Q&A for [ROM][Full Android for Shield Console][v.1.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Full Android for Shield Console][v.1.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
USB Audio issue & Xposed installation Arm64
While I am loving having a standard android experience on my Shield Android TV, I don't seem to get any audio out via USB. The DAC I am using is locked to 24 bit 96khz and shows as being synchronised but I get no audio. Audio is still coming out of HDMI. Everything worked with standard firmware. The setting for preventing automatic USB audio routing in developer settings is switch off... anyone have the same issue and know how to resolve?
Also - as mentioned by another poster - I am receving an error when trying to install Xposded. The error message suggests that it is looking for the arm (32bit) version rather than the 64bit. I am pretty certain we should be using Arm64 - so am I doing something stupid when trying to install via TWRP?
Bee
no change with 1.6
boboskins said:
While I am loving having a standard android experience on my Shield Android TV, I don't seem to get any audio out via USB. The DAC I am using is locked to 24 bit 96khz and shows as being synchronised but I get no audio. Audio is still coming out of HDMI. Everything worked with standard firmware. The setting for preventing automatic USB audio routing in developer settings is switch off... anyone have the same issue and know how to resolve?
Also - as mentioned by another poster - I am receving an error when trying to install Xposded. The error message suggests that it is looking for the arm (32bit) version rather than the 64bit. I am pretty certain we should be using Arm64 - so am I doing something stupid when trying to install via TWRP?
Bee
Click to expand...
Click to collapse
Still not getting USB audio (24bit/96k) in the latest versions of the ROM. Is this a problem for anyone else? Really need USB audio so will need to go back to stock if this isn't going to be resolved. Happy to try and help with any troubleshooting.
Bob
USB devices DAC and DVB-T
Wow!, thanks Zulu great job!.
How works the rom with USB DVB-T tunner? somebody test it? Kodi recognizes it without special apps?
Discard: <--And with USB audio card? can you play one sound throught hdmi and another throught DAC simultaneously?-->
excuse my poor english..
Gud
Zulu99, thank you for developing this.
i like your full Android room for nvidia shield tv and i want install for my console
but i have some question If you do not mind
1- If i want to re-install the stock room How do it.
2- how i can unlock boot-loader.
3- i want step by step to install your room in my console
best regards and thanks to you
---------- Post added at 09:05 AM ---------- Previous post was at 08:59 AM ----------
Zulu99, thank you for developing this.
i like your full Android room for nvidia shield tv and i want install for my console
but i have some question If you do not mind
1- If i want to re-install the stock room How do it.
2- how i can unlock boot-loader.
3- i want step by step to install your room in my console
best regards and thanks to you.
Hi zulu99
if i flash your room can re-install the stock room after thats
because i like full android. and i want know is your room have arabic language
and how can make it step by step
best regards
Messed up big
Hello all.
So I followed this guide but I messed up on one crucial step. Instead of just wiping user data and cache I also wiped (system). In any case I was able to flash the ROM and it fully boots with all the sweet animations but it boots to a black screen. I only see the mouse and that's all.
If I hold the power button I only get the option to power off.
Any tips?
Note: very inexperienced with Android but overall technically inclined
please help need a zip to recover my system in adb sideload
hey guys need some help i soft breaked my device and need to flash the update 1.3 to get it back but i need it in zip form to get it to load in adb sideload its the only way to install on my shield console i have lost the driver and my computer wont recognize the drivers when i install manually need help bad
I have two questions.
1. I tested Ethernet,the rom can‘t work in 1000m，only 100m
2.vpn not use
3. I want to use nfs. But found no nfs file manager。
thanks!
could someone with privileges incluye a thread about dvb-t and dvb-t2 tests?
I'm noob in xda and have not publish 10 post yet
But I think it would be interesting to check the stv
capabilities with USB dvb t/t2 tunners especially
with the complete lollipop room
If the kernel includes all the requested modules
I will try to install a tvheadend to stream TV to
all the devices..... Like hdhomerun but with a 30$ tuner
With the x1 CPU I'm sure that can to connect 2
or more tunners to do pvr or stream different channels to devices
Thanks in advance and excuse me if is not the place to post this message
STVInterested said:
Wow!, thanks Zulu great job!.
How works the rom with USB DVB-T tunner? somebody test it? Kodi recognizes it without special apps?
Discard: <--And with USB audio card? can you play one sound throught hdmi and another throught DAC simultaneously?-->
excuse my poor english..
Click to expand...
Click to collapse
Gapps..?
I've rooted and installed the rom and working well. Very nice work! I am having problems installing Gapps. Perhaps it's the wrong version. The link sends you to a github link and I've used that. After flashing that gapps I still have no google services. Can you provide the gapps file name I need to download? thanks much
Fire TV box remote pairs fine
Was able to pair the Fire TV remote with this rom. Go into pairing, hold home button down on remote and refresh. Works great.
Hello guys. This rom is great, but I don't have Dolby digital sound anymore after flashing it. Anyone with the same issue? Any advice to solve it? Thanks.
Sent from my XT1563 using Tapatalk
---------- Post added at 12:05 PM ---------- Previous post was at 12:02 PM ----------
The Netflix app on stock rom had perfectly good Dolby digital sound...
Sent from my XT1563 using Tapatalk
Nvidia Shield controller no longer works after full Android is installed on Shield TV
I was able to install full Android on the Nvidia Shield TV. The problem I have now is that the Nvidia Shield controller no longer works. Is there any app available that would enable the Shield controller to work with the full Android on the Shield TV?
Thanks Zulu for the amazing work.
Any chance you could post the source for your ROM? I would love to do some hacking on it.
---------- Post added at 10:40 PM ---------- Previous post was at 10:17 PM ----------
phuongle1068 said:
I was able to install full Android on the Nvidia Shield TV. The problem I have now is that the Nvidia Shield controller no longer works. Is there any app available that would enable the Shield controller to work with the full Android on the Shield TV?
Click to expand...
Click to collapse
Nope, see the OPs post here: http://forum.xda-developers.com/showpost.php?p=62443196&postcount=233
Would this run decent with a 2gb Octa core Android box or is it specific for a nvidia box?
I would jump on this like a shot if the wireless controller worked
Sent from my SM-G920F using Tapatalk
Use it wired with a 3m mini usb..
Envoyé depuis mon SM-G925K avec Tapatalk
I would do but my dog would eat it lol
Sent from my SM-G920F using Tapatalk
Related
i have a maylong m270 tablet can anyone plz tell me,how to gain acesess to root,i cant find anything on this tablet,it is android 4.0.4 the kernal is 3.0.8 the build number is rockchip imm76d,any help would be very appreciated much .. thanks rod
Hi, if you searched for it on Google and XDA (as I just did to check), it likely has not been rooted yet. Sorry! The best thing you could do is to google search and search XDA every week or so, maybe something will turn up soon!
I might get one of these, as they're $100 on Target's website for Cyber Monday.
Not enough people have them for someone to invest the time into rooting, but a common root method might work...
M-270
pkopalek said:
I might get one of these, as they're $100 on Target's website for Cyber Monday.
Not enough people have them for someone to invest the time into rooting, but a common root method might work...
Click to expand...
Click to collapse
Got mines at walmart for $79. I have the same kernel as him except my firmware version is 4.0.3.
Still can't find anything on this damn tablet. Almost wish I didn't buy it heheh.
Supposedly root is available on M-270 but I still can't install Superuser. su is present in xbin too. I tried to use superoneclick and it said it was rooted then I tried to continue with root anyway and it froze. Has anyone had this problem and found a solution yet?
vcsack said:
Supposedly root is available on M-270 but I still can't install Superuser. su is present in xbin too. I tried to use superoneclick and it said it was rooted then I tried to continue with root anyway and it froze. Has anyone had this problem and found a solution yet?
Click to expand...
Click to collapse
Did you ever figure this out? I have the same tablet and want to root it.
Sent from my Triumph using Tapatalk 2
This Tablet is surprisenly fast... runs as smooth as a 4th Gen I POD.. haven't had any issues so far decent tablet to play around on... i do need a root as well just so i can mod some game files GAMES run super smooth even intense graphics like shooting games... no lag at all colors are rich i was very surprised because of the price i thought it was gonna be a bust.. but with an HDMI slot SDslot.. no special charger needed just use any new phone cords, a 1GHZ processor running ICS (Ice Cream Sandwich) ITS A GREAT TAB! runs great haven't had to long to comment on battery life but i do suggest if u want a tablet to start out with get this one... really nice and fun! Please notify me of any updates on this topic i suggest a DEV go get one and play with us PPP
Thanks Guys Please Help Me Soon! -Spikebob
http://forum.xda-developers.com/showthread.php?t=1886460
I successfully rooted my Maylong M270 by using the software in the linked thread. I was able to install Google Play, and from there I updated SuperUser and BusyBox. Titanium Backup works properly. Without a custom kernel, overclocking is impossible for the moment, and I'm not too sure on how a kernel (or custom recovery and ROM for that matter) can be ported, but the root is here and working.
mtnickels said:
http://forum.xda-developers.com/showthread.php?t=1886460
I successfully rooted my Maylong M270 by using the software in the linked thread. I was able to install Google Play, and from there I updated SuperUser and BusyBox. Titanium Backup works properly. Without a custom kernel, overclocking is impossible for the moment, and I'm not too sure on how a kernel (or custom recovery and ROM for that matter) can be ported, but the root is here and working.
Click to expand...
Click to collapse
I call bogus on this post. I tried both means to root the Maylong M270 using this method and it does not work. Instead of just posting "I DID IT", why not help out the users and post HOW you did it... simply following the links and downloads on the post you've referenced doesn't do it.
Replying
rodlr said:
i have a maylong m270 tablet can anyone plz tell me,how to gain acesess to root,i cant find anything on this tablet,it is android 4.0.4 the kernal is 3.0.8 the build number is rockchip imm76d,any help would be very appreciated much .. thanks rod
Click to expand...
Click to collapse
I know it's been way long since the OP, but a tool called "ICS root" (can be found on SourceForge) will unlock this tablet. The device is a bit temperamental so once you run the .bat in terminal, you will have to manually restart and log back into the tablet before continuing each prompt at the terminal. Eventually after 2 -3 prompts, the .bat will be finished and the tablet will "update Android", a sign that you have successfully rooted.
Good luck all.
Root and Custom ROM at this link for Maylong M-270
CountXDA said:
I know it's been way long since the OP, but a tool called "ICS root" (can be found on SourceForge) will unlock this tablet. The device is a bit temperamental so once you run the .bat in terminal, you will have to manually restart and log back into the tablet before continuing each prompt at the terminal. Eventually after 2 -3 prompts, the .bat will be finished and the tablet will "update Android", a sign that you have successfully rooted.
Good luck all.
Click to expand...
Click to collapse
Sorry for the next several posts, but I REALLY want to contribute by bringing this knowledge here for this tablet.
---------- Post added at 10:52 AM ---------- Previous post was at 10:15 AM ----------
ksteffen said:
Sorry for the next several posts, but I REALLY want to contribute by bringing this knowledge here for this tablet.
Click to expand...
Click to collapse
However, I'm not allowed to post links, since I have not posted before. So I'm going to post this info in a series of posts, hoping that by the end, links will be allowed.
To find more info on your tablet there is an app in the Play store called CPU Identifier that will tell you what type of board you have in the tablet. Search for that board name on XDA to find rooting advice.
Sent from my Mid-9000 using XDA Premium HD app
Custom ROM and ROOT for Maylong M-270
But the short story is, there is a way to root this tablet, but even better there is a custom ROM available. HardcoreHacker over at "techknow dot me" has been working hard on this. The key to figuring this out was realizing the WM8950 SOC chip set used in this tablet is the same as the WM8850. They are interchangeable. The rom is called Uberoid and is Jellybean 4.1.1, and it works great. My tablet runs very well now, and doesn't lock up all the time like it used to. I also have a link where you can download the original firmware from Maylong. So I'm trying to get some posts here so I can do a proper link, however here are some ugly links to try.
Original Firmware:
maylonggroup dot com forward slash Tablet_downloads.htm
and Uberoid Link
3w's "dot" techknow "dot" me "forward slash" forum "forward slash" index.php?topic=5356.0
Again, I apologize for the very cryptic links - I will work on getting them posted properly. I have two of these tablets and both are running Uberoid. I'm very satisfied with it. The only issue I have (on both tablets) is the battery monitoring is very poor. But this is in the kernel I think because it is the same as it was before the custom ROM.
NOTE! - as you will see on the Maylong Site, there are two different models of this tablet - You can tell which you have based on your serial number, but I think this is a pretty important distinction. If you have the same model as I do, you are going to need JingHan_MID7_V715_8228_FT5206.fwc from the Uberoid List. My model's serial number is M2701204 which is in the same group as M2701202, M2701203, and M2701205)
ksteffen said:
But the short story is, there is a way to root this tablet, but even better there is a custom ROM available. HardcoreHacker over at "techknow dot me" has been working hard on this. The key to figuring this out was realizing the WM8950 SOC chip set used in this tablet is the same as the WM8850. They are interchangeable. The rom is called Uberoid and is Jellybean 4.1.1, and it works great. My tablet runs very well now, and doesn't lock up all the time like it used to. I also have a link where you can download the original firmware from Maylong. So I'm trying to get some posts here so I can do a proper link, however here are some ugly links to try.
Original Firmware:
maylonggroup dot com forward slash Tablet_downloads.htm
and Uberoid Link
3w's "dot" techknow "dot" me "forward slash" forum "forward slash" index.php?topic=5356.0
Again, I apologize for the very cryptic links - I will work on getting them posted properly. I have two of these tablets and both are running Uberoid. I'm very satisfied with it. The only issue I have (on both tablets) is the battery monitoring is very poor. But this is in the kernel I think because it is the same as it was before the custom ROM.
NOTE! - as you will see on the Maylong Site, there are two different models of this tablet - You can tell which you have based on your serial number, but I think this is a pretty important distinction. If you have the same model as I do, you are going to need JingHan_MID7_V715_8228_FT5206.fwc from the Uberoid List. My model's serial number is M2701204 which is in the same group as M2701202, M2701203, and M2701205)
Click to expand...
Click to collapse
Wow very helpful I'm trying this now, also it should be mentioned you have to be signed into Techknow for the link to work. If you're not it just looks like a bad link.
Spikebob21 said:
This Tablet is surprisenly fast... runs as smooth as a 4th Gen I POD.. haven't had any issues so far decent tablet to play around on... i do need a root as well just so i can mod some game files GAMES run super smooth even intense graphics like shooting games... no lag at all colors are rich i was very surprised because of the price i thought it was gonna be a bust.. but with an HDMI slot SDslot.. no special charger needed just use any new phone cords, a 1GHZ processor running ICS (Ice Cream Sandwich) ITS A GREAT TAB! runs great haven't had to long to comment on battery life but i do suggest if u want a tablet to start out with get this one... really nice and fun! Please notify me of any updates on this topic i suggest a DEV go get one and play with us PPP
Thanks Guys Please Help Me Soon! -Spikebob
Click to expand...
Click to collapse
I used SRSRoot on this device and it worked. My device is now rooted.
Q&A for [ROM][Linux/XBMC] Native Linux for Amlogic based Tv-Box's {08/24/2014}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
addons dont work
So, i'm sorry if my question was solved in last pages....
Install...done
XBMC works smooth
But i cannot install any addons, or skins or anything...
How i can solve this?
Thanks very much!
MX Linux on G18REF with build 6/5/14
I just received my generic "MX" box which is a G18REF and currently has build JDQ39.20140605. Kernel version is 3.0.50. I would like to install MX Linux on this box and am wondering if I needed to a firmware 1.1.5 downgrade first as I saw mentioned elseware. How can I confirm this? Thanks!
remote
Hi all,
great work, I have a vcom dv141d box I have tried the mxlinux and the openelec and I have the same issue, as soon as the image is applied the remote stops working, I can use a usb remote but the IR won't work, as anyone got any ideas how to get this to work again ?
Thanks for the great work
---------- Post added at 09:44 AM ---------- Previous post was at 09:26 AM ----------
Hi,
Thanks for the great work, I have tried the mxlinux image, when I convert using the stvmx conversion, my remote stops working I have a vcom dv141d box that's a g02 ref, everything works fine but I have to use a usb keyboard its like the IR as been killed, does anyone know how to solve this
Thanks
Jynxbox M1V2 Pure Linux
Hello everybody,
is it possible to flash this rom to the box mentioned on the title?
Thank you very much for your time and answer
G02 kernel source and config
Hi,
Thanks for these ROMs - working great on my ATV1220 (G02).
Please could you point me at the source code and config used for the kernel build? I see some kernel repos at https://github.com/CoreTech-Development but none that seem new enough given that the release changelog suggests that a kernel from March 2014 is being used.
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
@perro69
i was reading another thread and found that an openelec M8 image has been released :
http://forum.xda-developers.com/showpost.php?p=56366456&postcount=211
G02REF
I beleive on page 72 of MX-Linuxs thread it stated that gotham-beta2 was a working broadcom version on a droidstick a2
now yes i can get rc1 to work no problem but with no connection it was useless last year.
Excited reading about Vitaly_S work i flashed an old A2 stick laying around with BETA 2 (didnt work) and the next comment as an updated build MX_LINUX-G02REFDONGLE_170514.....
I apprecite everyone and anyones work over the past year roughly as i was watching this thread from the beginning
IE.. croniccorey and vitaly_S
just wanted to share that after upgrading screen goes black then after restarting stick its a greenish yellow.
so the AM6086A ------ A2 stick is not complient with this release
Thanks guys, any ideas otherwise please let me know.
Please help me
I got this box http://www.ebay.com/itm/201132479393?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT I think its a cheap mx 2 android tv box
and ive been trying to get xbmc to work on it with no luck, i flashed it with xbmc linux, I followed these steps - http://forum.xda-developers.com/showthread.php?t=2418029 and it worked without wifi but when i turnd the box off for the first time it wouldnt come back on so i sent it back for a replacement one. my new one should be here soon and the only thing i care about is xbmc. the problem i have with xbmc on android software it comes with is it works fine till i turn it off and back on then it only loads like 1min of my movies and its like wifi quits working or something, please help so i dont ruin another box. any help would be appreciated
Thanks
reefmonger said:
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
I just reread all 107 pages again to see if I missed something. Has anyone had success with these roms on Bluetimes mx5 g02ref meson6 ?
Sent from my SGH-I747M using Tapatalk 2
imx6 box
Hi, bought a mx clone from aliexpress want to upgrade the firmware, can I use matricon updates?
toothpick doesn't work
How to Restore your Recovery when toothpick doesn't work for mx android box?
MXQ S85
Hi
I bought this box from Gearbest. Its the MXQ S85 Amlogic S805 Quad-Core Multimedia Android 4.4.2 TV Box
I am looking to load Linux on it for XBMC, any recommendations out there for versions available that will work? Thanks
Mygica atv1200 rebooting over and over
I tried to install the mx Linux build for atv1200 posted in the forum here. it said to run the conversion file first then flash the latest release for geniatech/mygica atv1200. I made the sdcard up following the instructions in the readme file included. when I popped the sdcard in and did the upgrade process, it booted to a screen with the Linux penguin, and a yellow progress bar. I seemed to finish then reboot. but it has been doing that same process over and over for the last hour, and it seems not to be working. I tried to revert back to android but it would not boot. I tried making bootable sdcard with geniatech uboot bin, and mygica rom, but it woin't boot. then I made the sdcard with the mx Linux conversion files again, and it boots, but just keeps rebooting with the penguin screen and the progress bar. any help would be greatly appreciated. seems like there are not a lot of people having the same problem cause I cannot find a solution anywhere.
mx2update.zip for v1.1.5 is corrupted
mx2update.zip for v1.1.5 is corrupted
I can open all the other version mx2update.zip, like 1.1.6, but not for 1.1.5.
---------- Post added at 06:57 PM ---------- Previous post was at 06:50 PM ----------
Hi,
How to un-brick this box.
G-Box Midnight rev 2.2, 4GB Storage, 1GB RAM, A9 Neon CPU.
was running "Linux inside, XBMC 12.2" tried to update to android firmware 1.2.2.
now only getting black screen. The blue light comes on, but none of the firmware i put on my 1GB SD card get me any display. I try holding the toothpick for about 2 mins, but no sign that it is working.
Can't get into recovery, even if i am there no way to be sure.
Can someone help me?
Thanks.
Amlogic M3
I managed to flash an early xios linux "the hydra" xbmc onto my amlogic droid stick but the wifi is completely gone which makes it hard to do anything. For some reason my unit doesn't have a bootloader, nor a reset button (so i'm doing the advancedlauncher -> sh -> reboot recovery way in xbmc) and there doesn't seem to be any other recovery roms available for it.
Figured i'd try the M3 linux from here, but apparently this is configured to assert a getprop for specific hardware. I can change that myself, but when i sign the zip my unit refuses to go past that verification. With this rom the signing verification is fine, but assertion fails. I can fix that myself but how did you go about and sign the zip? I've tried a few different ways (apksigner, jarsigner) to no avail. There is very little information on what recovery (3e) actually checks, any clues on how to resolve that? (All it says is signature verification failed when i sign, with test keys and self made other keys).
Best
Crypth
Which firmware for generic G18REF
Hi I purchased a generic MX2 G18REF,
Which firmware should I install Matricon 1.1.5 or 1.1.6 before installing Linux MX?
Thanks
Cheap DX M3 stick won't work.
I just flashed the M3 (f16ref) based one on my cheap Amlogic AML8726-M3 stick (1gb ram, 4gb nand, 1.5Ghz), this didn't quite work out and it seems i can't flash other stuff on it either now. Just want to warn anyone else trying this
Codesnake help needed
I have a square s802 M8. I recently tried several different OpenELEC zips, most zips received NO FOOTER errors and would not install but most of the ones that did install, did not have any access to wireless networks under OpenELEC settings. Including Codesnakes ROMs. They would not allow access to wireless networks. So, I finally came across a Russian zip on xbmc.ru that installed and it is the latest developer zip found at: OpenELEC-Amlogic.S82.arm-devel-20150113183017-r20272-g0481f0c.zip. After zipping it to the s802, I realized it is for the S82. It still worked but it seems to have some bugginess. It is getting stuck on the opening stream window and the working spinning wheel is getting stuck too often. I am used to Stane's MX Linux and got spoiled with speed. Please help, I need a network working .zip with audio/video synced properly and speed. Any suggestions on a more suitable ROM zip? All of codesnake's OpenELEC ROMs seem to not have wireless networks enabled. Is there a way to have ethernet hooked up after installing codesnake's zip and then get wireless by downloading a network setting addon or enabling an OpenELEC setting feature??
Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Q&A for [ROM][OFFICIAL] CarbonRom for the Exhilarate(i577) [NIGHTLIES]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL] CarbonRom for the Exhilarate(i577) [NIGHTLIES]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Replacing the boot file
Hello, I am the user of a samsung galaxy exhilerate. I was very excited to find this page so that the CM roms could work again. However I unzip the folder replace the boot file and rezip the folder and upon attempting install the installation is aborted shortly after starting. Is there something I have to do to the file besides rezip it? Sign it or something like that? I have read some tutorials about zipping apk files but nothing on zip files. Any help would be appreciated.
Edit: Downloaded winRAR which allowed me to open the zip file, replace the boot file and unlike doing this by default in windows the signature was still present, so I am good.
My other question: Why aren't the people posting these nightlies aware of the issue? I'm probably not understanding something about the development process because I am new to it, but I can't figure this out.
Edit: I would also like to report a bug in kitkat 4.4.4 on my samsung galaxy exhilerate. I am using the cyanogen mod nightly from Oct 31, 2014 with the boot file provided in this thread to make it work.
The issue is with bluetooth, when I make calls I only hear some popping noise when iniating the call, no words ever come through and they cannot hear me on the other end either. This worked fine with stock ICS but I have had these issues with 4.4.4 and cyanfox unofficial 4.4.2. While using my phone to make calls in my car through ford SYNC bluetooth works fine when I am called but does not work for outgoing calls, very strange as this is in contrast to it not working at all with my headsets (I have an old headset and a new one purchased last week)
I have found a this information from the android police website:
"For the first few years Android relied on BlueZ, a "protocol stack" originally developed by Qualcomm for the Linux operating system. Despite many limitations and missing features, BlueZ served admirably until Android 4.2 launched with a new stack dubbed Bluedroid, a project built jointly by Google and Broadcom."
My Exhilerate uses a Qualcomm for 4G as illustrated by a sticker on top of the phone (perhaps this hardware vendor is the same for the bluetooth function?) In this case it would stand to reason that moving to a broadcom based software after Android 4.2 could cause some issues for this phone. Is there any way to either use the old pre- android 4.2 software for bluetooth while keeping the other software the same, or better yet is there a workaround to get my phone to work with the broadcom based software?
So I recently got an Exhilarate and want to put a rom on it. I did CM on my previous phone so I'm not entirely new at this, however that one was a stable release.
I'm interested in Carbon for this phone but I'm wondering if there's any outstanding issues? I'd read that in the early days there were issues with the camera and sound. Are these resolved? Any others I should know about? I'd like to know before rooting my phone.
Thanks!
Current: Exhilarate (stock gingerbread)
Previous: HTC Aria (CM 7.2.x)
ColdSnowden said:
TheThe issue is with bluetooth, when I make calls I only hear some popping noise when iniating the call, no words ever come through and they cannot hear me on the other end either. This worked fine with stock ICS but I have had these issues with 4.4.4 and cyanfox unofficial 4.4.2. While using my phone to make calls in my car through ford SYNC bluetooth works fine when I am called but does not work for outgoing calls, very strange as this is in contrast to it not working at all with my headsets (I have an old headset and a new one purchased last week)
Click to expand...
Click to collapse
I have had that same crazy Bluetooth issue on every custom ROM on the Exhilarate (JB & Kitkat). I've searched all over the place for a solution and come up empty. It's my only issue besides not having enough internal storage space.
---------- Post added at 07:31 AM ---------- Previous post was at 07:25 AM ----------
kayeles70 said:
So I recently got an Exhilarate and want to put a rom on it. I did CM on my previous phone so I'm not entirely new at this, however that one was a stable release.
I'm interested in Carbon for this phone but I'm wondering if there's any outstanding issues? I'd read that in the early days there were issues with the camera and sound. Are these resolved? Any others I should know about? I'd like to know before rooting my phone.
Thanks!
Current: Exhilarate (stock gingerbread)
Previous: HTC Aria (CM 7.2.x)
Click to expand...
Click to collapse
The Exhilarate is a whole new phone with a kitkat ROM. I highly recommend CarbonROM with the Uber kernel (hyperlink in my signature). A strange Bluetooth in-call audio problem as discussed above is the only significant issue; Bluetooth works just fine for all other audio. Note...the July 31st nightly was the last one that will boot properly without replacing the boot.img file.
Camera works fine, however barcode scanning apps will show a black screen but still work.
Speaker volume is a bit low. Headset volume is reasonable.
boot.img
I think the boot.img link is broken. Can you upload the boot.img one more time please.
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
ColdSnowden said:
Hello, I am the user of a samsung galaxy exhilerate. I was very excited to find this page so that the CM roms could work again. However I unzip the folder replace the boot file and rezip the folder and upon attempting install the installation is aborted shortly after starting. Is there something I have to do to the file besides rezip it? Sign it or something like that? I have read some tutorials about zipping apk files but nothing on zip files. Any help would be appreciated.
Edit: Downloaded winRAR which allowed me to open the zip file, replace the boot file and unlike doing this by default in windows the signature was still present, so I am good.
My other question: Why aren't the people posting these nightlies aware of the issue? I'm probably not understanding something about the development process because I am new to it, but I can't figure this out.
Edit: I would also like to report a bug in kitkat 4.4.4 on my samsung galaxy exhilerate. I am using the cyanogen mod nightly from Oct 31, 2014 with the boot file provided in this thread to make it work.
The issue is with bluetooth, when I make calls I only hear some popping noise when iniating the call, no words ever come through and they cannot hear me on the other end either. This worked fine with stock ICS but I have had these issues with 4.4.4 and cyanfox unofficial 4.4.2. While using my phone to make calls in my car through ford SYNC bluetooth works fine when I am called but does not work for outgoing calls, very strange as this is in contrast to it not working at all with my headsets (I have an old headset and a new one purchased last week)
I have found a this information from the android police website:
"For the first few years Android relied on BlueZ, a "protocol stack" originally developed by Qualcomm for the Linux operating system. Despite many limitations and missing features, BlueZ served admirably until Android 4.2 launched with a new stack dubbed Bluedroid, a project built jointly by Google and Broadcom."
My Exhilerate uses a Qualcomm for 4G as illustrated by a sticker on top of the phone (perhaps this hardware vendor is the same for the bluetooth function?) In this case it would stand to reason that moving to a broadcom based software after Android 4.2 could cause some issues for this phone. Is there any way to either use the old pre- android 4.2 software for bluetooth while keeping the other software the same, or better yet is there a workaround to get my phone to work with the broadcom based software?
Click to expand...
Click to collapse
Where from can i download boot.img? No file bihind this link : 4shared.com/file/wu2n-FPZce/boot.html
sammy pi said:
Where from can i download boot.img? No file bihind this link : 4shared.com/file/wu2n-FPZce/boot.html
Click to expand...
Click to collapse
Here you go.
sammy pi said:
I think the boot.img link is broken. Can you upload the boot.img one more time please.
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
Where from can i download boot.img? No file bihind this link : 4shared.com/file/wu2n-FPZce/boot.html
Click to expand...
Click to collapse
Thanx
---------- Post added at 01:54 PM ---------- Previous post was at 01:35 PM ----------
shawnbrennan55 said:
Here you go.
Click to expand...
Click to collapse
How to flas boot.img with PhilzTouchRecovey?
sammy pi said:
Thanx
---------- Post added at 01:54 PM ---------- Previous post was at 01:35 PM ----------
How to flas boot.img with PhilzTouchRecovey?
Click to expand...
Click to collapse
Don't flash it. You need to delete the "bad" boot.img from the ROM zip file and copy this one into the zip file. Use a compression utility app like ZArchiver to do that. You can find it on the play store.
*sigh*
...how do I flash the boot.img?
PCJXM said:
*sigh*
...how do I flash the boot.img?
Click to expand...
Click to collapse
See my post right above yours.
NVM! I just saw the answer in this thread I was unwillingly forwarded to.
AND I had to wait to post.
:fingers-crossed::fingers-crossed::fingers-crossed:This the
Beelink MiniMX TV Box Quad-core A53 @ 2.02GHz Mali-450 GPU 2.4GHz WiFi 1GB RAM 8GB ROM HDMI 2.0 Bluetooth 4.0 Gigabit LAN from Gearbest
Score :Antutu V6.0 35332
[QRCODE]goo.gl/bThUaB.qr[/QRCODE]
Pros : Mini size, fast, silent, not heating, rooted, Kodi 16
Cons: No access to the task manager with the stock remote, requires a drag and drop from the bottom of the screen
Rooting
Is this box rootable?
1Gb Ram? no thanks.
Mootje2009 said:
Is this box rootable?
Click to expand...
Click to collapse
Yes,it's rootable
---------- Post added at 09:19 AM ---------- Previous post was at 09:13 AM ----------
devoidx said:
1Gb Ram? no thanks.
Click to expand...
Click to collapse
DDDR3 1GB RAM,onboard eMMC flash 8GB ROM.(Expand memory:Micro SD card 32GB)
How do you root it? I received mine today and I've been trying to find a root for it but no luck. Theres no buttons on the unit I have. Thanks.
Edit: nevermind, I got it.
~ via Xperia Z3, XDA App
boot screen
What is the best way to root this device and remove the boot-up screen.
Thank you
bouvier said:
What is the best way to root this device and remove the boot-up screen.
Thank you
Click to expand...
Click to collapse
Anyone? Plz tell me how to do it.
The device is already rooted from the factory. Just install super user and update the binaries.
Beelink mini mxiii change rom
Thnks for the info.
Can you please tell if it is possible to change the rom?
Again, thank you.
Just in case anyone is still figuring out to root/upgrade this - I managed to install Android 6.0.1 on my mini mx-g (16/2) by flashing Ugoos AM1 1.1.1 from their official website here; Mini mx (8/1) can flash AM2 1.1.1 instead
To flash TWRP, you'll need KIII Pro Android 6 TWRP which you can get from the file attached... (unable to find the original thread link! ):
SuperSU will be pre-installed in the above rom, but one can also install magisk by flashing the TWRP and getting the boot.img file from the file browser (also attached mine if it helps)
I also wanted to enable sony dual shock wireless support which was possible after following the guide in this amazing blog - Connecting ps4 dualshock joystick via Bluetooth to Android
Hope this helps someone!
Bonus: My intention was to run Google Stadia, unfortunately device too weak.