I can't write to the internal SD card anymore after doing a factory reset / full wipe and reflash (http://forum.xda-developers.com/tmo...ent/testing-debloated-dob1-rom-t3077507/page1).
The phone was working fine, the ROM is super fast and was perfect. Of course I had to flash the update to the "stable" version, right? No offense to the OP, I am sure it is just a random android glitch on my phone. Love the ROM.
Anyway, on a Mac and on the road traveling... In terminal I get the following error:
127|[email protected]:/ # fsck_msdos /storage/emulated/0
** /storage/emulated/0 (NO WRITE)
Invalid signature in boot block: 00002|[email protected]:/ #
Any ideas how I can fix this? The phone is running just fine less the write access to /emulated/0. I have tried SD fix from the market and various adb commands as well as the same or similar commands from the android terminal emulator.
In the process I was able to reformat my internal SD by mistake and therefore have no data backup (smart, I know). I am fine with starting from a factory baseline and reinstalling everything, I just need to know how to get there (eg. do something that will ensure remove the error above).
Any help would be appreciated as I have to get everything working 100% since the phone is my lifeline on the road (I know, which is why I flashed it on the road, right?).
Mordred said:
I can't write to the internal SD card anymore after doing a factory reset / full wipe and reflash (http://forum.xda-developers.com/tmo...ent/testing-debloated-dob1-rom-t3077507/page1).
The phone was working fine, the ROM is super fast and was perfect. Of course I had to flash the update to the "stable" version, right? No offense to the OP, I am sure it is just a random android glitch on my phone. Love the ROM.
Anyway, on a Mac and on the road traveling... In terminal I get the following error:
127|[email protected]:/ # fsck_msdos /storage/emulated/0
** /storage/emulated/0 (NO WRITE)
Invalid signature in boot block: 00002|[email protected]:/ #
Any ideas how I can fix this? The phone is running just fine less the write access to /emulated/0. I have tried SD fix from the market and various adb commands as well as the same or similar commands from the android terminal emulator.
In the process I was able to reformat my internal SD by mistake and therefore have no data backup (smart, I know). I am fine with starting from a factory baseline and reinstalling everything, I just need to know how to get there (eg. do something that will ensure remove the error above).
Any help would be appreciated as I have to get everything working 100% since the phone is my lifeline on the road (I know, which is why I flashed it on the road, right?).
Click to expand...
Click to collapse
Without wiping try reflashing the rom. If you have to flash an update to the rom to get the stable version you might just try reflashing that. If that doesn't work I hate to say it but go back into recovery and do a full wipe, system, data, and cache. Then reinstall rom again. Sometimes it's just as simple as a bad flash.
@Corwinder - thanks for that. I think I have tried variations of what you describe but tonight when I get back to the hotel I will have another go at it. What I can't figure is why when I re-flash or flash a backup it seems to write just fine. The error only seems to manifest after I boot into the OS.
Altamont - that is way south in the state isn't it?
Thanks again.
Mordred said:
@Corwinder - thanks for that. I think I have tried variations of what you describe but tonight when I get back to the hotel I will have another go at it. What I can't figure is why when I re-flash or flash a backup it seems to write just fine. The error only seems to manifest after I boot into the OS.
Altamont - that is way south in the state isn't it?
Thanks again.
Click to expand...
Click to collapse
Yeah, about 10 miles or so from the Oklahoma border. When people ask I normally tell them I'm about an hour west of Joplin, Mo. Just one more thing. Not sure if this would affect it but I assume your bootloader and modem are both OB1 versions. Did you have stock Lollipop on your phone at one time in other words? If so then the answer would be yes. I'm no developer but I see a lot of times when you need to have either the bootloader or the modem on the latest stock version.
Corwinder said:
Yeah, about 10 miles or so from the Oklahoma border. When people ask I normally tell them I'm about an hour west of Joplin, Mo. Just one more thing. Not sure if this would affect it but I assume your bootloader and modem are both OB1 versions. Did you have stock Lollipop on your phone at one time in other words? If so then the answer would be yes. I'm no developer but I see a lot of times when you need to have either the bootloader or the modem on the latest stock version.
Click to expand...
Click to collapse
I came from stock, yes, but I don't remember if I had to flash a new BL and modem to get to root (I was reflashing my wife's mega at about the same time). For arguments sake, say I am still stock (BL, modem)... what is your answer of yes to?
What is the logical next step?
Thanks again.
Mordred said:
I came from stock, yes, but I don't remember if I had to flash a new BL and modem to get to root (I was reflashing my wife's mega at about the same time). For arguments sake, say I am still stock (BL, modem)... what is your answer of yes to?
What is the logical next step?
Thanks again.
Click to expand...
Click to collapse
Was stock 4.4.2 or was it 5.0 Lollipop. The S5 does not come with Lollipop preinstalled or at least they weren't. The bootloader and modem you'd need would be in the stock Lollipop. So to be safe if you don't know if you were on stock Lollipop or KitKat then I would go here http://www.sammobile.com/firmwares/database/SM-G900T/ and download the version 5 listed. You would need to use Oden to flash that and then root. Then you could install your recovery and flash the rom.
Corwinder said:
Was stock 4.4.2 or was it 5.0 Lollipop. The S5 does not come with Lollipop preinstalled or at least they weren't. The bootloader and modem you'd need would be in the stock Lollipop. So to be safe if you don't know if you were on stock Lollipop or KitKat then I would go here http://www.sammobile.com/firmwares/database/SM-G900T/ and download the version 5 listed. You would need to use Oden to flash that and then root. Then you could install your recovery and flash the rom.
Click to expand...
Click to collapse
Thanks. 5.0 was pre-installed. Just bought it last month. It will have to wait for a few weeks until I get home (only travel with a Mac) unless you know a way to run odin on Mac.
Mordred said:
Thanks. 5.0 was pre-installed. Just bought it last month. It will have to wait for a few weeks until I get home (only travel with a Mac) unless you know a way to run odin on Mac.
Click to expand...
Click to collapse
Well since 5.0 was preinstalled you shouldn't need to restore a stock copy. But if you ever wanted to you can get Odin for a Mac here http://mac.softpedia.com/get/Developer-Tools/ODIN.shtml
Since it was preinstalled you have the current bootloader and modem. Just go into Recovery and do a full wipe. Not a factory reset. Wipe System, Data, cache, and Dalvik cache. After this you can reinstall that rom.
Re-occurance... NOT SOLVED
Corwinder said:
Well since 5.0 was preinstalled you shouldn't need to restore a stock copy. But if you ever wanted to you can get Odin for a Mac here http://mac.softpedia.com/get/Developer-Tools/ODIN.shtml
Since it was preinstalled you have the current bootloader and modem. Just go into Recovery and do a full wipe. Not a factory reset. Wipe System, Data, cache, and Dalvik cache. After this you can reinstall that rom.
Click to expand...
Click to collapse
Just wanted to say thanks for the responses. Back up and running and going through the fun task of reconfiguring everything. I did a clean wipe, all partitions, etc then flashed once and flashed again (first did not seem to take - hung at boot screen with notification light pulsing).
OK, back to square one. This time I figured I would "fix" the partition and managed to damage/change/corrupt the EFS partition. Now I am stuck with a fully functioning phone that nags about being in factory mode on every boot. Went to the efs folder and it did not have the two files to change, so I created them, still the same thing.
Thoughts? Should I flash back to stock and take it in for warranty?
Still on the road so anmy immediate help woould be appreciated.
Related
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Thanks for the reply!
I didn't check the MD5 last night but I did just now and it matches.
I did a cache wipe the first time but not a system wipe. Then I started getting more desperate and tried reinstalling w/ system wipes and factory resets, but it didn't change anything.
No, I didn't change the ROM. Doing the Bootloader unlock exploit was about the absolute maximum of my technical abilities! The only thing I know I did wrong was that I didn't downgrade to the old boot version the first time (mainly because the wifi thing sounded inconsequential and I didn't want to learn the procedure if I didn't have to).
Anyway, I just tried Ultimate KangBang and it seems to work--no error messages so far. I don't know what I did wrong, but hopefully this keeps working!
IceDragon59 said:
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
Click to expand...
Click to collapse
andybones said:
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Click to expand...
Click to collapse
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
franklin411 said:
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
Click to expand...
Click to collapse
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
in the future it is always good practice to backup(nandroid) your current ROM. I have been burned too many times, always do a nandroid before you do anything in recovery.
your photos are normally saved to the SD, flashing ROMs or wiping the system will not delete them
andybones said:
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
Click to expand...
Click to collapse
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
franklin411 said:
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
Click to expand...
Click to collapse
na the name has nothing to do with it. it can be named whatever.
im guessing the wipe worked.
franklin411 said:
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Click to expand...
Click to collapse
weird, i was having the same problem with the same processes stopped working. i wiped cache dalvik and system but not factory reset. once i factory reset, it worked fine. i figured a system wipe would have been enough....
OK so let me start off with, great site. I have read a ton of information.
First: Siyah 4.3.3 (Latest) Kernel which now has been put to AJK v1.48s
ROM; SHOstock3 v2.5.9
PreMod Settings: SGS2 AT&T SGH-i777. Started with GB > AT&T OTA (KIES) 4.0.3 > AT&T OTA WIFI 4.0.4 (caused huge freaking headaches with battery, charging, turn off the phone loop, battery draining, etc.)
Issues:
Original Issue posted in this thread (viewing Single Post) http://forum.xda-developers.com/showpost.php?p=39350619&postcount=18
Creepy offered something to try. That never worked as all I was able to do was download mode or stare at the Samsung Galaxy S2 Splash Screen. Well, I took to his download repository and other links and used his One-Click Recovery to stock GB Rom to make part of my phone usable, using this link here: http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
While it is Gingerbread at least my phone is usable. I want to try his STOCK ICS method but that mentions the eMMC super-brick bug.
So this is what I have tried so far. I have tried installing Siyah 4.3.3 nomswap for my kernel using Mobil-Odin Lite. That works but it never reboots or actually says finished. What it does do is stay at the wicked purple splash with the yin yang symbol. I left it like that last night until I woke up this morning and it never changed. So I rebooted the phone and the Kernel is on there. I reboot into recovery so that I can install SHOstock3 v2.5.9. That goes off flawlessly except here the last few times it won't reboot when I go to the GO BACK. It sticks and doesn't do anything. Rebooting shows the SHOstock3 Engine Boot Animation. Once it stops it goes to ask me for the encryption password. Well I put in my password (was the same one to the unlock screen) and it reboots and you see the nifty Samsung animation logo and then goes to the Samsung Galaxy S2 Animation Logo and then just stays there. It really pisses me off.
So after all that I finally put a new Kernel on there,AJK 1,48s. Pretty cool it loads up and then reboots. Well AJK shows up after the light-blue bar fills up and then goes black and the 4 touch sensitive row keys are lit up for a bit before going dark but the phone is still on. So I rebooted to recovery (CWM now with the Kernel) fixed tweaks, went to advanced and saw all sorts of options. Tried clearing caches for ROM 2 and restarting,no effect. I removed ROM 2 and went through reboot and nothing. Restored ROM 2 and nothing. Re installed SHOstock3 v2.5.9. Did the same thing after install and not backing out when I hit GO BACK. Rebooted, same scenario that happened before with requiring password. Entering password does the same thing with a reboot and then staying on Samsung Splash Screen. If I Don't enter the password and reboot,same thing happens. So after being irritated and pissed off I ran Creepy's One-Click Fix again and paid attention to the phone and noticed it mentioned not being able to access the AT&T section or partition or something like that. So while part of my phone works under normal circumstances I want to figure out how to remove that encryption part of the phone and get full access (even though full memory and space are shown under Windows 7 and the files on the phone). The password I put on there isn't taking and I don't know if using PC methods for removing encryption (which could take awhile I know) needs to be employed (and if so which methods) or if that part is just screwed and I can't put on any other kernels or custom ROMs. Perhaps tell me where I messed up. Should I try swapping the ROMs from Advanced setting in CWM Recovery? Can I try a different ROM (kernel didn't seem to help)? I have done several factory resets dalvik cache wipes cache wipes formats,etc. and it is still there. I can say that before the whole encryption debacle (even though I was encrypted I did get in my phone after encrypting it) my pin unlock for my SIM wouldn't work and I actually SIM locked my phone. Had to go to AT&T and get a new SIM and was up and running. I put a 4 digit pin lock for the SIM (it let me do it) and when I went to unlock it after a reboot, it wanted an 8 pin for the PUK and wouldn't take what I put. I tried to change the PIN but to no avail. Once that happened I guess it snowballed. Any help is appreciated. I have searched and tried some things that looked to match my issue but none have totally helped. I do have ADB set up on my wife's laptop which I use to restore my phone to GB Stock ROM. I haven't been able to reboot the phone into Bootloader to do any fastboot commands as when I tried to do it the commands just sent the phone into normal reboot (though adb reboot recovery does boot to recovery). I Haven't tried booting to the bootloader using the new Kernel though so I will wait for confirmation or additional information before I try. Thanks guys.
Eagle
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Thank you so much creepy. I will give that a try later and see how it goes. I hope the information I gave actually gives enough info. I know folks usually want enough. Ill post back my findings.
Eagle
quick follow up and what I tried
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
WarEagleUS said:
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
Click to expand...
Click to collapse
Should I try TWRP instead of CWM and if so where should I grab it from?
Status Update
So this is what I have tried so far as of this moment.
I reflashed using your Stock + Root Gingerbread ROM.
Wiped DATA and everything in recovery menu several times.
Used Kernel Wipe and ROM Nuke for extra cleaning power.
Reinstalled the Kernel AJK and SHOstock3 ROM
Haven't installed any themes though I had Johns Blue and Villians Poison Base Theme (I believe that is what it is) on there when this all went down. Should I put them back on there?
Password still pops up. So what it looks like is that unless I stick with the unencrypted portion of the phone, I am screwed with any custom ROMs as the correct password has the phone restart and then stick at the Samsung Galaxy S2 Splash Screen. Apparently I still cannot access that area of the phones memory to wipe it at all no matter what I do. I need to access it somehow. Really driving me crazy and thinking I may need to talk with AT&T(as Samsung told me to earlier this morning lol) and see what they can do.
One thing I do notice is when I use your stock root program it actually removes the encryption or decrypts the section of the phone for the stock ROM to go on the phone which is cool.
Eagle
Any other things to try from anyone is greatly appreciated.
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
WarEagleUS said:
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
Click to expand...
Click to collapse
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
creepyncrawly said:
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
Click to expand...
Click to collapse
Thx bro. yeah I need to run some forensic tools and see if I can mount the whole phone system on my PC and run the tools.
creepyncrawly said:
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
Click to expand...
Click to collapse
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
WarEagleUS said:
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
Click to expand...
Click to collapse
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
creepyncrawly said:
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
Click to expand...
Click to collapse
Yeah I should have used ADB to do that from the get go. I should have used the wife's laptop like I started to instead of my WIN 8 machine has it seems to be finicky with Android SDK (the portion at least needed to run ADB). Linux commands really aren't much different than terminal and I have done both. I was actually trying to get fastboot commands to work but my bootloader wasn't cooperating and for the life of me I couldn't find how to unlock it. I may try restoring that EFS. If nothing else I would love to be able to format that EFS and replace it with my original copy though as you said a damaged EFS may actually cause issues (who knows if it is damaged). I do know that I am fixing to chat with AT&T support. I hope I don't have to drive down to Hoover, AL to the repair facility. I would rather them send me a phone and send this one back. I am on stock 4.0.4 ICS from AT&T and any root that may be on there (though I doubt there is now) I can remove and what not
Thanks for the advice and insight Creepy. I know you tried like hell to get me an answer but in doing research on here with other problems I found out some useful information going forward my friend.
Eagle
Well, looks like I will be getting a special early upgrade and the wife will as well. I will be keeping this phone, however, to mess with this and see if I cannot get this problem fixed. Thanks Creepy so much. I appreciate your research and help more than you know. If possible I would love to keep this thread open for a while just in case I figure this out and fix the issue. It may take me a week or so but I will get back to messing with it again.
A side note. You don't need the whole sdk to get adb. You can download just the files you need from my signature.
Sent from my SGH-I777 using xda premium
This will help anyone who keeps having flashing issues.
More detailed instructions in my GUIDE!
http://forum.xda-developers.com/showthread.php?t=2295557
THIS IS ONE QUICK/SIMPLE ERROR FREE ROM FLASHING PROCEDURE
This should eliminate a few posts saying, stuck in download mode, stuck at logo. just vibrates and them MANY other issues that somehow, everyone seems to find.
Here is my quick rom flashing process I use ALWAYS (yes always)
THINGS YOU NEED ON extSDCARD
1. Extra kernels (2 or 3 you know works for your device)
2. Optional: 2 recoveries that can be flashed (I use CWM & TWRP)
3. Optional: apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
Flashing the rom: TOUCHWIZ/AOSP ROMS
1. Backup current rom (to the extsdcard)
2. Complete wipe, (I do complete, some people do not) Complete = No Issues [FACTORY RESET + CLEAR CACHE + CLEAR DALVIK CACHE + CLEAR DATA]
3. Flash the rom
4. Flash the kernel (your device kernel) (I know some roms have their own kernel) this is where your problems start.
AGAIN: FLASH YOUR KERNEL, you KNOW it works. 1 more time FLASH YOUR KERNEL. (you can experiment with other kernels after you boot)
AOSP ROMS - require you to flash gapps before you boot. [This is not required for TouchWiz roms]
5. Boot the rom.
FINISHED!!!! SUCCESS!!!
Total time to flash a rom:
7-10min
Errors - NONE
This goes for every rom in my guide.
TIPS:
This flash procedure is for Touchwiz Roms, if you are flashing AOSP roms, you must flash the gapps package associated with the rom you are flashing.
**** SGH-I337M Users: Often requires flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
[Special thanks to blyndfyre for this helpful tip].
The extra recovery I flash if a rom does not like the recovery I am using.
Yes, you can flash recoveries back and forth.
Apps.zip I flash after the rom is up & running. This I use to get the rom setup (like root explorer and others needed)
I am in no way responsible for anything that may do damage to any device - Use these tips at your own risk - period!
If you found this useful in any way, please hit the THANKS button for my effort.
RESERVED
TheAxman said:
Any questions? Anyone.
Click to expand...
Click to collapse
I've been running into a lot of issues when trying to flash different ROMs. For instance, right now I'm on CleanROM 1.6 - I just tried to install PureGv2.
Steps I took:
Have Goo and ROM Manager installed after clean install of CleanROM 1.6
Flash CWM from ROM Manager
Install Recovery Script from Goo
Reboot into recover from Goo
TWRP loads
Wipe data, cache, dalvik, etc
Install PureGv2
I forget the error off the top of my head but it doesn't install
In a nutshell I'm asking what am I doing wrong? Do I need to flash another kernel?
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
TheAxman said:
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
Click to expand...
Click to collapse
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
harrytery said:
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
Click to expand...
Click to collapse
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
TheAxman said:
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
Click to expand...
Click to collapse
Alright sounds good. Flashing back to stock later today then re-rooting
thanks for the help
Remember always do a BACKUP before you do anything.
First off, big thanks for this thread.
Now I'm running Cleanrom 1.5. If I wanted to install a new rom can someone please explain exactly what I do to go about it? As jargon free as possible would be awesome.
Sent from my SCH-I545
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Vampyre111 said:
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Click to expand...
Click to collapse
I can not stress enough HOW IMPORTANT THE KERNEL IS!
Hmm so everyone is a now a Oriental Flash Master from the far East now huh?
What recovery is everyone using?
[updated: 07-12-2013]
Flashing Questions
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
xander45 said:
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
Click to expand...
Click to collapse
did you set the permissions for the app? That should work actually. Look at one of the apps in that directory, and set the permissions the same for the voice app. Reboot and see what happens.
Good luck.
May want to post this question also in my guide thread.
http://forum.xda-developers.com/showthread.php?t=2295557
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Painterface said:
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Click to expand...
Click to collapse
Please bring the question over to my thread up above. It shows also what kernels to use. We will help there.
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
theoneknownasbob said:
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
You would flash the rom, and after, flash your verizon kernel, simple as that.
Hello Everyone,
Ok so not sure where to start, umm yesterday i decided to root my phone i have the HTC Desire C from Cricket wireless. I was successful at unlocking my bootloader and rooting the device. Now for some reason im unable to flash a custom rom or whatever to my device, not sure if im doing something wrong, but i must have screwed something up because i cant even perform a factory reset or a hard reset to the device at all, and the google play store no longer works and the sync icon never goes away. Now when i attempt to flash the custom rom the clockwork recovery tool wont allow me to do a full wipe which i believe must be completed before you can even install the roms.
any help or suggestion would be greatly appreciated.
Thank You.
Just unlocking and rooting the device should not affect how the Play Store works at all. That seems odd. What's the error? By the Clockwork recovery tool, are you referring to the Rom Manager or the actual ClockWorkMod recovery?
es0tericcha0s said:
Just unlocking and rooting the device should not affect how the Play Store works at all. That seems odd. What's the error? By the Clockwork recovery tool, are you referring to the Rom Manager or the actual ClockWorkMod recovery?
Click to expand...
Click to collapse
Actually you know what, I think i know what happened. when i was trying to flash the rom i also flashed the gapps for jelly bean into my phone which is running ice cream sandwich currently because the rom flashing failed. So basically i think the gapps apps are conflicting with the stock apps on the phone ? It seems like all the google apps are the only ones messing up and the google account sync is messing up also the google playstore and google plus crashes a lot so its only the google apps. so what do you think and how do i restore the phone ? I didnt make a back up recovery either. If someone could also just walk me through how to flash a custom rom like CyanogenMod i believe everything will probably fix its self (hopefully). oh and as for the Clockworkmod i think its the actual clockworkmod recovery the one with a black hat, i accessed it through bootloader recovery options, anyway it doesnt allow me to flash any custom roms ive tried like 3 so far and everytime it ask me for some update file or something about a update not sure.
Yep, the other Google apps is what did it. You don't need to flash Gapps on a stock rom, only for ones like CM that don't come pre-installed. Well, first off, it's good to take note of what system version and baseband version you have, in case you need to find the files for later to reflash. As far as CM, well, you might want to check on how stable a version is for your phone. Often times less popular HTC CDMA phones don't have as good of support from CM. If you just find another stock rom and install it through CWM, you'll probably be fine. Just make sure to wipe everything suggested in the install guide for the rom you pick. Some devs and roms require a full wipe including /system and some do not. ProTip : Do a backup in CWM before ever wiping /system, even your system now which doesn't work right, because if you wipe the system and the rom you downloaded doesn't work, then you will be stuck with nothing to do and at that point would need to find the RUU from HTC to restore the phone back to stock.
FYI: If you unlocked via htcdev.com, this is not a full unlock and whenever you install a custom rom that has a different kernel than what is already on the phone, then you need to extract the boot.img from the rom.zip and install it via fastboot. You should get familiar with fastboot as it is very handy for reviving the phone in a worst case scenario.
es0tericcha0s said:
Yep, the other Google apps is what did it. You don't need to flash Gapps on a stock rom, only for ones like CM that don't come pre-installed. Well, first off, it's good to take note of what system version and baseband version you have, in case you need to find the files for later to reflash. As far as CM, well, you might want to check on how stable a version is for your phone. Often times less popular HTC CDMA phones don't have as good of support from CM. If you just find another stock rom and install it through CWM, you'll probably be fine. Just make sure to wipe everything suggested in the install guide for the rom you pick. Some devs and roms require a full wipe including /system and some do not. ProTip : Do a backup in CWM before ever wiping /system, even your system now which doesn't work right, because if you wipe the system and the rom you downloaded doesn't work, then you will be stuck with nothing to do and at that point would need to find the RUU from HTC to restore the phone back to stock.
FYI: If you unlocked via htcdev.com, this is not a full unlock and whenever you install a custom rom that has a different kernel than what is already on the phone, then you need to extract the boot.img from the rom.zip and install it via fastboot. You should get familiar with fastboot as it is very handy for reviving the phone in a worst case scenario.
Click to expand...
Click to collapse
Ok Thanks for the reply, now as for the full wipe my CWM wont allow me to do this im only allowed to do a cache wipe and I believe this is why im unable to get a Rom working on my phone and this is getting very frustrating, the CWM is the latest version and TWRT wont even flash to my phone so that one doesnt work at all if you know of any others please let me know. Yesterday morning i soft bricked my phone and none of the roms are working because i believe i must perform a full wipe which i am unable to do at this time. oh and about unlocking my bootloader via htcdev.com and it not being a full unlock, do you suggest that may have something to do with the fact roms wont work on my phone and how do you do a full unlock ? oh and i tried to restore back to stock also thats not working either, I get a status 7 error when installing the roms and sometimes a status 6.
Silver5150 said:
Ok Thanks for the reply, now as for the full wipe my CWM wont allow me to do this im only allowed to do a cache wipe and I believe this is why im unable to get a Rom working on my phone and this is getting very frustrating, the CWM is the latest version and TWRT wont even flash to my phone so that one doesnt work at all if you know of any others please let me know. Yesterday morning i soft bricked my phone and none of the roms are working because i believe i must perform a full wipe which i am unable to do at this time. oh and about unlocking my bootloader via htcdev.com and it not being a full unlock, do you suggest that may have something to do with the fact roms wont work on my phone and how do you do a full unlock ? oh and i tried to restore back to stock also thats not working either, I get a status 7 error when installing the roms and sometimes a status 6.
Click to expand...
Click to collapse
Are you sure you don't have the recovery from another version of the Desire C - GSM maybe? I still don't understand what you mean when you say you can factory reset. Why not? What is the error? And sounds like at this point you should just use the RUU to return to full stock and start over.
es0tericcha0s said:
Are you sure you don't have the recovery from another version of the Desire C - GSM maybe? I still don't understand what you mean when you say you can factory reset. Why not? What is the error? And sounds like at this point you should just use the RUU to return to full stock and start over.
Click to expand...
Click to collapse
Ok not sure what the RUU is and how im suppose to use it to return to full stock, and correct i cant perform a factory reset in bootloader period, when i select factory reset it does nothing but reboot and say HTC "this build is for development purposes only do not distribute outside of htc without written permission. Failure to comply may lead to legal action." then it stays like that and nothing else happens period, not sure what im doing wrong but no worries im going to buy a new phone tomorrow and never use custom roms again, if i want a upgrade ill just go out and buy a new phone which i should have done in the first place, only thing ill be doing is rooting my devices for now on and nothing more thank you for your help.
Well, once you have a custom recovery, you don't factory reset from the bootloader screen, but via the recovery itself. That's one of the main reasons for the recovery - better options to wipe the phone as well as backing up, restoring, and flashing the custom stuff. Not saying you shouldn't buy another phone, but no reason to give up on this one. I just think it would require a bit more reading since you don't see very familiar with what to do with CWM after you installed it. Have you even booted INTO CWM?
tl;dr - Can't seem to find my way out of a software brick. Have sideloaded the stock OS from 1+ but still forever getting the spinning dots or fastboot screen, depending on which mode i boot into.
Hi all. Signed up to make this thread, but i've been lurking for years.
I have a OnePlus X that is about the least modded smartphone i've ever owned. I've never been pleased enough with a retail product that i didn't feel compelled to strip out the bloat and start over, until this phone. Other than stock, i've just got a gallery app, some apps for manipulating text files or compiling code, couple games, and social media apps.
Anyway, a few days ago i got a notification about a software update. Downloaded. Installed. Updated. No problem.
Maybe yesterday or the day before, it showed up again. This morning i downloaded, installed, and suddenly i have apps closing. It's been over 12 hours so i'm hazy on how it all started, but i was getting something like "package installer" errors when attempting to open some apps. Same deal when i went to adjust permissions of those affected apps. Every time i unfocused a box that had pulled up swype, i would get an error message saying swype crashed or closed or something.
So i started uninstalling third party apps (i don't keep many, and most i've had for years so i think they're probably trustworthy). Same deal. Started uninstalling updates to google apps. Same deal. Went to uninstall and reinstall some non stock apps that i'd kept previously. Nothing.
I went to cook breakfast while an app was reinstalling, and i came back to a red dot on my screen with two white dots chasing each other around it. From what i'm reading that's a sign of a bootloop or software brick. I've taken all steps i could find, including wiping cache and sideloading a fresh stock OS, but to no avail.
Is it that i've ruined my google apps somehow and need to restore them? How would i even go about figuring out what the problem is? Any advice or guidance is appreciated
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
"A09" said:
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
Click to expand...
Click to collapse
I have wiped cache, deleted data, tried a factory reset in the stock bootloader, and i have used ADB to sideload a full stock rom (not upgrade package) that i downloaded from OnePlus.
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Exodusche said:
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Click to expand...
Click to collapse
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
jtg1984 said:
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
Click to expand...
Click to collapse
Fastboot flash easiest way. Make sure it's the old recovery from 2.2.2. Not the new mm stock recovery.
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
I m not a dev, i m a newbie like you. i hv done a lot of experiments with my oneplus-x, as for u the first update u got few days back should be oos 3.1.2 and the one u got 2 days before should be 3.1.3. When u upgrade from lollipop to marshmellow, even your stock recovery got upgraded to latest version, which is something different from old lollipop recovery.
You said you have access to recovery mode. thts pretty much gud, what u can do is that wipe data and cache through stock recovery and do a clean install of oos 3.1.3. I ll be providing all the necessary links down below. If you need assistance with fastboot cmds and anything feel free to ask.
Thanks to original link provider @Sachin7843
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.3 link - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
8. For Stock MM Recovery - http://forum.xda-developers.com/oneplus-x/general/oxygenos-3-1-0-marshmallow-community-t3445043
Sorry for my bad english
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
Don't sideload it, use fastboot to flash it. "Fastboot flash recovery name.img" - without he quotes and the image name.
Sorry for vanishing. Had a busy week.
Not sure what happened the first time i tried to put the 2.2.3 image on the SD card, because the file didn't show up in my recovery, but i tried again later (after giving up on flashing the old recovery, since i couldn't figure out how to do that in recovery) and managed to do a clean install of the older OOS version.
That did the trick, and after booting up, my phone proceeded to update again - this time without any crashes or errors with my apps afterward. The phone still does the red dot with the white dots chasing around it when it boots up, which must be the new boot screen. It also seems to stay on that screen for much longer than it stayed on the old morphing shape boot screen, but it still boots up reliably now after 30-60 seconds rather than freezing in boot forever.
I've since enabled dev mode on my phone. Is that going to be enough to enable ADB commands from recovery? I kind of like that i've kept my phone stock, so i'll leave it that way if i can, but it would have been much easier to fix this problem if i'd had access to most of my debug commands. As it was, without dev mode and in the standard recovery, it seemed that sideload was the only command i was able to use, and only when the phone was requesting a sideload over usb