I want to unroot my phone without losing data. Is this possible? - AT&T HTC One (M8)

Also, since it was previously rooted, can I immediately get to installing the OTA updates/most recent At&t updates for my device? Will they even be there? If not, can anyone leave me a link and explain how to do so after I finish the unrooting process? Thank you.
Also, I just found the rom page on HTC, and I think this is correct. I'm still on 4.4.2 anyways That, or 4.2.2 Not quite sure. Is it possible for me to just download this from the website? If that's the case, then I won't unroot it. My only gripe is that I can't uninstall anything on my phone even though it's rooted. When I restart, the app still remains. This is only with stock apps, of course. Anyways, with the HTC rom, if I have to flash this or something, etc., I'd need this to be explained.
Edit: I did find a youtube video in which I can get OTA updates on my phone, but it says that I need to have a twrp custom recovery. All I really did was root my phone and I have the super su app.

You need to relock the boot loader and then select unroot in super su options. You will also need to flash stock recovery if you want to receive OTAs.
This shouldn't delete any data.
I would recommend going s-off and flashing dev edition Rom. Quicker updates and no bloatware to deal with. Worked great for me.
Before doing so, just copy your contacts and messages to ext SD card. Reinstalling your apps isn't too much of an inconvenience considering you get out from under AT&T restrictions.
Sent from my HTC One_M8 in a van down by the river.

chevyjohn01 said:
You need to relock the boot loader and then select unroot in super su options. You will also need to flash stock recovery if you want to receive OTAs.
Click to expand...
Click to collapse
Relocking the bootloader typically wipes data and renders the phone unbootable (expect the RUU).
Also, it seems like you are suggesting the method or return to stock for OTAs. In that case, relocking the bootloader is not necessary. Relocking the bootloader is only required to RUU (not for OTA).
---------- Post added at 02:56 PM ---------- Previous post was at 02:50 PM ----------
Tiffianie said:
Also, since it was previously rooted, can I immediately get to installing the OTA updates/most recent At&t updates for my device? Will they even be there? If not, can anyone leave me a link and explain how to do so after I finish the unrooting process? Thank you.
Click to expand...
Click to collapse
For OTA, you need stock ROM (nothing modified in system partition - but from your subsequent statement it sounds like you were never able to, anyway) and stock recovery.
From there, and also as long as you are on AT&T's network, you should be able to get OTA updates. Root is okay (does not prevent OTA updates in itself). Unlocked bootloader is also ok.
You should be able to return to stock and OTA update without losing your data. However, you should always be backing up your data (and be able to restore it accordingly), if its that important to you. Your data is never guaranteed to be safe, even with normal day to day usage (much less OTA updates or rooting) and you should backup to avoid regret.
Tiffianie said:
My only gripe is that I can't uninstall anything on my phone even though it's rooted. When I restart, the app still remains. This is only with stock apps, of course. Anyways, with the HTC rom, if I have to flash this or something, etc., I'd need this to be explained.
Click to expand...
Click to collapse
Could have easily searched these forums for that answer. System partition (where the stock apps are stored) on this phone is write protected. Even with root, you need to install a kernel mod to disable write protection.
Tiffianie said:
Edit: I did find a youtube video in which I can get OTA updates on my phone, but it says that I need to have a twrp custom recovery. All I really did was root my phone and I have the super su app.
Click to expand...
Click to collapse
If you didn't install custom recovery, how did you root?

chevyjohn01 said:
You will also need to flash stock recovery if you want to receive OTAs.
This shouldn't delete any data.
I would recommend going s-off and flashing dev edition Rom. Quicker updates and no bloatware to deal with.
Click to expand...
Click to collapse
I probably won't unroot if I can try to get ota updates. How can I check what recovery I have installed? I downloaded flashify and backed up the current kernel through my drop box, so I'm not sure if that did a damned thing.

Related

[Q] How to update Original Rooted 4.0.3 Incredible 4g

I have an Incredible 4g on Verizon that I acquired during the first week of release. I was fortunate enough to get it unlocked during the time when HTC allowed it from their site. I unlocked the phone, installed TWRP, and rooted my device (I'm not entirely sure how I did this).
It's been over a year now, and my phone is kind of sluggish. How can I go about updating this phone to the latest software? I'd settle for the latest OTA from Verizon, as long as I can keep it rooted.
I'm also willing to flash one of the other kernels, but I dont really have any experience flashing CM or Viper.
So what's the best way to go about doing this? How do you update an already rooted phone? Ideally I'd like to keep all apps/data during the update. Any information or links for how to update appreciated!
My phones details:
Android 4.0.3
HTC Sense 4.0
Software: 1.43.605.3.710RD
HTC SDK API: 4.11
it probably won't even install unless you return to stock recovery.
another poster already confirmed losing root after installing the update.
imo - the update is not worth it anyway. they other thread lists the changes... nothing significant.
if your phone is sluggish either find out what is causing it (app, etc), tweak performance using your root, or wipe it and start clean. i would not give up an unlocked, rooted device for this update.
j13smiley said:
it probably won't even install unless you return to stock recovery.
another poster already confirmed losing root after installing the update.
imo - the update is not worth it anyway. they other thread lists the changes... nothing significant.
if your phone is sluggish either find out what is causing it (app, etc), tweak performance using your root, or wipe it and start clean. i would not give up an unlocked, rooted device for this update.
Click to expand...
Click to collapse
Is this just for stock updates, or for Viper/VM mods as well? I'm willing to step up to 4.3 or 4.4 with one of these custom ROMs, assuming I can keep root.
Is this a complicated process to install one of these custom ROMs (anything special since my phone is so "old")?
Will I have to wipe and install from scratch as well?
You can always clear your cache and davek cache to help improve speeds.
zackiv31 said:
Is this just for stock updates, or for Viper/VM mods as well? I'm willing to step up to 4.3 or 4.4 with one of these custom ROMs, assuming I can keep root.
Is this a complicated process to install one of these custom ROMs (anything special since my phone is so "old")?
Will I have to wipe and install from scratch as well?
Click to expand...
Click to collapse
Installing a fresh/new ROM is very easy, and it will indeed require reinstalling apps. However, Look at getting Titanium Backup Root - I highly recommend the Pro version - you can back up all of your apps and data. Once performing a full TiB backup to your external SD card, you can wipe and install a fresh ROM, then restore any/all apps and data backed up with TiB. The app will pick up right where you backed it up, settings and all. You may need to re-set up a few apps (such as email settings).
If you like sense, I recommend ViperLTE. It's very close to stock Sense, but offers several great tweaks you can choose to use (or not). Installing it is easy if you have TWRP recovery installed. If you don't have TRWP installed, look at mdmower's thread for that recovery. I also highly recommend performing a full Nandroid backup to your external SD card before doing anything.
j13smiley said:
it probably won't even install unless you return to stock recovery.
another poster already confirmed losing root after installing the update.
imo - the update is not worth it anyway. they other thread lists the changes... nothing significant.
if your phone is sluggish either find out what is causing it (app, etc), tweak performance using your root, or wipe it and start clean. i would not give up an unlocked, rooted device for this update.
Click to expand...
Click to collapse
Very true... I, too, lost root after OTA update. I've tried every method I could find to attempt to unlock bootloader now with update... even tried wipe and flash of stock RUU 2.17.605.2: unable to go back to older version due to updated bootloader (wouldn't let me load it).
It'd be nice if HTCdev simply updated for a .bin that'll work... I tried flashing unlock_code.bin from previous experiences... but wouldn't work either. Any rumors of a new method to unlock the new bootloader?

Need help unrooting M8

So I have read multiple articles on how to unroot and have tried 2 of them with no avail. Can anyone explain to me or point me in the right direction on to a "How to unroot for dummies" or something!? I tried getting a nandroid backup and putting in in TWRP/backups/ but for some reason when I boot into recovery and select "Internal Storage" it doesnt show anything! Then I tried to flash the stock recovery from the toolkit and I get an error. Any help would be appreciated.
CavyS said:
So I have read multiple articles on how to unroot and have tried 2 of them with no avail. Can anyone explain to me or point me in the right direction on to a "How to unroot for dummies" or something!? I tried getting a nandroid backup and putting in in TWRP/backups/ but for some reason when I boot into recovery and select "Internal Storage" it doesnt show anything! Then I tried to flash the stock recovery from the toolkit and I get an error. Any help would be appreciated.
Click to expand...
Click to collapse
There is a step by step guide to do this under the General section of this forum.
Here is a link...
http://forum.xda-developers.com/showthread.php?t=2751011
I would ask why you want to unroot? Unless you are selling/trading the device, its my opinion that once you are rooted, there are few other valid reasons to go back.
scott500 said:
There is a step by step guide to do this under the General section of this forum.
Here is a link...
http://forum.xda-developers.com/showthread.php?t=2751011
Click to expand...
Click to collapse
Yeah that might as well have been written in Arabic. I think that might be one of the methods I tried though?.. Except when I put the Nandroid backup in TWRP/backups then rebooted my phone into recovery the backup wasnt showing in there no matter what I did, and the other way just got an error.
redpoint73 said:
I would ask why you want to unroot? Unless you are selling/trading the device, its my opinion that once you are rooted, there are few other valid reasons to go back.
Click to expand...
Click to collapse
I want to unroot to get the OTA update. And I'm sure I could probably flash the new update or whatever, but I would rather just get the OTA. Just my OCD I guess?..
CavyS said:
I want to unroot to get the OTA update. And I'm sure I could probably flash the new update or whatever, but I would rather just get the OTA. Just my OCD I guess?..
Click to expand...
Click to collapse
I can never ever understand folks that root, than want OTA. As you suggested, the ROM is already available (stock rooted) in a custom recovery-flashable form, supplied graciously just days after the OTA started rolling out. And if you are referring to an upcoming OTA, the same will probably be true; or it will be available earlier for the international version (and isn't that one of the reasons we root?).
If you want the firmware package that came with the OTA, that is available to flash on modded phones, as well.
redpoint73 said:
I can never ever understand folks that root, than want OTA. As you suggested, the ROM is already available (stock rooted) in a custom recovery-flashable form, supplied graciously just days after the OTA started rolling out. And if you are referring to an upcoming OTA, the same will probably be true; or it will be available earlier for the international version (and isn't that one of the reasons we root?).
If you want the firmware package that came with the OTA, that is available to flash on modded phones, as well.
Click to expand...
Click to collapse
Lol I know, idk why I have to have to OTA either. Its just an OCD thing. I think its because I know that what I'm getting from OTA is clean and is a 100% working squeaky clean release by Android. Opposed to a ROM that someones put together themselves. I'm sure there is nothing wrong with the ROM or that there is any kind of malware or viruses in it. But its just an OCD thing were I would never stop thinking about it. And first thing my phone crashes or runs into a bug regardless of the problem I would blame it on the ROM. Lol now I sound like a sociopath
CavyS said:
now I sound like a sociopath
Click to expand...
Click to collapse
Haha, not really.
If a clean, bugfree OS is what you crave, than I would actually strongly disagree with the notion that an OTA is the way to do that. OTA is often a mess, as it only updates some things, and not other (not a complete image) and also keeps user data; which if you will see from any forum thread (here or other places) about bugs after OTAs, keeping user data is often the cause of many issues.
Factory reset plus OTA is one way around this. But if you really are OCD about a "clean" stock install, I would run the RUU. Either get S-off, or relock bootloader beforehand; and backup user data as this will be wiped. RUU is a complete factory released image.
redpoint73 said:
Haha, not really.
If a clean, bugfree OS is what you crave, than I would actually strongly disagree with the notion that an OTA is the way to do that. OTA is often a mess, as it only updates some things, and not other (not a complete image) and also keeps user data; which if you will see from any forum thread (here or other places) about bugs after OTAs, keeping user data is often the cause of many issues.
Factory reset plus OTA is one way around this. But if you really are OCD about a "clean" stock install, I would run the RUU. Either get S-off, or relock bootloader beforehand; and backup user data as this will be wiped. RUU is a complete factory released image.
Click to expand...
Click to collapse
Quick question. I put the Nandroid backup in the TWRP/backups/ folder. It doesnt show up in "Restore" but it shows up in "Install" in TWRP Recovery. When I click on it in "Install" it asks me "Swipe to Confirm Flash" Is it okay to flash Nandroid backup from the "Install" location or does it have to be done through "Restore"?
redpoint73 said:
I would ask why you want to unroot? Unless you are selling/trading the device, its my opinion that once you are rooted, there are few other valid reasons to go back.
Click to expand...
Click to collapse
I unrooted ?. Main reason for me was to use ISIS and be able to play a game me and some buddies play. I had root and ISIS didn't like it, so grabbed rootcloak but game disliked xposed
Sent from my HTC One_M8 using Tapatalk
twiggums said:
I unrooted ?. Main reason for me was to use ISIS and be able to play a game me and some buddies play. I had root and ISIS didn't like it, so grabbed rootcloak but game disliked xposed
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Yeah I just updated with RUU, I'll re-root again once 4.4.4 gets pushed out.

[Q] Removing Root to do OTA Lolipop?

As per the title, I read something somewhere to the effect that from here on out, OTA updates will fail on most phones if they have been rooted, and this seems to be true for the Z Ultra GPE. So, what changed when I rooted my phone, and how do I undo it so that I can do the OTA update? I have looked through the forum, but nobody seems to answer it. I am rooted with Supersu using the Towelroot method. I am hoping to not have to unlock the bootloader or anything, just want to do this the official way. (I did backup my TA partition though).
jeraldjunkmail said:
As per the title, I read something somewhere to the effect that from here on out, OTA updates will fail on most phones if they have been rooted, and this seems to be true for the Z Ultra GPE. So, what changed when I rooted my phone, and how do I undo it so that I can do the OTA update? I have looked through the forum, but nobody seems to answer it. I am rooted with Supersu using the Towelroot method. I am hoping to not have to unlock the bootloader or anything, just want to do this the official way. (I did backup my TA partition though).
Click to expand...
Click to collapse
If your GPe is rooted only, the OTA should install just fine. If you made any system changes, you'll need to revert those though. I ran the OTA while I was rooted and didn't have any problems.
Visa Declined said:
If your GPe is rooted only, the OTA should install just fine. If you made any system changes, you'll need to revert those though. I ran the OTA while I was rooted and didn't have any problems.
Click to expand...
Click to collapse
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
jeraldjunkmail said:
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
Click to expand...
Click to collapse
well at the moment that doesn't effect the GPe, and may never. There will have to be a system image flashed to put the block device in a known state before the new way could ever be used, and if there is a system.img we can always flash that to get the OTA to work... no big deal I don't think.
jeraldjunkmail said:
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
Click to expand...
Click to collapse
First of all, BGR is a garbage site, and I wouldn't believe anything they say, ever. Second, that article is talking about avoiding root AFTER Lollipop is installed.
Having root will not cause the OTA to fail. If your OTA is failing, it's because you made a system change on your device.
*edit
If you were using Xposed, then that is more than likely why your OTA is failing.
What is Xposed? How would I check to see if it has affected my device? Only thing I did was Towelroot and running SuperSU. I may have done something to allow writing to the external SD card, but forget how I did that. I was intentionally trying to keep this phone basically stock so that it would easily update to Lolipop. I did a Titanium backup to the externalSD card and reset it to factory and the OTA update still fails though. I assume this was due to the fact that I rooted it. The bootloader is still unmodified, secureboot is still green - yes, lock state is locked. Only other thing I can think of is I installed an app that allowed me to set permissions by app (turn off location settings by app, etc) Sorry I can't give any more details than that...
jeraldjunkmail said:
I may have done something to allow writing to the external SD card, but forget how I did that.
Click to expand...
Click to collapse
jeraldjunkmail said:
Only other thing I can think of is I installed an app that allowed me to set permissions by app (turn off location settings by app, etc) Sorry I can't give any more details than that...
Click to expand...
Click to collapse
If you can't figure out what system change you made to your phone, just factory reset it, and run the OTA again. There was multiple people(me included) that took the OTA successfully, our phones were rooted and SuperSU was installed.
Visa Declined said:
If you can't figure out what system change you made to your phone, just factory reset it, and run the OTA again. There was multiple people(me included) that took the OTA successfully, our phones were rooted and SuperSU was installed.
Click to expand...
Click to collapse
As mentioned before, I factory reset this and wiped the cache from the stock recovery mode. Update won't take, stops shortly after it fails with "system update error". Since my last reset (been done a few times) it won't prompt me to get the OTA update, after my last reset last night. Any help is appreciated. Thanks!
{Damn thing won't work... (*&^&%^$$#}
jeraldjunkmail said:
As mentioned before, I factory reset this and wiped the cache from the stock recovery mode. Update won't take, stops shortly after it fails with "system update error". Since my last reset (been done a few times) it won't prompt me to get the OTA update, after my last reset last night. Any help is appreciated. Thanks!
{Damn thing won't work... (*&^&%^$$#}
Click to expand...
Click to collapse
The only fail-safe way I can see is to:
root
back up TA
unlock BL
hotboot custom kernel with recovery
flash 4.4.2
OTA to 4.4.3
OTA to 4.4.4
root and restore TA if you want a working camera
OTA to 5.0
blueether said:
The only fail-safe way I can see is to:
root
back up TA
unlock BL
hotboot custom kernel with recovery
flash 4.4.2
OTA to 4.4.3
OTA to 4.4.4
root and restore TA if you want a working camera
OTA to 5.0
Click to expand...
Click to collapse
As often happens, I sometimes see a solution I don't care to implement and begin to procrastinate. So, haven't looked at this problem for a while. I may have found the solution to my problems, but want to know if anyone has experience with it before proceeding. I re-installed superSU and went through the options. Buried in the options list is a box that offers "Full unroot, Cleanup for permanent unroot". What happens when I do this? does it just remove superSU or does it restore the phone back to factory status, before it was rooted? Thanks!
PS: @ blueether the solution is fine and I am sure it would work (I was going to go ahead with it until I saw that option in superSU), but have been hesitant to unlock the bootloader, etc, due to my unfamiliarity with hacking Sony products, and only want to do it as a last, final, no other option solution. Thanks for your help!
jeraldjunkmail said:
As often happens, I sometimes see a solution I don't care to implement and begin to procrastinate. So, haven't looked at this problem for a while. I may have found the solution to my problems, but want to know if anyone has experience with it before proceeding. I re-installed superSU and went through the options. Buried in the options list is a box that offers "Full unroot, Cleanup for permanent unroot". What happens when I do this? does it just remove superSU or does it restore the phone back to factory status, before it was rooted? Thanks!
PS: @ blueether the solution is fine and I am sure it would work (I was going to go ahead with it until I saw that option in superSU), but have been hesitant to unlock the bootloader, etc, due to my unfamiliarity with hacking Sony products, and only want to do it as a last, final, no other option solution. Thanks for your help!
Click to expand...
Click to collapse
That's fine and I take no offence at you not wanting to unlock the BL.
I haven't tried the full unroot option in supersu so I'm not sure what the outcome is. One of the other GPe users care to comment?
Well, turns out that the solution to unrooting the phone is to install superSU and than look inthe settings. It will offer you an option to completely uninstall root. It did what it says, and than you can check it with a check root app from the market. It reports that the phone is not rooted. Now the question is, will it pick up the OTA update... No luck with that after a clean factory reset, so not sure what to do next.
2 questions: If I unrooted my phone, and it says it is unrooted, is this true, in the fullest extent? Does towelroot do anything more than adding some permissions ans the superuser file?
If the phone won't pick up the OTA update, why? What went wrong?
Thanks!
jeraldjunkmail said:
Well, turns out that the solution to unrooting the phone is to install superSU and than look inthe settings. It will offer you an option to completely uninstall root. It did what it says, and than you can check it with a check root app from the market. It reports that the phone is not rooted. Now the question is, will it pick up the OTA update... No luck with that after a clean factory reset, so not sure what to do next.
2 questions: If I unrooted my phone, and it says it is unrooted, is this true, in the fullest extent? Does towelroot do anything more than adding some permissions ans the superuser file?
If the phone won't pick up the OTA update, why? What went wrong?
Thanks!
Click to expand...
Click to collapse
It sounds like the OTA is not being pushed at the moment/anymore. You could copy it to there the recovery can see it and manually install it
blueether said:
It sounds like the OTA is not being pushed at the moment/anymore. You could copy it to there the recovery can see it and manually install it
Click to expand...
Click to collapse
Can you point me inthe right direction for instructions on this process? Thanks!
Visa Declined said:
First of all, BGR is a garbage site, and I wouldn't believe anything they say, ever. Second, that article is talking about avoiding root AFTER Lollipop is installed.
Having root will not cause the OTA to fail. If your OTA is failing, it's because you made a system change on your device.
*edit
If you were using Xposed, then that is more than likely why your OTA is failing.
Click to expand...
Click to collapse
Your post is two years ago but i think you can help me,there is a new update for my phone and i am rooted i also have xposed installed so this mean i cannot update my sytem? Do i need to uninstall xposed? Im on stock rom and with TWRP recovery it would be a big help if you reply thanks.

[Q] NC5 root, updates and backup questions

I am giving two VZW GS4's to my parents for Christmas and I would like to make things as simple as possible for them, which means getting rid of all the boatware that Verizon/Samsung includes. I'm familiar with rooting/flashing etc. with my Sprint GS4, but I am still somewhat bewildered by all the info regarding the VZW phones and all the different versions.
These VZW phones are on the NC5 baseband (?) and if I understand correctly they can be rooted with towelroot but cannot install a custom recovery because the bootloader is locked.
Once I root, will the phone still receive OTA updates and install properly, or will there just be a continual message saying that the update failed?
I don't plan on trying to install a custom ROM, but if I understand correctly the only way to do so is by using safestrap?
Is it possible to backup the phone, similar to a ROM backup in TWRP for example? Will I be able to return to a full stock state after root? In other words, after I root what happens if I do a factory data reset?
Thanks in advance.
buckeyestargazer said:
I am giving two VZW GS4's to my parents for Christmas and I would like to make things as simple as possible for them, which means getting rid of all the boatware that Verizon/Samsung includes. I'm familiar with rooting/flashing etc. with my Sprint GS4, but I am still somewhat bewildered by all the info regarding the VZW phones and all the different versions.
These VZW phones are on the NC5 baseband (?) and if I understand correctly they can be rooted with towelroot but cannot install a custom recovery because the bootloader is locked.
Once I root, will the phone still receive OTA updates and install properly, or will there just be a continual message saying that the update failed?
I don't plan on trying to install a custom ROM, but if I understand correctly the only way to do so is by using safestrap?
Is it possible to backup the phone, similar to a ROM backup in TWRP for example? Will I be able to return to a full stock state after root? In other words, after I root what happens if I do a factory data reset?
Thanks in advance.
Click to expand...
Click to collapse
1. You are correct. The nc5 can only be rooted. The bootloader is not unlocked or even possible to workaround; safestrap is your only option.
2. Once you root, your phone will not be stock anymore so OTAs will not work. You must unroot and restore your phone back to stock in order to update via OTA. However, if you learn how to use ODIN, your life will become much easier.
3. Safestrap is the only way.
4. You can backup with Safestrap. Yes you will be able to return back to a full stock state using ODIN. If you use ODIN to factory reset, your phone becomes back to stock i.e. unrooted.
Raymondlikesroot said:
2. Once you root, your phone will not be stock anymore so OTAs will not work. You must unroot and restore your phone back to stock in order to update via OTA. However, if you learn how to use ODIN, your life will become much easier.
Click to expand...
Click to collapse
Thanks. One more question: Once rooted, if I stay on the stock rom, will the phone still receive OTA update notifications (even though it will fail install)?
I'm a little familiar with odin so I should be able to go back to full stock if necessary.
buckeyestargazer said:
Thanks. One more question: Once rooted, if I stay on the stock rom, will the phone still receive OTA update notifications (even though it will fail install)?
I'm a little familiar with odin so I should be able to go back to full stock if necessary.
Click to expand...
Click to collapse
Yes, unfortunately, you will receive constant update messages. However, if you are rooted, you can stop these messages. Download an app called "titanium Backup" and freeze fwupdate.apk. That specific app is what causes all the update messages to appear.

Well AT&T fnally pushed out the 4.4.4 update

If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.

Categories

Resources