Guys here is my condition
My friend had Xt1022 on stock KK(4.4) so I just unlocked BL and went ahead flashing PA5+,Blisspop,Euporia etc and all were stuck at boot loop. whatever ways i tried It ended up in bootloop for over 20 mins.
I tested on twrp 2.8.5,2.8.6 and always got bootloop.
I fixed it by flashing stock LP and then flashing PA
wipe everything..system,data,cache,dalvik and internal storage also....and before flashing check the md5 of the rom.
Already knew and tried it but all in vain
It Helped
Thanks it Helped to sort my issue to ...atleast now on stock LP would check custom ROMS Further...
Related
Hi there.
I had a custom rom on my Galaxy S3, and I wanted to go back to stock rom. Before I had a custom rom, I checked my product code, just in case if I ever wanted to flash stock rom. So, I downloaded a stock rom from sammobile and flashed it with Odin. I had a successful flash, but when the phone rebooted, it stopped at the samsung logo and it's like that every time I turn on the phone.
I aslo tried to flash it with the same rom, but from a different site (androidfirmwares), but every time I treid to do that, Odin crashed ( Odin downloader has stopped working).
I can't even boot into CWR to flash any custom rom, cuz it's gone. There is only stock recovery.
Please help
Which Rom were you trying to flash when this happened, and give details of how you flashed please
luka46 said:
Hi there.
I had a custom rom on my Galaxy S3, and I wanted to go back to stock rom. Before I had a custom rom, I checked my product code, just in case if I ever wanted to flash stock rom. So, I downloaded a stock rom from sammobile and flashed it with Odin. I had a successful flash, but when the phone rebooted, it stopped at the samsung logo and it's like that every time I turn on the phone.
I aslo tried to flash it with the same rom, but from a different site (androidfirmwares), but every time I treid to do that, Odin crashed ( Odin downloader has stopped working).
I can't even boot into CWR to flash any custom rom, cuz it's gone. There is only stock recovery.
Please help
Click to expand...
Click to collapse
if you are getting stuck on the boot screen after you flashed the stock rom this always works..go to recovery do a data reset and wipe cache.
this is really weird and a stupid thing I did when I was completely new to android..a little over a month ago.I got stuck on the boot screen and accidentally flash CF-Root instead of the stock firmware..when the phone rebooted it worked just fine.I dont think its supposed to work that way..:S
ahmedmaaiee said:
if you are getting stuck on the boot screen after you flashed the stock rom this always works..go to recovery do a data reset and wipe cache.
this is really weird and a stupid thing I did when I was completely new to android..a little over a month ago.I got stuck on the boot screen and accidentally flash CF-Root instead of the stock firmware..when the phone rebooted it worked just fine.I dont think its supposed to work that way..:S
Click to expand...
Click to collapse
I did as you said and it works :laugh:
Thank you :good:
Hi .. i installed cwm via odin and flashed CM10.1 .. after the phone boots .. it gets bloked once you touch the screen it reboots
help plz
sounds like a common boot loop, if you can get in to custom recovery, wipe and re flash a re-download rom as it may be corrupted, if it still does not boot wipe and flash neat rom a very stable rom which has massive community support, if still does not boot flash a clean official stock rom and root from scratch.. if you flash an official make sure it does not contain the brick bug
Hi guys, my mothers SGS3 is stuck on bootloop (well just freezes on samsung logo), it was on stock firmware when the problem first occured, i've tried flashing cwm via odin, wiping absolutely everything and then reflashing stock firmware, but problem persisted, i've tried rooting, flashing cwm, and then installing cyanogenmod to no avail.
does anybody have any other ideas that i could try.
Thanks in advance guys.
trooperjohn said:
Hi guys, my mothers SGS3 is stuck on bootloop (well just freezes on samsung logo), it was on stock firmware when the problem first occured, i've tried flashing cwm via odin, wiping absolutely everything and then reflashing stock firmware, but problem persisted, i've tried rooting, flashing cwm, and then installing cyanogenmod to no avail.
does anybody have any other ideas that i could try.
Thanks in advance guys.
Click to expand...
Click to collapse
You flashed stock firmware with Odin, was the flash successful ?
If you need to use recovery, flash TWRP or Philz, CWM is not updated anymore
Try flashing one of the firmwares in this thread.
yeah as far as odin was concerned the flash was successful and set the phone to reboot, but it still just hung at the samsung logo, and right ok im a bit out dated using cwm then it's been a while :Lthanks for the links i'll give it another crack now
thanks again
josephiskandar said:
You flashed stock firmware with Odin, was the flash successful ?
If you need to use recovery, flash TWRP or Philz, CWM is not updated anymore
Try flashing one of the firmwares in this thread.
Click to expand...
Click to collapse
i've tried flashing CM and MIUI using the two recoveries you linked, still no joy. The download links for the firmware doesn't work but i found an equivalent that also has bootloader, csc files etc and still no joy, odin does it's business and says in green pass at the end of it all but it still hangs on the samsung logo, even when i installed miui, it would install all as planned, but then on the reboot it just hangs at the MIUI logo.
i'm lost completely i've never been defeated by a phone :L
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.
Hi,
I have the 925f. I was in a custom rom but had some issues in my phone (7.0 A8 port), so I decided to flash back to stock through ODIN. After flashing G925FXXU5ERA4 it was stuck almost 30 min in samsung logo. Then I went back to DL mode and tried again with the same result. I also tried flashing G925FXXU5EQFC but again it was stuck. I did this several times.
Am I lacking something? Any help will be appreciated.
Nicop.
nicopmdq said:
Hi,
I have the 925f. I was in a custom rom but had some issues in my phone (7.0 A8 port), so I decided to flash back to stock through ODIN. After flashing G925FXXU5ERA4 it was stuck almost 30 min in samsung logo. Then I went back to DL mode and tried again with the same result. I also tried flashing G925FXXU5EQFC but again it was stuck. I did this several times.
Am I lacking something? Any help will be appreciated.
Nicop.
Click to expand...
Click to collapse
If it's stuck in Samsung logo just leave it longer, the first boot can take quite a while
Thanks callumbr1!
It was almost an hour and it didn't passed the logo (I tried two stock roms through ODIN). I solved it by flashing twrp wiping system and a rom through a zip file.
nicopmdq said:
Thanks callumbr1!
It was almost an hour and it didn't passed the logo (I tried two stock roms through ODIN). I solved it by flashing twrp wiping system and a rom through a zip file.
Click to expand...
Click to collapse
anytime when u flashing new firmware via odin u need to go to recovery and factory reset the device , thats the point that odin dont do while installing and that why u cant pass trought samsung logo.