Related
Hey y'all! Sorry to bug ya, but my XT1528 Vz Moto E is wifi-less I was tinkering around, trying to get s-off through a combination of sunshine+kingroot, and when I mucked that up, I just restored to the stock rom posted on Mega. Unfortunately, alot of errors popped up in fastboot and now wifi is unusable :crying: DOES ANYBODY KNOW HOW TO FIX THIS?
You restored the same version firmware you had when you bought it ?
Or a newer version or alternate carrier version ?
Also did you have 5.0 originally then put on 5.1 ?
I screwed up my wifi before doing that eh..
Make sure you have Otus or Surnia properly picked out (for which you have / need)
brookemels said:
Hey y'all! Sorry to bug ya, but my XT1528 Vz Moto E is wifi-less I was tinkering around, trying to get s-off through a combination of sunshine+kingroot, and when I mucked that up, I just restored to the stock rom posted on Mega. Unfortunately, alot of errors popped up in fastboot and now wifi is unusable :crying: DOES ANYBODY KNOW HOW TO FIX THIS?
Click to expand...
Click to collapse
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
cmason37 said:
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
Click to expand...
Click to collapse
You can't even unlock the bootloader on the VZ variant or mount system as r/w, so not sure what their S-off attempt did.
Ace42 said:
You can't even unlock the bootloader on the VZ variant or mount system as r/w, so not sure what their S-off attempt did.
Click to expand...
Click to collapse
Whatever he did, he most likely permanently screwed his phone up.
xpmule said:
You restored the same version firmware you had when you bought it ?
Or a newer version or alternate carrier version ?
Also did you have 5.0 originally then put on 5.1 ?
I screwed up my wifi before doing that eh..
Make sure you have Otus or Surnia properly picked out (for which you have / need)
Click to expand...
Click to collapse
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
cmason37 said:
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
Click to expand...
Click to collapse
If I'm not mistaken, the Vz Moto E would be able to have S-off except there's no way to achieve even temp root on 5.1
cmason37 said:
Whatever he did, he most likely permanently screwed his phone up.
Click to expand...
Click to collapse
Sorry, but my phones up an running again also, I'm a girl xD
brookemels said:
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
Click to expand...
Click to collapse
Hi,
I am in a similar solution, can you send me the link for the verizon xt1528. THank you very much
brookemels said:
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
Click to expand...
Click to collapse
I also disabled my Wi-Fi accidentally. I had to get a new Moto E to replace it -- what did you do to restore it? Could you kindly detail the steps for noobs?
andxdrewx said:
I also disabled my Wi-Fi accidentally. I had to get a new Moto E to replace it -- what did you do to restore it? Could you kindly detail the steps for noobs?
Click to expand...
Click to collapse
Hey y'all! Sorry for silent! In between college and looking for exploits in the XT1528 bootloader, I have had NO time whatsoever :crying: Its rather aggravating, these variants of popular phones with locked down bootloaders! but after seeing Moto unlock the Vz X 2014 bl, I remain hopeful!
In order to do a proper restore, you need to get the XT1528_SURNIA_VERIZON_5.1_LPI23.29-17.5_cid2_subsidy-DEFAULT_CFC.xml.zip file from FileFactory/MEGA (link down bellow)
Flash in this order;
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase carrier
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
Unfortunately, this will mean loosing your data, but better than a shiny brick!
MEGA: https://mega.nz/#F!p9sxCaqR!Ja2kfKiL_0Hi3_SsKizjKw!FlMx1A5R
FileFactory: http://www.filefactory.com/file/233...PI23.29-17.5_cid2_subsidy-DEFAULT_CFC.xml.zip
HAPPY FLASHING!
Hello there,
My op2 doesn't boot... I tried to use recovery tool and it was successful but...
One time H2 OS animation came up but it locked and I did same again... This time it didn't even boot.
I went into recovery mode of Op2 and tried to sideload a rom but it failed at 92% for several times and several roms.
Sometimes I turn on the phone it only shows Linux's logo.
Do you think it's a hardware problem?
12parsa said:
Hello there,
My op2 doesn't boot... I tried to use recovery tool and it was successful but...
One time H2 OS animation came up but it locked and I did same again... This time it didn't even boot.
I went into recovery mode of Op2 and tried to sideload a rom but it failed at 92% for several times and several roms.
Sometimes I turn on the phone it only shows Linux's logo.
Do you think it's a hardware problem?
Click to expand...
Click to collapse
Try this: https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Or do a full wipe and flash this rom and transfer for it through mtp on twrp from your pc: http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
Or you can flash a stock rom through fastboot: http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
Dead oneplus2.
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
I finally fixed my OP2...
I used one of recovery tools and then I flashed TWRP v 3...
Then I wiped all data and installed new os
12parsa said:
I finally fixed my OP2...
I used one of recovery tools and then I flashed TWRP v 3...
Then I wiped all data and installed new os
Click to expand...
Click to collapse
so your both imei is back?
lockmunk said:
so your both imei is back?
Click to expand...
Click to collapse
No,
They're lost
12parsa said:
I finally fixed my OP2...
I used one of recovery tools and then I flashed TWRP v 3...
Then I wiped all data and installed new os
Click to expand...
Click to collapse
12parsa said:
No,
They're lost
Click to expand...
Click to collapse
you lost your imei but you can make call now?
whats your mean by "finally fixed"?
lockmunk said:
you lost your imei but you can make call now?
whats your mean by "finally fixed"?
Click to expand...
Click to collapse
I can't call because I can't connect to any network because of missing IMEI.
"Finally fixed" means It can boot and run without problem now.
12parsa said:
I can't call because I can't connect to any network because of missing IMEI.
"Finally fixed" means It can boot and run without problem now.
Click to expand...
Click to collapse
Follow this step and ur IMEI should back.
Run the following fastboot cmd
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Jyoti_re said:
Follow this step and ur IMEI should back.
Run the following fastboot cmd
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Click to expand...
Click to collapse
i lost my IMEI slot 2..IMEI slot 1 already ok now.
lockmunk said:
i lost my IMEI slot 2..IMEI slot 1 already ok now.
Click to expand...
Click to collapse
After fastboot erase commands?
Jyoti_re said:
Follow this step and ur IMEI should back.
Run the following fastboot cmd
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Click to expand...
Click to collapse
12parsa said:
After fastboot erase commands?
Click to expand...
Click to collapse
actually that command kills both my imei. but i recovered back my imei1 by reset through qualcomm unbrick method.
now only imei2 not recovered. now if i use the above commands, my imei1 not lost but imei2 still not back.
lockmunk said:
actually that command kills both my imei. but i recovered back my imei1 by reset through qualcomm unbrick method.
now only imei2 not recovered. now if i use the above commands, my imei1 not lost but imei2 still not back.
Click to expand...
Click to collapse
I also lost IMEI 2, after using these fastboot commands,
Did you find any solution ?
osr.arora said:
I also lost IMEI 2, after using these fastboot commands,
Did you find any solution ?
Click to expand...
Click to collapse
as for now, no solution. the IMEI2 shows 0. but if we put dual sim, it works
http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
This will definitely help
Sent from my ONE A2003 using XDA-Developers mobile app
lockmunk said:
as for now, no solution. the IMEI2 shows 0. but if we put dual sim, it works
Click to expand...
Click to collapse
I have dual sims inserted, & 2nd sim shows 0 network bars.
As the title says.
Does anybody have any updated Radio / bootloader zips that I can flash via TWRP ?
I have an old Moto E Condor and I can't get the phone to recognize the Sim so was wondering if updating the radio / bootloader would help ?
I'm running out of ideas.
I have tried Android 6 & 7 tried different Sims.
I'm not sure how I would find out if it's a hardware issue rather than software ?
Any ideas ?
Thanks
Check this link for Radio file
https://forum.xda-developers.com/devdb/project/dl/?id=13877
I didn't got what bootloader you are talking about. But if you want latest twrp then check this link
https://dl.twrp.me/condor/twrp-3.1.0-0-condor.img.html
Ankit_29 said:
Check this link for Radio file
https://forum.xda-developers.com/devdb/project/dl/?id=13877
I didn't got what bootloader you are talking about. But if you want latest twrp then check this link
https://dl.twrp.me/condor/twrp-3.1.0-0-condor.img.html
Click to expand...
Click to collapse
Thanks mate.
I will give it a go
I had the same problem with my condor ,but flashing the "radio files" didn't help the case ,it always failed in my case ,so the best advice I can give you is to not flash isolated radio files ,but to backup your data and flash stock ROM for your device,trust me it'll save you a lot of headache
Akshay_92 said:
I had the same problem with my condor ,but flashing the "radio files" didn't help the case ,it always failed in my case ,so the best advice I can give you is to not flash isolated radio files ,but to backup your data and flash stock ROM for your device,trust me it'll save you a lot of headache
Click to expand...
Click to collapse
Thanks for that info.
You say that you had the same problem? Have you sorted it out now ?
When you flashed the stock ROM
Did you have to do this via fastboot ??
Thanks again
johnhux7 said:
Thanks for that info.
You say that you had the same problem? Have you sorted it out now ?
When you flashed the stock ROM
Did you have to do this via fastboot ??
Thanks again
Click to expand...
Click to collapse
Yes,my device is good as new,I'm writing this message from it so haha...you can find the appropriate stock ROM to flash here
https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
If you don't know which ROM to download, got to your phones settings >about phone>build number
And download the specific ROM with that build number,now be absolutely sure to not flash a KitKat ROM on a device that was upgraded to lollipop earlier, its absolutely essential as it 100% will brick your device,
As for your question, yes you will need to be in fastboot to flash the ROM,and the program that you'll need to flash the ROM with is called mfastboot-v2 you can find it here
https://forum.xda-developers.com/general/rooting-roms/using-mfastboot-exe-to-unbrick-motorola-t3203518
Now after downloading both the ROM and mfastboot ,extract both of them into the same folder of your PC ,after doing that ,go into that folder and hold shift+right mouse key and select "open new command window here" from the dialogue box ,now assuming that you have downloaded the drivers for your phone , switch off your phone ,go into mfastboot mode by holding power key + volume down key for about 5-7seconds, now connect your phone to the PC with the help of USB cable and in the command window type "mfastboot devices" if everyw is done correctly it will show your device's name in an alphanumeric format under "list of devices" after that follow these commands in the ORDER! that they are written and you will be good to go :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
NOTE:- number of sparsechunk files may be different for your version (check the files extracted from the ROM inside the same folder to see the order of numbers) so if the numbers are like 0,1,2,3,4 flash them in that order ,I have named it 1,2,3 in the command above for illustrations, good luck if you will do this correctly, you'll be back to a facotory version of your phone,with the imei problem fixed , another thing though, you'll lose your custom recovery so after you flash this stock ROM ,you'll have to flash the custom recovery again,
Cheers!!
Akshay_92 said:
Yes,my device is good as new,I'm writing this message from it so haha...you can find the appropriate stock ROM to flash here
https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
If you don't know which ROM to download, got to your phones settings >about phone>build number
And download the specific ROM with that build number,now be absolutely sure to not flash a KitKat ROM on a device that was upgraded to lollipop earlier, its absolutely essential as it 100% will brick your device,
As for your question, yes you will need to be in fastboot to flash the ROM,and the program that you'll need to flash the ROM with is called mfastboot-v2 you can find it here
https://forum.xda-developers.com/ge...ng-mfastboot-exe-to-unbrick-motorola-t3203518
Now after downloading both the ROM and mfastboot ,extract both of them into the same folder of your PC ,after doing that ,go into that folder and hold shift+right mouse key and select "open new command window here" from the dialogue box ,now assuming that you have downloaded the drivers for your phone , switch off your phone ,go into mfastboot mode by holding power key + volume down key for about 5-7seconds, now connect your phone to the PC with the help of USB cable and in the command window type "mfastboot devices" if everyw is done correctly it will show your device's name in an alphanumeric format under "list of devices" after that follow these commands in the ORDER! that they are written and you will be good to go :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
NOTE:- number of sparsechunk files may be different for your version (check the files extracted from the ROM inside the same folder to see the order of numbers) so if the numbers are like 0,1,2,3,4 flash them in that order ,I have named it 1,2,3 in the command above for illustrations, good luck if you will do this correctly, you'll be back to a facotory version of your phone,with the imei problem fixed , another thing though, you'll lose your custom recovery so after you flash this stock ROM ,you'll have to flash the custom recovery again,
Cheers!!
Click to expand...
Click to collapse
Thanks so much for taking the time to write this for me.
I'm new to using fastboot I got spoiled by using ODIN with Samsung whist I was learning.
Just one question.
Do you put in each of those commands and press enter after each one ?
johnhux7 said:
Thanks so much for taking the time to write this for me.
I'm new to using fastboot I got spoiled by using ODIN with Samsung whist I was learning.
Just one question.
Do you put in each of those commands and press enter after each one ?
Click to expand...
Click to collapse
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one
Sent from my Moto G (4) using Tapatalk
---------- Post added at 06:43 PM ---------- Previous post was at 06:39 PM ----------
Akshay_92 said:
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one ...It's alright man,we all are new to some stuff at one point,do let me know if you come into a hiccup
Cheers!
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one
Click to expand...
Click to collapse
I though so.
Was just checking.
I'm going to have some fun doing this
Love learning some thing new
The Moto is my spare phone so I can practice on that before getting stuck into fastboot on my Honor 8
johnhux7 said:
I though so.
Was just checking.
I'm going to have some fun doing this
Love learning some thing new
The Moto is my spare phone so I can practice on that before getting stuck into fastboot on my Honor 8
Click to expand...
Click to collapse
[emoji1] yep absolutely,
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
[emoji1] yep absolutely,
Click to expand...
Click to collapse
Thank you so much for sharing your knowledge.
It's what I love about this XDA community
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
ramsut said:
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
Click to expand...
Click to collapse
Flash stock/custom ROM
ramsut said:
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
Click to expand...
Click to collapse
Hmm....Well this is certainly not professional and quite unfortunate,on the part of the service center employees,but since I assume that it's no longer under warranty and they won't take back the Devi because it's unlocked now and also because they won't take responsibility for it ,the best you can do is flash stock ROM,I have explained that earlier in this thread ...
Cheers!! And let me know how it went
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
Hmm....Well this is certainly not professional and quite unfortunate,on the part of the service center employees,but since I assume that it's no longer under warranty and they won't take back the Devi because it's unlocked now and also because they won't take responsibility for it ,the best you can do is flash stock ROM,I have explained that earlier in this thread ...
Cheers!! And let me know how it went
Click to expand...
Click to collapse
I got the SIM working.
Followed your instructions.
Got the phone back to stock
All good thanks for your help
John
Hello everyone, after unlock procedure and install global stable 9.5.3.0, i lost sim card detection and no signal.
I have a routine to make sim card detectable and signal on. (I have a rooted rom, and unlocked my phone)
First step :
Connect phone with USB
On pc with adb cmd :
adb shell
su
dd if=/dev/zero of=/dev/block/mmcblk0p13
dd if=/dev/zero of=/dev/block/mmcblk0p14
dd if=/dev/zero of=/dev/block/mmcblk0p16
Reboot the phone
At this point i lost IMEI (IMEI 0) but my SIM card is detected.
Second step :
put phone on fastboot mod
On pc fastboot cmd :
fastboot flash modem NON-HLOS.bin
Start phone
Third step :
On pc adb cmd :
adb shell
su
setprop sys.usb.config diag,adb
With QPST on PC, i restore a qcn file found here androidfilebox.com/app/redmi-5-plus-modem-firmware , MEG7 modem version.
Reboot the phone.
Here, SIM card detected and Signal ON, so all is OK.
BUT Fourth step :
When i reboot the phone , i get back to no sim card detected, and i have to repeat the process. :s
So my question is how could i keep my settings and get full use of my phone even if i reboot...
Sorry for my english, i'm trying my best here
i have the same issue on my Zuk Z2, but i haven't make it;
if you could read chinese, maybe this wil be helpful for you.
club.lenovo.com.cn/thread-4224052-1-1.html
Still need help
Aaaaaand still need help
Dini62 said:
Hello everyone, after unlock procedure and install global stable 9.5.3.0, i lost sim card detection and no signal.
I have a routine to make sim card detectable and signal on. (I have a rooted rom, and unlocked my phone)
First step :
Connect phone with USB
On pc with adb cmd :
adb shell
su
dd if=/dev/zero of=/dev/block/mmcblk0p13
dd if=/dev/zero of=/dev/block/mmcblk0p14
dd if=/dev/zero of=/dev/block/mmcblk0p16
Reboot the phone
At this point i lost IMEI (IMEI 0) but my SIM card is detected.
Second step :
put phone on fastboot mod
On pc fastboot cmd :
fastboot flash modem NON-HLOS.bin
Start phone
Third step :
On pc adb cmd :
adb shell
su
setprop sys.usb.config diag,adb
With QPST on PC, i restore a qcn file found here androidfilebox.com/app/redmi-5-plus-modem-firmware , MEG7 modem version.
Reboot the phone.
Here, SIM card detected and Signal ON, so all is OK.
BUT Fourth step :
When i reboot the phone , i get back to no sim card detected, and i have to repeat the process. :s
So my question is how could i keep my settings and get full use of my phone even if i reboot...
Sorry for my english, i'm trying my best here
Click to expand...
Click to collapse
Read you message.
In reality I never went through something like this on my note 3. My best guess the qcn file you used is not compatible and efs may be corrupted too.
Many users were facing issues like this so I made a thread to help them. Some users reported a permanent fix while some were never able to get it to work.
Possible fix:
Find a backup of modemst1 modemst2 and fsg from another user if he/she may be willing to share.
Flash the files using fastboot command.
Fastboot flash modemst1 modemst1 and so on.
And then change IMEI and Mac address manually.
Worst case scenario:
You may need a motherboard replacement if nothing works.
But I think it is possible that your efs partition as a whole is corrupted.
adb shell
su
dd if=/dev/zero of=/dev/block/mmcblk0p13
dd if=/dev/zero of=/dev/block/mmcblk0p14
dd if=/dev/zero of=/dev/block/mmcblk0p16
These command erase the modemst1 and modemst2 and fsg partition that makes up the efs. What you need is these three partitions from someone else device that are not corrupt and flash them on your device.
For anymore help contact me on:
Telegram - Archit9169
WhatsApp - 9169834624
Thanks to answer, i'm gonna try to get those partitions, it could be hard
I'm facing very similar issue after an ota update. However, I get the sim detected on a simple reboot for a few minutes. Please update if the solution worked.
Hello. I'm facing similiar issue on MEG7 vince. I can't restart my phone because every time loses the baseband and sim detection. My rutine to get back is:
1.- Flash via trwp a shared good one similar EFS partition backup. With this step I recover the baseband and the sim detection BUT the status of SIMs are "radio off" don't have signal and can't do calls. (the IMEI remains despite the lost baseband)
2.- Flash via QPST a xqcn backup ( I founded 2 files on google). Reboot the phone. Sometimes the signal and baseband come back without problem BUT sometimes I back to the beggining, without baseband and sim detection. It's really annoying.
Now I have obtained a modemst1 modemst2 and fsg images of a identic model. My question: how to flash it? with twrp? fastboot? adb?
Thanks for the suggestions.
I'm facing the same thing but only on 2nd sim slot. The 1st slot work flawlessy. Switching sim card doesn't matter.
It recognizes the operator and imei but signal is gone!!! I've tryed everything, flashing miui 9.6.4, 8.8.2, via fastboot and test point!! Relocking bootloader... flashed 00000080_0.xqcn as well.
nothing has worked.
I haven't tryed your solution, can you share all files needed? Thanks.
Anyone can help me?
I don't think it's hardware issue, because Sim's operator is recognized... But signal strength always show -1dbm 99 asu, whatever I do in network type (global,LTE etc..) and only on 2nd slot.
cristhian7cz said:
Now I have obtained a modemst1 modemst2 and fsg images of a identic model. My question: how to flash it? with twrp? fastboot? adb?
Click to expand...
Click to collapse
Hello cristhian7cz , i still have this issue.
With your files, u could try Archit9169 solution :
"
Possible fix:
Find a backup of modemst1 modemst2 and fsg from another user if he/she may be willing to share.
Flash the files using fastboot command.
Fastboot flash modemst1 modemst1 and so on.
And then change IMEI and Mac address manually.
"
If you have issues, or don't know what to do, may u send me modemst1, modemst2 and fsg files you get ?
tried Archit9169 solution but still no luck
Ohh I'm not alone at least. Had this problem with my 1st simcard slot and so far I didnt find any solutions worked. Re-locking, upgrade and even downgrade, but nope
I hope someone enlighten us
[https://forum.xda-developers.com/re...xtracttarfork-process-error255-t3656328/page2
QUOTE=Rayquaza;77634878]Ohh I'm not alone at least. Had this problem with my 1st simcard slot and so far I didnt find any solutions worked. Re-locking, upgrade and even downgrade, but nope
I hope someone enlighten us[/QUOTE]
Bro is modem issue,i solve it with flashing NON-HLOS.bin extract from rom i am using when thing goes wrong,u can try with twrp but i use fastboot
Sent from my Redmi 5 Plus using XDA Labs
XavierBrian said:
[https://forum.xda-developers.com/re...xtracttarfork-process-error255-t3656328/page2
QUOTE=Rayquaza;77634878]Ohh I'm not alone at least. Had this problem with my 1st simcard slot and so far I didnt find any solutions worked. Re-locking, upgrade and even downgrade, but nope
I hope someone enlighten us
Bro is modem issue,i solve it with flashing NON-HLOS.bin extract from rom i am using when thing goes wrong,u can try with twrp but i use fastboot
Sent from my Redmi 5 Plus using XDA Labs
Click to expand...
Click to collapse
I'm running AOKP 8.1, do I need to flash that file from extracted rom I'm running at?
Rayquaza said:
I'm running AOKP 8.1, do I need to flash that file from extracted rom I'm running at?
Click to expand...
Click to collapse
Yeah u should! extract the rom look for that hlos thang
Sent from my Redmi 5 Plus using XDA Labs
i'm still trying to fix my phone.
if someone has a backup from modemst1 modemst2 and fsg, i'm searching for them
derekk75j said:
I'm facing the same thing but only on 2nd sim slot. The 1st slot work flawlessy. Switching sim card doesn't matter.
It recognizes the operator and imei but signal is gone!!! I've tryed everything, flashing miui 9.6.4, 8.8.2, via fastboot and test point!! Relocking bootloader... flashed 00000080_0.xqcn as well.
nothing has worked.
I haven't tryed your solution, can you share all files needed? Thanks.
Click to expand...
Click to collapse
Have you found a solution of your 2nd sim slot problem? I have the same problem
No, haven't tried yet. I would like follow this guide
https://youtu.be/PvvcQZfeqNI, but using a modem backup meg7 version (xqcn). But i have to repair my PC first. What did you try so far?
proyectos3d said:
Have you found a solution of your 2nd sim slot problem? I have the same problem
Click to expand...
Click to collapse
I can't believe!! I was on arrow os pie: i flashed miui am founded here
and then magisk 17.3 and voilà: my 2nd slot sim has back again, and works flawlessly!!
DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO X4:
Download Moto X4 Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
Code:
[/B]
fastboot devices
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase clogo
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
pause>nul
DOWNLOADS
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
https://www.androidfilehost.com/?w=files&flid=268775
Thanks for lohanbarth for the instructions.
Enjoy.
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
Valeu cara!
Primeira Rom RetBR que eu vejo, quero ver se com ela da pra fazer um boot.img do magisk.
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
Is this the A1 version?
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
Most likely not since there were no A1 in Brazil and it says XT1900-06 which is the BR Variant.
Also, in the file name, there's no AMZ nor FI, so it only lasts Retail.
I could be wrong thou.
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
No, it's the retail ROM, but the Brazilian rom received only the April patch, not 8.1.
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
Retail
Anyone tried on indian version ?
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
https://www.androidfilehost.com/?w=files&flid=268775
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
can you share screenshot of about phone
mujju85 said:
can you share screenshot of about phone
Click to expand...
Click to collapse
What for? The ROM is original. There is nothing different to see
leogeeko said:
What for? The ROM is original. There is nothing different to see
Click to expand...
Click to collapse
After installing this my phone got boot looped and I had to flash older version and also wiped off data to get back my phone working
mujju85 said:
After installing this my phone got boot looped and I had to flash older version and also wiped off data to get back my phone working
Click to expand...
Click to collapse
Make sure that the script you used to flash have all the files listed for flashing that are contained in the zip drive.
Mine just worked flawlessly. I don't know if there is any difference between the Brazilian Retail Phone to the Indian one.
leogeeko said:
Make sure that the script you used to flash have all the files listed for flashing that are contained in the zip drive.
Mine just worked flawlessly. I don't know if there is any difference between the Brazilian Retail Phone to the Indian one.
Click to expand...
Click to collapse
yes i have tried couple of times still cant manage to run this rom
mujju85 said:
yes i have tried couple of times still cant manage to run this rom
Click to expand...
Click to collapse
Really wierd. Definitely you should check your phone or the script you're running. I will upload the one I used when I get home
mujju85 said:
yes i have tried couple of times still cant manage to run this rom
Click to expand...
Click to collapse
Hey Mujju,
I´ve downloaded both files and reflashed my phone twice and everything ran smoothly.
I uploaded the code from that script I´ve used. It is different from the Lohanbarth post. Give it a try with my script and see how it goes.
If it does not work, we may have found the first "incompatibility" between X4 models.
Ok I will try and let you know thanks for the the new script
Finally it's works now I am on April security patch thanks again
Screenshot
mujju85 said:
Finally it's works now I am on April security patch thanks again
Click to expand...
Click to collapse
:good::good::good::good::good:
mujju85 said:
Anyone tried on indian version ?
Click to expand...
Click to collapse
Few days ago I went to the service centre..After that don't know how I got April 2018 security patch..
All the Indian version is still on December 2017...
Also built number changed to OPWS27.2.2 Motorola Version is OPWS27.57-40-14
SouravSatvaya said:
Few days ago I went to the service centre..After that don't know how I got April 2018 security patch..
All the Indian version is still on December 2017...
Also built number changed to OPWS27.2.2 Motorola Version is OPWS27.57-40-14
Click to expand...
Click to collapse
How did you got this version ?