsung Logo Hold Volume Down,Home and Power then release when the screen turns black.
8.After it boots it will be laggy.Complete the setup and connect to Google and Samsung Account and update everything first ftom Galaxy Store then from Play store.Then reboot and it will not be laggy.
9.You will see that you dont have root, to fix this Reboot into Recovery (You know the procedure) and go to Install > Select Storage > MicroSD Card > HeliosPie Kernel 3.1 and swipe.
10.Wipe Cache and Dalvik and reboot.
11.After it boots you will have Root and a Pie Custom Rom!
12.If you do not pass Safety Net,Go to Magisk > Modules > And disable BusyBox for Android NDK.
You are Done! Now install your favorite apps!
1.Boot into Recovery
2.Install > Promotheus Lite A8+
3.In Arome click Next and Agree to the Terms and Conditions.
4.Select your Mods
5.Select your BloatWare
6.Tap on Install and Reboot to System.
7.After ~15 seconds of The Samsung LOGO and then Hold Volume Down,Home and Power and Release when the screen turns black.
8.After the phone boots it will be very laggy.Complete the setup and connect to Google and Samsung Account and update everything From Galaxy Store and Play Store.
9.You will see you dont have root.Boot into Recovery and Tap on Install > Select Storage > Micro SDCard > Helios Pro Kernel.
10.Reboot to System.
11.You are done
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
If you Soft Brickes your device, open odin. Hold Volume Down,Home and Power until you are in download mode.
In odin select BL in BL box
AP in AP box
CP in CP box
CSC in CSC box (Important select CSC not Home_CSC)
Click Start and wait.
Your device will boot.
Finish the setup and enable developer option blah blah blah (Try Again)
If you dont see Oem unlock,You need to wait 7 days.
So thats it! If you have any problem reply!
victorAndrie said:
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
Click to expand...
Click to collapse
Samsung website on the j5 pro. Notice the model number
https://www.samsung.com/au/smartphones/galaxy-j5-pro-j530y/SM-J530YZKEXSA/
Gsm arena page on j5 (2017). Notice the model number.
https://www.google.com/amp/s/m.gsmarena.com/samsung_galaxy_j5_(2017)-ampp-8705.php
That info was readily available to anyone for about 2 yrs Also, you guys on the j5 2017 already have guides to do what you created a thread to do?
https://forum.xda-developers.com/galaxy-j5/how-to/samsung-j5-2017-sm-j530f-root-oreo-8-1-t3911794
palmbeach05 said:
Samsung website on the j5 pro. Notice the model number
https://www.samsung.com/au/smartphones/galaxy-j5-pro-j530y/SM-J530YZKEXSA/
Gsm arena page on j5 (2017). Notice the model number.
https://www.google.com/amp/s/m.gsmarena.com/samsung_galaxy_j5_(2017)-ampp-8705.php
That info was readily available to anyone for about 2 yrs Also, you guys on the j5 2017 already have guides to do what you created a thread to do?
https://forum.xda-developers.com/galaxy-j5/how-to/samsung-j5-2017-sm-j530f-root-oreo-8-1-t3911794
Click to expand...
Click to collapse
That is only root.
victorAndrie said:
That is only root.
Click to expand...
Click to collapse
Straight from post #1 of that thread. Notice the starred parts below.
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
***************************************************
*************TWRP
*******************************
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
**************************************************
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
***************************************************
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
***************************************************
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
palmbeach05 said:
Straight from post #1 of that thread. Notice the starred parts below.
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
***************************************************
*************TWRP
*******************************
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
**************************************************
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
***************************************************
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
***************************************************
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Click to expand...
Click to collapse
Hi,I see you forgot to install no verity encrypt,rmm state bypass. I would not recommend this method in any way to beginners(coming from an intermediarre or how that word is i am not native english) because you will then have RMM prenormal and you cant remove encryption ( most magisk modules dont work)
j5
hello, please i need any md5 rom for j5 because i have a problem on my system everything has stopped and my power button not working i cant delete wipe and cache and when i download twrp from odin to my phone its fail and its blocked by frp please im really need help
Does not remove the DM-verity problem
ExtremeGrief said:
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
You will need some files:
Opt verity Encrypt - http://download.highonandroid.com/file/Tools/Root/Samsung/no-verity-opt-encrypt-6.0-star.zip
RMM State Bypass Mesa - http://download.highonandroid.com/file/Tools/Root/Samsung/RMM-State_Bypass_Mesa.zip
Magisk 19.1 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/magisk-release.zip
Magisk Manager 7.1.2 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/app-release.apk
(Optional)(For Pie) Helios Pie Kernel - https://androidfilehost.com/?fid=1395089523397966358
(Optional)(For Oreo) Helios Pro Kernel - https://androidfilehost.com/?fid=1395089523397913077
(Optional) Promotheus One UI (Pie ROM) -https://androidfilehost.com/?fid=1395089523397940329
(Optional) Promotheus Lite (Oreo ROM) -https://androidfilehost.com/?fid=1395089523397887684
TWRP 3.3.0-0 - https://github.com/ananjaser1211/an...3.3_J7Y17LTE/TWRP-3.3.0-j7y17lte-20190417.tar
Odin - https://odindownload.com/download/Odin3_v3.13.1.zip
Stock ROM (In case of Soft bricking you can save your device) - https://s3.wasabisys.com/updatofw/GALAXYJ5/SM-J530F/BTU/SM-J530F_1_20190405203714_44wceovclw_fac.zip
Samsung USB Drivers - https://developer.samsung.com/common/download/check.do?actId=698
Copy the No Verity OPT Encrypt file,RMM State Bypass,What kernel u need,The rom u need,Magisk and Magisk Manager APK to ur SD Card.
Enable Developer options(Go into About phone,Software information,Tap several times on Build number until it says you are a developer.
Then go to Settings > Developer options > Check Oem UNLOCK and USB Debugging.
If you broke your device go to last lines(down)
If you already downloaded the files lets begin!
1.Turn off your phone and boot into download mode (Hold Volume Down,Home and Power and them press Volume UP)
2.Install Samsung USB DRIVERS on PC
3.Connect your Phone to your PC by USB Cable.
4.Open odin and load the twrp tar in AP slot.
5.Go to options and uncheck Auto Reboot
6.Click start
7.When in ODIN it shows PASS,Hold Volume Up,Home and power until the screen turns black then immiediately release and Hold Volume UP,Home and Power until the TWRP Screen Appears.
8.Tap on Keep Read Only and then Wipe and Format Data.Type "yes" without ".
9.Tap on Reboot and then Recovery
10.Tap on install then on Select Storage And Micro SDCard.
11.Press on No verity Opt Encrypt and swipe.
12.Press back button and Install RMM State Bypass Mesa.
13.Press back button and Install Magisk.
14.Tap on Wipe Cache and Dalvik and Then Swipe
15.Press the middle button(Home) and Tap on Reboot and then System.
16.Wait for the phone to boot and configure it.
17.Enable Developer options again and enable OEM Unlock and USB Debugging.
18.Disconnect Your Phone from the PC.
If you just wanted Root, You are Done.
Install Helios Pro Kernel to Stock ROM -
1.Go into recovery
2.Install > Select Storage > Helios Pro Kernel file
3.Swipe
4.Wipe Cache and Dalvik and Reboot to System.
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
Install Custom Rom -
1.Boot Into TWRP (When powered OFF Hold Volume UP,Home and Power)
2.Go to Wipe and Select System,Data,Cache,Internal Storage and swipe.
3.Then click on Wipe and Format Data. (Recommended)
4.Go to Install and select what ROM you want to Install:
-Promotheus One UI (Pie ROM)
-Promotheus Lite (OREO ROM)
Click on First "Click to show content" for Promotheus One UI
Click on Second "Click to show content" Promotheus Lite
1.In Aroma Installer Click next and agree to the terms and conditions
2.Then click Full Wipe.
3.Select What Mods you want
4.Select what BloatWare you want.
5.Click Install.
6.After its done Reboot.
7.After ~15 seconds of the Samsung Logo Hold Volume Down,Home and Power then release when the screen turns black.
8.After it boots it will be laggy.Complete the setup and connect to Google and Samsung Account and update everything first ftom Galaxy Store then from Play store.Then reboot and it will not be laggy.
9.You will see that you dont have root, to fix this Reboot into Recovery (You know the procedure) and go to Install > Select Storage > MicroSD Card > HeliosPie Kernel 3.1 and swipe.
10.Wipe Cache and Dalvik and reboot.
11.After it boots you will have Root and a Pie Custom Rom!
12.If you do not pass Safety Net,Go to Magisk > Modules > And disable BusyBox for Android NDK.
You are Done! Now install your favorite apps!
1.Boot into Recovery
2.Install > Promotheus Lite A8+
3.In Arome click Next and Agree to the Terms and Conditions.
4.Select your Mods
5.Select your BloatWare
6.Tap on Install and Reboot to System.
7.After ~15 seconds of The Samsung LOGO and then Hold Volume Down,Home and Power and Release when the screen turns black.
8.After the phone boots it will be very laggy.Complete the setup and connect to Google and Samsung Account and update everything From Galaxy Store and Play Store.
9.You will see you dont have root.Boot into Recovery and Tap on Install > Select Storage > Micro SDCard > Helios Pro Kernel.
10.Reboot to System.
11.You are done
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
If you Soft Brickes your device, open odin. Hold Volume Down,Home and Power until you are in download mode.
In odin select BL in BL box
AP in AP box
CP in CP box
CSC in CSC box (Important select CSC not Home_CSC)
Click Start and wait.
Your device will boot.
Finish the setup and enable developer option blah blah blah (Try Again)
If you dont see Oem unlock,You need to wait 7 days.
So thats it! If you have any problem reply!
Click to expand...
Click to collapse
The TWRP recovery does not stay there.
When flashing the "No verity Opt Encrypt", it fails with an error message in red. Only genuine binaries can be flashed.
Is there a simple answer to this ?
I've re-installed my stock ROM for now, no Root or TWRP.
Thank you.
Nice custom roms
One UI 3.0 beta has been released for Galaxy A51 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
You may also roll back to One UI 2.5 or update to stable One UI 3.0, when it's released with this method:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
Thank you for your support and I hope I helped you!
Added SD Card Method too!
Added Odin Method!
Hi do you have a link for the one ui3.0 firmware cheers