Stuck at CWM recovery, cannot browse menu. - Android Q&A, Help & Troubleshooting

Alright.
I have a Cambridge Sciences Star PAD 3g.
I tried to root my phone and install cwm via playstore app.
Now it switches on and goes straight to the cwm recover 5.5.0.4 but the only option selectable in the menu it's the reboot system now. When I click on the volume up or down in order to browse , the tablet just reboots.
On the bottom of the screen it appears:
CWM-based recovery v5.5.0.4
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open/cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open/cache/recovery/last_log
I cannot access the android OS nor can I put the phone in download mode.
Please help me, I am desperate.

No one can help?

aeshma said:
No one can help?
Click to expand...
Click to collapse
Install stock firmware and if you really want to root and CWM your device give me the kernel source, boot.img and recovery.img

nagalun said:
Install stock firmware and if you really want to root and CWM your device give me the kernel source, boot.img and recovery.img
Click to expand...
Click to collapse
Thanks for the reply.
I cannot boot into the os anymore, how am I going to give you the kernel source, boot.img and recovery.img?
I tried to recover it with Heimdall, I installed the driver on the pc and the pc recognized it as A10 but when I click on the check device it gives me an error and says that it did not recognize any device in download mode (when I connect it to the pc, the tablet screen is in cwm recovery mode , the only one accessible).

Download the firmware from the official website of your manufacturer

nagalun said:
Download the firmware from the official website of your manufacturer
Click to expand...
Click to collapse
There is no such thing on the Cambridge sciences website.

Related

Rezound Stuck on HTC Screen - Will not Boot. No Access to Recovery

Bricked my HTC Rezound trying to root it today. Need help installing stock RUU, but how do i do this. Push it to my phone with ADB while in fastboot? And if thats how, how is this accomplished? I can only access the bootloader/fastboot.
What exactly were you doing when this happened?
I was in aman ra recovery and i thought i was rooted. I also thought i had done a nandroid backup earlier, but apparently not. I flashed cleanrom, and when i rebooted, it got stuck on the white htc screen
If you are unlocked then just flash the kernel in fastboot.
If you are trying to install cleanrom 4.0 you need to run the leaked ruu first.
Sent from my ADR6425LVW using xda premium
Its literally too late for any of that. I can only access the bootloader or fastboot. There is no recovery installed now because it was only the temp one. If i had a way to get the stock ruu on the storage so it installs in the bootloader, then i may be able to fix my rezound, correct?
do you understand what brick means???
you are simply having user error.
Please re-name this thread!
andybones said:
do you understand what brick means???
you are simply having user error.
Please re-name this thread!
Click to expand...
Click to collapse
I apologize, but last time i checked a phone that doesnt boot is a bricked phone, whether it was user error or a problem with the device that caused it?
mdunn1066 said:
I apologize, but last time i checked a phone that doesnt boot is a bricked phone, whether it was user error or a problem with the device that caused it?
Click to expand...
Click to collapse
When your phone is bricked it literally means its a brick that won't bee good for anything than a paper weight
Your case, all you need to do is flash a new kernel
Sent from my ADR6425LVW using Tapatalk
superchilpil said:
When your phone is bricked it literally means its a brick that won't bee good for anything than a paper weight
Your case, all you need to do is flash a new kernel
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Thank you for clarifying. Can you help me do this?
Also. Wouldn't it be possible to just fastboot oem lock, then put the RUU on an sd card using an sd card reader, and enter hboot and install that way?
Why do that? If you can fastboot oem lock, why not put the boot image that is in the PH98IMG.zip file, in the same directory as fastboot then type fastboot flash boot boot.img. Now you have your kernel installed.
EmerikL said:
Why do that? If you can fastboot oem lock, why not put the boot image that is in the PH98IMG.zip file, in the same directory as fastboot then type fastboot flash boot boot.img. Now you have your kernel installed.
Click to expand...
Click to collapse
Because I am inexperienced with ADB still and did not know i could, or how, to do that.
So far it looks to be working as its booting up, thanks a million. I feel sheepishly inexperienced but i guess we all start and learn somehow, right?
Yes we all start somewhere. It isn't the end of the world, live and learn.
Am having the same issue here
jmalone1187 said:
Am having the same issue here
Click to expand...
Click to collapse
I was able to fix mine by going to fastboot on the phone, going into the actual zip file that was the rom i flashed on my pc, and extracting the file named boot.img into my adb folder and then in the command window with the phone connected to the pc and in fastboot mode typing fastboot flash boot boot.img
Can you explain this process in a bit more detail?
I'm kind of new to HTC and not familiar with all the terms yet. Same thing happened to me trying to get the ICS leak on my phone.
I'm not familiar with ADB, and have minimal familiarity with ADB.
Am also having the same issue here
---------- Post added at 05:05 AM ---------- Previous post was at 04:38 AM ----------
my steps:
1 anlock from htcdev.com
2 re-lock bootloader
3 flash leaked RUU 3.11.605.22
4 unlock again
5 flash Amon Ra recovery
6 flash Scott's CleanROM ICS Edition Version 4.0
- enjoyed the week
- wanted to flash another rom
I put on the SD card RezROM_ICS_v3.1.zip and began to flash, forgetting the first re-lock, flash leaked RUU 3.11.605.22, unlock and then flash RezROM. (isn't it?)
Phone rebooted and there was a white HTC screen and nothing more.
Then I tried to fix it and flash leaked RUU 3.11.605.22 again (re-lock, put on the SD card PH98IMG.zip, flash, but after reboot I got the same white HTC screen and nothing)
pls someone could instruct me on the right path?
which means in Amon Ra recovery:
E: Can't mount /dev/block/mmcblk0p36 (File exists)
E: Can't mount CACHE: recovery/command
E: Can't mount /dev/block/mmcblk0p36 (File exists)
E: Can't mount CACHE: recovery/log
E: Can't open CACHE: recovery/log
E: Can't mount /dev/block/mmcblk0p36 (File exists)
and so after each attempt to flash any ROM
I can not understand what I do? pls help
Try pulling the battery & SD card, power up without SD. Do a factory reset. Are you currently in an unlocked state with a fresh .22 RUU installed?
Snuzzo said:
Try pulling the battery & SD card, power up without SD. Do a factory reset. Are you currently in an unlocked state with a fresh .22 RUU installed?
Click to expand...
Click to collapse
now I can not really answer, because that I have tried many options to fix this.
I tried it, power up without sd card and battery - factory reset. but in recovery still:
E: Can't mount /dev/block/mmcblk0p36 (File exists)
E: Can't mount CACHE: recovery/command
E: Can't mount /dev/block/mmcblk0p36 (File exists)
E: Can't mount CACHE: recovery/log
E: Can't open CACHE: recovery/log
E: Can't mount /dev/block/mmcblk0p36 (File exists)
in fastboot following info:
TAMPERED
RELOCKED
Security Warning
VIGOR PVT SHIP S-ON RL
HBOOT-2.21.0000
RADIO-1.22.10.0310r/1.22.10.0308r
OpenDSP-v13.6.0.7611.00.0101
eMMC-boot
Mar 11 2012
I also tried to flash original RUU_Vigor_VERIZON_WWE_2.01.605.11_Radio_RS_0.95.00 .1123r_3161E_9K_QMR_release_233635_signed.exe, but when I click the button to proceed and I get an error message stating it failed due to an invalid signature.
You can't RUU backwards and you need to re-unlock before attempting to flash another rom.

[Q] problem with install ROMS on HTC LEGEND

Hi,
I have a HTC LEGEND
and when i try to install a ROM it says:
install from sd card....
finding update package....
opening update package....
verifying update package....
E:failed to verify whole-file signature
E:signature verification failed
installation aborted.
I have already Unlock Bootloader
and my HBOOT-1.02.000
AND S-ON
could any one help me or i will Throw it in the trash.
with my all respect.:angel:
h_asa_n said:
Hi,
I have a HTC LEGEND
and when i try to install a ROM it says:
install from sd card....
finding update package....
opening update package....
verifying update package....
E:failed to verify whole-file signature
E:signature verification failed
installation aborted.
I have already Unlock Bootloader
and my HBOOT-1.02.000
AND S-ON
could any one help me or i will Throw it in the trash.
with my all respect.:angel:
Click to expand...
Click to collapse
update your recovery, download ROM Manager and flash the latest CWM recovery..
homi3kh said:
update your recovery, download ROM Manager and flash the latest CWM recovery..
Click to expand...
Click to collapse
I have already try and download cwm ROM manager 5.0.2.0 BUT MY LEGEND shows phone with an (Exclamation point) on the recovery mode.
h_asa_n said:
I have already try and download cwm ROM manager 5.0.2.0 BUT MY LEGEND shows phone with an (Exclamation point) on the recovery mode.
Click to expand...
Click to collapse
when in that exclamation mode, hold down Volume up + Power, it will open the default HTC recovery.
homi3kh said:
when in that exclamation mode, hold down Volume up + Power, it will open the default HTC recovery.
Click to expand...
Click to collapse
Afterward, be sure to choose to apply update.zip so that you may open CWM properly.
Asovse1 said:
Afterward, be sure to choose to apply update.zip so that you may open CWM properly.
Click to expand...
Click to collapse
You have updated to Hboot 1.02 and are bootloader unlocked, you can no longer use update.zip on the sdcard to boot into recovery, the only way i know to do it is to flash the recovery.img.
goto http://forum.xda-developers.com/showthread.php?t=1290841
and follow the S-off instructions.
Oh wow whoopsie, I've been very out of the loop. Thanks for correcting me!
Sent from my HTC Legend using xda app-developers app

[Q] HELP AMONRA RECOVERy ERROR

i have amonra 3.15 and im getting this error on my s-on rezound
E: can't mount /dev/block/mmcblkp36 ( File exists )
The only thing i did wrong when flashing a rom last night was that i did toggle MS-mount or something like that i mounted my int-sd to my pc and booted into bootloader from fastboot to flash boot.img without disabling the mount now im stuck help meeeee!!!
im using hasoon2000's toolkit 2.1
also says
E:Can't mount CACHE:recovery/log
E:Can't mount CACHE:recovery/command
fixed it i had to flash another recovery (TWRP) and format cach

[Q] TWRP will not mount or recognize OS

After I installed EnergyRom I have been having issues with TWRP (not blaming EnergyRom). I was trying to make a backup and I kept getting an error stating my SDcard did not have enough space (tried both internal and external, both had plenty of space). I tried another SD card, even reformatted it, but to no avail.
I then upgraded TWRP 2.2 to 2.4 and then TWRP got really funky. It no longer recognizes or lists any files, keep getting unable to mount errors, and will not let me reboot, giving an error message 'No OS found'. But when I manually reboot everything seems to work just fine.
Just updated to 2.5 and same exact issue(s). It also wont let me save the log file, so I am writing here:
E: Unable to find partition size for '/misc'
E: Unable to find partition size for '/staging'
E: Unable to find partition size for '/data'
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
Updating partition details...
E: Unable to mount '/system'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E:TNFunc::Copy_Log -- Can't open destination log file: '/cache/recovery/log'
E: Unable to set emmc bootloader message.
E: Unable to mount '/cache'
Updating partition details...
E: Unable to mount '/system'
E: Unable to mount '/cache'
Any help would be greatly appreciated.
SS823 said:
After I installed EnergyRom I have been having issues with TWRP (not blaming EnergyRom). I was trying to make a backup and I kept getting an error stating my SDcard did not have enough space (tried both internal and external, both had plenty of space). I tried another SD card, even reformatted it, but to no avail.
I then upgraded TWRP 2.2 to 2.4 and then TWRP got really funky. It no longer recognizes or lists any files, keep getting unable to mount errors, and will not let me reboot, giving an error message 'No OS found'. But when I manually reboot everything seems to work just fine.
Just updated to 2.5 and same exact issue(s). It also wont let me save the log file, so I am writing here:
E: Unable to find partition size for '/misc'
E: Unable to find partition size for '/staging'
E: Unable to find partition size for '/data'
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
Updating partition details...
E: Unable to mount '/system'
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E:TNFunc::Copy_Log -- Can't open destination log file: '/cache/recovery/log'
E: Unable to set emmc bootloader message.
E: Unable to mount '/cache'
Updating partition details...
E: Unable to mount '/system'
E: Unable to mount '/cache'
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Please tell me you didn't flash a normal twrp on the new 4.2.1 bootloader.
It would appear that you're recovery isn't compatible with your bootloader, or device all together. It also may be worth asking how you arrived at your new rom -
1. Initial steps, flashing recovery, etc
2. Clearing caches, factory resets, wiping x3, etc
3. Flash new rom, reboot let settle.
If you've just moved to the custom rom, and the recovery was working fine prior to the new rom, list what you were coming from and going to, maybe I can help. I'm not intimately familiar with the Eee Pad but hopefully we can figure this out.
milestoneiii said:
It would appear that you're recovery isn't compatible with your bootloader, or device all together. It also may be worth asking how you arrived at your new rom -
1. Initial steps, flashing recovery, etc
2. Clearing caches, factory resets, wiping x3, etc
3. Flash new rom, reboot let settle.
If you've just moved to the custom rom, and the recovery was working fine prior to the new rom, list what you were coming from and going to, maybe I can help. I'm not intimately familiar with the Eee Pad but hopefully we can figure this out.
Click to expand...
Click to collapse
You don't need to figure it out mate.. I know exactly what he has done.
My post above wasn't really a question. That is what he has done.
JB TWRP
flumpster said:
You don't need to figure it out mate.. I know exactly what he has done.
My post above wasn't really a question. That is what he has done.
Click to expand...
Click to collapse
I upgraded the bootloader to 4.2 when I updated to Energy ROM. It was working just fine (the ROM is still working just fine), I was able to make a back-up. A few days later I wanted to flash another ROM, went to make a backup and then (see initial post). All the TWRP updates I did (2.4 and 2.5) are the JB blobs. When you say 'normal' bootloader what exactly do you mean, ICS?
SS823 said:
I upgraded the bootloader to 4.2 when I updated to Energy ROM. It was working just fine (the ROM is still working just fine), I was able to make a back-up. A few days later I wanted to flash another ROM, went to make a backup and then (see initial post). All the TWRP updates I did (2.4 and 2.5) are the JB blobs. When you say 'normal' bootloader what exactly do you mean, ICS?
Click to expand...
Click to collapse
When you had the first problem that would have been some silly problem. What came next is the problem.
Energy and Hairybeans new versions are using the 4.2.1 bootloader. The versions of TWRP for ICS and Jellybean are not compatible with the 4.2.1 bootloader and gives the error you describe where nothing can mount.
There are loads of people over on the TF300 forums who have done the same and bricked.
In the 4.2.1 upgrade zips that NRG and myself provide there is a custom version of TWRP included that will work on the new 4.2.1 bootloader.
On my thread (Hairybean) I have warnings all over the first post telling people not to install a "normal" version of TWRP onto the 4.2.1 bootloader and to use the downgrade zip if they want to go back to 4.1.1 bootloader and normal TWRP.
Have a read of my last few posts on here and see if any of the ways will fix you. http://forum.xda-developers.com/showthread.php?p=40141480#post40141480
I will probably have to supply you with the Modded TWRP for 4.2.1 in blob file format also. If you need it let me know.
Thanks Flumpster. I was careful to use the Energy update but obviously lacked some common sense when updating the TWRP. If you wouldn't mind passing the modded TWRP blob I'd appreciate it. Can I extract it from your hairybean update zip?
SS823 said:
Thanks Flumpster. I was careful to use the Energy update but obviously lacked some common sense when updating the TWRP. If you wouldn't mind passing the modded TWRP blob I'd appreciate it. Can I extract it from your hairybean update zip?
Click to expand...
Click to collapse
No because that blob file contains the bootloader, recovery and partition table all in one.
I will be at my computer in 20 mins and will upload it here.
---------- Post added at 07:21 PM ---------- Previous post was at 06:48 PM ----------
Here is the blob recovery file for 4.2.1 bootloader.
http://flumpster.lolcakes.com/android/twrp.blob
Either try going into fastboot mode and doing the following (on 4.2.1 you are straight in fastboot when you see the 3 icons). Make sure you have fastboot drivers installed from naked drivers thread.
fastboot -i 0x0b05 flash recovery twrp.blob
If this doesn't work and you don't get a blue line filling after the flash then try the following. Move the twrp.blob to the root of the internal sdcard on prime and then from terminal emulator in android.
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot normally (NOT to recovery) to complete installation.
Flumpster, thanks TWRP works fine and am backing up now. I still have the same issue of it saying I do not have enough room on my external, though I have over a gig of extra room, I am just going to save to the internal and then transfer it.
Any idea why it reads only part of my external?
Anyway, thanks again!
Wow Flumpster, I'm impressed with your helpfulness and willingness to lend your development skills! It's hard to find people willing to simply explain where someone goes wrong and provide them with the tools to correct it so efficiently. Hats off to you sir!
Sent from my SAMSUNG-SGH-I957 using Tapatalk 2
milestoneiii said:
Wow Flumpster, I'm impressed with your helpfulness and willingness to lend your development skills! It's hard to find people willing to simply explain where someone goes wrong and provide them with the tools to correct it so efficiently. Hats off to you sir!
Sent from my SAMSUNG-SGH-I957 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, Flumpster, big thank you!
Cheers
SS823 said:
Yeah, Flumpster, big thank you!
Cheers
Click to expand...
Click to collapse
You're welcome mate.. Glad it's all sorted.
flumpster said:
No because that blob file contains the bootloader, recovery and partition table all in one.
I will be at my computer in 20 mins and will upload it here.
---------- Post added at 07:21 PM ---------- Previous post was at 06:48 PM ----------
Here is the blob recovery file for 4.2.1 bootloader.
http://flumpster.lolcakes.com/android/twrp.blob
Either try going into fastboot mode and doing the following (on 4.2.1 you are straight in fastboot when you see the 3 icons). Make sure you have fastboot drivers installed from naked drivers thread.
fastboot -i 0x0b05 flash recovery twrp.blob
If this doesn't work and you don't get a blue line filling after the flash then try the following. Move the twrp.blob to the root of the internal sdcard on prime and then from terminal emulator in android.
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot normally (NOT to recovery) to complete installation.
Click to expand...
Click to collapse
The 2nd solution works for me.... You are the man flumpster... !! :good::good:
Thank you
flumpster said:
No because that blob file contains the bootloader, recovery and partition table all in one.
I will be at my computer in 20 mins and will upload it here.
---------- Post added at 07:21 PM ---------- Previous post was at 06:48 PM ----------
Here is the blob recovery file for 4.2.1 bootloader.
http://flumpster.lolcakes.com/android/twrp.blob
Either try going into fastboot mode and doing the following (on 4.2.1 you are straight in fastboot when you see the 3 icons). Make sure you have fastboot drivers installed from naked drivers thread.
fastboot -i 0x0b05 flash recovery twrp.blob
If this doesn't work and you don't get a blue line filling after the flash then try the following. Move the twrp.blob to the root of the internal sdcard on prime and then from terminal emulator in android.
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot normally (NOT to recovery) to complete installation.
Click to expand...
Click to collapse
Thanks for this flumpster it saved my aaaaaaasssss! The 2nd method worked for me.
alfalvarez81 said:
Thanks for this flumpster it saved my aaaaaaasssss! The 2nd method worked for me.
Click to expand...
Click to collapse
Flumpster - YOU ARE THE MAN! Your first solution worked like a charm for me. I have been stumped as to how to fix this problem and now I am able to create a backup, root, and flash CM 10.1!
Cheers!
same issue, cant work around it
I did the same thing, installing a newer generic twrp and get the same password prompt. I have one more wrinkle though that fastboot isnt working normally. I get twrp 2.6 on every boot. I cant do anything with the partitions, it cant enumerate the partition size or it cant mount them. I can push things to tmp and it sees them, but it wont flash them successfully.
When i force it into fastboot, if i try to flash something, the command line appears like everything is ok, but the prime has hung at some point. Thats what happened when i tried method 1.
If i force it into fastboot and then load android, the system boots. I then tried the second method i get no errors and it looks like it all succeeded. After it tries to reboot, it dumps back into twrp.
I was thinking of trying rom manager to flash the recovery back, but havent used it before and i dont know if i can pick the recovery you've given out here.
anyone have a tip to help?
thanks
same issue, some progress (sorta)
I erased my recovery partition through fastboot and tried to flash the trwp.blob here to it. My prime hung. On reboot though it booted into android just fine, my fastboot was fine as well. I can get into fastboot through the normal process, but i have no recovery. when i try to load recovery i get a unrecoverable boot error.
So next is i am going to try to verify i have or have no recovery partition and then recreate it and try to flash twrp back into it.
help
I am having same problem with prime. Every time I reboot it goes to twrp. 2.6 asking for password, and does not recognize any internal memory or sd card. how ever I can use adb reboot-bootloader, and do a cold boot to Linux and everything works just fine..I would like clarification on your instructions on how to repair. I'm just a novice. Any help will be greatly appreciated.
carlkelly176 said:
I am having same problem with prime. Every time I reboot it goes to twrp. 2.6 asking for password, and does not recognize any internal memory or sd card. how ever I can use adb reboot-bootloader, and do a cold boot to Linux and everything works just fine..I would like clarification on your instructions on how to repair. I'm just a novice. Any help will be greatly appreciated.
Click to expand...
Click to collapse
I dont know that i've actually fixed anything or just traded one problem for another. I cannot get a recovery flashed onto my device. My system boots normally and fastboot works, but nothing ive come up with will flash a recovery.
On a brighter note, my system is faster, it hasnt bogged down and lagged like it always has. That may be just because of the wiping caches and such though.
What i did was erase my recovery partition from fastboot.I've recreated it, i can see it in root explorer. Its about 420mb in size, i dont know if that size is correct. The only things in it are a couple of log files.
my whole point in messing with this again was to try to flash the newest CM on it. bluetooth is a bit wonky on mine and i hoped a newer stack would help.
good luck. If i get a working recovery, i will post.
I've got the same issue here, except i have a TF300T. I've downloaded the right blob now (4.2 for the TF300)
the adb devices command shows my TF300T.
Im just wondering now, how do I transfer the file to the 'internal sd card' of the tablet and access it if all i can do is entering the twrp recovery?
thanks in advance.
EDIT: Found a way to delete the wrong recovery and now im able to access the fastboot mode ok. However, the tablet freezes everytime I use the flash command on fastboot...
flumpster said:
No because that blob file contains the bootloader, recovery and partition table all in one.
I will be at my computer in 20 mins and will upload it here.
---------- Post added at 07:21 PM ---------- Previous post was at 06:48 PM ----------
Here is the blob recovery file for 4.2.1 bootloader.
http://flumpster.lolcakes.com/android/twrp.blob
Either try going into fastboot mode and doing the following (on 4.2.1 you are straight in fastboot when you see the 3 icons). Make sure you have fastboot drivers installed from naked drivers thread.
fastboot -i 0x0b05 flash recovery twrp.blob
If this doesn't work and you don't get a blue line filling after the flash then try the following. Move the twrp.blob to the root of the internal sdcard on prime and then from terminal emulator in android.
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot normally (NOT to recovery) to complete installation.
Click to expand...
Click to collapse

Any Help Please: Unbrick my Moto E XT1021

Hello everyone,
I am trying to unbrick my Moto E XT1021 but so far nothing work. Here are the infos:
Status: Device is unlocked (Status Code: 3), rooted, and CWM Recovery (v6.0.4.9) is installed.
Initially, I installed Kitkat Rom from this link https://www.youtube.com/watch?v=w7S5WmlPgrI, but after finishing, OTA showed me an update to 5.0.2, which I did. Everything work fine for about a month until last week where my phone just stop working.
Problem: Device is stuck on the Motorola Logo, bootloader loop.
Tested Solutions so far:
1- I tried to restore the stock firmware from the bootloader mode, but I always failed. I am applying the procedure given in:
http://forum.xda-developers.com/showthread.php?t=2759495
but it always failed. The method is working and the phone's screen some instructions are appearing, but between them, I notice in red/pink color that the phone is saying:
....
hab check failed for boot
......
hab chck failed for recovery
2- I also tried to install zip from sdcard from the CWM Recovery, or even to simply wipe cache, .... but strangely I am getting error on CWM as following:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open/cache/recovery/last_install
and when I tried to install zip from sideload, I am also getting an error:
E:Error in /tmp/update.zip
(Status 7)
So.....basically, I do not know what to do or try more. Any idea. Please Help ?!!!
Thanks
First change ur recovery to twrp 2.5.8 using adb method and then try to install latest cm12.1 . maybe ur downloaded file is corrupted.
Hit thanks if helped. goodluck☺��
youwave111 said:
First change ur recovery to twrp 2.5.8 using adb method and then try to install latest cm12.1 . maybe ur downloaded file is corrupted.
Hit thanks if helped. goodluck☺��
Click to expand...
Click to collapse
Thanks for the infos. I tried to install TWRP but I am receiving an error "Mismatched partition size (recovery)". Any ideas ?!!!
moh19814 said:
Thanks for the infos. I tried to install TWRP but I am receiving an error "Mismatched partition size (recovery)". Any ideas ?!!!
Click to expand...
Click to collapse
I tried again using this time twrp-2.7.1.0-condor.img, but still I am getting on the phone's screen the same message:
"Mismatched partition size (recovery)",
and on the adb (CMD) window, I am getting:
<bootloader> Failed to erase partition
<bootloader> Failed to flash partition recovery
Failed <remote failure>
Any ideas ?!!!. Please Help !!!
Try ro use twrp 2.5.8 or above instead and write the following command in cmd
Fastboot boot recovery.img
In this way you're not owerwriting the recovery and if it boots up fine then install the stock firmware
Peace✌
Hit thanks pls
youwave111 said:
Try ro use twrp 2.5.8 or above instead and write the following command in cmd
Fastboot boot recovery.img
In this way you're not owerwriting the recovery and if it boots up fine then install the stock firmware
Peace✌
Hit thanks pls
Click to expand...
Click to collapse
Thanks again for the help. I tried that also.
On the CMD window, I got OK, but the phone reboot and stuck on the Motorola Logo page and nothing happen after. ?!!!
For info, I tried with both TWRP 2.7.1.0 and 2.8.6.0, and in both cases phone stuck on the Motorola Logo after reboot.
Any idea what is hapenning ?!!
Thanks
Can any one help me my moto e xt1022 was bricked whlie i update to 4.4.4 pls help me
IMTHI said:
Can any one help me my moto e xt1022 was bricked whlie i update to 4.4.4 pls help me
Click to expand...
Click to collapse
Can you get into the recovery mode ?
Sent from my Y541-U02 using Tapatalk
moh19814 said:
Hello everyone,
I am trying to unbrick my Moto E XT1021 but so far nothing work. Here are the infos:
Status: Device is unlocked (Status Code: 3), rooted, and CWM Recovery (v6.0.4.9) is installed.
Initially, I installed Kitkat Rom from this link https://www.youtube.com/watch?v=w7S5WmlPgrI, but after finishing, OTA showed me an update to 5.0.2, which I did. Everything work fine for about a month until last week where my phone just stop working.
Problem: Device is stuck on the Motorola Logo, bootloader loop.
Tested Solutions so far:
1- I tried to restore the stock firmware from the bootloader mode, but I always failed. I am applying the procedure given in:
http://forum.xda-developers.com/showthread.php?t=2759495
but it always failed. The method is working and the phone's screen some instructions are appearing, but between them, I notice in red/pink color that the phone is saying:
....
hab check failed for boot
......
hab chck failed for recovery
2- I also tried to install zip from sdcard from the CWM Recovery, or even to simply wipe cache, .... but strangely I am getting error on CWM as following:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open/cache/recovery/last_install
and when I tried to install zip from sideload, I am also getting an error:
E:Error in /tmp/update.zip
(Status 7)
So.....basically, I do not know what to do or try more. Any idea. Please Help ?!!!
Thanks
Click to expand...
Click to collapse
Ur internal storage is gone...consult ur nearby Motorola service centre
To confirm whether ur internal is working or not flash a boot logo via adb, if it fails to install then ur internal is gone!! :/
Sent from my falcon using Tapatalk
Try to flash the stock firmware
Press thanks if I helped you☺
Same problem with my moto e 1st gen...if u find any solution please tell me...
moh19814 said:
Thanks again for the help. I tried that also.
On the CMD window, I got OK, but the phone reboot and stuck on the Motorola Logo page and nothing happen after. ?!!!
Click to expand...
Click to collapse
Same problem with my moto e 1st gen, if u fond any solutions please tell me so that i can give a new life to my dead moto e.. Thanks a lot in advance..
My email id
[email protected]
phone is dead
ProudRed said:
Can you get into the recovery mode ?
Sent from my Y541-U02 using Tapatalk
Click to expand...
Click to collapse
No,phone is not starting,even not going into recovery or bootloader when I plug the charger led is blinking pls help my friend
Thanks in advance
moh19814 said:
Hello everyone,
I am trying to unbrick my Moto E XT1021 but so far nothing work. Here are the infos:
Status: Device is unlocked (Status Code: 3), rooted, and CWM Recovery (v6.0.4.9) is installed.
Initially, I installed Kitkat Rom from this link
, but after finishing, OTA showed me an update to 5.0.2, which I did. Everything work fine for about a month until last week where my phone just stop working.
Problem: Device is stuck on the Motorola Logo, bootloader loop.
Tested Solutions so far:
1- I tried to restore the stock firmware from the bootloader mode, but I always failed. I am applying the procedure given in:
http://forum.xda-developers.com/showthread.php?t=2759495
but it always failed. The method is working and the phone's screen some instructions are appearing, but between them, I notice in red/pink color that the phone is saying:
....
hab check failed for boot
......
hab chck failed for recovery
2- I also tried to install zip from sdcard from the CWM Recovery, or even to simply wipe cache, .... but strangely I am getting error on CWM as following:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open/cache/recovery/last_install
and when I tried to install zip from sideload, I am also getting an error:
E:Error in /tmp/update.zip
(Status 7)
So.....basically, I do not know what to do or try more. Any idea. Please Help ?!!!
Thanks
Click to expand...
Click to collapse
Try this:-
https://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093/amp/

Categories

Resources