hi, sorry for my english.
last night when i turned on my phone it stuck on sony logo.
i restarted many times but it did not helped, then i flashed it but same here.
the phone is locked so i cannot enter to recovery.
also usb debugging is off : ( that's flashtool is saying when i connect the phone.
what can i do? please help.
Install the drivers first when you install flashtool. Download either stock GB or ICS .ftf then flash your device in flash mode (don't forget to install fastboot and flash mode drivers). There are numerous guides here in XDA mate.
---------- Post added at 11:59 PM ---------- Previous post was at 11:55 PM ----------
The stock GB and ICS firmwares are here on XDA, just search for them or type them in Google search. I'm using a mobile with slow internet speeds so I can't post the links. Hope you find them!
I accidently flashed wrong CWM recovery to my phone...
Now its went to boot loop....:crying::crying::crying::crying:
When I power on phone by pressing Vol Down + Power button it shows Fastboot mode in Mobile Screen at the Buttom edge...
But When I tried in Command Prompt with "fastboot devices" its dont show my device.... as well as "adb devices"
Some one please tell me How to flash my phone with orginal recovery.... Please....
tigerdhana1371102 said:
I accidently flashed wrong CWM recovery to my phone...
Now its went to boot loop....:crying::crying::crying::crying:
When I power on phone by pressing Vol Down + Power button it shows Fastboot mode in Mobile Screen at the Buttom edge...
But When I tried in Command Prompt with "fastboot devices" its dont show my device.... as well as "adb devices"
Some one please tell me How to flash my phone with orginal recovery.... Please....
Click to expand...
Click to collapse
hi, see attach file. translate it with google
you need to find original stock rom (try needrom.com)
next time do not try to flash CWM to your infocus.
good luck
Thank you for the help Bro... But please tell me few more details...
yosi s said:
hi, see attach file. translate it with google
you need to find original stock rom (try needrom.com)
next time do not try to flash CWM to your infocus.
good luck
Click to expand...
Click to collapse
I am on trying it.....
Can you please tell me how to flash it with stock rom?
Should I use SP flashtool or something other???
Please....
and when I use Vol + button and power button combination its still getinto bootloop
but when I use Vol - Button and power button its getinto fastboot mode(in the lower left cornet it shows "=>Fastboot mode..." message....
I updated the taiwan101 recovery by using mobileuncle tools earlier....
and for solution I tried to take backup of another M2 3G phone's recovery.img and I tried to flash it via fastboot
the command i used to flash
"fastboot -i 0x0489 flash recovery recovery.img"
But its give me a error like in picture...
help
TigerDhana017 said:
I am on trying it.....
Can you please tell me how to flash it with stock rom?
Should I use SP flashtool or something other???
Please....
and when I use Vol + button and power button combination its still getinto bootloop
but when I use Vol - Button and power button its getinto fastboot mode(in the lower left cornet it shows "=>Fastboot mode..." message....
I updated the taiwan101 recovery by using mobileuncle tools earlier....
and for solution I tried to take backup of another M2 3G phone's recovery.img and I tried to flash it via fastboot
the command i used to flash
"fastboot -i 0x0489 flash recovery recovery.img"
But its give me a error like in picture...
Click to expand...
Click to collapse
hi TigerDhana017 were u able to flash the stock rom from needrom.com? plz reply soon.i'm in dire state
thanx in advance
gauravinvouge said:
hi TigerDhana017 were u able to flash the stock rom from needrom.com? plz reply soon.i'm in dire state
thanx in advance
Click to expand...
Click to collapse
Sorry for the delay bro... I cant flash it via SP Flashtool with rom which I directly downloaded from the Infocus official website.
So I gave it to Service Center. As soon as I get my mobile back I will update you the method of Flashing...
Solved
tigerdhana1371102 said:
I accidently flashed wrong CWM recovery to my phone...
Now its went to boot loop....:crying::crying::crying::crying:
When I power on phone by pressing Vol Down + Power button it shows Fastboot mode in Mobile Screen at the Buttom edge...
But When I tried in Command Prompt with "fastboot devices" its dont show my device.... as well as "adb devices"
Some one please tell me How to flash my phone with orginal recovery.... Please....
Click to expand...
Click to collapse
Not a big deal dude.
Today it has been solved.:angel:
Go to the below link and Download link unable to post as a new user
then paste it in SD card for flashing.
Go to recovery model update from SD and flash it through.
Simple....... :good: have a nice day.
if u face any problem reply me.
---------- Post added at 12:16 PM ---------- Previous post was at 12:06 PM ----------
1
---------- Post added at 12:26 PM ---------- Previous post was at 12:16 PM ----------
2 waited for 4min
---------- Post added at 12:31 PM ---------- Previous post was at 12:26 PM ----------
i can paste link only after sending 10 reply
---------- Post added at 12:38 PM ---------- Previous post was at 12:31 PM ----------
why should i wait to help peoples
---------- Post added at 12:45 PM ---------- Previous post was at 12:38 PM ----------
5
---------- Post added at 01:20 PM ---------- Previous post was at 12:45 PM ----------
6
---------- Post added at 01:45 PM ---------- Previous post was at 01:20 PM ----------
---------- Post added at 01:58 PM ---------- Previous post was at 01:45 PM ----------
---------- Post added at 02:04 PM ---------- Previous post was at 01:58 PM ----------
:cyclops:
TigerDhana017 said:
Sorry for the delay bro... I cant flash it via SP Flashtool with rom which I directly downloaded from the Infocus official website.
So I gave it to Service Center. As soon as I get my mobile back I will update you the method of Flashing...
Click to expand...
Click to collapse
tiger dhana017 refer this part of ur comment
"rom which I directly downloaded from the Infocus official website"
where did u find the ROM from the official site?plz guide me or give me ur no mine is "08283821978"
thanx in advance
---------- Post added at 10:45 AM ---------- Previous post was at 10:35 AM ----------
funlover said:
Not a big deal dude.
Today it has been solved.:angel:
Go to the below link and Download link unable to post as a new user
then paste it in SD card for flashing.
Go to recovery model update from SD and flash it through.
Simple....... :good: have a nice day.
if u face any problem reply me.
---------- Post added at 12:16 PM ---------- Previous post was at 12:06 PM ----------
1
---------- Post added at 12:26 PM ---------- Previous post was at 12:16 PM ----------
2 waited for 4min
---------- Post added at 12:31 PM ---------- Previous post was at 12:26 PM ----------
i can paste link only after sending 10 reply
---------- Post added at 12:38 PM ---------- Previous post was at 12:31 PM ----------
why should i wait to help peoples
---------- Post added at 12:45 PM ---------- Previous post was at 12:38 PM ----------
5
---------- Post added at 01:20 PM ---------- Previous post was at 12:45 PM ----------
6
---------- Post added at 01:45 PM ---------- Previous post was at 01:20 PM ----------
---------- Post added at 01:58 PM ---------- Previous post was at 01:45 PM ----------
---------- Post added at 02:04 PM ---------- Previous post was at 01:58 PM ----------
:cyclops:
Click to expand...
Click to collapse
hi funlover where's the link bro plz just write it.i'm in big problem .
thanx in advance
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
bro beofore flashing the recovery u need to unlock OEM
fastboot -i 0x0489 oem unlock
Help me out
gauravinvouge said:
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
Click to expand...
Click to collapse
I did everything the same but my problem is i'm just unable to get the recovery mode. followed the all procedure. I choose the wrong CMW recovery Mobile Uncle tools an it makes boot stuck up. volume Up and powerbutton is not working for me i plugged the USG to pc it's restarting again again. Is there any way
Keeps rebooting, can't get recovery mode
How can you flash when the phone keeps rebooting ? it will not go into recovery mode.
The recovery is for Infocus M2 4g.. If flashed in 3g version, the phone will brick
hey i also got stuck in same prblm which tigerdhana has got into please expert members help me out
bump
stop spamming I m literlly dying to know solution
any guys plz help me my infocus m2 3g mobile used and my mobile is iroot to used rooted and i am download the update.zip file and my phone is install sucessfull after reboot on mobile is one problem is produced and my phone problem below attached image file plz help me.......................
any guys plz help me my infocus m2 3g mobile used and my mobile is iroot to used rooted and i am download the update.zip file and my phone is install sucessfull after reboot on mobile is one problem is produced and my phone problem below attached image file plz help me.......................
Here is the solution!
Same happens with me i flashed wrong recovery in infocus m2 and my device got bootloop and unable to boot in recovery. fortunately device is able to boot in fastboot mode.
here what i did next.
1. download stock firmware of Infocus m2 3g from here firmwarefile.com/infocus-m2-3g to your pc and extract it . open folder Firmware ,right click G10-020F-0-00WW-A02.zip ,select extract here.
2. This firmware zip has folder named as ServiceTool L1 V1.6.0 (IMEI). open it and run the setup.exe . after that run ServiceToolL1_V1.6.0.msi .
3. Now open folder SUTL3 v3.1.4 (Flash Tool) and run launcher.exe as administator, it will install sut flash tool.
4. Now open C:\Program Files (x86)\SUT L3 and find SoftwareUpdateTool.exe run it as admin(you can also run it from start> all programs>SUT L3). click next.
5. Now connect your phone to pc using usb cable. press volume down and power button at a same time(this will reboot your phone in fastboot mode ).you should see the fastboot mode text at bottom left.
6. Now select the sofware image by locating to Infocus_M2_3G_G10-020F-0-00WW-A02\ Firmware\ and select file G10-020F-0-00WW-A02.nb0 and then click open. in update option select normal download and click next. now you have to wait for about 10min or more. don't remove usb cable.
tool will download all files automatically to the phone and after downloading file it will reboot your phone automatically.
firstboot will take time .
if you follow these steps carefully then you will get your device back to the normal with all of your apps and data.
Note: This method will work even when your device is not detected by adb so go for it.
Hit thanks if this helps.
Use SUT Tool For Flashing Your Infocus M2
Download the firmware and the Software Update Tool (SUT) from the internet and flash the .nb0 or .ffu file through SUT tool... That's it it takes a 10-15 minutes and you're done.. :good:
my friend bought new RN3 SD from local shop 7 days ago. He tried to flash MIUI 6.9.22 fastboot rom with miFlashtool.
miflash refuse to flash rom after some time and it lets the phone half baked. Now phone is no vibrating while pressing power button only goes to 900E mode . there is no fastboot no edl. tried mathod from xiaomitips
http://xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
no luck to go in edl
bootloader of phone is locked
please tell anyone what can be done to revive this phone..
By qualcomm bootstrap brush into the system.
What shows up when you open MIflash?
Ivanlai said:
What shows up when you open MIflash?
Click to expand...
Click to collapse
He phone no come to fastboot and the no unlock.
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
Say a little detail. Qualcomm system with the underlying program can be written. Bypass bootloder and fastboot.
---------- Post added at 07:02 AM ---------- Previous post was at 06:59 AM ----------
yogesh1970 said:
my friend bought new RN3 SD from local shop 7 days ago. He tried to flash MIUI 6.9.22 fastboot rom with miFlashtool.
miflash refuse to flash rom after some time and it lets the phone half baked. Now phone is no vibrating while pressing power button only goes to 900E mode . there is no fastboot no edl. tried mathod from xiaomitips
http://xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
no luck to go in edl
bootloader of phone is locked
please tell anyone what can be done to revive this phone..
Click to expand...
Click to collapse
Can you show me find what equipment it is computer?
Jiahao Lin said:
He phone no come to fastboot and the no unlock.
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
Say a little detail. Qualcomm system with the underlying program can be written. Bypass bootloder and fastboot.
---------- Post added at 07:02 AM ---------- Previous post was at 06:59 AM ----------
Can you show me find what equipment it is computer?
Click to expand...
Click to collapse
You can enter EDL mode by fastboot using a tool. http://forum.xda-developers.com/android/software-hacking/guide-how-to-reboot-to-edl-fastboot-t3394292
finally used Test Point method to revive the phone.....
lost warrenty..
guide from xiaomitips not work on me
only test point gave a breathe to phone
I bought a xperia xa ultra .after i update it with new room 6.01 whith flash tools .it take brick.and when i want to flash it again with flash tool this message is shown. Device connected in mtp mode. to many service man couldnt turn on it. it have no any action with computer .no vibration with hold volum down- up-and any reaction ,..
can u solved ?
Nope, You have to take it to service
---------- Post added at 09:32 PM ---------- Previous post was at 09:32 PM ----------
Did you follow this guide? https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319
Help! Install a custom recovery on my zte z970 that did not work, when I try to enter it puts black screen and red led on. Then I did factory restore inside the operating system and now constantly going to that recovery that does not work. I need to flash a recovery or debrick my zte. Please help! Anything I'm worth, adb commands or any orientation.:crying:
iamjaviag99 said:
Help! Install a custom recovery on my zte z970 that did not work, when I try to enter it puts black screen and red led on. Then I did factory restore inside the operating system and now constantly going to that recovery that does not work. I need to flash a recovery or debrick my zte. Please help! Anything I'm worth, adb commands or any orientation.:crying:
Click to expand...
Click to collapse
If you are able to use Recovery mode , download on your PC one of these stock firmware , and put in your sdcard and update from Recovery.
https://boycracked.com/2016/04/16/official-zte-zmax-z970-t-mobilemetropcs-usa-stock-rom/
Thanks but thats the problem, I install a recovery that dosnt work, dont have recovery right now
Need a rom with xml file to flash my phone with qfil o qpst software but i cant find it
Here you have some ADB commands
https://forum.xda-developers.com/zte-zmax/how-to/zte-zmax-z970-guide-faq-discussion-t3053066/page260
Here you have some recovery for your device
https://androidfilehost.com/?w=files&flid=32972
One of firmware I think
https://androidfilehost.com/?fid=889764386195905580
thaks bro, I will try :good:
If anyone still has a ZTE z970 that's bricked .... I found the fix ... Plug into the PC in bricked state.. hold volume down and power till you hear it connect in ftm mode.. even if it doesn't show up on the phone's screen.. then open cmd in admin.. type this command in.. "adb reboot disemmcwp" and wait for it to boot like normal.
---------- Post added at 06:07 AM ---------- Previous post was at 06:07 AM ----------
My phone was bricked for 6 months
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Also fixed the screen that didn't have touch