Related
I've unlocked the boot loader and installed the TWRP 3.0.2 in my moto E dual sim , after that i 've made the backup also for the stock rom, then i wanted to install the new rom so i have downloaded it and placed in the external storage with the Gapps .. but when m trying to install everything is getting installed and after thatit is getting stuck at the bootloader . steps what i did is
1) wipe
factory reset/davik cache/data/cache
2)install the roms and gapps
even i've tried to restore the system but still it is remaining same only
still waiting for the help
gulsher said:
still waiting for the help
Click to expand...
Click to collapse
Again flash rom without gapps and check. Or you may have to flash twrp by fastboot
Also, in bootloader, is there any hab check fail or any such error?
Sent from my Moto E
what android version were you on before unlocking bootloader?
and you didn't mention which rom are you trying to flash? kitkat, lollipop or marshmallow? and name of the rom
booo159159 said:
what android version were you on before unlocking bootloader?
and you didn't mention which rom are you trying to flash? kitkat, lollipop or marshmallow? and name of the rom
Click to expand...
Click to collapse
ok i was on lollipop and tried to flash [ROM][6.0.1_r24]Temasek v6.9 for moto E [UBERTC 5.3][STABLE][18th apr update] but not able to do so and further i cant restore the backup also , i cant figure out where i'am going wrong
drs22 said:
Again flash rom without gapps and check. Or you may have to flash twrp by fastboot
Also, in bootloader, is there any hab check fail or any such error?
Sent from my Moto E
Click to expand...
Click to collapse
tried that without gapps still i'm stuck and yeah i've flashed twrp by fastboot , in bootloader no message like fail or error
gulsher said:
tried that without gapps still i'm stuck and yeah i've flashed twrp by fastboot , in bootloader no message like fail or error
Click to expand...
Click to collapse
Then rom should boot up fine. Maybe someone more experienced can help you out
P.S. you may check this link:
http://www.smartmobilephonesolutions.com/content/android-stuck-startup-boot-loop
Sent from my Moto E
Flash factory image using pc
Sent from my Moto E using Tapatalk
gulsher said:
I've unlocked the boot loader and installed the TWRP 3.0.2 in my moto E dual sim , after that i 've made the backup also for the stock rom, then i wanted to install the new rom so i have downloaded it and placed in the external storage with the Gapps .. but when m trying to install everything is getting installed and after thatit is getting stuck at the bootloader . steps what i did is
1) wipe
factory reset/davik cache/data/cache
2)install the roms and gapps
even i've tried to restore the system but still it is remaining same only
Click to expand...
Click to collapse
You are doing it wrong hence you are stuck at bootloader.
Follow these steps
1)Boot into twrp by pressing vol+power key.
2)Select Wipe
Wipe dalvik,cache,internal,data
3)Go to install
Select ROM and Gapps
Swipe to install them.
4)Reboot
5)wait till it show setup wizard.
If these fails then you have to reinstall stock then install twrp 2.8.x try flashing ROMs.
Abhimanyu Shekhawat 121 said:
Flash factory image using pc
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
link for factory image ? sorry to trouble u!!
gulsher said:
link for factory image ? sorry to trouble u!!
Click to expand...
Click to collapse
There in general section
Sent from my Moto E using Tapatalk
piku 123 said:
You are doing it wrong hence you are stuck at bootloader.
Follow these steps
1)Boot into twrp by pressing vol+power key.
2)Select Wipe
Wipe dalvik,cache,internal,data
3)Go to install
Select ROM and Gapps
Swipe to install them.
4)Reboot
5)wait till it show setup wizard.
If these fails then you have to reinstall stock then install twrp 2.8.x try flashing ROMs.
Click to expand...
Click to collapse
i've tried these steps only , but the same loop again. i will wait for further more replies , if not working then will go back to stock
gulsher said:
i've tried these steps only , but the same loop again. i will wait for further more replies , if not working then will go back to stock
Click to expand...
Click to collapse
what twrp version you are using?
piku 123 said:
what twrp version you are using?
Click to expand...
Click to collapse
twrp-3.0.2-0-condor.img
this https://dl.twrp.me/condor/
gulsher said:
twrp-3.0.2-0-condor.img
this https://dl.twrp.me/condor/
Click to expand...
Click to collapse
use twrp 2.8.x version i believe this version of twrp is causing issues.
piku 123 said:
use twrp 2.8.x version i believe this version of twrp is causing issues.
Click to expand...
Click to collapse
cant flash the old recovery , any way to remove the current recovery ?
update : not able to install any recovery like older or cwm recovery
Re flash stock moto E kitkat rom through fastboot.
Follow this guide
http://dev-viraj.blogspot.in/2015/02/flash-official-android-444-on-moto-e.html
---------- Post added at 05:33 PM ---------- Previous post was at 05:24 PM ----------
Sorry buddy did you wipe system too during flashing process.
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
gulsher said:
cant flash the old recovery , any way to remove the current recovery ?
update : not able to install any recovery like older or cwm recovery
Click to expand...
Click to collapse
you can flash old recovery through fastboot.
Flash older twrp through exact same steps you did to flash the current one.
If that doesn't help then at last flash stock lollipop from here : http://forum.xda-developers.com/showthread.php?t=2755857
Booting for the first time after flashing stock rom takes time, probably you have to wait atleast 10-15 mins at "Unlocked Bootloader" warning
Avoid downgrading to kitkat
piku 123 said:
Re flash stock moto E kitkat rom through fastboot.
Follow this guide
http://dev-viraj.blogspot.in/2015/02/flash-official-android-444-on-moto-e.html
---------- Post added at 05:33 PM ---------- Previous post was at 05:24 PM ----------
Sorry buddy did you wipe system too during flashing process.
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
you can flash old recovery through fastboot.
Click to expand...
Click to collapse
-z3r0- said:
Flash older twrp through exact same steps you did to flash the current one.
If that doesn't help then at last flash stock lollipop from here : http://forum.xda-developers.com/showthread.php?t=2755857
Booting for the first time after flashing stock rom takes time, probably you have to wait atleast 10-15 mins at "Unlocked Bootloader" warning
Avoid downgrading to kitkat
Click to expand...
Click to collapse
thanks for your help ... i will see
Does anybody have or know where I can get the stock firmware for the LG-AS330?
What happened was I flashed a custom recovery and got the error code 1003 and couldnt boot to recovery but the phone was still usable. The I glashed a boot.img using flashify and now I'm stick in a boot loop that says "Secure booting error! Error Code : 1003 MODIFIED !!" then the phone turns off then goes right back to that screen then repeats. The only thing I can do is get to download mode to flash stuff to it (I think). Anyways, if anybody has or knows where I can get the stock firmware and what program to flash it with it and post the link to the firmware and the program it would be much appreciated.
Always make backups before you flash. As of right now, there is no official stock firmware.
simply get ur firmware ,, from LG BRIDGE TOOL
---------- Post added at 04:20 AM ---------- Previous post was at 04:07 AM ----------
steps to obtain firmware from LG BRIDGE TOOL
1ST :- CONNECT UR PHONE TO PC
2ND :- OPEN LG BRIDGE TOOL, AND SELECT UPGRADE ERROR RECOVERY OPTION
3RD:- AS IT STARTS THE DOWNLOAD OF THE FIRMWARE / OPEN WINDOWS FILE EXPLORER AND CHECK HIDDEN ITEMS OPTION IN IT
4TH :- GO TO THIS LOCATION U WILL FIND UR KDZ FIRMWARE FILE AND UR LG UP DLL FILE TOO ,,BELOW IS THE LOCATION :-
C:\Users\YOURUSERNAME\AppData\Local\LG Electronics\LG Bridge\SWUpgrade\Image
5TH :- GO TO THAT LOCATION AND COPY KDZ FIRMWARE.. IT TO UR DESKTOP,, NOTE!! LET THE DOWNLOAD FULLY COMPLETE
AT THE TIME OF FLASH ,,U COPY TO UR DESIRED LOCATION
,,AND BE FAST ,,AS THE FILE WILL BE REMOVED BY THE LG BRIDGE AFTER THE FLASH WILL COMPLETE
RahulMantha said:
simply get ur firmware ,, from LG BRIDGE TOOL
---------- Post added at 04:20 AM ---------- Previous post was at 04:07 AM ----------
steps to obtain firmware from LG BRIDGE TOOL
1ST :- CONNECT UR PHONE TO PC
2ND :- OPEN LG BRIDGE TOOL, AND SELECT UPGRADE ERROR RECOVERY OPTION
3RD:- AS IT STARTS THE DOWNLOAD OF THE FIRMWARE / OPEN WINDOWS FILE EXPLORER AND CHECK HIDDEN ITEMS OPTION IN IT
4TH :- GO TO THIS LOCATION U WILL FIND UR KDZ FIRMWARE FILE AND UR LG UP DLL FILE TOO ,,BELOW IS THE LOCATION :-
C:\Users\YOURUSERNAME\AppData\Local\LG Electronics\LG Bridge\SWUpgrade\Image
5TH :- GO TO THAT LOCATION AND COPY KDZ FIRMWARE.. IT TO UR DESKTOP,, NOTE!! LET THE DOWNLOAD FULLY COMPLETE
AT THE TIME OF FLASH ,,U COPY TO UR DESIRED LOCATION
,,AND BE FAST ,,AS THE FILE WILL BE REMOVED BY THE LG BRIDGE AFTER THE FLASH WILL COMPLETE
Click to expand...
Click to collapse
The phone will be in boot loop once I plug it into the pc, does that matter?
Edit: apparenly that does matter cause AFTER I click update RECOVERY ERROR it says CONNECT your mobile device to the usb port. If it IS already connected, connact LG customer service.
first unlock ur bootloader and then flash recovery image
then u will not get secure boot modified error
RahulMantha said:
first unlock ur bootloader and then flash recovery image
then u will not get secure boot modified error
Click to expand...
Click to collapse
Could you point me in the direction OF the stock RECOVERY Image for the as330? Also how do I unlock the boot loader with the phone in boot loop state?
first unbrick ur phone ,, because u can't unlock before
RahulMantha said:
first unbrick ur phone ,, because u can't unlock before
Click to expand...
Click to collapse
How can i unbrick it even though it is not bricked?
obtain ur firmware from lg bridge ,, i use to obtain my firmware from lg bridge
---------- Post added at 06:31 AM ---------- Previous post was at 06:30 AM ----------
oka switch off ur phone ,, and press volumedown and powerbutton until u see the factory reset mode of stock
RahulMantha said:
obtain ur firmware from lg bridge ,, i use to obtain my firmware from lg bridge
Click to expand...
Click to collapse
Thats not possible for my situation. Lg bridge doesnt even detect the device.
even though u do a factory reset ,, using stock recovery ,,it will show u the same error ,,at the time of boot up ,,
RahulMantha said:
obtain ur firmware from lg bridge ,, i use to obtain my firmware from lg bridge
---------- Post added at 06:31 AM ---------- Previous post was at 06:30 AM ----------
oka switch off ur phone ,, and press volumedown and powerbutton until u see the factory reset mode of stock
Click to expand...
Click to collapse
Didnt work. Still stuck in boot loop after the factory reset.
RahulMantha said:
even though u do a factory reset ,, using stock recovery ,,it will show u the same error ,,at the time of boot up ,,
Click to expand...
Click to collapse
I guess I forgot to mention that its a custom recovery that I cant get to.
oka as i said u ,, even though u do a factory reset same error will occur,, at the time of boot up ,, because u flashed the boot.img that is not intended for ur devices,, EVEN I USE TO HAVE ,,THIS PROBLEM ,,BUT I USED LG UP TOOL TO UNBRICK ,,FOR MORE U SEE THIS LINK
:-http://www.lg.com/us/support/product-help/CT10000026-1438110404543-preinstall-apps
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
is u already have twrp flashed in ur device
RahulMantha said:
oka as i said u ,, even though u do a factory reset same error will occur,, at the time of boot up ,, because u flashed the boot.img that is not intended for ur devices,, EVEN I USE TO HAVE ,,THIS PROBLEM ,,BUT I USED LG UP TOOL TO UNBRICK ,,FOR MORE U SEE THIS LINK
:-http://www.lg.com/us/support/product-help/CT10000026-1438110404543-preinstall-apps
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
is u already have twrp flashed in ur device
Click to expand...
Click to collapse
Again, the phone is not bricked, it is bootlooping. And yes I flashed the twrp to my device and can't get to it.
as u can't unlock bootloader at that state,, if unlock,only u can enter into twrp ,,one thing u tell me,,,is u flashed twrp in ur
boot partition ,,as u don't no ,,that always twrp must,,be flashed in recovery partition ,,i think u flashed recovery in boot partition
RahulMantha said:
as u can't unlock bootloader at that state,, if unlock,only u can enter into twrp ,,one thing u tell me,,,is u flashed twrp in ur
boot partition ,,as u don't no ,,that always twrp must,,be flashed in recovery partition ,,i think u flashed recovery in boot partition
Click to expand...
Click to collapse
Is there any way to pull it from the boot partition and put it in the recovery partition? That is if I did put it in the boot partition. And how do I find out what partition it is in with the phone in THIS state?
we can get ,,the boot partition to stock ,,by fastboot commands,,but it only possible when u unlock bootloader ,,there is no other way
RahulMantha said:
we can get ,,the boot partition to stock ,,by fastboot commands,,but it only possible when u unlock bootloader ,,there is no other way
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in this state?
one bad thing about useless lg k7,, including all series is ,,there is no bootloader mode buttons has other phone have link nexux ,,pixel phones,,and only one way is by getting into bootloader by adb commands
Hi,
sorry if i'm the 100th person to ask this question but how can i go back to the stock ROM with OTA?
I currently have a flavor of LinageOS with the Turbo Z kernel installed on my phone but it's just to buggy for me. I want to have root access on my phone for various reasons though.
I tried to just download different (6.0/7.0) stock ROM files but i can't install them with TWRP. I know that 7.1.x was released but i can not find the ROM for it.
What is the easiest way to just go back to a stock ROM? I know my way around the console but i don't want to brick my phone. I made backups of my files and also with TWRP so data loss is not an issue.
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
First things first.
On which bootloader are you, MM or are you on Nougat. If your device has been flashed with the 7(N) bootloader, you cannot flash the 6.0 stock, you will have to stay of 7.
Use the fastboot flash / erase commands, as in this thread:
https://forum.xda-developers.com/showpost.php?p=73119650&postcount=1
If at any stage your phone get bricked, ie, black screen after reboot, no charging, etc. Use these instructions. They saved me in the last week from returning my device for a replacement(and paying $350.00):
https://forum.xda-developers.com/showpost.php?p=71874880&postcount=1
lollyjay said:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
Click to expand...
Click to collapse
Does this work for the EU version too? I'm not sure if the baseband thingy is compatible. I'll need a EU ROM otherwise but i can't find any for Android 7 :/
bert269 said:
On which bootloader are you, MM or are you on Nougat. If your device has been flashed with the 7(N) bootloader, you cannot flash the 6.0 stock, you will have to stay of 7.
Click to expand...
Click to collapse
I've already updated to Android 7 so i guess i've to use a stock Nougat ROM.
Read my last post on page 15 of this thread
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-root-moto-z-supersu-t3551113/page15
Where can I find the stock recovery for XT1650-03 RETEU without downloading an entire ROM zip file?
I have stock 7.0.0 with TWRP and Magisk 13.3.
I want to install the stock recovery so that I can install the 7.1.1 OTA which is available on my device, after which I will flash TWRP and root again. Will this work?
Byte_76 said:
Where can I find the stock recovery for XT1650-03 RETEU without downloading an entire ROM zip file?
I have stock 7.0.0 with TWRP and Magisk 13.3.
I want to install the stock recovery so that I can install the 7.1.1 OTA which is available on my device, after which I will flash TWRP and root again. Will this work?
Click to expand...
Click to collapse
If you didn't take a backup of your stock boot and recovery before, then i think you'll have to go the long way by flashing the whole rom.
If you manage to install the 7.1.1 OTA after that, boot once into TWRP, backup stock recovery & boot and save it on your sdcard/pc. Then you can start flashing TWRP permantly, root, etc
Someone correct me, if I'm wrong.
Byte_76 said:
Where can I find the stock recovery for XT1650-03 RETEU without downloading an entire ROM zip file?
I have stock 7.0.0 with TWRP and Magisk 13.3.
I want to install the stock recovery so that I can install the 7.1.1 OTA which is available on my device, after which I will flash TWRP and root again. Will this work?
Click to expand...
Click to collapse
What is your build number?
lollyjay said:
What is your build number?
Click to expand...
Click to collapse
The current build number is NPLS25.86-30-12
Byte_76 said:
The current build number is NPLS25.86-30-12
Click to expand...
Click to collapse
Here is my recovery.img for NPLS25.86-30-12
https://drive.google.com/file/d/0B3gcDbDvV4MkOHhPd0lBVE9IMzg/view?usp=drivesdk
It should work for reteu also if not you can just reflash twrp:cyclops:
lollyjay said:
Here is my recovery.img for NPLS25.86-30-12
https://drive.google.com/file/d/0B3gcDbDvV4MkOHhPd0lBVE9IMzg/view?usp=drivesdk
It should work for reteu also if not you can just reflash twrp:cyclops:
Click to expand...
Click to collapse
Thank you!
---------- Post added at 12:31 AM ---------- Previous post was at 12:15 AM ----------
lollyjay said:
Here is my recovery.img for NPLS25.86-30-12
https://drive.google.com/file/d/0B3gcDbDvV4MkOHhPd0lBVE9IMzg/view?usp=drivesdk
It should work for reteu also if not you can just reflash twrp:cyclops:
Click to expand...
Click to collapse
Your recovery works on my Moto Z.
I now have stock 7.0.0 rooted with Magisk 13.3, stock recovery and unlocked bootloader.
If I proceed with the 7.1.1 OTA, will it work?
Byte_76 said:
Thank you!
---------- Post added at 12:31 AM ---------- Previous post was at 12:15 AM ----------
Your recovery works on my Moto Z.
I now have stock 7.0.0 rooted with Magisk 13.3, stock recovery and unlocked bootloader.
If I proceed with the 7.1.1 OTA, will it work?
Click to expand...
Click to collapse
You must have fully stock. I would suggest that you uninstall Magisk
lollyjay said:
You must have fully stock. I would suggest that you uninstall Magisk
Click to expand...
Click to collapse
The reason that I installed Magisk is because after unlocking the bootloader with the stock rom, it would not boot anymore. Installing a custom kernel or Magisk solves that issue.
Byte_76 said:
The reason that I installed Magisk is because after unlocking the bootloader with the stock rom, it would not boot anymore. Installing a custom kernel or Magisk solves that issue.
Click to expand...
Click to collapse
I still would suggest that you uninstall Magisk because the OTA would not work.
lollyjay said:
I still would suggest that you uninstall Magisk because the OTA would not work.
Click to expand...
Click to collapse
Okay I uninstalled Magisk which initiated an immediate reboot and resulted in a bootloop just after the bootloader message.
I think the issue occurs because the Data partition gets encrypted when root is uninstalled and decrpyption fails because of a bad key due to the unlocked bootloader.
To recover, I used TWRP to wipe/format the Data partition and then flashed the no_verity zip file from the thread below which disables encryption. I then ran "fastboot continue" after which my phone booted back into Android:
https://forum.xda-developers.com/moto-z/help/bricked-moto-z-unlocking-bootlader-t3634701
My phone status was then: Stock Android 7.0.0, no_verity patch (no encryption), stock recovery, unlocked bootloader.
So my phone is about as close to stock as I can get it with unlocked bootloader.
I finally attempted to install the 7.1.1 OTA again. It reboots and indicates that it is installing and then pops up with a message that says "Error".
Pressing the power and up button brings up the recovery screen with the error log (with info that I don't understand) and from there I can reboot into system again where I get another message indicating that the update failed and no changes were made.
I'm hesitant to install RETBR or other non-RETEU roms (Because although they might work, there probably are some differences such as LTE bands etc. and they are not actually correct for my phone) so I'm not sure how else to get to 7.1.1 unless the wifi issue is resolved with the image that Erfanoabdi uploaded in another thread or Lenovo releases an official 7.1.1 firmware package for the RETEU model.
Byte_76 said:
.....
To recover, I used TWRP to wipe/format the Data partition and then flashed the no_verity zip file from the thread below which disables encryption.........
Click to expand...
Click to collapse
You still have a modified ROM as you flashed "no_verity patch"
The best for you would be to search for your version of ROM and FASTBOOT FLASH everything back.
Then see if the 7.1.1 OTA wants to stick.
bert269 said:
You still have a modified ROM as you flashed "no_verity patch"
The best for you would be to search for your version of ROM and FASTBOOT FLASH everything back.
Then see if the 7.1.1 OTA wants to stick.
Click to expand...
Click to collapse
So far I have been unable to find the official RETEU firmware from Adnroid 7.0.0 and I'm hesitant to flash the firmware for another region because it isn't technically correct for my phone and there are likely small differences that might become an issue at a later stage. (Maybe the LTE bands are different etc...)
Byte_76 said:
So far I have been unable to find the official RETEU firmware from Adnroid 7.0.0 and I'm hesitant to flash the firmware for another region because it isn't technically correct for my phone and there are likely small differences that might become an issue at a later stage. (Maybe the LTE bands are different etc...)
Click to expand...
Click to collapse
The LTE band on RETEU is 20 and stays 20 with RETBR. No change and everything works. No issues with LTE.
As I mentioned before, the RETBR version is the only working 7.0 backup for RETEU devices. After flashing RETBR , the softwarechannel changed automatically into RETEU. With this, i took the OTA 7.1.1.
Btw. the 7.1.1 OTA doesn't even change the boot loader Nr.( 0x9107). That means, if you mess up with 7.1.1 you can safely downgrade to 7.0 by flashing RETBR (and take a fresh 7.1.1 OTA again)
Did that twice without issues.(for security reason i always skip the two lines with "bootloader" and "gpt" at the top of the flash commands)
bullfinch110 said:
The LTE band on RETEU is 20 and stays 20 with RETBR. No change and everything works. No issues with LTE.
As I mentioned before, the RETBR version is the only working 7.0 backup for RETEU devices. After flashing RETBR , the softwarechannel changed automatically into RETEU. With this, i took the OTA 7.1.1.
Btw. the 7.1.1 OTA doesn't even change the boot loader Nr.( 0x9107). That means, if you mess up with 7.1.1 you can safely downgrade to 7.0 by flashing RETBR (and take a fresh 7.1.1 OTA again)
Did that twice without issues.(for security reason i always skip the two lines with "bootloader" and "gpt" at the top of the flash commands)
Click to expand...
Click to collapse
Thank you for the clarification. I will take your advice and flash the RETBR firmware.
---------- Post added at 08:40 PM ---------- Previous post was at 08:01 PM ----------
bullfinch110 said:
The LTE band on RETEU is 20 and stays 20 with RETBR. No change and everything works. No issues with LTE.
As I mentioned before, the RETBR version is the only working 7.0 backup for RETEU devices. After flashing RETBR , the softwarechannel changed automatically into RETEU. With this, i took the OTA 7.1.1.
Btw. the 7.1.1 OTA doesn't even change the boot loader Nr.( 0x9107). That means, if you mess up with 7.1.1 you can safely downgrade to 7.0 by flashing RETBR (and take a fresh 7.1.1 OTA again)
Did that twice without issues.(for security reason i always skip the two lines with "bootloader" and "gpt" at the top of the flash commands)
Click to expand...
Click to collapse
I cannot get RSDLite to detect my phone in fastboot mode so I guess I'm going to have to run the fastboot commands manually.
What do you mean about skipping the bootloader and gpt commands? If I skip those, I keep my stock "unlocked bootloader" and "gpt" but then the phone probably won't boot again because that is very much like what I have now except that I flashed the no_verity patch when my phone would not boot.
What exactly are you avoiding by skipping those two lines? Should I skip them too?
---------- Post added at 08:46 PM ---------- Previous post was at 08:40 PM ----------
Byte_76 said:
Thank you for the clarification. I will take your advice and flash the RETBR firmware.
---------- Post added at 08:40 PM ---------- Previous post was at 08:01 PM ----------
I cannot get RSDLite to detect my phone in fastboot mode so I guess I'm going to have to run the fastboot commands manually.
What do you mean about skipping the bootloader and gpt commands? If I skip those, I keep my stock "unlocked bootloader" and "gpt" but then the phone probably won't boot again because that is very much like what I have now except that I flashed the no_verity patch when my phone would not boot.
What exactly are you avoiding by skipping those two lines? Should I skip them too?
Click to expand...
Click to collapse
Are these the commands that I should run?
fastboot flash partition gpt.bin
fastboot flash motoboot boot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Byte_76 said:
Thank you for the clarification. I will take your advice and flash the RETBR firmware.
---------- Post added at 08:40 PM ---------- Previous post was at 08:01 PM ----------
I cannot get RSDLite to detect my phone in fastboot mode so I guess I'm going to have to run the fastboot commands manually.
What do you mean about skipping the bootloader and gpt commands? If I skip those, I keep my stock "unlocked bootloader" and "gpt" but then the phone probably won't boot again because that is very much like what I have now except that I flashed the no_verity patch when my phone would not boot.
What exactly are you avoiding by skipping those two lines? Should I skip them too?
Click to expand...
Click to collapse
It's out of my knowledge if your verity patch influences either bootloader or gpt partition. So i would recommend to flash those two commands in order to "repair" them. If you'll get an error message, skip them and proceed with the rest.
I always prefer RSD method instead of manually flashing by fastboot commands.
Have you installed the latest version of RSD-lite 6.2.4? Have you installed the latest moto drivers?
If you have extracted the RETBR. zip, search for "flashall.xml" file. Open it with a texteditor and you'll find the correct flashing commands.
Custom TWRP Recovery for Nokia 4.2 codename Panther
Firmware : 136
For September Security patch
Link: https://drive.google.com/drive/folders/1tqQVK_IAQLSq2RDHhPD_p3v7IEXkAwbI?usp=sharing
Request: Unlocked bootloader
How to install:
Go to bootloader/fastboot mode:
fastboot flash boot "path to twrp.img"
Control volume to "reboot recovery mode"
Done
It no support decrypt data at the moment. So,you need format data
fix slot on sep twrp
Added a/b slot. You can flash system,boot to a or b if you want
Update link tomorrow
Good news: Tree ready for build rom
Bad news: doesnt boot???
Hello, the TWRP link above is no longer available. Can you send it to my mailbox? Thank you! Email account: [email protected]
clurs said:
Hello, the TWRP link above is no longer available. Can you send it to my mailbox? Thank you! Email account: [email protected]
Click to expand...
Click to collapse
I sended a friend request in qq,check it
Is there a way to use this on october patch?
thegamingcat13 said:
Is there a way to use this on october patch?
Click to expand...
Click to collapse
I cant test it. My computer cant backup oct patch. I think you need ask calyx for it
thinhx2 said:
I cant test it. My computer cant backup oct patch. I think you need ask calyx for it
Click to expand...
Click to collapse
Ok thank you
Hello,
I want to port TWRP to my Nokia 3.2. how did you port it? Or what's the procedure?
Thanks
s3tupw1zard said:
Hello,
I want to port TWRP to my Nokia 3.2. how did you port it? Or what's the procedure?
Thanks
Click to expand...
Click to collapse
send me boot.img of 4.2
Hi, I've uploaded the firmware here:
https://drive.google.com/file/d/1jJkDi807fagKFJ1ggzFY1Lc4TGY-llEB/view
If you don't want to download the whole firmware I'll upload the boot.img file when I'm at home on my computer.
Thanks
---------- Post added at 10:07 AM ---------- Previous post was at 09:57 AM ----------
Btw. Could you write a guide on how to Port TeamWin for Android One devices? I think it would be interesting for other people who don't have TeamWin for their Android One devices.
---------- Post added at 10:42 AM ---------- Previous post was at 10:07 AM ----------
I got the boot img from my system using dd. I packed boot_a and boot_b into a rat file
https://drive.google.com/file/d/1-DRQ_LRdEMez-Qpj2jboJsDysG5awl_b/view?usp=drivesdk
Hi,
how did you port TWRP to Nokia 4.2 ? Is there a guide on how to do this ?
bro can u please how to use the files??!!
Any news on this
Which variants of the 4.2 will this work on?
doesnt work just stuck on twrp loading
Hi everyone. I am trying to install twrp but stuck at fastboot menu.
I have unlocked bootloader, because it says device state: unlocked. Then i am trying to fastboot flash but get error. I am trying flash:raw and set_active a and b. I try boot recovery.img. no matter what I do the phone restarts, shows android logo and then go back to fastboot. Fastboot devices shows the phone. What am I missing? Wrong files, wrong order, any better guide or files to test? I am not sure what I have done also flashed a vbmedia file
I have unlocked the bootloader after that I have installed the twrp and wanted to have the magisk too.
but unfortunately when flashed magisk zip phone got bricked and didnt boot into recovery just go into fastboot (btw the recovery i flashed was also temporary as it has been gone every time i restart and i have to again reflash the recovery) kindly help me how to unbrick my phone????? tried many method found online all in vain.
I was using realme ui 1.0.
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
donkeyman1234 said:
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
Click to expand...
Click to collapse
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
So you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
rename ozip to zip, see if twrp works? And can you show me your phone version?
donkeyman1234 said:
So you have global version then you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do, because I can't unlock the bootloader for my global version. Maybe you can show us how you unlock the global version steps by steps.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
rename ozip to zip, see if twrp works? And can you show me your phone version?
Click to expand...
Click to collapse
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Sajidmaibal said:
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Click to expand...
Click to collapse
unlocking bootlaoder is easy
1. you need in dept test app latest one
2. submit for review
3. review will get successful in 10/20 mins
4. then just follow the normal procedure for unlocking
kindly follow these vidoes for reference
https://youtu.be/dW4yKt6Xtss
https://youtu.be/V-4ArXEmySM
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
So you hard bricked you phone by locking bootloader.
Maybe you should take it to service center.
Flash twrp 3316 IMG..it will flash ozip
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
XDA seems pretty dead these days. Shame.
J-Mizzle said:
XDA seems pretty dead these days. Shame.
J-Mizzle said:
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
Click to expand...
Click to collapse
it happened to me too. i can help you. first boot into fastboot and use ur computer to flash twrp using command "fastboot flash recovery (attach twrp img here) then boot into recovery which should be twrp and then download orangefox recovery for realme xt. it should be a zip file so just install it using twrp. Then get the official realme xt ozip from their website boom orangefox should install it then wipe data once again.. then start your system. if it goes into recovery again just wipe data again and it should work.
Click to expand...
Click to collapse
any update here guys? bricked my phone on relocking bootloader.