[Q] Battery resets to 0% after reboot. - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hi there. Since last night, whenever I reboot my phone, it comes back up with the battery set to 0%, and it shuts back down. I know that the battery is still fine because I can sit in TWRP for a long time. If I plug the phone in, it'll boot up and the battery will report the state that it should be at. However, when I do plug it in (with the power off) it shows 0% on the screen.
Has anyone experienced this?
I'm running XtreStolite Pure Edition (a universal ROM found over on the S6 forums, and SimplKernel R4T.
Thanks!

I used this app to get rid off it..BTW after restart it can not must do it one more time..
https://play.google.com/store/apps/details?id=com.BoshBashStudios.advancedbatterycalibrator

Related

[Q] HELP!!!!!!!

My Aria was running CM 6.1.1 fine 'till all of a sudden it won't charge.....
Only when it's connected to a charger I'm able to turn it on and it goes straight to Recovery mode. After turning it off and on couple of times i manage to get it work but when i disconnect the charger it turns back off.
What should I do? I don't know what can be the problem. I tried to flash new ROM, including my backups but it didn't help.
Thank you!
did you run your battery completely down to 0%? clockwork has a known bug where if you plug the phone in while its turned off, it will load into a faulty version of clockwork.
i'd recommend leaving the phone plugged in, let clockwork show up, hit reboot now, and just leave it plugged in to see if it maintains a charge.
Hey,
Ive tried it. it won't charge and even if it does, the battery lasts for an hour or so ...
So the problem is with my battery?

[Q] Stuck in a bootloop with Siyan 3.0.1

Okay guys and guyettes, I flashed the Siyah 3.0.1 kernel to my lovely S2 but my battery died overnight and now the darned thing won't boot. Due to an issue with the kernel, it automatically tries to boot when the phone is plugged in to charge, but not having enough power to boot up the thing dies and tries again. Continuously. It won't go to recovery mode and if I try to launch download mode it tells me it can't because of the low battery and then starts bootlooping again. Please please help, I've been without my phone for a day and I'm away from home with limited internet access so I REALLY NEED IT D:
pull out the battery keep sometime out, and put back and leave it for 1-2 hours for charging....then boot and restore your previouse kernel
I've tried leaving the battery out overnight, but whenever I put it in and try to charge it just does the same thing. Automatically tries to turn on, doesn't have enough power to power on, shuts down, and tries again :-/
You need a new charger battery or find some way of charging your battery outside of the phone.
jje
Sent from my GT-I9100 using xda premium
cherryduck said:
Okay guys and guyettes, I flashed the Siyah 3.0.1 kernel to my lovely S2 but my battery died overnight and now the darned thing won't boot. Due to an issue with the kernel, it automatically tries to boot when the phone is plugged in to charge, but not having enough power to boot up the thing dies and tries again. Continuously. It won't go to recovery mode and if I try to launch download mode it tells me it can't because of the low battery and then starts bootlooping again. Please please help, I've been without my phone for a day and I'm away from home with limited internet access so I REALLY NEED IT D:
Click to expand...
Click to collapse
Did you use SetCPU or Voltage Settings app to tweak with the frequencies/voltages? Theres a high chance that the Siyah you flashed doesn't support the frequency you have on your device. Id tell you to go into that app and restore defaults.
I was on NEAK before and flashed Siyah on top of it and it constantly kept rebooting and then i realized that if you get constant reboots, they mention to play with the voltage settings.
Try it out, maybe lower it from 1200Hz to 1000Hz being the max.
Let me know if it helps!
Happened to me once when I let battery run down too much. I left it charging in bootloop for a while, then unplugged charger, boot the phone, and replugged charger.
Well that was the issue of the kernel but it was solved later. For ur problem try to charge ur battery using master charger. Also try to go to recovery mode while charging and charge for a while and reboot ur phone.
Sent from my GT-I9100 using xda premium
jzmtl said:
Happened to me once when I let battery run down too much. I left it charging in bootloop for a while, then unplugged charger, boot the phone, and replugged charger.
Click to expand...
Click to collapse
I've left it "charging" in bootloop overnight but it still won't turn on enough to set it charging properly :-( it also won't enter recovery mode so I can't leave it charging at that. My housemate back home has an S2 so it looks like I'm stuck without a phone until I can get back and borrow his phone to charge my own :-/
Hmmm. This is a long shot, but try this: plug the phone in. Then, while it is booting and the phone is still plugged in, take the battery out. (this used to work with my old Motorola Milestone - it would stay on even when the battery was out)
If it stays on, put the battery back in and hope for the best. Otherwise, you'll need to either acquire an external battery charger, or wait til you can borrow your buddy's phone to charge your battery.
Plese change such headings.....
A request to the members to change such headings...which directly give a bad impression of a product wich is an outcome of very hardwork of some dedicated devs....this may be only your case with Siyah kernel which might be a result of your earlier config, whereas thousands of users are using the same flowlessly....
thank you

[Q] S2 won't boot after battery depletion

Hi,
Few days ago I forgot to reload the battery. Now that I try to bootup the gt-9100 it only shows battery logo with loading sign. It won't react to any button presses, so i can't get to download mode or to recovery mode.
I flashed CyanogenMod 9 Nightly a week ago. It worked like charm until now.
Does some one here have any kind of suggestions I could try?
Thanks..
How can you be sure that the battery has enough energy to boot the phone as you can still see that it is charging? Eventually the battery should be reported as fully charged.
when it depleted i connected it to charger and left it there to a whole night.
it should have enough charge.
just tested some some key combinations and i got good results. when i push vol down + home + power before i put battery back to the phone, i get to the odin mode.
now i have to find usb cable somewhere.
I got it flash new rom to it. First time the problem still persisted.
After trying some new button combinations and after flashing cmw i got it boot up.
Few seconds after fully booted, it powered off and i got same battery logo that does nothing. I'm starting to wonder that the problem is somewhere in the battery or the battery charger system.
Yes, might be a problem of the battery or the charger. If possible you should first try this battery in another phone and/or another battery in your phone.
If you have the possibility to charge the battery outside the phone that too would we worth to try.
For me it looks like your battery is empty but I might be wrong.
Flashed it again with a samsung stock rom. Now its staying alive.
Now it notifies me every few minutes that "Charging paused. Voltage too high.".
The phone is not currently connected to charger.
My guess is that the battery has gone bad. Unfortunately i don't have any other batteries or phones that i could test.
I think i have to go and buy a new battery.
hakovala said:
Flashed it again with a samsung stock rom. Now its staying alive.
Now it notifies me every few minutes that "Charging paused. Voltage too high.".
The phone is not currently connected to charger.
My guess is that the battery has gone bad. Unfortunately i don't have any other batteries or phones that i could test.
I think i have to go and buy a new battery.
Click to expand...
Click to collapse
Actually, this sounds like the port may be bad. You could try cleaning it... But you'll probably have to replace it.

Freezing up when charging phone (after powering it off)

When your phone is powered off, and then connected to the charger, it appears that a separate rom or firmware of sorts is booted up which displays the charge indicator.
However on my phone this charge indicator would freeze up.
The screen will stay the same way as pictured in the attachment, even after I unplug it from the charge cable. The only way to get it to clear is to either remove the battery, or unplug it and hold the power button for 10 seconds causing it to reboot.
Reflashing my ROM again doesn't seem to help either (I am running an AOSP ROM).
Is there any way to fix it?
Replying to myself
I've found that the battery indicator screen would freeze up when I use AOSP roms, but when I used a rom like rXtreme, it works fine!
Seems like the battery charging screen is tied to the rom after all.

Galaxy s2 won't turn on after wipe /data

Hello everyone!
As title says ,my samsung galaxy II (CM12.1 flashed) doesn't give any signs of life.
Here is the story:
I turned off my phone this morning and plugged in charger.After hour i plugged off charger from my phone and tried to turn it on.As it was turning on it got stuck on samsung logo.Afterwards i went into recovery mode and wiped /cache.Everything was fine.Then i went to "factory reset" where problem occured...while it was deleting /data it got stuck.Few minutes later my phone suddenly turned off.After that moment it just won't turn on.I tried to get into recovery and download mode but phone doesn't react.When i plug in charger it doesn't react neither. Battery was at 50% when i tried to turn it on.
Before this, phone was running fine. But recently it was freezing a lot so i had to take off batery and put it back in.
Im not native english speaker so don't get mad on my "perfect" english
I hope someone will help me diagnose the problem
Thank you
Goodmorning.
....the same here..... sadly.
This is what I know regarding that unable to turn phone back on problem, perhaps can solve yours.
We know the S2 i9100 (and maybe the other variants too) has "problem" with battery levels. In my case, it won't surprise when I got (for example) 48% then drops drastically to 3% after reboot. The problem sometimes also occur when I reboot to system from recovery.
Regarding to your problem, try to recharge your S2 until 100% (in this case, phone is off completely), unplug the charger, then turn it on by holding the power button.
If the phone still won't turned on, try this tips as it always working for me. Plug the charger and try to turn the phone on (holding the power button). If the phone just go back to battery indicator screen (sometimes the screen will blinking once), here the problem.
From here, you need to see what kind of battery indicator image shown on the screen. If the image is a battery indicator with round progress inside it (and doesn't change no matter how long you expect to it), you need to press and hold the power button to restart. Repeat this until you got the image with battery indicator with ACTUAL battery level and bar shown. When you see this, unplug your charger, wait until the screen is completely off, then holding the power button to turn on the phone. In my case, this is always work.
If for some reason you never get the correct battery indicator screen after many tries, try to remove the battery off, wait for at least 15 seconds, put it back on, then try the procedure again.
Hope that help.

Categories

Resources