On a lark yesterday, I tried using an HP Synaptics stylus with the 7840. It works. I might assume that the Dell Synaptics stylus works as well. Doesn't work with WACOM or N-trig or S-pen. Works with Synaptics.
Downloaded Google Handwriting from the Play Store. It works.
I can draw, navigate, write, browse all with a stylus.
Unadvertised, but thank you Dell.
7840, Lollipop 5.0.1, Rooted.
This is exactly what I need to know . . .
yet I'm not sure I understand.
Just got this Venue 8 7000/7480 tablet as a Father's Day gift, have spent hours trying to figure out if there's a stylus/app that would work for handwriting that saves the notes as a text file. It is still in the box actually, didn't want to open it as this function is a deal breaker for me since I'd like to use it in meetings at work.
My confusion comes from frankly not knowing the difference between types of stylus inputs and the only one the Dell website lists under accessories wouldn't seem to work for writing, it has the larger mesh bulb that appears to be a replacement for a finger.
Dell Chat wasn't worth a chit, they only gave me a link to tech that was dead.
I did see that Dell lists "Active Stylus 750-AAGN" but that doesn't show as compatible with this tablet - is this HP stylus in your post the same thing and is that why you suggest it would work?
Any advice would be appreciated here as I decide if I should keep this or return it.
Thx
The HP active stylus (Synaptics-based) is here: http://www.bestbuy.com/site/hp-active-stylus-silver/1169103.p?id=1219473261320&skuId=1169103
The Dell active stylus you mention utilizes the same Synaptics technology as the HP and as does another active stylus from Acer (I think). You are correct in that the Dell stylus is not listed as being compatible. That being the case, Dell might in the future remove the functionality in a firmware update.
One thing noticed is that there is no indication on the screen if the stylus is hovering just above the surface (a small dot or arrow, for example).
After playing around with this stylus and the 7840 for a couple of days, I'm pretty happy with how well it works. I haven't found a calibration routine or app, but haven't found a need to use one yet, either, so that is good.
As for the experience, I'm just getting started. The Synaptics technology is in its infancy and is not as flexible as WACOM or N-trig -- fewer levels of pressure sensitivity (important for artists), for example. The handwriting recognition and accuracy is a function of the Google handwriting app and it seems to work pretty well and quickly in recognizing my mediocre penmanship.
Much obliged. Maybe I should put my 15y/o tech consultant on it to investigate further since he was responsible for selecting this model in the first place. Otherwise he'll just fight with his little brother all day while not mowing the lawn.
And again, pardon my ignorance, but since you have rooted your device would that have anything to do with "unlocking" this feature? He could root mine if needed.
You're very welcome. I don't know if rooting affected the implementation of the stylus. I wish I had tested before upgrading from KitKat or rooting.
We'll see how it goes.
As far as I know, any 'active' stylus should work e.g. stylus with a battery. I've been using the joyfactory x1 recharchable (cant post link, not enough msgs) through a anti glare screen protector for about a month with no issues, only downside is that unless you get a blue tooth stylus there is no auto palm recognition so you cant be lazy and put your hand down.
Incorrect. Active stylus such as those based on N-trig technology (Surface 3 (Pro), Sony Vaio, older Fujitsu) do not work. The joyfactory x1 is another technology that generates an electro-magnetic field that simulates a finger, thus would work on almost any tablet with a touchscreen.
Oops, thanks for the clarification!
TonyBigs said:
Incorrect. Active stylus such as those based on N-trig technology (Surface 3 (Pro), Sony Vaio, older Fujitsu) do not work. The joyfactory x1 is another technology that generates an electro-magnetic field that simulates a finger, thus would work on almost any tablet with a touchscreen.
Click to expand...
Click to collapse
I have been using my Dell Stylus from my Venue 8 Pro and it works great. It supports palm rejection and the second button works as an eraser in apps like sketchbook pro.
That is correct, the Dell stylus used for the Venue 8 Pro (and certain other Dell) is Synaptics-based.
thanx OP I was looking all over the internet for someone who had tested stylus on Venue Android and never found anything.. I ordered the Dell one 750-AAGN and it works a lot better than I expected, not as good as my Ntrig surface pro 3 but pretty close and that is perfect for an active stylus that according to their costumer support was not compatible with my device.
I am currently using Papyrus for note taking I use Microsoft Onenote on all my other devices but for some reason I get like 2 seconds delay from pen and finger on onenote. Its been a problem I have been having since I bought the tablet maybe is a hardware compatibility issue. App works great on my other tablets without delays... I wish I could get it to work on the 7840.
In case anyone else is looking for active stylus for Dell Venue 7840 Android the Dell 750-AAGN works great!
The secret still works with 5.1, rooted!
Not working with European version?
I've bought the Dell Venue Active Stylus 750-AAHC, which should be the same pen as the 750-AAGN one except that it is sold in the EU. Unfortunately it does not work with my Dell Venue 8 7840 at all. Do you guys have any clue if there might be a (also secret) difference between the two versions? Or might my tablet be incompatible to Synaptics stylus at all? Any hint or idea would be appreciated.
Nobody got a clue? I contacted the Dell Support which claims that there isn't any technical difference between the EU and the US model of the stylus. Also there is no difference between single devices having the same model number. Anyway they also say that they do not have any information about the used technology or at least they do not want to support any unofficial feature. So all in all nothing really new that could solve my problem.
Is the stylus actually working (test stylus on another Synaptics device)? Battery polarity correct?
Also, I don't see any on-screen identification (pointer, dot) that the stylus is detected. It just works.
Ok, so I got myself an active stylus, the 750-AAHC, the european model. It works, perfectly. I contacted the Dell support and they confirmed it´s officially supported. No clue why they don´t advertise that. I mean seriously, a 4K! display and handwriting? That is amazing. And not only that, it even supports palm rejection - you can use it like actual paper.
Meaning: That tablet just got even better.
Illux said:
Ok, so I got myself an active stylus, the 750-AAHC, the european model. It works, perfectly. I contacted the Dell support and they confirmed it´s officially supported. No clue why they don´t advertise that. I mean seriously, a 4K! display and handwriting? That is amazing. And not only that, it even supports palm rejection - you can use it like actual paper.
Meaning: That tablet just got even better.
Click to expand...
Click to collapse
Interesting information, thanks. So I guess either my pen or my tablet is broken. Will test it with another pen asap.
The Dell support really confirmed it as an official feature? That's really strange as they denied it before.
By the way, the tablet has a high resolution display, but it isn't 4K.
Gesendet von meinem SM-G900F mit Tapatalk
I've bought another 750-AAHC stylus, but it isn't working, either. So I guess either my tablet is broken (since the very first day) or the stylus feature isn't supported by all 7840 devices. The second option would explain why it isn't advertised by Dell.
Venue 10 7040 works too!!
Just recieved my venue 10 7040 tablet. On a hunch (due to this thread) I preordered a 750-AAGN stylus hoping it would work....well surprise surprise it works perfectly. No hover pointer but it swipes, selects, scrolls and seems to have the palm rejection everyone else is talking about while I'm drawing. Totally impressed. This is getting pretty close to my dream device, 2-in-1, OLED, digitizer stylus...only wish it was 12" and Windows 10, but for now this is awesome.
Thanks OP. To those having issue with the 750-AAHC I'd suggest trying the 750-AAGN if possible since I thought the AAHC was for wacom devices not synaptics.
Works for me, too, on a new Dell Venue 10 7000 (7040) with 750-AAGN stylus. I sweat for an hour or so and was disappointed that it didn't work at first. After the Android 5.1 update everything worked like a charm.
Responsiveness and functionality varies tremendously between applications:
Autodesk Sketchbook is by far the most responsive. Recognizes the 3rd button as an eraser. No pressure sensitivity.
OneNote and Evernote have considerable lag. This can be improved by reducing the pen size (drawing fewer pixels?). No eraser. Some challenges with registering palm presses as finger input.
Squid slightly worse than OneNote and Evernote, in my experience.
LectureNotes (Trial Version) seems very responsive. After configuring a few options it maps buttons 2 and 3 to erase. Seems very nice.
Google Handwriting Keyboard is a bit of a disappointment. Not so responsive, but thick pen.
Keep in mind that I am left handed, so palm rejection is likely more critical for me as I almost always have a hand on the screen when writing.
Related
i want to use a stylus to write a note. but i don't know how gtab suppot stylus.
i hope anyone can help me
thanks a lot.
PS:my english is very terrible
I am also looking for a stylus but so far no luck. Anyway, I will let you know if I find one that works.
Welcome to the forum.... what nationality are you?
You'll need a stylus that's compatible with a capacitive touchscreen. Something made to work with Ipad or Xoom. You can also make your own with a piece of anti-static bag (the silver ones).
do you know any app note suppot stylus well?
I have never tried a stylus with the Gtab. You could try the canvas app in Gojimi's ported adam apps thread, but you'll probably need to search for a notes app that will work on the Gtab with a stylus for your purpose.
Gojimi's Adam Apps for Gtab Thread
2 apps
multiNote and NoteEverything can make notes with a stylus. As the previous poster said, get one that is iPad compatible. I find that the notes don't work as well as a tablet PC stylus.
I purchased a stylus from Amazon which is sold by BoxWave. It's just a generic capacitive stylus.
I've not been really impressed with it, it seems like I have to push down fairly hard to get it to work.
I have not used it with any note-taking apps yet.
REVISED: I've been using it for a couple of weeks now, and I like it. I am using it on my Aria as well. Very good for the price.
http://www.youtube.com/watch?v=cpNVVKfv0lY
This one works. My friend has one for his ipad and i tested on my g tab. Not sure where you can get one though. The tip (unlike my other stylus) is not "rubber". It's soft (really soft) -> can be pushed in with minimal strength.
Edit: It seems to be from 3M and heres a video showing how soft the tip is: http://www.youtube.com/watch?v=QiA-pc2ssMA&feature=related
Edit 2: Im now stuck on Youtube because it seems utterly good! http://www.youtube.com/watch?v=RXgxAJf9j-g
I've tried 4 different Capacitive Screen styluses on my Tablet S, with no screen protector, and it requires me to push much harder than on any other tablet or screen I've tried it on.
Can anyone test this out on their Tablet S for me?
Is this normal? Or is this just a defect in the one I got? Give it a try and let me know please.
Ive never tried a stylus on any other tablet than the Sony one I own so I didn't know it was just an issue on this one but yes, the performance of the stylus is horrible.
The stylus didn't work very well for me either. The Nook color I have also didn't work very well. Pretty sure the capacitive touchscreens work differently between iOS and android so this may just be a "designed for ipad" kind of issue.
The problem I have is that I used it on the Xoom and ALL the other tablets they had over at Best Buy on display, and they worked flawlessly. Some of then better than it did on the iPads on display :-( damn it SONY, I think it's just a screen sensitivity thing... if anyone figures out how to increase this, let me know.
Why do you need a stylus anyway? If you really do need a stylus, you should have gotten a tablet that supports an active stylus by either Wacom or N-Trig for actual precision, and quality when writing. I know at least the HTC Flyer and one of the Lenovo tablets support this.
ilnewsome said:
I've tried 4 different Capacitive Screen styluses on my Tablet S, with no screen protector, and it requires me to push much harder than on any other tablet or screen I've tried it on.
Can anyone test this out on their Tablet S for me?
Is this normal? Or is this just a defect in the one I got? Give it a try and let me know please.
Click to expand...
Click to collapse
Hi,
A friend of mine recommended the Griffin Stylus, although he has an iPad2 he said that after trial and error with several brands, this one was near perfect.
I'm also looking into this, so that I can use the tablet as a notepad for classes - I have the apps installed already, all I have to do now is find the proper stylus.
Dunno if you guys didnt realize that there is a factory installed screen protector over the glass ( yes glass, mineral glass in fact). thats causing sensitivity issues.
If you read the manual it will tell you NOT to use a stylus. The Tablet S is not meant for anything other than your finger tip.
dberladyn said:
If you read the manual it will tell you NOT to use a stylus. The Tablet S is not meant for anything other than your finger tip.
Click to expand...
Click to collapse
Not according to the link below
http://store.sony.com/webapp/wcs/st...10151&langId=-1&productId=8198552921666381663
I searched all the leaflets and booklets that came with the tablet and could not find any evidence supporting your claim, I also went online to the Sony Forums and nothing about Stylus Pen issues - but it's still possible, as stated, that due to design/build characteristics, stylus pens work badly with the tablet.
So far, according even to my friend's experience on the iPad and the information at the Sony Store, I'm still hoping that maybe the Sony Tablet is just picky when it comes to Stylus Pens and we just have to do our homework before buying one.
I hope that's the case, as I'm planning on using this device for classes and so far, software-wise I'm all set, so all I need now is a suitable stylus pen to write with.
I'll let you know how it goes, but please if anyone else has any successful results on this, please share as well.
Hi, Maybe I am "mis-remembering" it. I believe if you click on the Sony Help Icon it will take you to a website with various tips and information. In there it will tell you not to use anything on the screen except for your finger tips. I should confirm this for you but I am tired and lazy. Anyways, I don't see the point in using a stylus with this tablet. To me, this is the kind of tablet you leave beside the couch or your bed. In my opinion it's not a travel / work tablet.
dberladyn said:
Hi, Maybe I am "mis-remembering" it. I believe if you click on the Sony Help Icon it will take you to a website with various tips and information. In there it will tell you not to use anything on the screen except for your finger tips. I should confirm this for you but I am tired and lazy. Anyways, I don't see the point in using a stylus with this tablet. To me, this is the kind of tablet you leave beside the couch or your bed. In my opinion it's not a travel / work tablet.
Click to expand...
Click to collapse
Couldn't disagree more, this tablet keeps surprising me, in a positive way.
Work is always relative, travel is just not so as this seems more and more as THE partner to have, but opinions come and go, of course.
As for facts, check the image below - and hopefully the stylus drama dies here.
Griffin stylus pen, GC16040 - 4.3" length, in an orange box.
I'm still to put the screen protector, will report back as it is done.
wickwire said:
Couldn't disagree more, this tablet keeps surprising me, in a positive way.
Work is always relative, travel is just not so as this seems more and more as THE partner to have, but opinions come and go, of course.
As for facts, check the image below - and hopefully the stylus drama dies here.
Griffin stylus pen, GC16040 - 4.3" length, in an orange box.
I'm still to put the screen protector, will report back as it is done.
Click to expand...
Click to collapse
I picked up the Griffin stylus GC16040 and it isn't working well with mine with the Sony screen protector on. I still had to give in a good amount of pressure for it to work.
Has anyone tried the stylus sold on the Sony store website?
I'm going to assume it'll work because Sony is selling it, and it says specifically that it is for Sony tablets. I'm going to place an order to try it out.
Yh
Evo 4G63 said:
I picked up the Griffin stylus GC16040 and it isn't working well with mine with the Sony screen protector on. I still had to give in a good amount of pressure for it to work.
Has anyone tried the stylus sold on the Sony store website?
I'm going to assume it'll work because Sony is selling it, and it says specifically that it is for Sony tablets. I'm going to place an order to try it out.
Click to expand...
Click to collapse
I got my screen protector from amazon today - not the official sony one, and another set of stylus pens - Groov-e, GV-CP2
Both stylus packs work ok, but with screen protector I do have to apply some little pressure, but I have to say that for me, it's basically the same as when writing with normal pen and paper...
I do notice a slightly more diffuse image due to the protector, and the griffin stylus is alot softer to use than the Groov-e ones.
Both work ok, but the Groov-e just seemed slightly rougher, when typing I get a subtle scraping sound...
I also noticed that not all apps behave the same with this, personally I liked genie writing best, whereas hand writing HD didn't feel so precise in capturing my strokes.
Sample 2 in attach.
wickwire said:
Yh
I got my screen protector from amazon today - not the official sony one, and another set of stylus pens - Groov-e, GV-CP2
Both stylus packs work ok, but with screen protector I do have to apply some little pressure, but I have to say that for me, it's basically the same as when writing with normal pen and paper...
I do notice a slightly more diffuse image due to the protector, and the griffin stylus is alot softer to use than the Groov-e ones.
Both work ok, but the Groov-e just seemed slightly rougher, when typing I get a subtle scraping sound...
I also noticed that not all apps behave the same with this, personally I liked genie writing best, whereas hand writing HD didn't feel so precise in capturing my strokes.
Sample 2 in attach.
Click to expand...
Click to collapse
Which screen protector did you get exactly?
Drawing in supernote is the same with your finger or stylus, not great. It misses some inputs when drawing. I'm sure with future updates it will get better. I'm using a targus stylus.
Sent from my Google Nexus S using XDA App
Stylus on Sony Tablet S
I bought these TOUCH SCREEN STYLUS FOR Huawei IDEOS S7 Slim Tablet
on ebay and tested them on my Sony Tablet S and Galaxy S phone.
It works 100x better on my galaxy s phone than on the sony tablet.
They do work on the sony but the sensitivity isn't there, a fair amount of pressure is needed in order for it to respond.
I'm also interested to see if anyone else gets a better result with the targus stylus that sony sells.
I created a short video to show the problem. Go to youtube and search for AntMoore23, go on my channel and watch.
I think for the Sony it has a special resin that allows the screen to have a better black response. I think maybe that's the reason why the stylus response is bad. Just something to keep in mind.
I use a griffin stylus (GC17125) with sketchbook pro every day and it work just fine.
I also tried to build my own stylus with a sponge and some other crap (try a search on youtube) but without success.
did anyone try using the Stylus used in the video here, they call it a Wacom Active Digitizer
http://youtu.be/oty4ukjSIjg
The active digitizer is not the stylus, it's part of the screen technology inside the tablet, similar to the Galaxy Note.
It appears that the Atmel maXStylus will be compatible with the touchscreen controller of the TFP. maXStylus claims to be able to sense a 1mm stylus tip.
"Atmel has announced an active stylus chip that delivers "accuracy and linearity of +/-0.25mm" on a capacitive touch screen from a 1mm diameter stylus tip, claimed the firm. The chip is installed in the stylus and works with touch screens using any of the firm's maXTouch E series touch controllers." - Electronics Weekly
The Prime uses the Atmel MXT768E controller, which should be compatible. It just needs the appropriate software to implement the functionality. "Devices with suitable screens require only a software update and no hardware changes." - Electronics Weekly
It also appears that ICS will have native support for their stylus. "As a co-engineering partner to Microsoft, the mXTS100 supports Windows 8 and the recently launched Android 4.0 Ice Cream Sandwich. " - EE Times
I'm a noob, so can't post links, but one can go to Atmel's site and easily find the info.
Now we just need a manufacturer to build them for a reasonable price.
--------------------------------
maXStylus mXTS100 for Handsets and Tablets
The maXStylus mXTS100 provides advanced active stylus capability for touchscreen controllers based on Atmel's maXTouch® E Series and future maXTouch technologies. This union simplifies touch system hardware and software while providing a state-of-the-art, inexpensive touch and stylus solution
Here you go. found a good article discussing it and provides a video of how well it works.
www.gizmag.com/atmel-maxstylus/20470/
I want this soo bad. I could totally replace my aging hp tc4200 tablet pc and my old wacom pad with this lil baby. Fingers crossed it makes it to the market!
Sent from my Transformer Prime TF201 using xda premium
Its really interesting, I'd love to know from Asus if this Stylus willl be supported.
I'd buy that in a heartbeat.
Sent from my Transformer Prime TF201 using Tapatalk
they say its as simple as adding the software support for it. no hardware changes needed. Of enough people showed interest, it could happen. As it would add another functionality to the Prime.
wow this would be amazing! The only reason I bought a tablet is because the primes keyboard dock gives it that added functionality for productive uses. This would make it even better in that regard.
demandarin said:
they say its as simple as adding the software support for it. no hardware changes needed. Of enough people showed interest, it could happen. As it would add another functionality to the Prime.
Click to expand...
Click to collapse
So would this mean each app would need its own support for the stylus?
Also I am guessing this isn't useable as a regular capacitive stylus?
Wow this is pretty huge news...it certainly looks like the specs are designed to be comparable with Wacom. It's a great size for a handwriting slate...and maybe if one day we could Shallot windows and onenote...lol getting way ahead of myself... I'm not sure from the write up if it will requires a manufacturer firmware update, or the required software can be included in an app and installed...but very cool.
Let's not let this thread fade too quickly...
Sent from my Transformer Prime TF201 using Tapatalk
Well, ASUS made the Supernote app. Maybe they have that stylus in mind already.
Sent from my Transformer Prime TF201 using Tapatalk
Holy...crap. I hope this sees the light of day! This would make the TFP the best tablet by far. I've always been jealous of HTC's implementation. I'll definitely be keeping up with this and hope we get it! This made my night. Thanks for the post.
My understanding is that the stylus will work throughout the ICS operating system as a capacitive stylus.
It's funny though, Atmel says that the MXT768E should be very accurate with even a 2mm stylus. I haven't had very good luck on my Prime with the three 6mm styli I've tried. It's my first tablet, so maybe my expectations were too high.
Perhaps the existing software can't handle the additional sensor points on the screen properly. Writepad Stylus shows a refresh rate of 30-50 Hz in debug mode, but Atmel's spec states a refresh of 150Hz.
rebtx said:
My understanding is that the stylus will work throughout the ICS operating system as a capacitive stylus.
It's funny though, Atmel says that the MXT768E should be very accurate with even a 2mm stylus. I haven't had very good luck on my Prime with the three 6mm styli I've tried. It's my first tablet, so maybe my expectations were too high.
Perhaps the existing software can't handle the additional sensor points on the screen properly. Writepad Stylus shows a refresh rate of 30-50 Hz in debug mode, but Atmel's spec states a refresh of 150Hz.
Click to expand...
Click to collapse
I think until we see ICS and thus fully supported drivers, we won't see what this thing is capable of. It also sounds like it's not something that ASUS specifically has to support--the stylus should just be supported once ICS hits. Now, as far as compatible software, I have no idea--will any notetaking/drawing app just automagically support the additional precision?
Can't wait to find out more. As someone mentioned earlier, with both a keyboard and a high(enough)-resolution stylus, this thing could be a notetaking beast.
Sent from my Transformer TF201 using Tapatalk
A pressure-sensitive stylus that could work on the Prime's display?
Sounds like a mini-sized Wacom Cintiq on a budget...
Some apps already support pressure sensitive stylus.
Autodesk Sketchbook Pro, Adobe photoshop Touch / idea , Picsay Pro and others are said to support it.
Just thoses 4 ones are more than enough to justify buying a pressure sensitive stylus.
When does this come out?
So I've been trying to find out when this stylus is going to come out and I can't find the answer anywhere. I've tried contacting Amtel, but there's no way to do that and there's nothing online about the release date. I've got the Transformer Prime along with the keyboard attachment and this was going to be my final piece for it. I want to use the photoshop touch app with it because it would be freakin amazing. So how do we get these guys to release it? I'm willing to pay $100 for it if need be.
Motorola Xoom2 Stylus any good for Prime?
Hi guys
while waitiing for my to be finished repairing Prime I was surfing the web and came across the Motorola Xoom2 Stylus.
Don't you think that would be something for the Prime too?
A link to an unboxing of the stylus:
http://www.youtube.com/watch?v=o_XKBNxK3EQ
To me it looks as if the Stylus was soft and pointed, so everything I need to take notes with the Prime.
What do you know about this?
I just got my prime a week and a half ago, and got a jot pro yesterday - and i'm not happy with it. It skips a lot, especially when writing lowercase e's and s's (it tends to skip the top half of both letters). I tried replacing the disk, and it didn't help.
I then tried the jot on my girlfriend's Visio VTab1008 (running gingerbread), and it worked extremely well! It was much more responsive, and picked up every slight movement that I made with the pen.
Therefore, i'm thinking it has something to do with the prime. Does anyone have any suggestions/insights?
I know that the prime has a Atmel® maXTouch™ mXT768E, which supports 10 finger recognition, and it is supposed to be top of the line, so I'm wondering if there is something i can tweak in the software to make the prime more responsive.
As I stated before, my prime is running Ice cream sandwich 4.0.3, and the visio is on gingerbread.
I do not have any experience rooting devices, so I would prefer a fix that does not include rooting the device, but i'm open to trying.
theching14 said:
I just got my prime a week and a half ago, and got a jot pro yesterday - and i'm not happy with it. It skips a lot, especially when writing lowercase e's and s's (it tends to skip the top half of both letters). I tried replacing the disk, and it didn't help.
I then tried the jot on my girlfriend's Visio VTab1008 (running gingerbread), and it worked extremely well! It was much more responsive, and picked up every slight movement that I made with the pen.
Therefore, i'm thinking it has something to do with the prime. Does anyone have any suggestions/insights?
I know that the prime has a Atmel® maXTouch™ mXT768E, which supports 10 finger recognition, and it is supposed to be top of the line, so I'm wondering if there is something i can tweak in the software to make the prime more responsive.
As I stated before, my prime is running Ice cream sandwich 4.0.3, and the visio is on gingerbread.
I do not have any experience rooting devices, so I would prefer a fix that does not include rooting the device, but i'm open to trying.
Click to expand...
Click to collapse
I wish I had an answer. I've got a jot pro and a tf201. There are times where it works exceptionally well and times where it skips lines. I find it's pretty temperamental, but I've chalked it up to variables. You're using something that is mimicking a finger, not a fine point. Differences in how it works on different devices could be anything from chemistry between glass/panel manufactures to it being software related to it being an issue of how you're holding the pen or the pressure on the disc. Just way too many variables...
I figure we're trying to draw on a glass screen capacitive screen. It's never going to be like a wacom or anything with a digitizer. The cost sort of reflects that. The jot is much better then other "fat" stylii I've used but I don't know if being the best of the mediocre is really anything to brag about.
On the plus, I'm really hoping the amtel active stylus is everything they show in this demo:
(search on youtube for amtel stylus, can't post links yet)
If it's 100 USD or under and works as promised I'm buying it without hesitation and selling off the jot.
theching14 said:
I just got my prime a week and a half ago, and got a jot pro yesterday - and i'm not happy with it. It skips a lot, especially when writing lowercase e's and s's (it tends to skip the top half of both letters). I tried replacing the disk, and it didn't help.
Click to expand...
Click to collapse
I have also experienced those same erratic problems with skips in writing on the Prime, with different styluses (Jot Pro, iFaraday, Dagi).
One tip to share: I have had much better results in writing consistency using the Zoom mode in apps like Writepad Stylus and Antipaper Notes. In Zoom mode as long as you keep the stylus pressed on the screen then the line is continuous (for the most part). The paid version of Antipaper has 7 different zoom levels, the free version only 1 level. Writepad has 1 zoom level.
Do you have a screen protector on your Prime? Not all of them work well with the Jot.
You can get TouchScreenTune off the market and increase the screen sensitivity as well as adjust the filter that ignores small movements.
I've got two different styli and one was practically unusable until I increased the sensitivity of the screen. After tweaking it worked about as well as I expected it to.
You can use the app for free to see if it helps, but the free version reverts to the default settings each time the TFP goes to sleep unless you donate and get a key.
I did see some people mention it helped a lot with the Jot Pro.
I Have a mediapad x2 on pre order and was wondering if anyone has tried to use a pencil/stylus with either the mediapad x1 or x2. According to this press release http://www.cypress.com/?rID=100374
and this press release http://www.prnewswire.com/news-rele...-generation-mediapad-x2-tablet-300105334.html
Both models should have hardware that supports stylus with as small ass a 1mm tip. Here is also a demo on youtube. https://www.youtube.com/watch?v=wmNk5xIEST8
They even mention palm rejection. While it wont be anywhere near as good as wacom, its a step in the right direction. Coming from a note phone this would be important to me. Can anyone confirm this is possible? It sounds like it should be included in all hardware using truetouch, not sure why they would disable the stylus option.
Samsung's stylus and common pen do not work on X1. Bare finger works but difficult to draw.
thanks for testing. I got impatient and emailed Cypres, the maker of the digitizer
to ask. This is the response.
"
No, not all TMA568 screens support 1-mm passive stylus with palm rejection, referring to TMA568 device summary datasheet which is available at:
http://www.cypress.com/?docID=50781
"Table 1. Device Ordering Information" on the second page:
some of the TMA568 have this feature, some not.
Let me know if you have questions.
Thanks
Roy Liu
You may view your ticket here:
https://secure.cypress.com/myaccount/?id=25&mycase=489394-2930705221"
Interstingly enough if you look at the chart every device with glove support has pen support. Did you have glove mode active when you tried the stylus? In theory it should work with a graphite pencil in glove mode due to heightened sensitivity.