Hi all. I've been looking for the perfect clear case that's slim and has an opening for the magnetic port. The only ones I've found so far had the top and bottom front edges exposed, which has already resulted in scuffing the edges. Does anyone have any recommendations? Thanks.
Related
Hi All,
Has anyone tried the Amzer Shellster case (AMZ93090)? I ordered a unit to try it out and I love the belt clip part of the case. However, the part of the case that wraps around and protects the backside of the phone is slightly too small - instead of grasping firmly around both sides of the phone, one side is held on by the buttons instead.
Amzer is sending a replacement unit, so hopefully it is a one-off defect, but I'm curious to know if anyone else here has given this case a try.
Thanks!
garfunkel99 said:
Hi All,
Has anyone tried the Amzer Shellster case (AMZ93090)? I ordered a unit to try it out and I love the belt clip part of the case. However, the part of the case that wraps around and protects the backside of the phone is slightly too small - instead of grasping firmly around both sides of the phone, one side is held on by the buttons instead.
Amzer is sending a replacement unit, so hopefully it is a one-off defect, but I'm curious to know if anyone else here has given this case a try.
Thanks!
Click to expand...
Click to collapse
i have a friend using this case on his i9100. says its great, so maybe that was a one off defect
I received the replacement last week and it definitely fits better. I like how the case feels in my hand.
However, I was surprised to see that the amzer case does not wrap around the front edges of the phone. If I set the phone down with the screen facing downward the glass would be touching the table.
While waiting for the replacement I used the belt clip with a backside case from body glove. It is nothing special, but it does wrap around the front edges of the phone and it fits in the amzer holster.
From an Omega'd ICS i777
Hello everyone!
I am looking for something special, it's bugging me that no flip case I've found got a cutout for the LED light in the top left corner of the phone.
I've tried to make one on my own by drilling a hole in the case I've got and put a little plastic tube in there to get the light through it. It was good but then again, it's not factory made and it doesn't look that good as I wished for. Then I just cutout a piece of the top left corner of the flip case and again, it looks aweful but it does the job.
So my question is, are there any flip cases out there that got a little hole for the LED light? It would be great if it were an S-View cover as well but it's okay if it doesn't have S-View.
Additional question: Does anyone of you got the Spigen S-View flip case? If so, is the front made out of metal or plastic? I'm thinking about buying one and then drilling a better hole since metal is easier to handle than plastic.
Thanks in advance, BunnyPig!
BunnyPig said:
Hello everyone!
I am looking for something special, it's bugging me that no flip case I've found got a cutout for the LED light in the top left corner of the phone.
I've tried to make one on my own by drilling a hole in the case I've got and put a little plastic tube in there to get the light through it. It was good but then again, it's not factory made and it doesn't look that good as I wished for. Then I just cutout a piece of the top left corner of the flip case and again, it looks aweful but it does the job.
So my question is, are there any flip cases out there that got a little hole for the LED light? It would be great if it were an S-View cover as well but it's okay if it doesn't have S-View.
Additional question: Does anyone of you got the Spigen S-View flip case? If so, is the front made out of metal or plastic? I'm thinking about buying one and then drilling a better hole since metal is easier to handle than plastic.
Thanks in advance, BunnyPig!
Click to expand...
Click to collapse
I ditched my flip case for a wallet/card holder/media stand by Cellairis.
I got this case yesterday and after two days am happy with it so far. It is a clear hard plastic case with TPU material on the front lip, corners, around all opening, and parts of the back. This is different than anything I have tried before, but it is a very nice case. Top quality manufactured and nice looking. It is stiff, but very easy to put the phone in. It takes a small amount of force to remove it, so the phone will not pop out easily if dropped. I'm using a Spigen Curved Crystal HD screen protector on the phone, there is no issues with this case and the protector. There is a bit of texture on the sides so it makes the case easy to hold onto without fear of it slipping out of your hands. This case is a great size, not a think and bulky one.
The only small thing I can say may be a negative is the clear hard plastic does show a few oily finger smudges, but wipes off very easily.
I highly recommend this case.
I was wondering if anyone had recommendations on a TPU Gel Case, I was looking for something with a low profile that still gives solid protection without blocking to much of the "edge" display.
I have seen a couple a couple from Spigen and LK that look promising, but was wondering if anyone has first-hand experience with a good case. The main things I want are
1. Grippy/Flexible TPU
2. Protection of the frame at top/bottom
3. Lots of lift on top/bottom or corners to give clearance if you lay the phone flat on the screen
4. Full access to screen (cover the least amount of edge function as necessary)
5. As thin a profile as possible with the other requirements
https://www.amazon.com/Spigen-Crystal-Glitter-Protection-Premium/dp/B06XP41W7Y
https://www.amazon.com/Spigen-Surface-Excellent-Compatible-Samsung/dp/B06XP54BCW
https://www.amazon.com/Spigen-Crystal-Protection-Premium-Clarity/dp/B06XP6KZKC
https://www.amazon.com/LK-Scratch-Resistant-Silicone-Protective/dp/B01N9SJB3J
Thanks in advance
I have about a dozen cases and this is one of my favorites. Great price and great quality.
https://www.amazon.com/TUDIA-Galaxy...=UTF8&qid=1494359654&sr=1-4&keywords=tudia+s8
Does that Tudia case have any grip?
I'm looking for a S8 case that's like the Apple 7+ silicone case if you know how grippy those are.
SLMcc said:
Does that Tudia case have any grip?
I'm looking for a S8 case that's like the Apple 7+ silicone case if you know how grippy those are.
Click to expand...
Click to collapse
Not familiar with those, but the Tudia has etched sides to add grip. Some others I have are smooth and can be a bit slippery. The Tudia feels great in the hand.
arampapaz said:
Not familiar with those, but the Tudia has etched sides to add grip. Some others I have are smooth and can be a bit slippery. The Tudia feels great in the hand.
Click to expand...
Click to collapse
Okay, thanks. They are more like silicone than TPU and have awesome grip. They have a microfiber lining too so they don't leave marks, etc on the back of the phone. I'm looking for something like that if I can find one.
Nillkin nature, best case ever. If you give a try, you will use it in all your phones in the future. I used it with my last 3 phones.
Moreover, the case fixes the Fingerprint failed location issue. You will never touch your camera lens anymore.
adrimg01 said:
Nillkin nature, best case ever. If you give a try, you will use it in all your phones in the future. I used it with my last 3 phones.
Moreover, the case fixes the Fingerprint failed location issue. You will never tiuch your camera lens anymore.
Click to expand...
Click to collapse
I agree! I just received my Nillkin Nature case (clear) and it's the best! :good:
Thanks for the suggestions guys, I was looking for something with a style similar to the Nillkin, Silicone iPhone cases that you described.
I definitely like the idea of having the camera and sensors separated on the back. My one concern for the Nillkin is about screen protection. Is the lip on the top/bottom substantial enough to protect the screen?
https://www.amazon.com/Galaxy-Nillkin-Nature-Clear-Samsung/dp/B06ZZBRNK2?th=1
I was also looking at this case which wraps over the top and bottom bezels and at least seems like it might give more protection, although it doesn't separate the sensors on the back
https://www.amazon.com/LK-Scratch-Resistant-Silicone-Protective/dp/B01N6RRU2D?th=1
Or this one which is similar to the Nillkin, but has more corner protection
https://www.amazon.com/DAUPIN-Crystal-Protection-Premium-Clarity/dp/B06Y2S81VG
Thanks again for the help
i recommend the Ringke Fusin case.. its fit perfectully to all ur's demands.. im using it since i got my S8 (a month ago) and absolutly love it
1. Grippy/Flexible TPU
2. Protection of the frame at top/bottom
3. Lots of lift on top/bottom or corners to give clearance if you lay the phone flat on the screen
4. Full access to screen (cover the least amount of edge function as necessary)
5. As thin a profile as possible with the other requirements
https://www.amazon.com/Ringke-Trans...qid=1494594537&sr=1-1&keywords=ringke+s8&th=1
Pl2lNCE said:
Thanks for the suggestions guys, I was looking for something with a style similar to the Nillkin, Silicone iPhone cases that you described.
I definitely like the idea of having the camera and sensors separated on the back. My one concern for the Nillkin is about screen protection. Is the lip on the top/bottom substantial enough to protect the screen?
https://www.amazon.com/Galaxy-Nillkin-Nature-Clear-Samsung/dp/B06ZZBRNK2?th=1
I was also looking at this case which wraps over the top and bottom bezels and at least seems like it might give more protection, although it doesn't separate the sensors on the back
https://www.amazon.com/LK-Scratch-Resistant-Silicone-Protective/dp/B01N6RRU2D?th=1
Or this one which is similar to the Nillkin, but has more corner protection
https://www.amazon.com/DAUPIN-Crystal-Protection-Premium-Clarity/dp/B06Y2S81VG
Thanks again for the help
Click to expand...
Click to collapse
If you put your phone face down with the Nillkin nature case, the screen doesn't touch the surface, so the lip on the top and bottom are enough.
But what I like the most of this case, is how are separated the camera and the Fingerprint sensor. The hole for the camera is so small that is no possible to touch the camera lens anymore (unless you have a very thin finger). On the other hand is the Fingerprint sensor hole so big, that your finger falls naturally in the right position, while without a case the 50% the times is touching the camera.
Between, if you have the midnight black version and you decide to get the Nillkin, go for the grey one. It looks awesome and much better than the clear one.
Im looking for a thin plastic case like the Spigen thin fit that only covers the first little bit on each corners. Like how the think fits cutout starts near the volume rocker, just that little bit on each side near the coners.
neotekz said:
Im looking for a thin plastic case like the Spigen thin fit that only covers the first little bit on each corners. Like how the think fits cutout starts near the volume rocker, just that little bit on each side near the coners.
Click to expand...
Click to collapse
Nillkin Super frosted shield.
It's good and durable!! Worth the money.
prithivraj said:
Nillkin Super frosted shield.
It's good and durable!! Worth the money.
Click to expand...
Click to collapse
The side coverage is about the same as the spigen thin fit. Im looking for one that doesnt have any side coverage except for near the corners.
This is what I'm using - I love it. It does have some side coverage, but a little less than most ive tried.
https://www.amazon.com/Bear-Motion-...qid=1495483415&sr=8-1&keywords=s8+bear+motion
Spigen AirSkin.
--
Update:
Pls take a look at Pitaka cases:
https://www.amazon.com/dp/B071HYN55R/_encoding=UTF8?coliid=I2QI2O5D42I5UZ&colid=1EPNVNLZWP5WQ