Hey everyone
My tablet just doesn't start anymore
it's stuck on the Acer start up logo and I literally don't know what do to anymore
I found a thread which said that i needed to re-flash the Rom with SP Flash Tools
but i'm getting this error S_BROM_DOWNLOAD_DA_FAIL (2004)
tried changing download agent and unchecking preloader too still not working, tried all my pc usb ports still not working
the usb drivers are the official ones from the Acer website
I also tried to do an hard reset but i'm unable to go into Recovery mode
I do all the steps but the tablet just doesn't boot at all
the only thing i managed is to go into the fastboot mode, but adb doesn't find the device
if anyone could help me with this, I would really appreciate that.
Same thing here, but for me adb finds the device, maybe it's just faulty hardware?
Related
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Hey, I am new here so sorry if I'm posting in wrong board.
I rooted my P70 a while ago and everything was fine. Now I decided that I want to flash 5.1.1 on it. I proceeded to flash TWRP.
I tried it with SP flash on pc, I checked that my scatter file and recovery.img was correct. I opened the scatter file in SP, connected my phone and clicked download, but nothing happened. Only the phone started charging, I have enabled USB Debugging and developer mode. The bootloader was still the stock one. Why?
Next thing I tried is to put the recovery.img on SD card and downloading Uncletools, I flashed it and it asked me if I want to reboot in bootloader, so I did, but it was still the stock bootloader.
What am I doing wrong? Thanks a lot for any response.
Anyone got any idea?
Click download and conecting usb cable to hh
Hey,
I have the same issue. The phone is rooted but the SP flash tool will not do anything. I've read that it's because the USB drivers are incorrect. However I am unable to install the drivers as the phone does not show up under other devices but rather under portable devices. I tried to install the android sdk and use those drivers or ones I found on the web but none of them will take. I found the ADB device signed driver under USB devices in the device manager.
I am honestly at a loss here. Would be grateful if anyone has ideas I could try!
Thanks
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
acer iconia a3 a20 error sp flash fix
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
---------- Post added at 11:26 AM ---------- Previous post was at 11:21 AM ----------
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
hy friend use this sp flash tools v5.1515.00
this link download https://doc-0c-bc-docs.googleuserco...046/*/0B7XGoy6u4PgeX3ByYUNyWlpjZmc?e=download
go in sp flash tools then select scatter file where you download the rom on directory then check all,pres download ,now pres vol down and connect the usb to computer and tablet still press vol down,see the mtk usb on bar sp flash tools ,relese vol down and wait ,red bar,purple bar,yellow bar, ok circle , done ,now disconect the tablet and press power ,or check if have logo charger reput usb to computer.100 % tets by me work
I have a similar problem, but no error message...it just seems the computer can't see the tablet. I tried my Windows 10 machine and an old Windows XP machine I have lying around. I've installed several versions of drivers, and nothing. I'm so frustrated right now. @paulktm I tried your file, but there's nothing there. I don't get any kind of error message, the Win10 machine just acts like it sees the tablet for a second, then doesn't anymore. The XP machine sees it, but fails to install any drivers for it...even when I manually install them, they don't seem to do any good.
I'm so frustrated right now!!!
This is an old thread but maybe some poor soul finds it like I did and manages to get his device back as well.
I've had a lot of trouble with an Acer Iconia A3 A20 FHD that was stuck at the first logo screen. Powered off and connected to the charger it only showed the battery logo with the flash but no animation any more. Booting into recovery (Pwr+VolDn) worked but mounting the system partition didn't work.
SP Flash always aborted with the dreaded "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)" / "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)" although cabling and drivers were perfectly all right. Obviously Acer patched the preloader in order to lock out SP Flash's download agent - that's customer support - thank you [email protected]#%&!!!
Solution: Power off, start SP Flash download/readback/whatever, press VolUp *and* VolDn simultaneously and plug in the usb cable. This way the download agent should be able to do it's job. I also plugged out the battery all the time and this seems to be necessary.
Flashing worked as it should and the tablet booted nicely and I didn't even loose my apps and data since I excluded the USRDATA partition from flashing.
Good luck!
Hi
same problem, tablet bricked after installing custom recovery and on boot loop
tried to unbrik with but SPF tools, com port is working but the firmware won't upload...
I waited for ages.. nothing...
I tried a recovery with TWRP, and the phone seems to be bricked now without any way of booting into download mode or recovery mode itself. It's like it has erased itself from my phone. Would that mean that it's hard bricked and unrecoverable?
The 4060a shows up in MOBILedit software, but I'm unable to authorize. I have tried other flashing softwares to complete the task, but none has recognized the phone on the usb port. I have all the necessary Qcom drivers installed, as well as, ADB drivers.
please give me a clue here
thanks in advance
-BASS4GOA
BASS4GOA said:
I tried a recovery with TWRP, and the phone seems to be bricked now without any way of booting into download mode or recovery mode itself. It's like it has erased itself from my phone. Would that mean that it's hard bricked and unrecoverable?
The 4060a shows up in MOBILedit software, but I'm unable to authorize. I have tried other flashing softwares to complete the task, but none has recognized the phone on the usb port. I have all the necessary Qcom drivers installed, as well as, ADB drivers.
please give me a clue here
thanks in advance
-BASS4GOA
Click to expand...
Click to collapse
Same here minus using mobiledit. I've been trying to boot recovery for 2 days
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.