If my Droid Incredible 4G LTE is connected to Wifi, it disconnects from Cellular Data. When I leave where ever it is connected to WifI, it won't connect back to cellular data. I have to turn off Wifi, then reboot the phone. I haven't tried something like switching to Airplane mode, I will try that. Has anybody else seen this issue? The phone is on Straight Talk Veriozon network, so is using SIM card for 4G LTE and CDMA for voice.
Are you stock?
No. Probably would help to mention that. S-OFF, partitions swapped and rooted CM 1.2.1 FWIW, this was happening with CM 11.2 before the partition swap. It wasn't happening before I did S-OFF and flashed CM 11.2 but I was also living in a different location for several months. It didn't start until I moved to where I am now.
I would try to do a clean reflash and see what happens.
I will think about that but I did a clean install when I did the partition swap and flashed the new ROM. I'd rather not do that again and have to set the phone back up again.
Today it seems to be better, I moved from Wifi to out and about and it switched to LTE properly.
therreid said:
I would try to do a clean reflash and see what happens.
Click to expand...
Click to collapse
I may have to try the reflash after all. The problem's gotten worse and now as of yesterday and today a reboot of the phone isn't getting me cellular data back. This did not start until we moved to a temporary place where I get voice service but not data at home. So the phone spends a lot of time on Wifi and not in a place where it can get data. So I'm wondering if the Verizon network is somehow forgetting about the phone or somesuch. At my old house, it was connected to Wifi but the data network was always available. The phone is S-Off with a custom bootloader and recovery. Assuming I wanted to try, can I put the stock ROM back on it without undoing all that?
crokett said:
I may have to try the reflash after all. The problem's gotten worse and now as of yesterday and today a reboot of the phone isn't getting me cellular data back. This did not start until we moved to a temporary place where I get voice service but not data at home. So the phone spends a lot of time on Wifi and not in a place where it can get data. So I'm wondering if the Verizon network is somehow forgetting about the phone or somesuch. At my old house, it was connected to Wifi but the data network was always available. The phone is S-Off with a custom bootloader and recovery. Assuming I wanted to try, can I put the stock ROM back on it without undoing all that?
Click to expand...
Click to collapse
If you want to go to stock, you will have to reverse the partition swap.
therreid said:
If you want to go to stock, you will have to reverse the partition swap.
Click to expand...
Click to collapse
That part I understand. What I should have asked was "if I want to go back to the stock ROM, do I need to undo the custom recovery, relock the bootloader, go S-ON, etc? Any other ROMS besides CM I might try? That could tell me if it is the ROM or not but, again I did not have this issue until I moved to an area where I can get voice, but no data.
You should be able to remain s-off. here are the stock packages if you don't have them, http://android.cmphys.com/stock-fireball/
crokett said:
That part I understand. What I should have asked was "if I want to go back to the stock ROM, do I need to undo the custom recovery, relock the bootloader, go S-ON, etc? Any other ROMS besides CM I might try? That could tell me if it is the ROM or not but, again I did not have this issue until I moved to an area where I can get voice, but no data.
Click to expand...
Click to collapse
Thanks. I will grab a stock ROM. I really like CM 12.1 (and the swapped partitions) though. I was able to get the phone back to cellular data this morning while I was on a chat with Straight Talk. Why a reboot worked then but not the 3 other times I have no idea. I'm also wondering what happens the next time this happens if I go into APN settings and change it to one that doesn't work, then change it back.
Over looking at the stock ROM downloads I see a link to this patch:
http://review.cyanogenmod.org/#/c/93484/
The ROM I am running now was built on 05/26. I see a newer CM 12.1 ROM dated 06/12 that contains that patch so I will flash that ROM, probably next week. I'm on call this weekend and don't want to risk bricking the phone.
I'm running the 6/12 build and it seems happy. I only run my Fireball on WIFI since I switched to AT&T and have a Nexus 5 for my primary.
crokett said:
Over looking at the stock ROM downloads I see a link to this patch:
http://review.cyanogenmod.org/#/c/93484/
The ROM I am running now was built on 05/26. I see a newer CM 12.1 ROM dated 06/12 that contains that patch so I will flash that ROM, probably next week. I'm on call this weekend and don't want to risk bricking the phone.
Click to expand...
Click to collapse
wmuflyer said:
I'm running the 6/12 build and it seems happy. I only run my Fireball on WIFI since I switched to AT&T and have a Nexus 5 for my primary.
Click to expand...
Click to collapse
Ive thought about getting a new phone on a GSM network but where we are building our house I can't get a ATT signal there, so I'm stuck with Verizon.
Related
*Used the search tool first - no joy*
Running CM10 Stable - current config:
UNLOCKED (HTD Dev)
S-ON
HBOOT-1.19.000
RADIO-1.12.11.0809
Since flashing CM10 this weekend, my mobile data has gone in the toilet. Network/"no connection" errors and gray bars way more often, despite not changing a thing about my radios. Weirdly, if I turn on wifi, it seems to improve my reception as well (as in, I'm not on a wifi network - just the act of switching on wifi somehow gooses network performance, but only a little.) I haven't done better than two blue bars since I did this, and I've only seen "4G" once. I used to get far better than that.
Checked Settings, everything seems fine. Thoughts? More data needed?
Try flashing back to sense and reprovision the phone
##786# menu/reset
Password is msl
om4 said:
Try flashing back to sense and reprovision the phone
##786# menu/reset
Password is msl
Click to expand...
Click to collapse
Thanks - do I need to re-lock as part of this, or simply flash Sense, re-provision, re-flash CM? Just want to keep this painless.
You don't relock
(n00bish question alert) Is there a way to re-flash Sense from a .zip with TWRP? Trying an ICS RUU executable linked elsewhere in this forum and I keep getting "Error 155". Will anything Sense-like work, or does it have to be stock?
Any sense-based rom will work...and you're exactly right: grab the zip and flash through twrp. Make sure to do a nandroid of your current rom first so you can restore after you're done.
Sent from my EVO LTE
Took me a while to find a ROM with a kernel installer (my sticking point) - MeanBean plus the reset did it. Thanks, gents.
takeout said:
Took me a while to find a ROM with a kernel installer (my sticking point) - MeanBean plus the reset did it. Thanks, gents.
Click to expand...
Click to collapse
Are you back on CM10 again withOUT network issues now? I loved CM10 but had the same issue and jumped on another ROM. Might wanna go back.
Hey guys! So I moonshined and got S-OFF on my phone. I first backed up my factory ROM after I wiped all the data so I would have it to go back to in the future if needed, this was done through clockwork mod. So I first tried using the NOS M7 ROM, didn't like that as the home screen seemed too Window's 8 phone like to me. I then tried the CyanogenMod 10.1, I noticed that my phone was only getting 3G data at this point. I was using my wife's new Galaxy S4 that was getting 4G as a comparison to mine. We were traveling through town so it's not a tower based issue, as her phone showed 4G.
I then tried to switch to viperDNA1.3.1 and I had all sort of issues with it. Heck this morning it would not even show me my alarm notification when it was going off to shut the phone up. I had to power it off to silence it. It even stopped showing the notification bar on the top of the screen and I couldn't even do the drag down thing to see notifications and settings.
So today at work I downloaded RageDNA to see if an optimized stock app would work for me, no change..... I even formatted my sdcard to blank it and the did an adb push to transfer the ROM.zip back to my phone.
SO.... between each app I would launch into ClockWorkMod and 1. wipe dalvik cache. 2. format system. 3. wipe data/factory reset. 4. choose the zip from the sdcard (haha like we really have a true sdcard) and wait for the install and then launch into the phone and do the basic setup to get the ROM working.
HELP!!!! (me crying) I am afraid I did something to my phone during the flashing that jacked up the radio causing 4G to be broken. Is there something else you need to know from me to help me out, please let me know!
**********UPDATE**********
I double checked all my phones settings with a coworker who also has a DNA, but still S-ON. Everything is setup the same for settings on the APN's. I even recreated a duplicate APN that used the specified "LTE" network instead of the one that was defaulted on both of ours "unspecified". No change, even rebooted.
I also restored my CWM backup I did before making any changes to my phone via switching ROM's. The only difference is the fact that their network typeshows "LTE" where my shows "eHRPD". I am going to look into seeing how to reflash the radio to see if something got corrupt.
If it comes down to it I am going to reset my phone back to S-ON and reflash everything that I can find that I can do.
*********Resolution*********
After reflashing my radio, I did not get any 4G signal any more, I know Verizon towers were down for 4G near my work so not sure if they moved over to the towers by my home as I only live 10 minutes from work. So only after being at work for about an hour my 4G signal started on it's own without anything done by me today.
So as I was on the path to trying to take it back to stock I followed the guide that Phaded posted for getting back to S-ON http://forum.xda-developers.com/showthread.php?t=2293919. I had a few issues with that, as it turns out my phone was not showing anything about being "LOCKED" after running his first set of commands. So I pressed forward after talking with Phaded on this situation. I had even flashed from my CWM recovery back to the stock recovery (also notice when running the RUU that it flashes the recovery.) I ran the RUU and then got the 158 error then had to flash the HBOOT. After that flash the phone showed "***Tampered*** & ***LOCKED***". I then proceeded to run the RUU and it completed at that point with no issues. Then the last few DOS commands for fastboot and back to Locked and S-On. I updated back from 1.15 up through 2.06. Also doing so that made me realize you have to step from 1.15 to 2.04 and finally 2.06. So far the 4G is still working. I will keep it stock for a few days to ensure no further 4G issues then I will be moonshining again!!
Just a guess, you may have to flash the boot image. If so the directions are in the install directions for Viper
RLGL said:
Just a guess, you may have to flash the boot image. If so the directions are in the install directions for Viper
Click to expand...
Click to collapse
I just tried to restore my CWM files from prior to any ROM changes. So far I have 3G data, but I tend to get 3G more so at my house than 4G, so not sure if anything will change.
I am wondering if the SIM card could have anything to do with this issue as well.... could a ROM have written to the card and caused it to not read the 4G data, or whatever is on there.
I also see that my phone's network seems to be "eHRPD" not sure if this had anything to do with it or not.
I double checked all my phones settings with a coworker who also has a DNA, but still S-ON. Everything is setup the same for settings on the APN's. I even recreated a duplicate APN that used the specified "LTE" network instead of the one that was defaulted on both of ours "unspecified". No change, even rebooted.
I also restored my CWM backup I did before making any changes to my phone via switching ROM's. The only difference is the fact that their network typeshows "LTE" where my shows "eHRPD". I am going to look into seeing how to reflash the radio to see if something got corrupt.
If it comes down to it I am going to reset my phone back to S-ON and reflash everything that I can find that I can do.
U need a new SIM card. 99% sure that's ur problem. They r free from any Verizon store. Give it a shot before u go thru the hassle of going back to s on and stock.
Sent from my HTC6435LVW using xda premium
if you download from the play store this app (its free) https://play.google.com/store/apps/...GwsMSwxLDEwOSwibmV0LmFuZGlyYy5sdGVvbmZvZmYiXQ.. open it and scroll down what does it say under set preferred network type? that screen has more crucial settings then the normal one. if you running viper in viper tweaks its the first option under misc. If you need help ill put up a pick when i get back. someones borrowing mine cause they stepped on their phone lol.
EDIT: also if you are running viper 1.3.1 you should download ind flash after the normal rom the ota update(the one that says 1.3.1 to 1.3.3.
reaverclan said:
if you download from the play store this app (its free) https://play.google.com/store/apps/...GwsMSwxLDEwOSwibmV0LmFuZGlyYy5sdGVvbmZvZmYiXQ.. open it and scroll down what does it say under set preferred network type? that screen has more crucial settings then the normal one. if you running viper in viper tweaks its the first option under misc. If you need help ill put up a pick when i get back. someones borrowing mine cause they stepped on their phone lol.
EDIT: also if you are running viper 1.3.1 you should download ind flash after the normal rom the ota update(the one that says 1.3.1 to 1.3.3.
Click to expand...
Click to collapse
Too funny that you pointed me to that app, I just found another one LTE Settings.
So I tried your app also and they had the exact same data listed. So here's the screen shots I took from my app I pointed to. My phone will connect to 4G only and only if I choose "LTE only" if I move it to something else either by changing it through the OS settings, or changing it through this app, it goes back to getting 3G service. So at least this tells me my phone isn't broken, just some setting is F***ed up somewhere.
I have tried Global and CDMA/LTE settings with it always showing 3G.
yup that's freaking weird lol swing by a VZW store and get a free sim card since yours seems like it might be messed up what happnes if you flash something like crpalmers kernel though? your boot image might just be all screwed up. his latest version is June 24th.
reaverclan said:
yup that's freaking weird lol swing by a VZW store and get a free sim card since yours seems like it might be messed up what happnes if you flash something like crpalmers kernel though? your boot image might just be all screwed up. his latest version is June 24th.
Click to expand...
Click to collapse
Yeah weird! I just used the DNA Toolkit v1.0.5, I flashed the 2.06 radio and after it rebooted and what not, I went outside (as I have bad service inside this house) and now 4G won't even connect. Not sure if it's the towers, as the one by work went out around noon today.
So as it's a kernal and not a ROM how do I do that, just the same install from zip file in CWM? Do I need any certain ROM for it? As right now I have the factory one that I backed up with CWM when I did S-OFF. (it was a blank fresh factory reset)
chayos00 said:
Yeah weird! I just used the DNA Toolkit v1.0.5, I flashed the 2.06 radio and after it rebooted and what not, I went outside (as I have bad service inside this house) and now 4G won't even connect. Not sure if it's the towers, as the one by work went out around noon today.
So as it's a kernal and not a ROM how do I do that, just the same install from zip file in CWM? Do I need any certain ROM for it? As right now I have the factory one that I backed up with CWM when I did S-OFF. (it was a blank fresh factory reset)
Click to expand...
Click to collapse
if your using viper it supports only 2.04 as a base for its radios i believe. like I said try flashing crpalmer's one this one http://d-h.st/hu7
OH also yeah your towers by you could be experiencing maintenance try driving to somewhere else id say at least a mile away.
reaverclan said:
if your using viper it supports only 2.04 as a base for its radios i believe. like I said try flashing crpalmer's one this one http://d-h.st/hu7
OH also yeah your towers by you could be experiencing maintenance try driving to somewhere else id say at least a mile away.
Click to expand...
Click to collapse
I flashed palmer's and no change. I just texted a coworker who lives about .25 miles away to see if he's getting 4G.
Again right now I'm on the factory ROM.
chayos00 said:
I flashed palmer's and no change. I just texted a coworker who lives about .25 miles away to see if he's getting 4G.
Again right now I'm on the factory ROM.
Click to expand...
Click to collapse
does the factory restore work like your cwm one i mean?
Click on Mobile Data in your settings, and make your 'preferred' network LTE/CDMA.
I had the very same error with the stock phone, and once I switched it - I started getting 4G almost everywhere.
Amer28 said:
Click on Mobile Data in your settings, and make your 'preferred' network LTE/CDMA.
Click to expand...
Click to collapse
That doesn't work, I have tried that like 30 times with no change.
reaverclan said:
does the factory restore work like your cwm one i mean?
Click to expand...
Click to collapse
I'll try the factory restore in the ROM and see what it does. (haven't setup the rom due to the lack of 4g)
chayos00 said:
I'll try the factory restore in the ROM and see what it does. (haven't setup the rom due to the lack of 4g)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17145857&postcount=2 found this and it seems like your towers might be experiencing something if they dropped from pure lte to this. like some equipment has failed and it has dropped to a lower communication lvl hardware wise. EDIT: when i meant factory i meant in cwm going to restore and restoring your whole backup(snapshot) of the factory rom that you made not in the rom itself.
chayos00 said:
That doesn't work, I have tried that like 30 times with no change.
Click to expand...
Click to collapse
I don't think you would notice the change instantly. You will see in a few hours, especially if you go somewhere, you will be getting 4G - or if you restart the phone.
Further, what you can do is flash the radio.
Here's the file you need to flash: https://docs.google.com/file/d/0B9yd_oFytDSzUjRpLTZhSFEwWnc/edit
That is a Verizon radio, and it works also with other providers.
Use fastboot to flash:
Code:
fastboot flash radio radio.img
Original thread of the radio: http://forum.xda-developers.com/showthread.php?t=2236633
PS: This is the original verizon radio.
reaverclan said:
http://forum.xda-developers.com/showpost.php?p=17145857&postcount=2 found this and it seems like your towers might be experiencing something if they dropped from pure lte to this. like some equipment has failed and it has dropped to a lower communication lvl hardware wise. EDIT: when i meant factory i meant in cwm going to restore and restoring your whole backup(snapshot) of the factory rom that you made not in the rom itself.
Click to expand...
Click to collapse
When I was at work, I compared a coworkers DNA and he was getting actual LTE signal. So don't think it's that with the eHRDP thing that I keep seeing. But yeah it looks like a "cheaters way" to get their CDMA hardware to work with LTE. lol
Sorry, I feel like a tard and not really following what you are talking about with the "factory" thing. If you mean in the hboot the factory restore, it takes you to the CWM recovery to do that factory restore. Plus the ROM restore seems to almost go through CWM as well, but does it automatically. I'm going to do a full wipe and set this thing back to factory settings. As when it's broke and not working, best thing to do is start fresh.
chayos00 said:
When I was at work, I compared a coworkers DNA and he was getting actual LTE signal. So don't think it's that with the eHRDP thing that I keep seeing. But yeah it looks like a "cheaters way" to get their CDMA hardware to work with LTE. lol
Sorry, I feel like a tard and not really following what you are talking about with the "factory" thing. If you mean in the hboot the factory restore, it takes you to the CWM recovery to do that factory restore. Plus the ROM restore seems to almost go through CWM as well, but does it automatically. I'm going to do a full wipe and set this thing back to factory settings. As when it's broke and not working, best thing to do is start fresh.
Click to expand...
Click to collapse
okay if you do it from hboot it wont do anything cause now cwm will stop that from running but that is the same as running factory reset in cwm, thats not what im talking about though when you first moonshined then booted cwm after getting it, did you run a backup of your factory(stock) ROM? if so it would be in sdcard/clockworkmod/backups it also would have been about 1.5-2GB's. you could also try the radio.img amer is taking about as well, that you need to flash with adb though in fastboot as he stated.
reaverclan said:
okay if you do it from hboot it wont do anything cause now cwm will stop that from running but that is the same as running factory reset in cwm, thats not what im talking about though when you first moonshined then booted cwm after getting it, did you run a backup of your factory(stock) ROM? if so it would be in sdcard/clockworkmod/backups it also would have been about 1.5-2GB's. you could also try the radio.img amer is taking about as well, that you need to flash with adb though in fastboot as he stated.
Click to expand...
Click to collapse
After I noticed my 4G issue, I restore my CWM backup. Yes the CWM backup is what I restored and I am running from right now. It's size is 1.39GB in size.
I will do the radio flash right now.
ive been having same issue Network not availiable and also where i normally have 4g service i know only get 3g.Ive flashed several different roms still same issue.Could this be glitch in vzw AWS system?Is there any other radios we can flash? I notice that it take a really long time to do network hand offs too. Like I am talking a few minutes to switch from 4g to 3g or 3g to 4g. Signal bars show full, but there is not data and then they go gray and then it takes a few mins and they go blue.
basically im having the same issue as post #2 in this thread.
http://forum.xda-developers.com/showthread.php?t=2332500
It also sounds similar to this thread too.
http://forum.xda-developers.com/showthread.php?t=2292982&highlight=signal+issue
Is there something that can be done to test my radios, access point apns, etc.? I am on liquidsmooth 2.8 and have this problem ever since i got the phone (i bought it and flashed cyanogenmod last week). I also notice that under access points, i dont have anything listed and when trying to add an apn, and hit save, nothing happened
Anyone have any issue similar. I found some threads but they were not any help
Try getting a new SimCard. Those can sometimes go bad when being transferred from phone to phone. They are free anyways too.
im going to try that a little later today. thanks
Got the new sim. No help
dougmod said:
Got the new sim. No help
Click to expand...
Click to collapse
Should I sent you info to go back to stock?
DarkMenace said:
Should I sent you info to go back to stock?
Click to expand...
Click to collapse
Sure. If you think that'll help I would really appreciate it. So you think go back to stock and then reflash to liquid?
dougmod said:
Sure. If you think that'll help I would really appreciate it. So you think go back to stock and then reflash to liquid?
Click to expand...
Click to collapse
Possibly. Something could have been corrupted in the process. If it still does it on stock go to Verizon and complain.
i flashed back to stock and my download speed is 800 and upload is 85. it shows I have a 4g signal and the system status shows that my signal is -102 or -98.
anyone else have any ideas?
So things ive tried:
1. new sim.
2. back to stock touchwiz through odin
3. flash stock modem through odin and stock kernel
4. doing the whole process to root and stuff manually, then installed a customer recovery manually and then flashed a new rom, still no results
are we going to call this hardware failure? or is there any other reset type thing i can do
dougmod said:
anyone else have any ideas?
So things ive tried:
1. new sim.
2. back to stock touchwiz through odin
3. flash stock modem through odin and stock kernel
4. doing the whole process to root and stuff manually, then installed a customer recovery manually and then flashed a new rom, still no results
are we going to call this hardware failure? or is there any other reset type thing i can do
Click to expand...
Click to collapse
Most likely Hardware issue since all the steps have been tried. Unless it's only in your area. Have you tried to go somewhere else on a different tower?
yes i have. my s3 does not have any issues here, so that i why im guessing its the phone
Hi guys,
I managed to accidentally grab the ATT version of LiquidSmooth and flash it. Since then, I've had strange issues with service. Here's what I've tried:
Flashing (Verizon) versions of CM, LiquidSmooth, and Hyperdrive
Flashing the original and ME7 modems with Heimdall and Odin
Wiping data, system, caches, and fixing permissions before/after every flash
Randomly toggling Mobile Network settings (but I have no idea what I'm doing there)
[*[Searching everywhere I could think of on the forums
I had 0 service on either AOSP ROM I tried. Right now, I'm running Hyperdrive and getting weird results.
Sometimes it asks be to switch to "Global Mode" and shows that I'm roaming.
If I try to call, it says it can't find a mobile network and fails.
After leaving it sitting for a while (right after a clean flash), all the texts I missed came through.
If I try to text somebody, I'm warned that the mobile network is unavailable, but the text still goes through!
4G is working on Hyperdrive. Wifi still works on everything.
com.android.phone crashes when I try change the Network mode away from Global
I'd love to hear any suggestions you guys might have for me. Not sure what I have left to try.... is there a master reset for all of this?
Thanks!
EDIT
Some more details:
About Phone > Status in CM after fresh flash:
Network: Verizon
Signal Strength: 2147483647 (2^31 - 1) dBm, 255 (2 ^ 8 - 1) asu .......WHAT
Mobile network type: CDMA - 1xRTT:7
Service state: In service
Roaming: roaming
Mobile network: Disconnected
My phone number: something completely wrong
MEID, IMEI, ICCID are all there, but don't know how to tell if they're also whacked out
The APNs list is blank and my signal jumps between zero bars and a few bars + roaming. Call and text not working.
I've also attached my PIT file (grabbed with Heimdall). Have no idea how to read it.
Do you have a nandroid backup that includes your EFS partition? If so, I would try restoring it and seeing what happens. Sounds like something got out of whack in there and is giving your phone a hard time doing it's #1 job.
This is what ultimately switched me to the S4, my GNex randomly decided one day that it wasn't going to be a phone anymore, and I didn't have an EFS backup to restore in order to try and fix it.
Two things -
1. Always, always, always, make sure the ROM you are flashing is the correct ROM.
2. Always keep an ODIN file on handy of the full system image, here is the full MDK software, this WILL wipe all of your data - http://www.sxtpdevelopers.com/showthread.php?t=237
Sent from my Nexus 7 using xda premium
woierfere must
grussinko said:
Do you have a nandroid backup that includes your EFS partition? If so, I would try restoring it and seeing what happens. Sounds like something got out of whack in there and is giving your phone a hard time doing it's #1 job.
This is what ultimately switched me to the S4, my GNex randomly decided one day that it wasn't going to be a phone anymore, and I didn't have an EFS backup to restore in order to try and fix it.
Click to expand...
Click to collapse
I don't have a backup. That will definitely be the first thing I do when I get this working again.
gaontr the
Rebel908 said:
Two things -
1. Always, always, always, make sure the ROM you are flashing is the correct ROM.
2. Always keep an ODIN file on handy of the full system image, here is the full MDK software, this WILL wipe all of your data.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
1. I know. LiquidSmooth could have done a better job of linking to the right place on their post, but it was still really dumb on my part.
2. Thanks for this! It looks like I'll be able to try this out tonight (slow connection). The SD card data is safe right? Also, I'm just downloading the tar - not sure what the exe is for.
I haven't used Odin for this since it was on version 1.8 or something (now it's over 3)... it looks like I still just choose the tar from the PDA block and hit go... no specific other settings needed for this phone / flash, right?
No luck :/ . I unzipped the stock restore, flashed in Odin (PDA), and booted fine. I have 4G and texts working, but no calling (mobile network not available) and calling my phone goes straight to voicemail. Also, it's very adamant about keeping me in Global mode over LTE/CDMA. This is the same state I was in earlier while running Hyperdrive, except now I don't have root.
I feel like I've tried everything there is to try. Does anyone have any further suggestions?
Are there any areas of software that don't get reset when flashing the stock images in Odin, and that could have been corrupted from the bad flash?
Thanks.
It's probably also worth mentioning that I'm warned about there being no mobile network when I send texts. I can cancel the dialog and they still go through. People can text me without issues.
espacex said:
No luck :/ . I unzipped the stock restore, flashed in Odin (PDA), and booted fine. I have 4G and texts working, but no calling (mobile network not available) and calling my phone goes straight to voicemail. Also, it's very adamant about keeping me in Global mode over LTE/CDMA. This is the same state I was in earlier while running Hyperdrive, except now I don't have root.
I feel like I've tried everything there is to try. Does anyone have any further suggestions?
Are there any areas of software that don't get reset when flashing the stock images in Odin, and that could have been corrupted from the bad flash?
Thanks.
Click to expand...
Click to collapse
I had the same happen to me when I was working on getting radio on MIUI ROM, after tinkering with the Sprint version, only 4G would work, and occasionally roaming would work. Every time I tried to make a call, it told me there was no mobile network available, and it constantly tried to switch into Global Mode instead of CDMA/LTE.
Sadly, the only thing that worked for me was getting my phone replaced with a brand new one. If you find anything that works please be sure that you post it, because someone else may end up doing the same thing.
Jonestown said:
I had the same happen to me when I was working on getting radio on MIUI ROM, after tinkering with the Sprint version, only 4G would work, and occasionally roaming would work. Every time I tried to make a call, it told me there was no mobile network available, and it constantly tried to switch into Global Mode instead of CDMA/LTE.
Sadly, the only thing that worked for me was getting my phone replaced with a brand new one. If you find anything that works please be sure that you post it, because someone else may end up doing the same thing.
Click to expand...
Click to collapse
Did you get it replaced via warranty? If so, did you need to do anything besides flashing a stock image in Odin beforehand?
Maybe try flashing the stock rooted ME7 that includes the new radios? Couldn't hurt at this point.
Edit: whoops, saw you already tried that
Sent from my SCH-I545 using xda app-developers app
Does anybody know whether ODIN / recovery deletes the partitions before writing new ones? If a file existed in the ATT rom, but not in the Verizon one, would it still be on my phone if I flashed the Verizon rom over the ATT one? Obviously this assumes a data / cache wipe in between. I'm really talking more about the other partitions.
Also, does anyone have any experience trying to get a replacement via warrantee after flashing? I've read all about the binary counter on our model, but didn't see any success / failure stories yet from people returning phones after flashing stock + unrooting.
Last question for now: is there any reason to believe that taking the recent update would help my situation? Maybe that could reset whatever is causing my calling issue.... just a random guess. I know that I'd lose any chance of getting root back (at least for a while).
Thanks again for the help guys!
Not sure which forum this should be in so i'm asking it here. Apparently, I can't activate my new sim card for the 4G unless i'm stock, unrooted, locked bootloader. I guess I jumped the gun after I got my phone, but before I got the sim card and rooted, unlocked, etc. I think I know the steps to take to get it back to compltely stock, but I want to make sure.
I think I need to run the script and relock the bootloader, then flash the stock RUU file.
Is that correct? Is that the correct order? Am I missing any steps?
Thanks a bunch for any speedy repsonses because i'm in a bind right now and have to get this resolved by morning.
flyinjoe13 said:
Not sure which forum this should be in so i'm asking it here. Apparently, I can't activate my new sim card for the 4G unless i'm stock, unrooted, locked bootloader. I guess I jumped the gun after I got my phone, but before I got the sim card and rooted, unlocked, etc. I think I know the steps to take to get it back to compltely stock, but I want to make sure.
I think I need to run the script and relock the bootloader, then flash the stock RUU file.
Is that correct? Is that the correct order? Am I missing any steps?
Thanks a bunch for any speedy repsonses because i'm in a bind right now and have to get this resolved by morning.
Click to expand...
Click to collapse
I'm pretty sure being unrooted is not a requirement. Just install this ROM and boot the phone with your SIM inserted. It should activate fine.
OK. I will try that because I am having a heck of a time getting activated on my CM rom. Even had a Verizon tech trying to help me for over an hour.
I see that ROM requires me to flash a new boot.img. When I rooted, the directions said to flash dirtyracuns Hboot. Will flashing this one effect anything? If I change ROMs, do I need to flash DR hboot again?
Thanks for the info...
flyinjoe13 said:
OK. I will try that because I am having a heck of a time getting activated on my CM rom. Even had a Verizon tech trying to help me for over an hour.
I see that ROM requires me to flash a new boot.img. When I rooted, the directions said to flash dirtyracuns Hboot. Will flashing this one effect anything? If I change ROMs, do I need to flash DR hboot again?
Thanks for the info...
Click to expand...
Click to collapse
Boot and HBoot are two very different things. Flashing different boot images will not affect your engineered hboot.
You definitely don't want to talk to vzw reps if you're running cm. The more tech support requests they get from users running non-official builds, the less likely they will be to ever allow phones with unlocked bootloaders on their system.
Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?
flyinjoe13 said:
Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?
Click to expand...
Click to collapse
LTE/CDMA should be fine
simlar problem
flyinjoe13 said:
Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?
Click to expand...
Click to collapse
I am having a similar activation problem. What did you do to fix the radio? My problem started a few days ago.
I found the RUU for just the radio and applied it. No change. I get a LTE signal but the phone doesn't know it's own number and thinks it is roaming.
I followed the steps in this thread to restore my radio: http://forum.xda-developers.com/showthread.php?p=45476579#post45476579
Unfortunately, I never was able to get the radio to work with any of the CM based ROMs so I have ended up using a stock based ROM. ViperLTE. It is an excellent ROM and works great, but I got the phone recently so that I could run CM ROMs. Had I known I was going to have so many problems, I would have waited until February when my upgrade date came up and got one of the newer phones. I guess I still can, but I'd hate to waste the money I paid for this phone so soon.
sim issue
Turns out my SIM was actually bad. When you looked in the about, the SIM id number didn't show up. It had worked under 10.2 stable for several weeks before it stopped working. It had gotten worse over a week or so. At first a reboot would fix it. I did a clean flash of CM 11 at this point. After replacing the SIM the id number showed up but still couldn't make calls.
The problem went away after restoring a CM 10.2 back that had worked. I then did a dirty flash of CM 11 over it, with the kit kat gapps. It all worked out fine. I am speculating that a clean flash of CM 11, might not work.