ive downloaded the 3.5GB 5.1.1 stock rom and trying to update through odin 3.09
assited by this guide
http://www.teamandroid.com/2015/06/...bofj-android-5-1-1-lollipop-stock-firmware/2/
when i start the flashing it just gets stuck on nand write start
nothing happens for several minutes
restarted the phone, still working like before, no update was applied
what to do next ?
first use latest 3.10.6 Odin..try if still no luck post a screenshot
thank you 3.10.6 solved it
but i still have the bloatware that came with the old version
i want a clean install, how do i do that ?
Wipe data cache and system in recovery before flashing.
before ?
well i already flashed it
so i need to wipe and flash it again ?
also, the stock recovery is enough or root and new recovery is needed ?
ended up wiping data , everythings ok now , thanks
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Apologies this is my first post and am asking for help but this is driving me crazy now!
I don't seem to be able to flash ANY ROM zip files through CWM. When I try to install a Rom it loads for about 20seconds, says "finding update zip" "installing update zip" then "zip installed " then when it reboots it is stuck in a loop on the Samsung logo start up screen (one with the yellow triangle to say it is rooted).
Only thing I can do to get it working is to flash a ROM (new stock ICS one) through Odin, then root and restore from my backup - the only backup that will work is my backup of the ICS ROM none of my other backups work CM7 / CM9 if I try and restore them I just get in to the same loop.
I have tried this loads of times now - factory reset, wipe cache, wipe Dalvik cache, format system partition. I have tried installing ROM zip files twice etc etc.
This went wrong when I flashed the new stock ICS ROM in odin then tried to do a restore to CM7 not sure what I have managed to do to get it like this.
Anyone any ideas of what I can do to get it so I can install ROM's via CWM again so I can get back to CM7 or CM9?
Any help much appreciated - thanks.
Flash a new CWM and root kernel.
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Hi, thanks for the reply. I have tried flashing a new kernel a few times now but still get the same thing when I try and flash a new ROM in CWM, the install takes about 20 seconds then the phone is stuck in a loop at the first boot screen.
Any more ideas on what I can do?
:edit:
aha fixed this now, I followed this excellent guide http://forum.xda-developers.com/showthread.php?t=1457458 on Fix an unflashable or soft bricked GSII had to do the bootloader to get it to work.
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Pureemousseline said:
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Click to expand...
Click to collapse
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
gee2012 said:
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
Click to expand...
Click to collapse
Well, problem is i cannot access recovery, but thanks for helping
Go in downloadmode and flash a stock rom with Odin. See item 2 and 3 in my signature
Sent from my GT-I9300 using xda premium
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Pureemousseline said:
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Click to expand...
Click to collapse
Well just installedit, still the same bootloop problem, just boot screen changes
Up, please help me, i'm so desperate right now
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
JJEgan said:
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
Click to expand...
Click to collapse
THANKS SO MUCH FOR THIS I MANAGED TO GO TO RECOVERY AND DO THE UPDATE AGAIN, NOW MY PHONE WORKS PERFECTLY WITHOUT LOSING DATA !!!!
Thank you really really much for this
Hi All,
OK, so I've soft bricked my S3, or so I hope.
It was fine when I took it off charge this morning, but at work I noticed that my pocket was getting oddly hot..
Took my phone out my pocket and the phone was stuck on the boot screen (the first one).
Went into recovery and tried a cache wipe, dalvik wipe, still the same, then tried a wipe data/factory reset, and the system kept rebooting before it finished the wipe!
Then I tried flashing the OMEGA ROM I had on my SD card and the aroma installer would start, but as soon as it tried to do any sort of wipe at the start, the phone rebooted again!!
So after this I decided to download the latest stock firmware from samsung-updates.com and flash via odin. The firmware flashed OK but then the phone would not start again, still stuck at the boot logo.
I then tried to flash the CWM recovery again from the samsung galaxys3 toolkit folder on my C: drive. When trying to flash this, it kept getting stuck at "NAND Write Start!!" and would not go any further. Now whatever I try and flash via ODIN it gets stuck at NAND Write Start!!
I also have tried flashing the latest .pit along with and separely to the ROM with the "Re-Partition" button checked in ODIN and it just fails every time.
Is there anything I can do? Or if I have to send it to the service centre, is there a way to reset the binary counter from download mode? :/ Mine is saying 7 counts.
anyone?
So I installed successfuly DoT OS on my Moto C, however when I customized my phone a bit, I messed things up and attempted to reset DoT OS to stock settings.
Ever since my phone has been stuck in an infinite boot to TWRP.
Followed this guide:
https://forum.xda-developers.com/showthread.php?t=2426426
I tried wiping Dalvik, Cache
Tried Re-flashing from scratch, wiping Dalvik, Cache, System, Data.
Tried installing a stock rom. Failed.
Tried installing Lineage OS. Still in the loop.
Please help
Today I tried formatting Cache and Data. Still no luck.
Try to flash another twrp and also one old version of stock firmware .
Teddy Lo said:
Try to flash another twrp and also one old version of stock firmware .
Click to expand...
Click to collapse
That totally did it! Now it won't even boot!
In an attempt to flash stock firmware with SF Tool I totally formatted the phone with Format + Download and in the middle of the process I got a message that the firmware cannot be flashed because the phone has a secure baseband and an AUTH file is needed, so now the phone has no firmware and won't boot at all.
I tried an AUTH file I found on the Internet, but it doesn't work.
I am now taking the phone to the service center in hopes that they will be able to flash back the stock firmware and revive it.
Send me you Model Number , and try to flash several times latest stock recovery with Format + Download in order to confuse your phone to be able to flash your phone without problem.
Don't panick , that can happen to everyone.
That error is probably because wrong twrp for that version that you want to flash .