After a flash gone wrong, I find myself with the tablet that does not start. The only solution is to stick to the PC usb port to read in APX MODE.
I am willing to take any test to restart.
Do not work the ADB and fastboot driver.
Instead in APX MODE works.
Tell me what to do ...
Related
Hi
when i use condi`s aoi to flash custom firmware it gets to a point
where it reboots and tell you to hold volume+ until recovery mode.
all the drivers work fin in normal mode but in recovery mode all i
get on computer hardware is yellow flag next to mtp driver and when
i try to install it reports a code 10 could not start device problem.
and there is no phone entry for adb.exe and tryed to install driners again
and it go`s fine but still no adb or mtp drivers for recovery.
i am on winxp pro.any ideas would be much appreciated.!
[edit]
sony tablet s not recognized by mtp and adb drivers-mtp show that device could not start. this is only in recovery mode!
phc1234 said:
Hi
when i use condi`s aoi to flash custom firmware it gets to a point
where it reboots and tell you to hold volume+ until recovery mode.
all the drivers work fin in normal mode but in recovery mode all i
get on computer hardware is yellow flag next to mtp driver and when
i try to install it reports a code 10 could not start device problem.
and there is no phone entry for adb.exe and tryed to install driners again
and it go`s fine but still no adb or mtp drivers for recovery.
i am on winxp pro.any ideas would be much appreciated.!
Click to expand...
Click to collapse
Need to manual install MTP. See here http://forum.xda-developers.com/showthread.php?p=22350827
Hi I tried to put my friends xperia P into fastboot mode on my windows 8.1 laptop. I have the android sdk and it works perfectly with my
galaxy s4. ADB recognizes my device. However on the P after enabling USB debugging nothing happens. The pc wont recognize anything. Even when i try to boot in fast boot mode the fastboot driver appears on the device manager and suddenly goes away and the phone begins to charge. Please tell me a way to fix this...
You can try this guide:
http://forum.xda-developers.com/xperia-u/issues/guide-fastboot-drivers-windows-8-1-x64-t2511210
So i want to flash the recovery image for my nvidia shield tablet, becaouse it isnt booting at all (and no, nvidia didnt killed it, i bricked it :crying: :crying: ) So i got the drivers for adb, but since i cant boot/start the device i cant use adb at all, because it isnt showing any conected devices. I cant access recovery mode either. idk why, but i didnt turn on the usb debuging, so can i do smth to fix this? I would be thankful to anyone who helps me!
Some wanker had posted wrong images for boot and recovery for S6000L. And since I'm a moron, i didn't take the files apart to check them.
Installing them bricked my tablet. So essentially I have no boot or recovery images on the device and was wondering if there's any way to revive it.
Tablet freezes if i start it in normal, fastboot or recovery modes, so that's out of the picture.
However, i think that "meta mode" still works (if indication of it working is displaying lenovo logo and having "meta mode" written on the bottom of the screen)
It's getting detected on "mediatek preloader usb vcom port" for a couple of seconds when connected to the PC, which means that i might be able to use adb to push a backup into the tablet (?)
Been scouring the internet for a while with no results. Is there, by any chance, anyone who can help me out?
Hey everyone
My tablet just doesn't start anymore
it's stuck on the Acer start up logo and I literally don't know what do to anymore
I found a thread which said that i needed to re-flash the Rom with SP Flash Tools
but i'm getting this error S_BROM_DOWNLOAD_DA_FAIL (2004)
tried changing download agent and unchecking preloader too still not working, tried all my pc usb ports still not working
the usb drivers are the official ones from the Acer website
I also tried to do an hard reset but i'm unable to go into Recovery mode
I do all the steps but the tablet just doesn't boot at all
the only thing i managed is to go into the fastboot mode, but adb doesn't find the device
if anyone could help me with this, I would really appreciate that.
Same thing here, but for me adb finds the device, maybe it's just faulty hardware?