hello just wanted to know which rom is compatible with my tablet teraware'm from peru k707g, the tablet has the following information:
1gb ram
4GB internal storage
Supports internal 3g chip
7-inch ips
cpu rockchip rk3066
dual core 1.5ghz
android 4.1.1
kernel 3.0.8 +
dual camera 2 MP rear and 0.3 MP front
teraware says k707 model but there is nothing for this particular model or not what will be if generic or what? please help to set you a good rom, already has root and cwm............
Hola yo tengo el modelo sin 3g podrías decirme como la rooteaste? Gracias
Enviado desde mi Teraware K701H usando Tapatalk 4
Hi Guys
How to Increase recovery partition to create CWM/TWRP recovery
When i tried to create CWM/TWRP recovery error aborting recovery can't be repacked too large
MT6735_Android_scatter file attachement
Your recovery partition was 16 Megabytes. So no needs to do that.
Enviado do meu i7 através de Tapatalk
kr0m* said:
Your recovery partition was 16 Megabytes. So no needs to do that.
Enviado do meu i7 através de Tapatalk
Click to expand...
Click to collapse
Thanks for reply
Then how to create or install custom recovery
Search for it maybe already exists an recovery for your phone.
Enviado do meu i7 através de Tapatalk
Tengo un Xiaomi redmi note 3 pro que en el flasheo estaba en un 30% y me sale error espacio insuficiente, después de eso el miflash no me reconoce el dispositivo, ya no puedo entrar al fastboot ni al recovery ni al edl, tampoco enciende se queda con la pantalla negra y el led rojo parpadeando por un rato, le he desconectado la batería y el cable USB para ver si enciende con los dos botones de volumen mas el cable USB y no hace nada, no es asunto de controladores porque lo he instalado muchas veces a parte de que lo hice en varias computadoras y al probarlo con otros teléfonos si los ve pero este no, a ver si alguien me guía en esto.....
Mod edit - English translation added below:
I have a Xiaomi redmi note 3 Pro that flashing was 30% and I get error insufficient space, after that the miflash not recognize my device, I can not enter the fastboot or the recovery or the EDL, no lights are left with a black screen and the red lED flashes for a while, I've disconnected the battery and USB cable for lights with both volume buttons plus the USB cable and does nothing, is not a matter of drivers because I have often installed besides I did on several computers and test it with other phones if you see them but this is not, to see if anyone guide me on this .....
Enviado desde mi Mi-4c mediante Tapatalk
Only english pls. Your topic Will Be removed if not
Enviado desde mi Redmi Note 3 mediante Tapatalk
This is not the right section, it's dev not support.
Look like an hard-brick :
http://en.miui.com/thread-245347-1-1.html
I have a Xiaomi redmi note 3 Pro that flashing was 30% and I get error insufficient space, after that the miflash not recognize my device, I can not enter the fastboot or the recovery or the EDL, no lights are left with a black screen and the red lED flashes for a while, I've disconnected the battery and USB cable for lights with both volume buttons plus the USB cable and does nothing, is not a matter of drivers because I have often installed besides I did on several computers and test it with other phones if you see them but this is not, to see if anyone guide me on this .....
Enviado desde mi Mi-4c mediante Tapatalk
This is the same theme but in English
Enviado desde mi Mi-4c mediante Tapatalk
only english first
Now the problem is with mi flash tool you use
Use mi flash tool beta here is link
http://en.miui.com/thread-281979-1-1.html
And fasboot edl for reboot to edl from fastboot
http://forum.xda-developers.com/android/software-hacking/guide-how-to-reboot-to-edl-fastboot-t3394292
Either now your mobile fully discharge or may have battery
To reboot from edl to fastboot hold and press volume - and power button for 30 to 60 seconds it will reboot to fastboot mode and this use fastboot edl to boot in edl mode and flash the rom with new mi flash tool beta
As you said black screen and red led is blinking you are in edl mode use above methode to reboot and if not blinking recharge you phone i.e connect to charger to charge you battry because mobile battery is 0℅
Any help plz comments below
Already I have made this and several tutorials more and still with the same problem, have had that connect them two pin so miflash it recognize but at the time of flashing me gives always the same error: is has reached the end of the file. (0x80070026: Receiving hello packet.) And in Miflash vetoes me says: can not read from port COM 10
Enviado desde mi Mi-4c mediante Tapatalk
bravo07 said:
Already I have made this and several tutorials more and still with the same problem, have had that connect them two pin so miflash it recognize but at the time of flashing me gives always the same error: is has reached the end of the file. (0x80070026: Receiving hello packet.) And in Miflash vetoes me says: can not read from port COM 10
Enviado desde mi Mi-4c mediante Tapatalk
Click to expand...
Click to collapse
Sounds like you don't have the correct drivers.
Sent from my Redmi Note 3 using Tapatalk
Use testpoint methode
Sent from my Redmi Note 3 using Tapatalk
I have reinstalled the drivers and nothing
Enviado desde mi Mi-4c mediante Tapatalk
Exactly as is works in testpoint because if is with the keys of volume +-not me responds in nothing
Enviado desde mi Mi-4c mediante Tapatalk
what rom do you flash? (que rom flasheaste?)
Try to disable driver signature enforcement
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
Or if bootloader is unlocked install twrp and install full rom zip
About month ago i have same error. You need 64 bit windows (tested windows7 64 bit), conect your phone ONLY on rear usb port.
Sent from my Redmi Note 3 using Tapatalk
I had miui global 8 and I was installing the weekly 6.9.9 I have or had the bottloader officially unlocked
Enviado desde mi Mi-4c mediante Tapatalk
I currently have 10 Windows 64 bit, but the issue is that when I connect another Xiaomi all is normal and until I flashed, but with this nothing
Enviado desde mi Mi-4c mediante Tapatalk
I can not install the TWR because not connecting not see CMD when I enter the command says waiting for device, I've left all the time in the world and does nothing
Enviado desde mi Mi-4c mediante Tapatalk
Phone must be in fastboot mode, then instal twrp alka using command :
fastboot flash recovery twrp.img
Make sure you rename twrp to twrp.img
Then after succesfully, type in command prompt:
fastboot boot twrp.img
Your device will boot into twrp, and you can clean flash it.
But what happens is that not can enter or to the Recovery or to the fastboot, is as if the phone was in mode EDL but without respond and or to connect it, it light red only lights when it connect to the pc, the administrator of devices it recognizes but none of them Miflash not and when can connect them pin in my flash only me appears in name of the port COM not of the phone and therefore not is communicates me says that no can read the port
Enviado desde mi Mi-4c mediante Tapatalk
bravo07 said:
But what happens is that not can enter or to the Recovery or to the fastboot, is as if the phone was in mode EDL but without respond and or to connect it, it light red only lights when it connect to the pc, the administrator of devices it recognizes but none of them Miflash not and when can connect them pin in my flash only me appears in name of the port COM not of the phone and therefore not is communicates me says that no can read the port
Enviado desde mi Mi-4c mediante Tapatalk
Click to expand...
Click to collapse
Try to press & hold volume.down + power for 10 second or more, it will make your device boot to fastboot mode.
Hello I want to unlock the bootloader of my honor 9, I don't now if it works with dc unlocker?
Help please
Envoyé de mon STF-L09 en utilisant Tapatalk
djuls.amoux said:
Hello I want to unlock the bootloader of my honor 9, I don't now if it works with dc unlocker?
Help please
Envoyé de mon STF-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
DC supports only EMUI 4, 5 and 8 but up to Security patch 06/2018
For newer firmwares, try the following (screenshot) - Silver subscription should be enough:
https://support.halabtech.com/index.php?a=downloads&b=folder&id=59405
or ask if they support Honor 9 (Telegram group for unlocking Bootloaders with EMUI 9):
https://t.me/joinchat/MtyvC0TmAuRnwZ0cimIEag
I'm trying to install a stock rom on my Redmi 8a that has the system destroyed and also the bootloader blocked. I put it in EDL mode, and when trying through mi flash it asked for login, I'm trying through QFil and Qualcomm MTK Mi but both have the same error in sahara.
handshake failed [Sahara] Reading Hello - Handshake failed with PBL device!
what should i do to fix the error?
Note: After putting the device in EDL mode, I can no longer access fastboot.
Estoy igual, trabajndo para buscar alguna solucion.
GINKGOUL said:
Estoy igual, trabajndo para buscar alguna solucion.
Click to expand...
Click to collapse
Have you tried using Qfil to restore?