EDIT1: Had to reflash my phone and tried this boot file again. It didn't work right.
Then I flashed motofoca boot 6 again and it was OK. So ONLY boot from motofoca works
OK with compass: http://www.multiupload.com/VXXROHWR2R
Finally I found a way to fix the compass problem with newer ROMs.
I found a new GT-I5500L rom (Argentina aug 2011) here and used the boot.img for the 2.2 XWJPL rom I use now.
boot.img is kernel+root filesystem like devices etc (kernel is 2.6.32.9-perf)
I5500LUYJPL_I5500LAROJP9_I5500LUYJPL_HOME.tar.md5
modified: 2011-08-10
firmware for: ARO
PDA: I5500L UYJPL
CSC: I5500L AROJP9
PHONE: I5500L UYJPL
Code:
21-07-2011 07:10 18.919.424 amss
21-07-2011 06:31 6.205.440 boot.img
21-07-2011 07:10 6.197.248 csc.rfs
21-07-2011 06:31 6.467.584 recovery.img
21-07-2011 06:34 142.884.864 system.rfs
Other firmware:
UFN - I5500LUYJPL_I5500LUFNJP4_I5500LUYJPL (2011-08-25)
PSN - I5500LUYJPL_I5500LPSNJP4_I5500LUYJPL (2011-08-17)
What to do:
Download the rom
http://dl.dropbox.com/u/6350098/froyo 2.2.2/I5500LUYJPL_I5500LAROJP9_I5500LUYJPL_HOME.tar.md5
Unpack the boot.img file from the tar archive
Start ODIN, select proper OPS en "One Package"
Select the boot.img and flash
Cheers
hey you are from argentina right?
join this #gti5500 on freenode wanna talk with you im from argentina too
Just found out on the board that the compass can be fixed with /system/bin/memsicd
Now we only must know what to patch.
One example: http://forum.xda-developers.com/showpost.php?p=16965730&postcount=498
Cheers
It looks like it is already fixed in latest ROM JQ3 as I've noted here http://forum.xda-developers.com/showpost.php?p=18312822&postcount=2502
No need to fix it ourselves anymore.
Thx. It looks like it kinda works now in XWJQ3.
Cheers
Froyo 2.2.2 JPO
Hello
Using Chekfusdownloader I found a JPO ROM
Product Code: GT-I5500YKPARO
Latest firmware: I5500LUYJPO/I5500LAROJPA/I5500LUYJPO/I5500LUYJPO
Modified: 22/09/2011 09:30:53 a.m.
Filename: GT-I5500L_ARO_1_20110922093049.zip.enc2
This is an excelent ROM with compass fixed!!!!
Thought i should let you know that WE HAVE a WORKING METHOD for flashing APPROVED firmwares listed on Firmware Finder!
PLEASE, READ the OP + HOW TO 3 times before proceeding, so that way we avoid unpleasant flash situations, like those when users flashed P30 Pro firmwares on P30 devices or vice versa
WE CAN USE ONLY APPROVED FullOTA.zip firmwares using links from Firmware Finder (Android version / DESKTOP version). It will work 100% if you will follow the instructions bellow to the letter!
BE ADVISED!
A. Keep in mind that you are going to flash a newer version that maybe is not yet released for your region and could result in having to Factory Reset your phone. Also it’s possible that the firmware will not pass Safety Net Test! and therefore some apps could stop working or not appear as available for installing on Google Play! It’s safer to flash a newer version ONLY after you’ve read that someone else has received it by OTA in the same or different country OR I update OP with that info. Always BACKUP before proceeding!
B. The method described bellow is intended to be used on updating on LOCKED BOOTLOADER by using Huawei HiSuite alongside a great app created by @IProfessor, the dev who coded HISuite Proxy to be used on Huawei devices – THANKS to @IProfessor for your excellent app & to @nomone for letting me know about this release.
I'm not responsible for bricked devices, dead Huawei NM cards or any other problems that can appear if you flashed wrong versions!!!
Latest VOG-L29 C10 / VOG-L09 C431 / VOG-L29 C431 / VOG-L29 C432 / VOG-L29 C675 firmware link is for v10.1.0.195, added on 07.01.2021, with December SP as chengelog.
Latest VOG-L04 C69, VOG-L04 C605, VOG-L29 C185, VOG-L29 C461 & VOG-L29 C605 firmware link is for v10.1.0.163, added on 11.10.2020.
HOW TO FLASH for VOG devices :
1. Download and use ONLY this version from my Gdrive, HiSuite_10.0.1.100_OVE ;
2. Download and unzip HISuite Proxy.
3. Open HISuite Proxy Application & click on "SETUP" button; after all "SETUP" process is done, check in Huawei HiSuite settings if the SETUP wrote the proxy configuration like Proxy Adress 127.0.0.1 and Port 7777, then proceed to next step;
4. Use the link corresponding to your cust as following:
____________________________________________________________________________________________________________
ONLY FOR VOG-L29 C10 / VOG-L09 C431 / VOG-L29 C431 / VOG-L29 C432 / VOG-L29 C675 (SAFETY NET PASSES) use as bellow:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v506966/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.195
ONLY FOR VOG-L29 C675 use as bellow:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v479659/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.177
ONLY FOR VOG-L04 C69, VOG-L04 C605, VOG-L29 C185, VOG-L29 C461 & VOG-L29 C605 use as bellow:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v464970/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.163
ONLY FOR VOG-L04 devices flash alongside Base firmware v163
ON CUST PKG (open link in browser and then copy URL) -
http://update.dbankcdn.com/TDS/data...1755/v463506/f1/full/changelog_cust_hw_la.xml
ON Point Version (tick box and write) : VOG-L04-CUST 10.0.0.22(C605)
Also, DON'T FORGET TO tick CUST PKG box under normal OS!
ONLY FOR VOG-L29 C636 use as bellow:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v433814/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.145
For VOG-L04 C792, PLEASE use links from this post #1214.
___________________________________________________________________________________________________________
Make sure that CUST PKG & Preloaded PKG boxes are blank for when you flash ONLY PACKAGE URL (see SS bellow OP), same where is written BLA (remove any words from right side, on CUST PKG & Preloaded PKG)!
5. Check Normal OS;
6. OPEN Huawei HiSuite, connect it to your phone (be sure that HiSuite Proxy remains OPENED ALL THE PROCESS) and check for an update. You will be prompted to update to latest available (according to the link you've used) Hit OK and let HiSuite download and install the update. After successful update, your phone will restart and you can close HiSuite Proxy.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL released EMUI 10.1 firmware links can be found bellow!
EMUI 10.1 BASE firmware for P30 PRO (VOG-L09 / VOG-L29) devices:
FLASH ONLY ON P30 PRO (VOG-L09 / VOG-L29), OTHERWISE YOU WILL GET SOFTBRICK
Version 10.1.0.169 is only for VOG-L29 C675:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v473411/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.169
Version 10.1.0.166 is only for VOG-L29 C675:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v462514/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.166
Version 10.1.0.163 is only for VOG-L04 C69, VOG-L04 C605, VOG-L29 C185, VOG-L29 C461 & VOG-L29 C605:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v464970/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.163
Version 10.1.0.161 is only for VOG-L29 C431 & VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v470222/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.161
Version 10.1.0.156 with July SP is only for VOG-L29 C431 / VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v441612/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.156
Version 10.1.0.152 is only for VOG-L29 C675:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v444913/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.152
Version 10.1.0.151 is only for VOG-L04 C69, VOG-L04 C605, VOG-L29 C185, VOG-L29 C461 & VOG-L29 C605:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v445128/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.151
Version 10.1.0.150 with August SP is only for VOG-L09 C431 / VOG-L29 C431 & VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v446036/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.150
Version 10.1.0.146 is only for VOG-L29 C675:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v436243/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.146
Version 10.1.0.145 is only for VOG-L29 C636:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v433814/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.145
Version 10.1.0.141 is only for VOG-L04 C605, VOG-L29 C185, VOG-L29 C461 & VOG-L29 C605:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v428543/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.141
Version 10.1.0.140 is only for VOG-L09 C431 & VOG-L29 C431 / VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v433349/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.140
Version 10.1.0.133 is only for VOG-L09 C431 & VOG-L29 C431 / VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v423284/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.133
Version 10.1.0.126 is only for VOG-L29 C185, VOG-L29 C636 & VOG-L29 C605:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v413141/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.126
For VOG-L04 C792, PLEASE use links from this post #1214.
For VOG-L04 C25, PLEASE use links from this post #525.
Version 10.1.0.123 is only for VOG-L09 C431 & VOG-L29 C431 / VOG-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v410289/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.123
Patch 02 ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v408063/f1/full/changelog.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.123(patch02)
EMUI 10.1 BASE firmwares for P30 (ELE-L09/ELE-L29) devices:
For video tutorial (be advised that it has P30 (ELE) links on it, so if you're gonna use a P30 PRO device, use VOG links instead), watch this video! thanks @Alexxxx1 for creating & share it!
FLASH ONLY ON P30 (ELE-L09 / ELE-L29), OTHERWISE YOU WILL GET SOFTBRICK
Version 10.1.0.150 is only for ELE-L09 C431 & ELE-L29 C431 / ELE-L29 C432
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v446203/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.150
Version 10.1.0.140 is only for ELE-L09 C431 & ELE-L29 C431 / ELE-L29 C432
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v434974/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.140
Version 10.1.0.133 is only for ELE-L09 C431 & ELE-L29 C431 / ELE-L29 C432
ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v423641/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.133
Version 10.1.0.126 is working on ELE-L04 C69 & ELE-L29 C605:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v411960/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.126
Version 10.1.0.123 is working on ELE-L09 C431 & ELE-L29 C431 / ELE-L29 C432:
ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v406323/f1/full/filelist.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.123
Patch 01 ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v414292/f1/full/changelog.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.123(patch01)
Patch 03 ON Package URL copy following link (open link in browser and then copy URL) - http://update.dbankcdn.com/TDS/data/files/p3/s15/G5625/g1755/v414188/f1/full/changelog.xml
ON Point Version you have to tick it and write : ELE-LGRP2-OVS 10.1.0.123(patch03)
That’s all, folks! Right now you should have updated to latest FIRMWARE available for your device! I will update OP with new BASE firmwares as soon as they will get approved & tested, so SUBSCRIBE to this thread so you'll be updated!
thanks friend. let's see how this goes
NOT WORKING as of 01.12.2020
CUST & PRELOAD PKG's for SOFTWARE CUST REBRAND
In this post i will share links for CUST & PRELOADS that you could use to SOFTWARE REBRAND (CHANGE YOUR ORIGINAL CUST to another one from a different zone) a broken cust device or a C900 one.
HOW TO CHANGE IT - BE AWARE IT MIGHT FACTORY RESET DEVICE OR Safety Net Pass to fail!, so flash at your OWN RISK!
1. DO ALL the steps from 1-4 that are written in OP! then proceed to next step;
2. Use any of the Cust & Preload bellow toghether when flashing; DON'T FLASH C431 Cust PKG & C432 Preloaded PKG, it will fail or worse, softbrick device!
ONLY FOR VOG-L29 devices use packages as follow :
C431 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...755/v329470/f1/full/changelog_cust_hw_eea.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.19(C431)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...51154/f1/full/changelog_preload_hw_eea_R2.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.5(C431R2)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C432 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...1755/v351139/f1/full/changelog_cust_hw_eu.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.19(C432)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...351140/f1/full/changelog_preload_hw_eu_R2.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.5(C432R2)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C461 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...755/v414544/f1/full/changelog_cust_hw_cea.xml
Point Version (thick box and write) : VOG-L29-CUST 10.1.0.11(C461)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...52370/f1/full/changelog_preload_hw_cea_R1.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.3(C461R1)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C185 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...v350673/f1/full/changelog_cust_hw_meafnaf.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.8(C185)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...3/f1/full/changelog_preload_hw_meafnaf_R3.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.1(C185R3)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C605 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...1755/v351585/f1/full/changelog_cust_hw_la.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.19(C605)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...351586/f1/full/changelog_preload_hw_la_R1.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.3(C605R1)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C636 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...v396050/f1/full/changelog_cust_hw_spcseas.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.10(C636)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...1/f1/full/changelog_preload_hw_spcseas_R1.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.3(C636R1)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C675 CUST & PRELOAD PKG's
CUST PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...1755/v352720/f1/full/changelog_cust_hw_in.xml
Point Version (thick box and write) : VOG-L29-CUST 10.0.0.4(C675)
Preloaded PKG (open link in browser and then copy URL to HiSuite app) -
http://update.dbankcdn.com/TDS/data...355615/f1/full/changelog_preload_hw_in_R3.xml
Point Version (thick box and write) : VOG-L29-PRELOAD 10.0.0.2(C675R3)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3. Check Normal OS (left side of app, under Proxy Address ) and bellow it thick also those 2 boxes - CUST PKG & Preloaded PKG.
4. OPEN HiSuite, connect it to your phone (be sure that HiSuite Proxy remains OPENED ALL THE PROCESS) and check for an update. You will be prompted to update to latest available. Hit OK and let HiSuite download and install the update. After succesfull update, phone will restart and you can close HiSuite Proxy app.
Thanks man for spreading the app, I'm really glad to see it working and helping people out, I'll try to update it regularly hoping for better and easier features. (I've already fixed the patching method, which was confusing a lot of people lol, it was like that because I didn't want the app to run as admin, as that's really dangerous and might bring concerns for people, now it runs as admin only for milliseconds when it wants to replace the patched httpcomponent.dll with original one... Version 1.7.5)
Cheers ?
IProfessor said:
Thanks man for spreading the app, I'm really glad to see it working and helping people out, I'll try to update it regularly hoping for better and easier features. (I've already fixed the patching method, which was confusing a lot of people lol, it was like that because I didn't want the app to run as admin, as that's really dangerous and might bring concerns for people, now it runs as admin only for milliseconds when it wants to replace the patched httpcomponent.dll with original one... Version 1.7.5)
Cheers ?
Click to expand...
Click to collapse
Thanks for letting me know, i will update OP. Your newest version, v1.7.5 is allready linked on my OP.
Thanks again for this GREAT APP and for the chance you've given to us, P30 / P30 Pro users who had no way of updating using OTA firmware untill these days, when you created the app.
Keep on doing great things, m8!
Sent from my VOG-L29 using XDA Labs
SilviuO said:
, one more step needed, the link for the EMUI 10.1 firmware from Firmware Finder :highfive:
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Can I try version 208, 210 ...?
Thanks
SilviuO said:
Hi guys,
I thought i should let you know that WE HAVE a WORKING METHOD for flashing FullOTA's zip from Firmware Finder!
This thread is
UNDER CONSTRUCTION and will be updated with SS and FullOTA.zip base package link
as soon as the firmware will be available on Firmware Finder.
You can download anyAPPROVED FullOTA update.zip from Firmware Finder (Android version / ON-Line version or PC version) and flash it on your device. Currently it works 100% if you follow the instructions bellow to the letter ! ! !
BE AWARE !
A. Keep in mind that you are going to flash a newer version that maybe is not yet released for your region and could result in having to reset your phone or an unstable system. Also it’s possible that the firmware might not be verified yet by Google (won’t pass the Google certification, so you will not be able to install Netflix or other apps that requires to be Google certified) and therefore some apps could stop working or not appear as available for installing. Most of the time it’s safe to flash a newer version after you’ve read that someone has received it by OTA in the same or different country. When i tested on EMUI 10 with firmware v10.0.0.208 no wipe was done. I was coming from EMUI 10 v10.0.0.195, but this is no insurance that it will never wipe your phone, so backup always before proceeding ! ! !
B. The method described bellow is intended to be used on updating from EMUI 10 to EMUI 10.1 on LOCKED BOOTLOADER by using HiSuite from Huawei and one app created by @IProfessor, the dev who coded HISuite Proxy to be used on Huawei devices – THANKS to @IProfessor for your excellent app & to @nomone for letting me know about this update method.
C. Firmwares links are the ones got from Firmware Finder and are OFFICIAL FullOTA’s base packages, CUST & PRELOAD zips. Flash ONLY APPROVED FOR YOUR DEVICE FIRMWARES, otherwise it will not succeed and might get softbricked !
IMPORTANT: In order to update ON THE SAME ANDROID version and not performing an upgrade like EMUI 10 to EMUI 10.1, you only need to use Package URL (FullOTA update zip / base zip) on step 5 + 6 and only "Point Version" ticked, no need to use CUST & PRELOAD!
HOW TO USE
1. Download and Install Hisuite ;
2. Download and unzip HISuite Proxy ;
3. Open HISuite Proxy Application. Click on "HTTP Component" button. Choose "httpcomponent.dll" file which exists in HiSuite's folder from C:\Program Files (x86)\HiSuite and then choose a new folder to save the patched file inside it to replace it later or replace the old file with the new patched "httpcomponent.dll" when asked where to put the patched one;
4. Open HiSuite, go into the settings and set the proxy address to 127.0.0.1 and port 7777, then close it (even from Taskbar);
5. OPEN HIsuite Proxy app and use the following links ON it:
Package URL (FullOTA update zip / base zip) – LINK NOT YET AVAILABLE! WILL BE UPDATED!
CUST PKG URL – VOG-L29-CUST 10.0.0.19(C431)
Preloaded PKG URL - VOG-L29-PRELOAD 10.0.0.5(C431R2)
6. Then on the right side, in the case before "Point Version" you have to thick all 3 of them after you wrote as bellow :
Package – Build number NOT YET AVAILABLE! WILL BE UPDATED!
CUST PKG - VOG-L29-CUST 10.0.0.19(C431)
Preloaded PKG - VOG-L29-PRELOAD 10.0.0.5(C431R2)
7. Check Normal OS, CUST PKG, Preloaded PKG.
8. OPEN HiSuite, connect it to your phone (be sure that HiSuite Proxy remains OPENED ALL THE PROCESS) and check for an update. You will be prompted to update to latest available. Hit OK and let HiSuite download and install the update. After succesfull update, phone will restart and you can close HiSuite Proxy app.
That’s all, folks! Right now you should have updated to latest APPROVED FIRMWARE available for your device !!!
Goodluck flashing ! ! !
Click to expand...
Click to collapse
Great guide mate :angel: thanks
jandro00 said:
Can I try version 208, 210 ...?
Thanks
Click to expand...
Click to collapse
YES, any firmware that says it's approved for your IMEI on Firmware Finder (use mobile version and on Settings choose Show only Full OTA; then on web version check that one that has the same build&release date as yours)
Ex. To be written in right case and thick ''Point Version'' VOG-LGRP2-OVS 10.0.0.208
To be written in Package URL http://update.dbankcdn.com/TDS/data/files/p3/s15/G4705/g1755/v408687/f1/full/changelog_base.xml
Then follow step 8 and wait for download and install. But be aware, it might get you uncertified in Google Playstore
Sent from my VOG-L29 using XDA Labs
jandro00 said:
Can I try version 208, 210 ...?
Thanks
Click to expand...
Click to collapse
Yes. If you're already on Emui 10 no need to use cust and preload. Also, as SilviuO said, pay attention at SafetyNet. Even if the firmware is approved, it's not sure the firmware will pass it
@SilviuO I think 10.1 cust and preload will released. Or maybe they will remain the same and in this case I think it's not needed to use them again for the update
nomone said:
Yes. If you're already on Emui 10 no need to use cust and preload. Also, as SilviuO said, pay attention at SafetyNet. Even if the firmware is approved, it's not sure the firmware will pass it
@SilviuO I think 10.1 cust and preload will released. Or maybe they will remain the same and in this case I think it's not needed to use them again for the update
Click to expand...
Click to collapse
I thought about it, but without base firmware, i can't make any tests .
When it will be available, i will ask users that are on EMUI 10 v195 to update ONLY using base firmware. If it's OK, i will update OP and wait for EMUI 11 to add cust&preload ???
Sent from my VOG-L29 using XDA Labs
SilviuO said:
I thought about it, but without base firmware, i can't make any tests .
When it will be available, i will ask users that are on EMUI 10 v195 to update ONLY using base firmware. If it's OK, i will update OP and wait for EMUI 11 to add cust&preload ???
Click to expand...
Click to collapse
EMUI 11 :laugh: :laugh:
it's it work for p30 not pro version
kraker77 said:
it's it work for p30 not pro version
Click to expand...
Click to collapse
YES, any firmware that says it's approved for your IMEI on Firmware Finder (use mobile version and on Settings choose Show only Full OTA; then on web version check that one that has the same build&release date as yours)
Ex. v10.0.0.206 is approved for installing for ELE-LGRP2-OVS. To be written for your device in right case and thick ''Point Version'' ELE-LGRP2-OVS 10.0.0.206
To be written in Package URL http://update.dbankcdn.com/TDS/data/files/p3/s15/G4830/g1755/v409552/f1/full/changelog_base.xml
Then follow step 8 and wait for download and install. But be aware, it might get you uncertified in Google Playstore
Sent from my VOG-L29 using XDA Labs
Alexxxx1 said:
So, if I use for example build 206 which is made for Middle East C185 and force it in Husuite and flash on my current build 195 for EU region C432 what it may cause... Is my build number stay correct? Because on earlier models from experience if you flash wrong build no it triggered to change oeminfo from lets say c432 to c900 and stuck on that version and made big issues...
Poslato sa ELE-L29 pomoću Tapatoka
Click to expand...
Click to collapse
Ok, so if use other firmware from other cust WITHOUT CUST&PRELOAD, only FullOTA.zip, it will not change your cust, it will remain the same, it will flash without any issuses (need ONLY to be approved) BUT your firmware will be not certified by Google, so you will not pass the Safety Net check.
Sent from my VOG-L29 using XDA Labs
SilviuO said:
Ok, so if use other firmware from other cust WITHOUT CUST&PRELOAD, only FullOTA.zip, it will not change your cust, it will remain the same, it flash without any issuses (need ONLY to be approved) BUT your firmware will be not certified by Google, so you will not pass the Safety Net check.
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Ok, so its important to escape flashing Cust i Preload if I want to try builds for other region, right? If I try to flash cust i preload for different region it can cause issues or it can not be flashed?
Poslato sa ELE-L29 pomoću Tapatoka
Alexxxx1 said:
Ok, so its important to escape flashing Cust i Preload if I want to try builds for other region, right? If I try to flash cust i preload for different region it can cause issues or it can not be flashed?
Poslato sa ELE-L29 pomoću Tapatoka
Click to expand...
Click to collapse
YES, and i think - untill further tests and when the FullOTA.zip will be available - that we might not need the cust&preload files to update to EMUI 10.1, because it uses the same files it used when updating from EMUI 9.1 to EMUI 10....But i will clarify that when the link will be available and do some tests ?
If you flash cust and preload from other custs (let's say C636 CUST&PRELOAD over C431 cust), you will get a software rebrand and you will change your actual cust to C636, BUT you will not receive OTA's anymore and in case of warranty it will not be valid. In order to get back to your original cust (if you moved to C636), you will need to flash ONLY C431 CUST&PRELOAD using HISuite Proxy, but i don't reccomend messing with cust
Sent from my VOG-L29 using XDA Labs
SilviuO said:
YES, and i think - untill further tests and when the FullOTA.zip will be available - that we might not need the cust&preload files to update to EMUI 10.1, because it uses the same files it used when updating from EMUI 9.1 to EMUI 10....But i will clarify that when the link will be available and do some tests [emoji51]
If you flash cust and preload from other custs (let's say C636 CUST&PRELOAD over C431 cust), you will get a software rebrand and you will change your actual cust to C636, BUT you will not receive OTA's anymore and in case of warranty it will not be valid. In order to get back to your original cust (if you moved to C636), you will need to flash ONLY C431 CUST&PRELOAD using HISuite Proxy, but i don't reccomend messing with cust
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Thank You for very detailed explanation. I hope that people will read carfelly your tutorial which is detailed too. Great Job SilviuO! [emoji106][emoji482]
Poslato sa ELE-L29 pomoću Tapatoka
I have succeeded. It does not work without loading the cust and preload files. I did the test yesterday and it didn't work. Today I understood it better and ready many thanks friends
I tried to upload an image, but I could not.
Now i have version 210 :fingers-crossed:
jandro00 said:
I have succeeded. It does not work without loading the cust and preload files. I did the test yesterday and it didn't work. Today I understood it better and ready many thanks friends
I tried to upload an image, but I could not.
Now i have version 210 :fingers-crossed:
Click to expand...
Click to collapse
Great, m8. And are you Google Certified? So i may update OP with info and link for firmware for those who want to update theor phones to v10.0.0.210.
Sent from my VOG-L29 using XDA Labs
SilviuO said:
Great, m8. And are you Google Certified? So i may update OP with info and link for firmware for those who want to update theor phones to v10.0.0.210.
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
does not appear certified or not certified. But in the Netflix search engine it does not appear, presumably it is not certified. Only not appear because the previous one was.
Thank you
Hi everyone, this is a short guide on how to flash a GSI on the A7 Lite (without TWRP).
Its a nice little tablet for the price but it doesn't have a very powerful SOC and for me the One UI is barely usable on this device. The launcher and the whole system UI feel extremely laggy, but apps generally run fine.
I tried phhusson's custom Android 12 GSI and the device was almost resurrected. Much much less UI lag and the battery life is the same as stock ROM. The only thing i found not working is MTP but i don't need it.
Since i saw a couple users here asking about GSIs i decided to make a very simple guide.
As always do this at your own risk. You may brick your device. You will void your warranty.
Follow the guide only if you know what your are doing. Read each step carefully and avoid copy pasting stuff randomly.
I won't go deep into details as i believe you should have some basic knowledge if you decide to do this.
The procedure sould work for both T220 and T225 (i tested it on a T220).
I did this on Windows using WSL for some of the steps.
Sources
Thanks to @kkoo and @Brepro1 for the useful info
- https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/
- https://forum.xda-developers.com/t/...r-img-and-flashing-our-modifications.4196625/
Requirements
- Unlocked bootloader
If you haven't done this already follow the steps in parts 1-2 from:
[TUTORIAL] How To Unlock & Root Tab A7 Lite T220/T225, & Install LSPosed, Magisk, Mods
While some of these instructions are copied from other sources, I combined all the different things I learned, because no one guide was sufficient, and all needed additional info, so I expanded it all to one place. Part I is partly from...
forum.xda-developers.com
- Latest official ROM
I used T220XXU1AVE1 for EUX region
Samsung Galaxy Tab A7 Lite Firmware Download SM-T220 Free Download
Samsung Galaxy Tab A7 Lite Firmware Download SM-T220 Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
- Download your preferred GSI
I used AOSP 12.1 v414 with gapps from phhusson
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
- Clean vbmeta.img from Google
https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
Tools
- lz4
Releases · lz4/lz4
Extremely Fast Compression algorithm. Contribute to lz4/lz4 development by creating an account on GitHub.
github.com
- simg2img
[DEV][Tools] simg2img for Windows
Hello, although I'm working in Linux (VM too) I rewrote the SIMG2IMG so far for Windows (PE32, x86) Usage: simg2img.exe -i -o Optional: -d for debugging messages, listing all chunks of the image...
forum.xda-developers.com
- lpunpack and lpmake
[GUIDE] OTA Tools LPUnpack
Please see this URL https://android.googlesource.com/platform/build.git/+/eec4a7cba4face3370acb6293ab357879920b467 and this for more information. Hi everyone. I'm surprised I havent seen a thread about ota tools yet and lpunpack. This zip file...
forum.xda-developers.com
- tar-md5-script-tool
Use the attached tar-md5-script-tool.zip
Steps
1. Extract official ROM files (BL, AP, CP, CSC)
2. Extract AP .tar.md5
3. Decompress the extracted super.img.lz4
Code:
lz4 -d super.img.lz4 super.img
4. Convert the sparse super.img
Code:
simg2img super.img super.ext4.img
5. Unpack super.ext4.img
Code:
lpunpack super.ext4.img
I got 4 partitions in my image (should be the same for all T220/T225 ROMs):
- odm.img
- product.img
- system.img
- vendor.img
6. Replace system.img with your GSI (rename it to system.img)
7. Get the size of all partitions and the size of the original super.ext4.img (not the sparse super.img)
Code:
stat -c '%n %s' IMG_FILE.img
8. Repack super.img
Code:
lpmake --metadata-size 65536 \
--super-name super \
--metadata-slots 2 \
--device super:ORIGINAL_SUPER_IMG_SIZE \
--group main:SUM_OF_ALL_PARTITIONS_SIZES \
--partition odm:readonly:ODM_PARTITION_SIZE:main \
--image odm=./odm.img \
--partition product:readonly:PRODUCT_PARTITION_SIZE:main \
--image product=./product.img \
--partition system:readonly:SYSTEM_PARTITION_SIZE:main \
--image system=./system.img \
--partition vendor:readonly:VENDOR_PARTITION_SIZE:main \
--image vendor=./vendor.img \
--sparse \
--output ./super_new.img
Replace ORIGINAL_SUPER_IMG_SIZE, SUM_OF_ALL_PARTITIONS_SIZES, ODM_PARTITION_SIZE, PRODUCT_PARTITION_SIZE, SYSTEM_PARTITION_SIZE, VENDOR_PARTITION_SIZE with the values you obtained in step 7.
Read lpmake docs for a more detailed expalation of the args used above:
partition_tools - platform/system/extras - Git at Google
9. Compress the repacked super_new.img
Code:
lz4 -B6 --content-size super_new.img super_new.img.lz4
10. Compress the clean vmbeta.img
Code:
lz4 -B6 --content-size vbmeta.img vbmeta.img.lz4
11. Extract tar-md5-script-tool.zip
12. Put all the *.img.lz4 files extracted from AP .tar.gz in tar-md5-script-tool dir
13. Replace super.img.lz4 and vbmeta.img.lz4 in tar-md5-script-tool dir with your repacked and compressed super_new.img.lz4 (rename it to super.img.lz4) and the clean compressed vbmeta.img.lz4
14. Run batch.bat in tar-md5-script-tool dir
You will find the new AP .tar.md5 in the temp-folder subdir
15. Flash your custom AP .tar.md5 with Odin along with BL, CP, CSC from original ROM
16. Reboot into recovery and do a factory reset
17. Done
Can you share screenshot as I think treble projects are only stable on SD chipset.
Abish4i said:
Can you share screenshot as I think treble projects are only stable on SD chipset.
Click to expand...
Click to collapse
System lang is italian but should be easy to understand.
I found only a couple bugs so far in phhusson's GSI:
- in the launcher dragging apps from drawer to homescreen doesn't always work (just use another launcher)
- crashed once while searching in settings app
I use the tablet only for media consumption and some retrogaming, so there are probably other bugs i haven't noticed.
This is a generic guide, it won't include a "known issues" section since it largely depends on what GSI you choose.
I haven't tested this on the LTE version so i can't say for sure if mobile network works or not.
Unfortunately i don't have the time to make a custom ROM, test it and keep it updated here on the forum but maybe if there is enough interest someone will do it.
I hope other users will try to flash a GSI and share their experience here so we can gather some info on working/broken stuff, especially on the LTE model since i can't test that.
Hello,
I'm sorry but what am I missing here?
I'm a little fustrated cause after hours and hours of headaches I got to the second to last step which involves tar-md5-script-tool
I simply put all the .img.lz4 files from AP and replace super & vbmeta files which the ones that I converted and try to run the batch.bat as instructed.
However nothing happens and this is what the program spits out.
On the tar tool xda forum it says that it convers .img files, not .img.lz4 . Are we supposed to extract all the .img files from inside the .lz4 files?
I appreciate the guide but there are a lot of missing details I had to fill in and figure out myself, like the fact that from step 4 to step 8 you need to use WSL or a Linux distro (using simg2img for Windows messes things up so please use the one from otatools inside a linux bash)
Also for people that are not familiar with linux you need to type "./" in front of directed commands ( in this case ./simg2img ./lpunpack ./lpmake)
I'm not a developer or a programmer, maybe you wrote this guide for people more inclined to that, but for me this was pretty hard.
Noob here, but I'm running the "simg2img super.img super.ext4.img" and nothing happens for 5 min and when I'm aborting I'm getting a "Error reading sparse file header".
Any suggestions?
DanneSwe said:
Noob here, but I'm running the "simg2img super.img super.ext4.img" and nothing happens for 5 min and when I'm aborting I'm getting a "Error reading sparse file header".
Any suggestions?
Click to expand...
Click to collapse
Are you using the Windows version of simg2img? If yes, use the one from otatools inside Windows Subsystem for Linux
ReubenMCSM said:
Are you using the Windows version of simg2img? If yes, use the one from otatools inside Windows Subsystem for Linux
Click to expand...
Click to collapse
I can confirm simg2img doesn't seem to work on Windows, i used WSL.
@ReubenMCSM i will update the guide with more details in the future but i don't have much time right now.
For you specific issue, try to use the attached tar-md5-script-tool.
Great thanks!
What's the process with tar-md5-script-tool? Just moving the super.img to the folder and running the batch.bat didn't work the output file in the temp folder is 11 kb. Tried to change super.img to super.tar but no change.
Thanks for the tool, but unfortunately the output is the same, like the problem @DanneSwe has
It looks like the batch.bat script from the tar md5 tool linked in the guide is a bit different from the one i used. I will update the guide.
Try again with the version i attached in the post above.
- Extract the AP tar md5 from official rom
- Copy all .img.lz4 files in the tar-md5-script-tool folder
- Replace super.img.lz4 and vbmeta.img.lz4 (step 13)
- Launch batch.bat, output should look like this
- You will find AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5 in temp-folder
It finally worked! I redid everything and also moved my folder to drive C instead of drive D, maybe this made the difference
ReubenMCSM said:
It finally worked! I redid everything and also moved my folder to drive C instead of drive D, maybe this made the difference
Click to expand...
Click to collapse
What GSI did you pick and could you upload the files you flashed?
I got simg2img to work by using
.\simg2img -i super.img -o super.ext4.img
packed img filename: super.img
output img filename: super.ext4.img
Wrote "super.ext4.img"
The lpunpack and lpmake step isnt working for me ive been at this for days, no luck.
Can someone please help me out by uploading custom AP .tar.md5(file with GSI, the modded one) along with BL, CP, CSC from original ROM to google drive?
thanks!
ramz.pa said:
The lpunpack and lpmake step isnt working for me ive been at this for days, no luck.
Can someone please help me out by uploading custom AP .tar.md5(file with GSI, the modded one) along with BL, CP, CSC from original ROM to google drive?
thanks!
Click to expand...
Click to collapse
I had the same issue. :/
Can someone help me with the T225 LTE model by compiling the AP please? Because for some reason the tar-md5-script tool isnt working for me
Thanks.
Successfully flashed GSI with magisk on my T220 following the OP's procedure. MTP is not working as the OP said. However, I can use my flash drive so I don't really miss MTP.
I chose "system-squeak-arm64-ab-vndklite-gapps-secure.img.xz" for GSI. "Treble Info" app can tell you what image would be compatible with your device.
If you want to use a different launcher like Nova instead of the default one, change the "Smallest width" setting from 600 to 598 in Developer options to hide the annoying taskbar.
AOSP-Mods and "Project Themer - Android 12+" work fine for me.
Here is my build for my device SM-T220 (SM-T220_EUX_T220XXU1AVE1):
GSI: system-squeak-arm64-ab-vndklite-gapps-secure.img.xz
Custom AP: https://www.filehosting.org/file/details/7045394/AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5
Custom AP with Magisk patch: https://www.filehosting.org/file/details/7045714/magisk_patched-25101_cauJQ.tar
You can extract BL and Home_CSC from SM-T220_EUX_T220XXU1AVE1.
Notes: My device is actually SM-T220 XAR, but I have been updating it with SM-T220 EUX firmware versions without any issue.
Pleasance said:
Can someone help me with the T225 LTE model by compiling the AP please? Because for some reason the tar-md5-script tool isnt working for me
Thanks.
Click to expand...
Click to collapse
Here is the custom AP based on the following. Since I don't have SM-T225 device, can't verify it. However, I compiled the AP the same way I did for my SM-T220.
- SM-T225_EUX_T225XXU1AUJ1
- GSI: system-squeak-arm64-ab-vndklite-gapps-secure.img.xz
https://www.filehosting.org/file/details/7046296/AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5
xpdragon said:
Here is the custom AP based on the following. Since I don't have SM-T225 device, can't verify it. However, I compiled the AP the same way I did for my SM-T220.
- SM-T225_EUX_T225XXU1AUJ1
- GSI: system-squeak-arm64-ab-vndklite-gapps-secure.img.xz
https://www.filehosting.org/file/details/7046296/AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5
Click to expand...
Click to collapse
Thank you so much for compiling the AP for me bro but when i try to flash it with odin i get this error
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> preloader.img.lz4
<ID:0/004> FAIL!
For your information the current OS build on my tablet is INS with the baseband version of T225XXU1AVB2 and security patch of 1 Feb 2022 hope this helps you.
DanneSwe said:
What GSI did you pick and could you upload the files you flashed?
I got simg2img to work by using
.\simg2img -i super.img -o super.ext4.img
packed img filename: super.img
output img filename: super.ext4.img
Wrote "super.ext4.img"
Click to expand...
Click to collapse
GSI-12_SM-T220_EUX_T220XXU1AVE1_fac.zip
drive.google.com
Use this ONLY on SM-T220 (without SIM card) and on EUX version.
Pleasance said:
Thank you so much for compiling the AP for me bro but when i try to flash it with odin i get this error
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> preloader.img.lz4
<ID:0/004> FAIL!
For your information the current OS build on my tablet is INS with the baseband version of T225XXU1AVB2 and security patch of 1 Feb 2022 hope this helps you.
Click to expand...
Click to collapse
Here is GSI build for SM-T225_INS_T225XXU1AVB2
https://www.filehosting.org/file/details/7129248/GSI-12_SM-T225_INS_T225XXU1AVB2.zip