Hello all,
I want to give my friend my Galaxy Note. Due to this, I attempted to do a factory reset from the settings menu, but it would reboot to TWRP instead and get locked in a boot screen. I tried flashing a third-party ROM (CM), but stupidly forgot to wipe the device since I thought I had done it before, resulting in it hanging at the boot animation. Could someone point me to the right direction on how to restore the device to Stock using a tool like Odin? Thanks.
P.S. Does anyone know how to get into TWRP? I can't seem to find a key combination, I have to do it from the TWRP application (yet I can't access the application).
UPDATE: I have managed to get into TWRP, however restoring fails, as it goes back to the TWRP logo. Wipe also does not work.
Solved, what I did was flash a recovery via Odin, which resulted in an error. Kies detected it since it had an error, so it was able to be restored.
Related
While I did find a similar posts, they were for different devices. I also tryed to search o different sites for similar problems to no avial.
What Happened: After backing up system data and app data then removing Foxhound ROM with factory reset, and installing UltimaROM i came to find that the modem did not install correctly result in no connection to my cell network. I booted into TWRP recovery to try and do a re-install of the ROM only to find that TWRP was restarting itself every 3 seconds or so. I attempted to restart the device which i found to result in a TWRP bootloop that i cannot get out of, it constantly is booting into recovery mode and i cannot get it restart the OS.
What I've tried: Since i can get into download mode i decided to attempt to re-install TWRP using Samsung Galaxy S3 Toolkit but since i do not have USB debugging on i cannot do that. I'm mainly looking for a fix before i go and claim it on the warranty saying update went bad or something. If people need more information I will try to provide it as best i can.
Summery if i confused people is that TWRP is in a bootloop, i am unable to get to the OS, but i still have download mode available.
I fixed it but not how I would have liked to. I ended up losing all data due to flashing stock ROM using ODIN. I would still much appreciate a alternative method that does not involve loss of data though just for future reference, that is if anyone knows a alternative method.
Sent from my GT-I9300 using xda app-developers app
could've tried reflashing TWRP or any other recovery through odin
I have an LG Optimus Q (LGL55c) with twrp loop. I was trying to go back to stock rom, instead I deleted all the system files in twrp when it was working...Then I rebooted back into recovery and get the loop. Does this mean I completely bricked my phone? I tried using adb, adb shell doesn't work. It does find the device. Even tried the LG update with no sucess Any ideas or suggestions?
I just read the forum title, I thought this was for the Optimus Q not the Samsung S3. Sorry mods
Temasek unofficial cm12 5.02
I was running this rom when my power button shorted and I got it replaced but then I tried to do a complete wipe and clean flash but since then it has been twrp bootlooping, tried to flash the latest recovery through Odin but still doesn't work also tried stock firmware flash but says binary not available.
This is my secondary device and I've not been in touch with Odin for a while. Any help will be appreciated.
Thanks
Download latest firnware from sammobile.com and flash it with Odin, as described on sammobile: does Odin finish with '1 succeeded'?
I'm in a very similar situation, but with my Samsung Galaxy Note 2 (N7105). It's rooted, and I am, or was using TWRP 2.7.0.2. ROM is CyanogenMod 12, 5.0.2 Lollipop.
I did a factory reset from INSIDE Android, and chose to wipe internal memory. Phone did the reset and wipe, rebooted into TWRP instead of Android, and now I have TWRP boot loop.
I posted more about it here: http://forum.xda-developers.com/showpost.php?p=60247503&postcount=3671
I have the Problem toooo!
What must i do Now!
with my S3 is the same!!!
For posterity:
With an old (2014?) version of TWRP and a custom ROM, I tried reverting to factory settings. That caused the phone to reboot TWRP, and the screen would flash every couple of seconds. I flashed a stock recovery image I found on Google, and when it restarted again, the wipe was completed successfully. My intention was to wipe all user data anyways so I can't say if this method might save it.
Hey guys! I had recently installed an Android 4.5 rom on my Samsung Galaxy S i9000, but I didn't really like it, so I went back to clockwork mode and restored the backup (which I am pretty sure I had saved prior to installing the rom). What happened then was that I couldn't power on my device. It literally gets stuck on the Samsung Galaxy I9000 startup screen. I can however access download mode and I can access clockword mode recovery. BUT, when I try to install another update with clockword mode recovery or trying anything on cwmr for that matter (factory reset, cache reset, anything...), I get the error message: Unknown path to /sdcard and I am stuck at this. Can anyone tell me how to fix this issue? Please, I need help quickly!
I would just restore with official firmware via Odin and restart the process. This will set everything back right so you can have a fresh start. http://forum.xda-developers.com/showthread.php?t=1102881
Hello, I need a little advice on getting my phone working again. I got a new Ramos MOS1 Max today and rooted it via Kingo PC software. I checked to make sure it was rooted using RootChecker and it said it was rooted. I was reading up on what to do next and some sites said the next thing you must do is to make a backup of your phone via TWRP. I installed the software and then attempted to use the "reboot and create backup" functionality. The phone rebooted and I was in the Android system recovery menu. I didn't see anything like what TWRP was supposed to show, so I just rebooted via the standard recovery screen method. Now when I try to start the phone, it gives me a logo, then ARMPHONE and it hangs on that.
I've tried wiping my cache partition via recovery menu and rebooting, but no dice. Next they suggested to do a wipe data/factory reset, and since I just received the phone today, I decided to try that. After doing that via system recovery menu it still wouldn't boot past the ARMPHONE screen. I don't have a lot of experience with rooting and modifying Android devices, is there something I can do to fix this? I've installed the android SDK tools for my version of android (5.1 I believe), but I don't know how to proceed. Is there a stock image I can use for this phone, or can I just use a vanilla android image?
Thanks in advance.
sphericon said:
Hello, I need a little advice on getting my phone working again. I got a new Ramos MOS1 Max today and rooted it via Kingo PC software. I checked to make sure it was rooted using RootChecker and it said it was rooted. I was reading up on what to do next and some sites said the next thing you must do is to make a backup of your phone via TWRP. I installed the software and then attempted to use the "reboot and create backup" functionality. The phone rebooted and I was in the Android system recovery menu. I didn't see anything like what TWRP was supposed to show, so I just rebooted via the standard recovery screen method. Now when I try to start the phone, it gives me a logo, then ARMPHONE and it hangs on that.
I've tried wiping my cache partition via recovery menu and rebooting, but no dice. Next they suggested to do a wipe data/factory reset, and since I just received the phone today, I decided to try that. After doing that via system recovery menu it still wouldn't boot past the ARMPHONE screen. I don't have a lot of experience with rooting and modifying Android devices, is there something I can do to fix this? I've installed the android SDK tools for my version of android (5.1 I believe), but I don't know how to proceed. Is there a stock image I can use for this phone, or can I just use a vanilla android image?
Thanks in advance.
Click to expand...
Click to collapse
You can find the firmware here http://4pda.ru/forum/index.php?showtopic=783029
TL; DR - explanation of issue; can you sideload TWRP via ADB?
I have a busted Galaxy S6 that won’t allow me access to do anything easier or more practical. My first thought was to root the phone to get inside that way, pull off the stuff I (well, really my mom - this is hers) want, and be done with it.
I originally tried flashing OJ9. This was successful but the phone became stuck in a boot loop. I tried to flash stock firmware but got a few different Odin error messages depending on the fixes I tried:
- first NAND write start (complete operation failed), this was when trying to flash TWRP
- then one suggesting there was a PIT issue - I don’t remember the exact message but it’s written down. This was when flashing stock ROM
- then back to the NAND crap when I tried to flash TWRP again.
We tried a factory reset, thinking it might be tricked into letting us in that way (I tried to flash the stock ROM again after that too). We have wiped the cache.
The most we can do is get it to the stock recovery screen. My thought now is to try to sideload TWRP through ADB, since the only time my computer recognizes the phone as a device is during this part. Is this even possible? I can’t find zip files for TWRP.
i was restoring an twrp and rom that i backed up while attempting to root my phone and installing another stock rom, i was unable to install the this rom and so i tried to restore the previous files using twrp, now my phone is stuck in a bootloop (stuck with the space having just the android logo)with me unable to access the recovery or the phone in any other way. i am also unable to initialize a soft or hard reset.
i am pretty new to this and do not know what to do further.
i did what was referred to me on the link given below
https://forum.xda-developers.com/nokia-1/development/unlocking-rooting-nokia-1-stock-rom-t3832230
and things went wrong trying to install this rom
https://forum.xda-developers.com/nokia-1/development/rom-ta-1060-stock-oreo-8-1-t3809578
Please kindly let me know how i can fix this problem
Thank you